Esta tese focou em três tópicos principais: caracterização de filmes compactos de TiO2 e seu comportamento em células solares sensibilizadas por corante; estudo das propriedades fotoquímicas e fotofísicas de um complexo fotoisomerizável de rênio(I); elucidação das propriedades fotofísicas e eletrônicas de complexos de irídio(III) e suas aplicações em dispositivos emissores de luz. Filmes compactos foram automontados nos fotoanodos de células solares sensibilizadas por corante (DSCs), sob o filme mesoporoso de TiO2/corante, utilizando sols de TiO2 ácidos e básicos como cátions e ânions, respectivamente. A obtenção dos sols foi realizada sob controle absoluto para resultar em propriedades morfológicas e ópticas apropriadas para filmes compactos de alta qualidade, como indicado por perfilometria e microscopia eletrônica de transmissão e varredura. As DSCs com bicamadas de TiO2 melhoraram as eficiências de conversão em até 62%. Uma investigação detalhada por parâmetros fotoeletroquímicos, IPCE, tempo de vida do elétron e espectroscopia de impedância eletroquímica demonstrou que o contato entre o vidro condutor (FTO) e o TiO2 é melhorado e que a recombinação de carga no FTO/I3- é diminuída. O novo complexo fac-[Re(CO)3(Ph2phen)(trans-stpyCN)]+ foi sintetizado para apresentar o intercâmbio entre as configurações trans e cis do ligante coordenado por meio de fotoisomerizações eficientes e reversíveis. As fotólises em 313, 334, 365 e404 nm resultam em mudanças espectrais no UV-Vis e RMN atribuídas à fotoisomerização trans-cis do ligante stpyCN coordenado. O processo reverso cis-trans também foi observado com irradiação em 255 nm, com um notável rendimento quântico (&#934 = 0,16), de mesma magnitude que para o processo trans-cis (Φ = 0,38). A caracterização fotofísica e os espectros de absorção do transiente corroboraram na atribuição de um comportamento incomum para os estados excitados quasedegenerados 3ILstpyCN e 3MLCTRe→Ph2phen. Complexos heterolépticos de Ir(III) foram sintetizados e suas propriedades fotofísicas avaliadas, como rendimentos quânticos e tempos de vida de emissão, constantes radiativas e não-radiativas e coordenadas CIE. Os parâmetros fotofísicos variaram sistematicamente com variações nos substituintes retiradores ou doares de elétrons, como corroborado por cálculos TD-DFT, que mostraram uma mistura de estados excitados IL-MLCT. Três desses complexos foram utilizados na camada ativa de dispositivos emissores de luz e caracterizados optoeletronicamente por curvas de corrente-brilho-potencial e espectros eletroluminescentes. / Three main topics are discussed in this thesis: characterization of TiO2 compact films towards high-performance dye-sensitized solar cells; investigations of photophysical and photochemical processes of a Re(I) complex; photophysical elucidation of Ir(III) complexes and their application in light emitting devices. All-nano-TiO2 compact films were auto-assembled in the photoanodes of dyesensitized solar cells (DSCs), beneath the TiO2 mesoporous film, employing acid and basic nano-TiO2 sols as cations and anions, respectively. TiO2 syntheses were performed under absolute control to lead to appropriate morphological and optical properties to yield high quality compact films, as indicated by profilometry, tunning and scanning electron microscopy. DSCs with TiO2 bilayers on top of the conducting glass (FTO) improved the conversion efficiency up to 62%. A detailed study by photoelectrochemical parameters, IPCE, electron lifetime and electrochemical impedance spectroscopy demonstrates that the contact between FTO and TiO2 was improved and that the FTO/I3- charge recombination was prevented. The novel fac-[Re(CO)3(Ph2phen)(trans-stpyCN)]+ complex was synthesized to show switchable trans-cis configurations of the coordinated stpyCN ligand through efficient and reversible photoassisted isomerizations. Photolyses at 313, 334, 365 and 404 nm led to UV-Vis and NMR spectral changes ascribed to the trans-to-cis photoisomerization of the coordinated ligand. The reverse cis-to-trans process was alsoobserved at 255 nm irradiation, with a remarkable quantum yield (Φ = 0.16), in the same magnitude to the one for trans-to-cis photoprocess (Φ = 0.38). Photophysical characterization and transient absorption spectra provided insights on the light-driven trans ? cis pathways and indicated an unusual behavior for the 3ILstpyCN excited state, induced by an interplay with the quasi-degenerated 3MLCTRePh2phen state. Heteroleptic Ir(III) complexes were synthesized and phophysical properties evaluated, such as emission quantum yields and lifetimes, radiative and non-radiative constants and CIE coordinates. The photophysical parameters varied systematically with variations in electron-donating or -withdrawing substituents on the ligands, as corroborated by TD-DFT calculations that showed an IL-MLCT mixing in their emissive excited state. Three complexes were employed in the active layer of light emitting devices and had their optoeletronic properties characterized by current-brightness-voltage curves and electroluminescent spectra.

