Doctoral Dissertation, Ph.D., University of California, Berkeley, Berkeley, California, USA. / Published through the Information Bridge: DOE Scientific and Technical Information. "LBNL--56749" Folden III, Charles Marvin. USDOE Director. Office of Science. Office of Nuclear Physics 11/04/2004. Report is also available in paper and microfiche from NTIS.

Submitted by Marco Antonio Oliveira da Silva (maosilva@ipen.br) on 2017-05-25T11:35:08Z No. of bitstreams: 0 / Made available in DSpace on 2017-05-25T11:35:08Z (GMT). No. of bitstreams: 0 / A tecnologia de nanocompósitos é aplicável a uma vasta gama de polímeros termoplásticos e termofixos. A utilização de subprodutos da cana de açúcar tem sido extensivamente estudada como fonte de reforços para os nanocompósitos. O bagaço da cana é largamente utilizado na cogeração de energia e, como resultado da queima deste material, são produzidas milhões de toneladas de cinzas. Para este trabalho, sílica contida nas cinzas do bagaço da cana de açúcar foi extraída por método químico e método térmico. O método térmico se mostrou mais eficiente levando a uma pureza de mais de 93 % em sílica, enquanto o método químico gerou sílica bastante contaminada com cloro e sódio provenientes dos reagentes da extração. As partículas de sílica obtidas foram avaliadas por espalhamento de luz dinâmico (DSL) e apresentaram tamanho médio de 12 μm. Estas partículas foram submetidas à moagem em moinho de bolas e na sequência a tratamento sonoquímico em meio líquido. As partículas de sílica tratadas no processo sonoquímico a 20 kHz, potência de 500 W e 90 minutos tiveram suas dimensões reduzidas a escala nanométrica da ordem de dezenas de nanômetros. A nanossílica obtida foi então incorporada como reforço em polietileno de alta densidade (HDPE). Ensaios mecânicos e termo-mecânicos mostram ganhos de propriedades mecânicas, com exceção da propriedade de resistência ao impacto. O ensaio de deflexão térmica (HDT) mostrou que a incorporação deste reforço no HDPE levou a um pequeno aumento nesta propriedade relação ao HDPE puro. A cristalinidade dos nanocompósitos gerados foi avaliada por meio de calorimetria exploratória diferencial (DSC) e observou-se um decréscimo de cristalinidade do material quando a incorporação de reforço foi de 3%. O material irradiado a 250 kGy com feixe de elétrons mostra ganhos acentuados na principais propriedades do mesmo, principalmente devido ao alto nível de reticulação do HDPE irradiado. / Tese (Doutorado em Tecnologia Nuclear) / IPEN/T / Instituto de Pesquisas Energéticas e Nucleares - IPEN-CNEN/SP

Submitted by Marco Antonio Oliveira da Silva (maosilva@ipen.br) on 2017-11-01T17:11:09Z No. of bitstreams: 0 / Made available in DSpace on 2017-11-01T17:11:09Z (GMT). No. of bitstreams: 0 / Este trabalho tem por objetivo estudar as propriedades mecânicas e a caracterização microestrutural de espécimes da liga de Co-Cr-Mo obtidos por manufatura aditiva fusão seletiva a laser (do inglês Selective Laser Melting SLM) e por fundição de precisão, visando a confecção de próteses odontológicas. A partir de pós de Co-Cr-Mo atomizados a gás foram realizadas as seguintes etapas: 1) investigação das propriedades físicas, químicas e térmicas dos pós atomizados em diferentes faixas granulométricas (denominadas: D1 < 15 &mu;m, D2 de 20-50 &mu;m e D3 > 75 &mu;m); 2) confecção de espécimes, em dimensões padronizadas, por meio das técnicas de consolidação; 3) caracterização dos consolidados por análise de: citotoxicidade, porosidade, difração de raios X e dilatometria; 4) caracterização mecânica de tração, flexão em três pontos, dureza (macro e micro Vickers) e caracterização microestrutural (microscopia óptica e eletrônica de varredura). De modo geral, os resultados obtidos foram: a granulometria D2 (20-50 &mu;m) é a que melhor se enquadra nas análises de empacotamento para a consolidação por meio de SLM; a biocompatibilidade das amostras obteve resultado positivo para ambas técnicas de processamento; a avaliação mecânica dos espécimes evidencia que a técnica de fusão seletiva a laser propicia propriedades mecânicas (tensão de escoamento, tensão de ruptura, tensão máxima, alongamento e dureza) superiores as obtidas pela técnica de fundição de precisão; a microestrutura obtida pelo processo SLM é composta por grãos ultrafinos e de elevada homogeneidade química. Conclui-se que, o desenvolvimento do presente estudo evidenciou que na fabricação de componentes odontológicos customizados (coroas) a técnica SLM apresenta qualidade superior quando comparada a fundição de precisão. / Dissertação (Mestrado em Tecnologia Nuclear) / IPEN/D / Instituto de Pesquisas Energéticas e Nucleares - IPEN-CNEN/SP

