Spelling suggestions: "subject:"[een] HEAT EXCHANGERS"" "subject:"[enn] HEAT EXCHANGERS""
1 |
Pressure drop consideration in process integrationShahi, Mohammad Hassan Panjeh January 1992 (has links)
No description available.
|
2 |
The development of microstructure and its influence on stress rupture failure in iron based ODS alloys made by mechanical alloyingJaeger, D. M. January 1994 (has links)
No description available.
|
3 |
Detailed velocity measurements of flow through staggered and in-line tube banks in cross-flow using laser doppler anemometryHalim, Mohammed Salim January 1988 (has links)
No description available.
|
4 |
Grey-box modelling of physical systemsFargus, Richard January 1996 (has links)
No description available.
|
5 |
Numerical and experimental study of the performance of a drop-shaped pin fin heat exchangerBoulares, Jihed 06 1900 (has links)
Approved for public release; distribution is unlimited. / This research presents the results of a combined numerical and experimental study of heat transfer and pressure drop behavior in a compact heat exchanger (CHE) designed with drop-shaped pin fins. A numerical study using ANSYS was first conducted to select the optimum pin shape and configuration for the CHE. This was followed by an experimental study to validate the numerical model. The results indicate that the drop shaped pin fins yield a considerable improvement in heat transfer compared to circular pin fins for the same pressure drop characteristics. This improvement is mainly due to the increased wetted surface area of the drop pins, and the delay in the flow separation as it passes the more streamlined drop shaped pin fins. The data and conclusions of this study can be used in heat exchanger design for large heat flux cooling applications as in gas turbine blades, and high-power electronics. / Lieutenant Junior Grade, Tunisian Navy
|
6 |
Particulate fouling in an industrial cooling systemLister, Vincent Yves January 2015 (has links)
No description available.
|
7 |
Heat exchanger design to preheat ventilation air for swine housing /Topp, Gregory Charles. January 1983 (has links)
Thesis (M.S.)--Ohio State University, 1983. / Includes bibliographical references (leaves 84-85). Available online via OhioLINK's ETD Center
|
8 |
Dynamic characteristics and microcomputer control of a triple heat exchanger /Fung, Hoi-kwun, Eric. January 1981 (has links)
Thesis--Ph. D., University of Hong Kong, 1982.
|
9 |
Numerical and experimental study of the performance of a drop-shaped pin fin heat exchanger /Boulares, Jihed. January 2003 (has links) (PDF)
Thesis (Mechanical Engineer and M.S. in Mechanical Engineering)--Naval Postgraduate School, June 2003. / Thesis advisor(s): Ashok Gopinath. Includes bibliographical references (p. 73-74). Also available online.
|
10 |
The influence of frosting on the optimum design of finned-tube evaporatorsAl-Sahaf, Jamal A. January 1989 (has links)
No description available.
|
Page generated in 0.5506 seconds