As metaloproteinases de matriz (MMP) são enzimas superexpressas em quase todos os tumores humanos, sendo que os subtipos MMP-2 e MMP-9 têm sido associados ao potencial metastático e prognóstico desfavorável em neoplasias malignas como, por exemplo, melanoma metastático e glioma. Compostos capazes de inibir a atividade destas enzimas podem representar potenciais agentes terapêuticos. O composto 4-nerolidilcatecol (4-NC), isolado de plantas do gênero Pothomorphe, apresentou resultados promissores para o tratamento do melanoma e glioma e foi capaz de atuar em várias etapas bioquímicas importantes envolvidas na progressão dessas patologias, inclusive inibindo MMP-2 e MMP-9. No entanto, o mecanismo de ação do 4-NC não está completamente elucidado. O presente estudo envolveu a aplicação de métodos de modelagem molecular e de formalismos do planejamento de novas moléculas auxiliado por computador, CAMD (Computer-Aided Molecular Design) a fim de explorar a interação entre esta molécula e as enzimas MMP-2 e MMP-9, além de planejar novos inibidores para estes alvos. Análise exploratória de dados, que compreende a análise de agrupamentos hierárquicos e de componentes principais. foi desenvolvida para um conjunto de hidroxamatos (N=64) descritos como inibidores de MMP-2 e MMP-9, a fim de identificar as propriedades moleculares que mais influenciavam o processo de discriminação dos compostos. As propriedades termodinâmicas, eletrônicas e estéricas foram importantes para descrever os compostos mais ativos no conjunto de dados da MMP-2. Para a MMP-9, o coeficiente de distribuição (ClogD) em pH 1,5 foi relevante no processo de discriminação do conjunto. A presença de substituintes volumosos na porção R3 parece ser crucial para o conjunto de inibidores investigados. Esta região está envolvida em interações moleculares com a cavidade S1 de ambas as enzimas, mas há um limite de volume a ser considerado para estes substituintes. O formalismo QSAR-4D independente do receptor (IR) foi aplicado ao mesmo conjunto de dados e permitiu estabelecer o mapeamento do farmacóforo, além de explorar diferentes alinhamentos para a obtenção da hipótese de conformação bioativa prevista pelo melhor modelo de QSAR. OS modelos QSAR apresentaram boa capacidade de previsão, auxiliaram na proposição de novos inibidores e estimaram a atividade do 4-NC. Com o melhor modelo QSAR para MMP-9 (N=64), a atividade prevista para o 4-NC foi classificada na faixa dos inibidores com atividade moderada. Entretanto, o melhor modelo QSAR obtido para MMP-2 (N=38) não foi capaz de prever, de forma adequada, a atividade de compostos com arcabouço químico diferente daqueles utilizados na construção dos modelos. Estudos de ancoramento molecular foram desenvolvidos para investigar a orientação do 4-NC no sitio catalítico das duas enzimas e as interações que poderiam ser estabelecidas nestes complexos. Duas conformações favoráveis foram encontradas. Simulações computacionais de dinâmica molecular foram desenvolvidas com os complexos mais promissores selecionados nos estudos de ancoramento, a fim de obter informações mais detalhadas e de maior confiabilidade. sobre suas interações intermoleculares. O 4-NC tende a se orientar no sítio de forma a acomodar sua cadeia lateral no bolso S1 adjacente ao sítio catalítico em ambas as enzimas. Ensaios de zimografia também foram realizados com o objetivo de elucidar possíveis contribuições da cadeia lateral e do núcleo catecólico do 4-NC na atividade inibitória frente às enzimas em estudo. O núcleo catecólico parece ser o responsável por sua atividade, pois o composto 1,2dimetoxibenzeno, que possui as hidroxilas bloqueadas por grupos metil, não foi capaz de exercer atividade inibitória significante frente à MMP-2 e MMP-9. Estudos de voltametria reforçaram a hipótese de que o 4-NC tem a capacidade de quelar os íons zinco presentes no tampão de incubação. / Matrix metalloproteinases (MMP) enzymes are overexpressed in almost all human tumors, and MMP-2 and MMP-9 subtypes have been associated with metastatic potential and poor prognosis in malignant tumors, such as metastatic melanoma and glioma. Compounds capable of inhibiting the activity of theses enzymes would be considered as potential therapeutic agents. The 4-nerolidylcatechol compound (4-NC), isolated from plants of genus Pothomorphe, has showed promising results in the treatment of melanoma and glioma, and was able to act in several important biochemical steps involved in the progression of these diseases, as well as inhibiting MMP-2 and MMP-9. However, the 4-NC mechanism of action is not completely understood. This study has involved the application of molecular modeling methods and formalisms of computer-aided molecular design (CAMD) in order to explore the interaction between 4-NC and MMP-2/MMP-9, and to design new inhibitors for these targets. Exploratory data analysis, which comprises hierarchical cluster analysis and principal components analysis, was performed to a set of hydroxamates (N=64). previously reported as MMP-2 and MMP-9 inhibitors, in order lo identify the molecular