The Biscayne Aquifer is a primary source of water supply in Southeast Florida. As a coastal aquifer, it is threatened by saltwater intrusion (SWI) when the natural groundwater flow is altered by over-pumping of groundwater. SWI is detrimental to the quality of fresh groundwater sources, making the water unfit for drinking due to mixing and reactions with aquifer minerals. Increasing water demand and complex environmental issues thus force water utilities in South Florida to sustainably manage saltwater intrusion and develop alternative water supplies (e.g., aquifer storage and recovery, ASR). The objectives of this study were to develop and use calibrated geochemical models to estimate water quality changes during saline intrusion and during ASR in south Florida. A batch-reaction model of saltwater intrusion was developed and important geochemical reactions were inferred. Additionally, a reactive transport model was developed to assess fate and transport of major ions and trace metals (Fe, As) at the Kissimmee River ASR. Finally, a cost-effective management of saltwater intrusion that involves using abstraction and recharge wells was implemented and optimized for the case of the Biscayne Aquifer. Major processes in the SWI areas were found to be mixing and dissolution-precipitation reactions with calcite and dolomite. Most of the major ions (Cl, Na, K, Mg, SO4) behaved conservatively during ASR while Ca and alkalinity were affected by carbonate reactions and cation exchange. A complex set of reactions involving thermodynamic equilibrium, kinetics and surface complexation reactions was required in the ASR model to simulate observed concentrations of Fe and As. The saltwater management model aimed at finding optimal locations and flow rates for abstraction and recharge wells. Optimal solutions (i.e., minimum total salt and total cost Pareto front) were produced for the Biscayne Aquifer for scenarios of surface recharge induced by climate change-affected precipitation. In general, abstraction at the maximum rate near the coast and artificial recharge at locations much further inland were found to be optimal. Knowledge developed herein directly supports the understanding of SWI caused by anthropogenic stressors, such as over-pumping and sea level rise, on coastal aquifers.

For any drug candidate to be approved by the U.S. Food and Drug Administration, it must meet strict standards for safety and efficacy. While the field of nuclear medicine is over 100 years old, traditional methods such as external beams or systematic administration have rarely met these standards or have limited application. Ligand-targeted therapy and diagnostics, or “theranostics,” has emerged in the past several decades as an exciting field that offers new possibilities to design drugs that are both safe and effective. When applied to nuclear medicine, the field of ligand-targeted radioactive theranostics is younger still, with many critical lessons being discovered and applied currently. This dissertation outlines the necessary principles of radioactive theranostic drug design, then demonstrates the application of several more recent techniques to improve both the efficacy and safety of radioactive theranostics targeting two high priority oncological targets: fibroblast activation protein alpha and folate receptor.

Ce mémoire présente mes travaux ayant menés au développement d’une première génération de radioligands marqués au fluor-18 (t1/2 = 110 min) et au carbone-11 (t1/2 = 20.4 min) destinés à l’imagerie cérébrale in vivo du récepteur tyrosine kinase neurotrophique de type 2 (TrkB) en tomographie par émission de positons (TEP). Ces travaux reposent sur l’identification récente de ligands de TrkB non peptidiques à hautes affinités dérivés du 7,8-dihydroxyflavone. La synthèse d’une série de dérivés du 7,8-dihydroxyflavone non-radioactifs de même que des précuseurs à l’incorporation du fluro-18 et du carbone-11 a d’abord été effectuée. Partant des précurseurs adéquats synthétisés, la radiosynthèse de deux radioligands, l’un marqué au fluor-18 et l’autre au carbone-11, a été développée. Ces radiosynthèses reposent respectivement sur une 18F-radiofluorination nucléophile aromatique nouvelle et hautement efficace et sur une 11C-méthylation N-sélective. Les radiotraceurs de TrkB ainsi obtenus ont ensuite été évalués in vitro en autoradiographie et in vivo en tant que traceurs TEP dans des rats. L’évaluation des propriétés physico-chimique de même que de la stabilité in vitro des radiotraceurs sont présentées. Partant d’une série d’analogues cristallisés de ces flavones synthétiques, une étude de relation structure-activité a été menée. La combinaison de cette étude, de pair avec l’évaluation in vivo de la première génération de radiotraceurs de TrkB a aussi permis d’investiguer les pharmacophores nécessaires à l’affinité de ces ligands de même que d’identifier des fragments structurels associés au métabolisme des radiotraceurs. La radiosynthèse d’un troisième radioligand de TrkB et son évaluation TEP in vivo de même que la mise en lumière des modifications structurelles utiles au développement d’une seconde génération de radioligands de TrkB avec des propriétés optimisées pour fin d’imagerie TEP sont aussi détaillés. / This thesis describes my contribution leading to the development of the first-generation positron emission tomography (PET) radioligands labeled with fluorine-18 (t1/2 = 110 min) or carbon-11 (t1/2 = 20.4 min) for the in vivo brain imaging of tropomyosin-related kinase B (TrkB). This research follows from the recent discovery of non-peptidic, high-affinity TrkB ligands derived from 7,8-dihydroxyflavone. The synthesis of non-radioactive 7,8-dihydroxyflavone derivatives and radiolabeling precursors amenable to fluorine-18 and carbon-11 incorporation was performed. Two synthesized compounds have been brought forward as precursors for radiolabeling with either fluorine-18 or carbon-11. Radiosynthesis involved either a novel nucleophilic aromatic subsitution with [18F]fluoride, or N-methylation with [11C]methyl iodide or [11C] methyl triflate. The resulting radiotracers were assessed in vitro by autoradiography and in vivo by PET scans of rats. The physicochemical properties and serum stability of these tracers were also evaluated. X-ray crystal structures of a series of synthetic flavone analogues were used as basis for structure-activity relationship (SAR) analysis. In combination with the above in vivo PET evaluation of these compounds, certain pharmacophores were shown essential for ligand binding affinity. In addition, some structural fragments were associated with in vivo ligand metabolism. The development and radiosynthesis of a third TrkB radiotracer, along with its in vivo PET evaluation and structural analysis, is also described here. In all, better understanding of these tracers have led to the design of potential second-generation TrkB ligands with more optimal properties as PET radiotracers.