properties that is most critical for the discrimination process regarding the investigated compounds. The thermodynamic, electronic, and steric properties were: quite important to describe the highly active compounds in the data set of MMP-2, whereas the apparent partition coefficient (ClogD) at pH 1.5 was the property more relevant for MMP-9 data set. The presence of bulky substituents on the R3 moiety seems to be crucial for this set of inhibitors due to the molecular interaction with the S1 subsite of both enzymes. However, there is a limit regarding the substituents volume in this region. Receptor independent (RI) 4D-QSAR analysis was applied lo the same data set and it was possible to establish the pharmacophore mapping, besides to explore different alignments in order to generate the hypothesized bioactive conformation through the best QSAR model. The QSAR models have presented good predictability, assisted in proposing new inhibitors, and estimated the activity of 4-NC. Regarding the best QSAR model for MMP-9 (N=64), the 4-NC predicted activity was classified in the range of the moderate active inhibitors. The best QSAR model obtained for MMP-2 (N=38), however was not able to properly predict the activity for compounds with different chemical scaffold from those used to build up the QSAR model. Molecular docking studies have been developed to investigate the 4-NC binding mode into the catalytic site of the two enzymes and the interactions that could be established in those complexes. The results have shown two favorable conformers regarding the MMP inhibition. Molecular dynamics computational simulation were combined to molecular docking studies in order to obtain more detailed and reliable information regarding the intermolecular interactions of each complex. The 4-NC molecule tends to accommodate the side chain in the S1 pocket adjacent to the catalytic site in both enzymes. Experimental zymography assays were also performed to elucidate the possible contribution of the side chain and the catechol core in the 4-NC inhibitory activity against the MMP-2 and MMP-9 enzymes. The catechol core seems to be responsible for its activity, since the 1,2 dimethoxybenzene compound, which has the hydroxyl blocked by a methyl group, was not able to exert any significant inhibition on enzymes. Voltametric assays confirmed the hypothesis that 4-NC chelates zinc ions present in the incubation buffer.

Submitted by Renata Lopes (renatasil82@gmail.com) on 2016-07-21T13:54:37Z No. of bitstreams: 1 aecioflaviomeirellesdesouza.pdf: 588675 bytes, checksum: 84d528796e59a48f1e76239e179980a4 (MD5) / Approved for entry into archive by Adriana Oliveira (adriana.oliveira@ufjf.edu.br) on 2016-07-22T15:30:38Z (GMT) No. of bitstreams: 1 aecioflaviomeirellesdesouza.pdf: 588675 bytes, checksum: 84d528796e59a48f1e76239e179980a4 (MD5) / Made available in DSpace on 2016-07-22T15:30:38Z (GMT). No. of bitstreams: 1 aecioflaviomeirellesdesouza.pdf: 588675 bytes, checksum: 84d528796e59a48f1e76239e179980a4 (MD5) Previous issue date: 2011-10-10 / Objetivos: verificar a prevalência de resistência insulínica (RI) em portadores de hepatite crônica C não diabéticos e analisar o impacto da mesma sobre os parâmetros laboratoriais e histológicos. Sujeitos e métodos: foram incluídos no estudo 82 pacientes e amostras de sangue foram coletadas para determinação de glicose, perfil lipídico, ALT, AST, ferritina, HOMA-IR, carga viral e genótipo do VHC. HOMA-IR superior a 2,5 foi considerado resistência insulínica. Resultados: RI foi observada em 27% dos pacientes e foi associada a idade, circunferência abdominal e índice de massa corpórea. Quando comparado a pacientes sem RI, aqueles com HOMA-IR superior a 2,5 apresentaram graus mais acentuados de fibrose hepática e atividade necroinflamatória, maiores níveis de aminotransferases e esteatose hepática mais freqüente. Conclusões: É comum a presença de RI em portadores de hepatite crônica C e esta tem como resultado a acentuação da fibrose hepática induzida pelo vírus da hepatite C. DESCRITORES: Hepatite crônica C, fibrose hepática, resistência insulínica, HOMA-IR / Objectives: To determine the prevalence of insulin resistance (IR) in patients nondiabetic with chronic hepatitis C and analyze the impact of insulin resistance on laboratory and histology parameters. Subjects and methods: The study included 82 patients and blood samples were collected for glucose, lipid profile, CRP, ferritin, ALT, AST, HOMA-IR, viral load and HCV genotype. HOMA-IR greater than 2.5 were considered insulin resistance. Results: Insulin resistance was observed in 27% of patients and was associated with age, waist circumference and body mass index. When compared with patients without RI those with insulin resistance had more pronounced stage of hepatic fibrosis and necroinflammatory activity, higher levels of aminotransferases and liver steatosis more frequently. Conclusions: It is often the presence of insulin resistance in patients with chronic hepatitis C and this has resulted in the exacerbation of liver fibrosis induced by HCV.

Die vorliegende Arbeit behandelt die Oberflächenmodifikation von Nanodiamanten (ND) aus der Detonationssynthese und die anschließende Konjugation von einzel- bzw. doppelsträngiger DNA an die zuvor eingeführten funktionellen Gruppen. Als Ausgangsmaterialien wurden zwei Nanodiamantpulver mit unbekannter Oberflächenbelegung eingesetzt, deren Charakterisierung durch elektronenmikroskopische Methoden erfolgte. Weiterhin wurden kommerziell modifizierte ND mit definierter Oberflächenbelegung (Amino- und Hydroxylgruppen) verwendet. Für potenzielle Anwendungen von ND wird eine monofunktionale Oberfläche angestrebt, die u. a. über Oxidation oder Reduktion der durch den Herstellungsprozess eingeführten primären funktionellen Gruppen realisiert werden kann. Die dadurch erzeugten sekundären Funktionen ermöglichen die kovalente bzw. nichtkovalente Anbindung weiterer Substanzen, z. B. von Biomolekülen, an die Oberflächen der ND-Partikel. Die hier beschriebene Konjugation von DNA, an die mit Carboxyl-, Hydroxyl- oder Aminogruppen modifizierten Partikeloberflächen, erfolgte durch die Generierung von Amid-, Phosphodiester- und Isoharnstoffbindungen. Der Erfolg der Konjugationen wurde mit Hilfe von Infrarotspektroskopie und Fluoreszenzmikroskopie untersucht. Die Fluoreszenz der Konjugate beruhte dabei auf Fluoreszenzfarbstoffen, die an die DNA-Moleküle gebunden waren. Darüber hinaus wird die Herstellung einer kolloidalen ND-Suspension beschrieben, von der die Partikelgrößen und das Zeta-Potenzial bestimmt wurden. Kolloidale Suspensionen ermöglichen aufgrund der geringen Partikelgrößen diverse biologische und medizinische Anwendungen von ND. Mit den hier präsentierten Ergebnissen erweitert sich der Kenntnisstand zur Konjugation von DNA an ND aus der Detonationssynthese. Die angewandte Methodik kann ebenso auf andere Substanzen wie Proteine oder Chemotherapeutika übertragen werden. Derart funktionalisierte Partikel besitzen ein großes Potenzial für die weitere Anwendung in der Biomedizin und Nanotechnologie. / The present study deals with the surface modification of nanodiamonds (ND) from detonation synthesis and the subsequent conjugation of both single and double stranded DNA to previously introduced functional groups. As starting materials two kinds of nanodiamond powders with unknown surface configuration were used. Both types of ND were characterized by electron-microscopic methods. Furthermore, commercially modified ND with defined surface configuration (amino and hydroxyl groups) were applied. Potential applications of ND require a mono-functional surface, that can be realized e. g. via oxidation or reduction of the primary functional groups introduced during the production process. The thereby generated secondary functions permit the covalent or non-covalent linking of further substances onto the surfaces of ND particles. Conjugation of DNA, as described here, onto the carboxyl-, hydroxyl- or aminomodified particle surfaces was accomplished by generating of amino, phosphodiester and isourea bonds. The success of conjugations has been examined by infrared spectroscopy and fluorescence microscopy. The fluorescence of conjugates based on fluorescent dyes bound to the DNA molecules. Furthermore, the fabrication of a colloidal ND suspension is described, of which the particle sizes and the Zeta potential have been determined. Colloidal suspensions facilitate various biological and medical applications of ND on the basis of low particle sizes. The presented results enlarge the state of knowledge about the conjugation of DNA on ND from detonation synthesis. The applied methodology may also be transferred to other substances like proteins or chemotherapeutics. In this way, functionalized particles have a big potential for further application in biomedicine and nanotechnology.