Ce mémoire présente mes travaux ayant menés au développement d’une première génération de radioligands marqués au fluor-18 (t1/2 = 110 min) et au carbone-11 (t1/2 = 20.4 min) destinés à l’imagerie cérébrale in vivo du récepteur tyrosine kinase neurotrophique de type 2 (TrkB) en tomographie par émission de positons (TEP). Ces travaux reposent sur l’identification récente de ligands de TrkB non peptidiques à hautes affinités dérivés du 7,8-dihydroxyflavone. La synthèse d’une série de dérivés du 7,8-dihydroxyflavone non-radioactifs de même que des précuseurs à l’incorporation du fluro-18 et du carbone-11 a d’abord été effectuée. Partant des précurseurs adéquats synthétisés, la radiosynthèse de deux radioligands, l’un marqué au fluor-18 et l’autre au carbone-11, a été développée. Ces radiosynthèses reposent respectivement sur une 18F-radiofluorination nucléophile aromatique nouvelle et hautement efficace et sur une 11C-méthylation N-sélective. Les radiotraceurs de TrkB ainsi obtenus ont ensuite été évalués in vitro en autoradiographie et in vivo en tant que traceurs TEP dans des rats. L’évaluation des propriétés physico-chimique de même que de la stabilité in vitro des radiotraceurs sont présentées. Partant d’une série d’analogues cristallisés de ces flavones synthétiques, une étude de relation structure-activité a été menée. La combinaison de cette étude, de pair avec l’évaluation in vivo de la première génération de radiotraceurs de TrkB a aussi permis d’investiguer les pharmacophores nécessaires à l’affinité de ces ligands de même que d’identifier des fragments structurels associés au métabolisme des radiotraceurs. La radiosynthèse d’un troisième radioligand de TrkB et son évaluation TEP in vivo de même que la mise en lumière des modifications structurelles utiles au développement d’une seconde génération de radioligands de TrkB avec des propriétés optimisées pour fin d’imagerie TEP sont aussi détaillés. / This thesis describes my contribution leading to the development of the first-generation positron emission tomography (PET) radioligands labeled with fluorine-18 (t1/2 = 110 min) or carbon-11 (t1/2 = 20.4 min) for the in vivo brain imaging of tropomyosin-related kinase B (TrkB). This research follows from the recent discovery of non-peptidic, high-affinity TrkB ligands derived from 7,8-dihydroxyflavone. The synthesis of non-radioactive 7,8-dihydroxyflavone derivatives and radiolabeling precursors amenable to fluorine-18 and carbon-11 incorporation was performed. Two synthesized compounds have been brought forward as precursors for radiolabeling with either fluorine-18 or carbon-11. Radiosynthesis involved either a novel nucleophilic aromatic subsitution with [18F]fluoride, or N-methylation with [11C]methyl iodide or [11C] methyl triflate. The resulting radiotracers were assessed in vitro by autoradiography and in vivo by PET scans of rats. The physicochemical properties and serum stability of these tracers were also evaluated. X-ray crystal structures of a series of synthetic flavone analogues were used as basis for structure-activity relationship (SAR) analysis. In combination with the above in vivo PET evaluation of these compounds, certain pharmacophores were shown essential for ligand binding affinity. In addition, some structural fragments were associated with in vivo ligand metabolism. The development and radiosynthesis of a third TrkB radiotracer, along with its in vivo PET evaluation and structural analysis, is also described here. In all, better understanding of these tracers have led to the design of potential second-generation TrkB ligands with more optimal properties as PET radiotracers.