L'objectif de cette thèse est l'élaboration d'un dispositif électro-émissif (DEE) à base de poly(3,4-éthylènedioxythiophène) (PEDOT), obtenu par électropolymérisation, pouvant être envisagé pour une application de régulation thermique des satellites. Pour une meilleure compréhension du comportement optique du PEDOT dans l'IR, des couches modèles ont été élaborées avant la réalisation d'un dispositif complet.La première partie de ce travail a permis de caractériser des couches modèles de PEDOT obtenues par synthèse électrochimique sur ITO dans deux sels différents : le perchlorate de lithium (LiClO4) et le bis-trifluorométhylsulfonylimide de lithium (LiTFSI) dans l'acétonitrile (ACN) comme solvant. La morphologie, la conductivité électronique et les propriétés de réflectivité dans l'IR (gamme de longueur d'onde 8-20µm) du PEDOT ont été étudiées en fonction de l'état d'oxydation du PEDOT. La réflectivité dans l'IR du PEDOT à l'état dopé diminue fortement lorsque la rugosité augmente. Ceci a été attribué à l'augmentation du coefficient d'absorption pour une surface rugueuse comme cela a déjà été reporté pour les métaux. De plus, pour une morphologie identique, il a été montré que la réflectivité des couches modèles de PEDOT évolue avec la conductivité électronique de la même manière, quel que soit le sel utilisé ou la méthode d'élaboration des films. A l'état dopé, les films ont pu être décrits par le modèle de Drude, confirmant le caractère pseudo-métallique du PEDOT. Enfin, un pourcentage de réflectivité maximal de 67% a été obtenu à l'état oxydé et de 21% à l'état réduit, ces résultats donnent une idée des performances pouvant être atteintes dans les DEE à base de PEDOT.La seconde partie de ce travail a permis l'incorporation du PEDOT par électropolymérisation au sein d'une matrice hôte à base de réseau interpénétré de polymère (RIP) combinant le caoutchouc nitrile(NBR) et le poly(oxyde d'éthylène) (POE). Le DEE obtenu est basé sur une architecture tricouches "monobloc". Ainsi, la réalisation d'un DEE à base de RIP conducteur où le PEDOT est incorporé par électropolymérisation simultanément dans les deux faces du dispositif a été validée avec succès. Une fois gonflé d'électrolyte (LiClO4 dans le carbonate de propylène), les propriétés de réflectivité dans l'IR des dispositifs ont été comparées à celles des DEE dans lesquels le PEDOT est synthétisé chimiquement. Les propriétés de réflectivité dans l'IR et de conductivité électronique ont été corrélées de la même manière que pour les couches modèles, prouvant que le comportement du PEDOT varie peu quel que soit la méthode ou le support de synthèse utilisés. / The aim of this work is the elaboration of an electro-emissive (EED) device based on electropolymerized poly(3,4-ethylenedioxythiophene) (PEDOT) for thermal control of satellites. PEDOT layers were prepared before the realization of the device in order to have a better understanding of the PEDOT optical behavior in the IR range.In the first section of this work, PEDOT model layers obtained on ITO electrodes using lithium perchlorate (LiClO4) or lithium bis-trifluoromethylsulfonylimide (LiTFSI) as supporting electrolytes and acetonitrile (ACN) as solvent were characterized. Morphology, electronic conductivity and IR reflectance properties (in the wavelength range 8-20 µm)were studied as a function of the PEDOT doping state. The IR reflectivity of doped PEDOT decreases drastically upon increasing surface roughness. This was attributed to enhanced absorption in the same way as reported for metallic surfaces. In addition, for the same morphology, the IR reflectivity is shown to follow the same trend as a function of the electronic conductivity for both salts. In the oxidized state, the layers can be described by the Drude model, confirming quasi-metallic behavior of PEDOT. Finally, the highest and lowest reflectance obtained for these PEDOT layers is 67% in the doped state ant 21% for the dedoped state respectively, which opens up interesting perspectives in terms of performances for the PEDOT-based EED.In the second part of this work, PEDOT was incorporated by electropolymerization in a host matrix based on interpenetrated polymer network (IPN) combining nitrile butadiene rubber (NBR) and poly(ethylene oxide) (PEO). The obtained EED is based on a monoblock architecture similar to a three-layer device. Thus, the elaboration of conducting IPN based EED by electropolymerization of EDOT has been made simultaneously on both faces of the device. Once the system is swollen by an electrolyte (LiClO4 in propylene carbonate), reflectivity properties of the devices were compared to those obtained by chemical oxidative polymerization of EDOT within the matrix. IR reflectivity and electronic conductivity properties were correlated following the same trend as in PEDOT layers, this means that PEDOT behavior remains the same whatever the synthesis conditions or the electrodes used for electropolymerization.

Abstract The uniformity of conductive materials is an important property in thin film electronic applications such as solar cells and light emitting diodes (LED). Such uniformity variations are often very small, invisible or below the surface of the film and thus are difficult to detect even when using high-resolution characterization devices. Thus, surface measurement instruments such as profilometer, atomic force microscope, or scanning electron microscope can all encounter remarkable challenges. The uniformity of films can also be analyzed by conductivity measurements. However, they do not provide the precise spatial uniformity information of a large area sample. To be able to investigate systematically the defects of conductive thin films an appropriate sample preparation method was constructed. In addition, a synchronized heating and IR-imaging based system (called synchronized thermography = ST) was developed to overcome the limitations of existing characterization methods. ST performance was tested and analyzed by measuring the single and multi-layer structures. In this work, Indium Tin Oxide (ITO) and poly(3,4-ethylenedioxy-thiopene):poly(styrene-sulfonate) (PEDOT: PSS) were used as examples of conductive thin films. Obtained results show that ST is capable of localizing even small defects from thin film structures based on a single IR-image. In order to make automatic identification of the defect locations and the sizes of the defects, a data processing algorithm was implemented. The performed experiments have proven ST capable of determining the conductivity of the films and the critical bending curvature of ITO. Based on thin film multi-layer PEDOT:PSS measurements, the results suggest use of the ST-method is also suitable for thickness measurements. ST with automatic data processing is a simple method to localize small defects in large-area thin film structures. This approach opens up new possibilities in measuring industrial scale manufacturing processes. / Tiivistelmä Johtavien materiaalien tasalaatuisuus on tärkeä ominaisuus ohutkalvoelektroniikan sovelluksissa kuten aurinkokennoissa ja valoa emittoivissa diodeissa (LED). Tasalaatuisuuserot ovat usein erittäin pieniä, näkymättömiä tai ne sijaitsevat pinnan alla, joten niiden havaitseminen on vaikeaa jopa korkean resoluution karakterisointivälineillä. Niinpä pintaa mittaavat laitteet kuten profilometri, atomivoimamikroskooppi ja skannaava elektronimikroskooppi kohtaavat merkittäviä haasteita. Pinnan tasalaatuisuutta voidaan analysoida myös johtavuusmittauksilla. Ne eivät kuitenkaan anna täsmällistä spatiaalista informaatiota suurista näytteistä. Johtavien ohutkalvojen rikkoutumien systemaattista tutkimista varten kehitettiin oma näytteiden käsittelymenetelmä. Lisäksi kehitettiin synkronoituun lämmitykseen ja infrapunakuvantamiseen perustuva mittaussysteemi (menetelmän nimi: synkronoitu termografia = ST), jolla pyritään ratkaisemaan nykyisten menetelmien rajoitukset. ST-menetelmää testattiin ja analysoitiin mittaamalla yksi- ja monikerroksisten kalvojen rakenteita. Indiumtinaoksidia (ITO) ja poly(3,4-etyleenidioksi-tiofeeni):poly(styreeni-sulfonaatti):a (PEDOT: PSS) käytettiin esimerkkeinä johtavista kalvoista. Tulokset osoittavat, että ST kykenee paikallistamaan pienetkin virheet ohutkalvorakenteista jopa yhden infrapunakuvan perusteella. Automaattisen tiedonkäsittelyn algoritmi implementoitiin identifioimaan virheiden paikkariippuvuuksia ja kokoja. Tehdyt kokeet osoittavat, että ST-menetelmä soveltuu kalvojen johtavuuden ja ITO:n kriittisen taivutussäteen määrittämiseen. Monikerroksisiin PEDOT:PSS rakennemittauksiin perustuen ST-menetelmä näyttäisi soveltuvan myös ohutkalvojen paksuuksien määrittämiseen. ST-menetelmä yhdistettynä automaattiseen mittaustiedon prosessointiin on yksinkertainen menetelmä paikallistamaan pieniä virheitä suuripinta-alaisilla näytteillä. Tämä lähestymistapa avaa uusia mittausmahdollisuuksia teollisuuden tuotantoprosesseihin.

Master of Science / Department of Grain Science and Industry / David L. Wetzel / During germination, biochemical changes occur in the wheat kernel by stimulation of enzymes and hormones, and the seed reserves are mobilized. Infrared microspectroscopy and imaging enables a localized chemical inventory, upon germination, to study the process. Frozen sections of germinated wheat mounted onto BaF[subscript]2 were mapped to produce functional group images for comparison with corresponding sections of ungerminated kernels. Relative functional group populations in the scutellum and embryonic axis were assessed before and after germination. An average 23% reduction in lipid to protein ratio was observed in the scutellum based on the comparison of 53,733 spectra. As a result of the early germination process, lipid in the scutellum was depleted to provide energy for the growing embryo. Germination of the kernels while in the field before harvest due to high humidity is known as preharvest sprouting. Preharvest sprouting has detrimental effects on the end use quality of the wheat (sprout damage) and cause economic loses. Tolerance to preharvest sprouting is highly desirable. To assist breeding program, a nondestructive near-IR chemical imaging method has been developed to test new lines for resistance to preharvest sprouting. The higher sensitivity of subsurface chemical imaging, compared with visual detection, alpha amylase determination, or viscosity testing, permits germination detection at early stages. A near-IR chemical imaging system with an InGaAs focal plane array (FPA) detector in the 1100 nm-1700 nm range was used. Kernels from six different cultivars, including HRW and HWW wheat, were exposed to moist conditions for 6, 12, 24, 36, and 48 hours. Images of each 90 kernel group were examined; kernels exposed to moisture for 36 hours were compared with kernels treated for 3 hours as a control. Each kernel was classified as sprouted or not sprouted with the criteria of log 1/R intensity at select wavelengths or select factors of principle component analysis (PCA) treatment of reflectance intensity data. Imaging wavelength range was expanded beyond 1700 nm to 2400 nm with the use of InSb FPA. Study for the potential for unsupervised determination in nondestructive near-IR imaging with detection wavelengths 1200-2400 is ongoing. Some preliminary results presented are encouraging.

Le vieillissement s'accompagne d'une perte progressive de la masse et de la fonction musculaire, appelée sarcopénie. Différents mécanismes ont été proposés pour expliquer la sarcopénie. Cependant, la majorité d'entre eux ont été identifiés dans le contexte d'une atrophie induite expérimentalement (par dénervation, immobilisation, jeûne...) ou via des études corrélatives chez l'homme. Ainsi nous ne connaissons pas aujourd'hui l'importance et la chronologie de ces facteurs dans le contexte du vieillissement physiologique. Caenorhabditis elegans est un organisme modèle de référence pour les études de longévité. Grâce aux outils génétiques disponibles chez le nématode C. elegans, des voies moléculaires, qui contrôlent la longévité et dont le rôle est conservé chez les mammifères, ont pu être identifiées, comme la voie du récepteur de l'insuline/IGF-1. Toutefois le vieillissement musculaire a été très peu étudié dans cet organisme.Le premier objectif de mon projet de thèse était de décrire chez C. elegans les changements subcellulaires qui sont associés la perte de mobilité avec l'âge afin d'identifier des biomarqueurs potentiels du vieillissement musculaire. Le deuxième objectif était d'utiliser ces biomarqueurs comme outil pour identifier des gènes modificateurs de la sarcopénie. Nous avons ainsi pu mettre en évidence une diminution de l'expression de gènes impliqués dans la structure et la fonction musculaire très tôt au cours de la vie adulte. Ce phénotype est suivi par une fragmentation progressive des mitochondries puis une accumulation de vésicules d'autophagie. Ces biomarqueurs ont été utilisés pour tester le rôle potentiel, dans le maintien du muscle, de facteurs impliqués dans la différenciation musculaire au cours de l'embryogenèse.L'ensemble des résultats obtenus nous permettent de proposer un modèle selon lequel le facteur de transcription unc-120, orthologue du Serum Response Factor, agirait en aval de la voie de signalisation de l'insuline/IGF-1 dans le contrôle des différents biomarqueurs du vieillissement musculaires / Aging is accompanied by a progressive loss of muscle mass and function, named sarcopenia. Different mechanisms have been proposed to explain it. Furthermore most of them have been identified in the context of an experimental induced atrophy (by denervation, immobilization, fasting...) or via correlative studies in humans. Thus today we do not know the importance and chronology of these factors in the context of physiological aging. Caenorhabditis elegans is a reference model organism for longevity studies. Thanks to genetics tools available for the nematode C. elegans, evolutionarily conserved molecular pathways, which control longevity, have been identified, such as the Insulin/IGF-1 receptor pathway. However muscle aging has been very poorly studied in this organism. The first aim of my thesis project was to describe, in C. elegans, subcellular changes that are associated with mobility loss with age in order to determine potential biomarkers of muscle aging. The second aim was to use these biomarkers as tools to identify genes able to modify sarcopenia. Specifically, we could highlight a decrease of expression of genes involved in muscle mass and function very early during adulthood. This phenotype is followed by a gradual mitochondrial fragmentation then an accumulation of autophagic vesicles.These biomarkers have been used to test the potential role in muscle maintenance, of factors involved in muscle differentiation during embryogenesis. Altogether these results suggest a model in which the transcription factor unc-120, ortholog of Serum Response Factor, would act downstream in the insulin/IGF-1 signalization pathway on the control of the different biomarkers of muscle aging

Ce travail rapporte l’étude des processus de désactivation et des modifications d’un catalyseur Ir supportésur cérine en vaporeformage de l’éthanol. Différentes causes de désactivation ont été identifiées selon lesconditions opératoires : température, temps de contact et temps de réaction. La désactivation initiale,rapide mais limitée a été attribuée à la restructuration de surface de la cérine et à la formation d’unemonocouche d’intermédiaires de type acetate, carbonate et hydroxyls. En parallèle, une désactivationlente et progressive a été mise en évidence, ayant pour origine les changements structurels de l’interfaceentre la cérine et l’iridium, liés au frittage des particules d’iridium et à la restructuration profonde de lacérine. Par contre, la formation continue, à température modérée, d’une couche de carbone encapsulantissu de la polymérisation d’intermédiaires C2 n’a pas semblé contribuer significativement à ladésactivation du catalyseur dans nos conditions opératoires. Pour limiter ce phénomène de désactivation,des modifications ont été apportées au catalyseur. Le dopage du catalyseur par PrOx a permis defortement améliorer la capacité de stockage de l’oxygène et la stabilité thermique du catalyseur,entraînant une augmentation de son activité et de sa stabilité en vaporeformage de l’éthanol. Lecatalyseur Ir/CeO2 a ensuite subi une mise en forme de la cérine (nano-tubes), avec une influencesignificative sur l'activité et la stabilité en vaporeformage de l’éthanol, liée à des effets structuraux. Unemodélisation simplifiée de ces divers phénomènes a également contribué à soutenir les propositionsoriginales de ce travail. / The objective of the thesis was to analyze the ageing processes and the modifications of an Ir/CeO2catalyst for steam reforming of ethanol. Over a model Ir/CeO2 catalyst, the initial and fast deactivationwas ascribed to ceria surface restructuring and the build-up of intermediates monolayer (acetate,carbonate and hydroxyl groups). In parallel, a progressive and slow deactivation was found to come fromthe structural changes at the ceria/Ir interface linked to Ir sintering and ceria restructuring. Theencapsulating carbon, coming from C2 intermediates polymerization, did not seem too detrimental to theactivity in the investigated operating conditions. By doping ceria with PrOx, the oxygen storage capacityand thermal stability were greatly promoted, resulting in the enhanced activity and stability. The Ir/CeO2catalyst was then modified by changing the shape of ceria. It was found that the shape and therefore thestructure of ceria influenced the activity and stability significantly. A simplified modeling of theseprocesses has contributed to support the new proposals of this work.

The thesis deals with analysis of conceptual-methodological issues examined in the framework of post-keynesian economics. The author´s goal is to supply a solution to the problem of a definition of determinism/non-determinism for both deterministic and stochastic systems and also to the problem of the prevailing confusion which surrounds the notion of reversibility/irreversibility in both path-dependent and traditional-equilibrist systems. The author regards the determinism/non-determinism problem as essentially linked to the problem of a definition of fundamental uncertainty. The key issues are being identified in the "problem of a generator of endogenous shocks" and the "selection - creation problem". Finding solutions to these enables us to take a stand on the validity/invalidity of the classical dichotomy, in the eyes of the author. Davidson´s interpretation of ergodicity and O´Donnell´s critique of this are being presented and, drawing on the latter, along with Álvarez-Ehnts´ critique, the author rejects a simplifying pattern of Davidson´s, according to which neoclassical economics is based on the ergodic axiom. The author suggests a solution to the "selection - creation problem" consisting in distinguishing epistemological determinism from ontological determinism on the one hand, and epistemological determinism from epistemological non-determinism on the other hand. While selection is a characteristic feature of epistemological determinism and, in effect, the realm of "fundamental certainty", creation is referred to by the author as a characteristic feature of epistemological non-determinism, i. e., in effect, the realm of fundamental uncertainty. The author regards the "problem of a generator of endogenous shocks" a self-contradictory notion, based on the principle of causality and the law of non-contradiction, and suggests a solution to the problem consisting in rejection of the concept of shock endogeneity. At the same time, the author rejects Davidson´s "fundamental neoclassical article of faith" rhetoric, based on the first cause argument implied by the principle of causality. In opposition to Davidson, the author regards fundamental uncertainty being of a basically epistemological nature, consisting in our ignorance of the "ultimate law of change", the "Devine formula". Unlike O´Donnell, however, who puts stress on the element of epistemological uncertainty in his epistemological approach to uncertainty, the author also puts stress on the element of ontological certainty, consisting in our knowledge of the existence of the "Devine formula", apart from our epistemological uncertainty.