S'ha desenvolupat una nova estratègia per la síntesi ràpida i eficient de L-[metil-11C]metionina basada en el captive solvent method. La reacció de L-homocisteína (dissolució bàsica en aigua/etanol 1:1) amb [11C]CH3I en un loop de HPLC va permetre la formació del radiotraçador desitjat amb elevat rendiment radioquímic (38.4 ± 4.1%) en un temps curt (< 12 min). Tots el paràmetres analítics compleixen les especificacions requerides per la versió actual de la Farmacopea Espanyola, tot i que els valors d'activitat específica obtinguts van ser relativament baixos. Degut a això, es van estudiar i quantificar les principals fonts que contribueixen a la contaminació de carboni-12 durant les síntesis de [11C]CH3I efectuades segons el "wet" method. Es va observar que la principal font de contaminació de CO2 no radioactiu (contribució>90%) és el propi procés de bombardeig, probablement degut a la combustió (causada per les altes temperatures i pressions assolides durant la irradiació) dels compostos que contenen carboni i que es troben al gas irradiat (o a l'interior del blanc). Es van establir procediments generals per realitzar abans, durant i després de la radiosíntesi per prevenir la contaminació exterior i, d'aquesta manera, augmentar l'activitat específica dels radiotraçadors sintetitzats.En quant al marcatge amb nitrogen-13, s'ha desenvolupat un procés totalment automàtic per a la producció de [13N]NO2- a partir de [13N]NO3- generat en el ciclotró. El precursor radioactiu [13N]NO2- s'ha utilitzat per la radiosíntesi de compostos amb interès biològic com ara S-nitrosotiols (donadors de NO.), N-nitrosamines (molècules amb potencials efectes carcinogènics) i azo compostos (amb possible aplicació com a radiotraçadors per a la detecció in vivo de plaques de &#946;-amiloide). En tots els casos es van obtenir excel·lents conversions radioquímiques (48.7% - 74.5% per S-[13N]nitrosotiols, 45.6% - 53.4% per N-[13N]nitrosamines i 40.0% - 58.3% per 13N-azo compostos) i bons rendiments radioquímics (33.8% - 60.6% per S-[13N]nitrosotiols, 34.0% - 37.8% per N-[13N]nitrosamines i 20.4% - 47.2% per 13N-azo compostos). A més a més, s'ha dissenyat i implementat un mòdul automàtic amb control remot pel marcatge de molècules amb 13N. / Se ha desarrollado una nueva estrategia para la síntesis rápida y eficiente de L-[metil-11C]metionina basada en el captive solvent method. La reacción de L-homocisteína (disolución básica en agua/etanol 1:1) con [11C]CH3I en un loop de HPLC permitió la formación del radiotrazador deseado con elevado rendimiento radioquímico (38.4 ± 4.1%) en un tiempo corto (< 12 min). Todos los parámetros analíticos cumplían las especificaciones requeridas por la versión actual de la Farmacopea Española, aunque los valores de actividad específica obtenidos fueron relativamente bajos. Por ello, se estudiaron y cuantificaron las principales fuentes que contribuyen a la contaminación de carbono-12 durante las síntesis de [11C]CH3I efectuadas según el "wet" method. Se observó que la principal fuente de contaminación de CO2 no radiactivo (contribución>90%) es el propio proceso de bombardeo, probablemente debido a la combustión (causada por las altas temperaturas y presiones alcanzadas durante la irradiación) de los compuestos que contienen carbono y que se encuentran presentes en el gas irradiado (o en el mismo cuerpo del blanco). Se establecieron procedimientos generales para realizar antes, durante y con posterioridad a la radiosíntesis para prevenir la contaminación exterior y, de esta manera, aumentar la actividad específica de los radiotrazadores sintetizados.Respecto al marcaje con nitrógeno-13, se ha desarrollado un proceso totalmente automático para la producción de [13N]NO2- a partir del [13N]NO3- generado en el ciclotrón. El precursor radiactivo [13N]NO2- se ha utilizado para la radiosíntesis de compuestos con interés biológico tales como S-nitrosotioles (donadores de NO.), N-nitrosaminas (moléculas con potenciales efectos carcinogénicos) y azo compuestos (con posible aplicación como radiotrazadores para la detección in vivo de placas de &#946;-amiloide). En todos los casos se obtuvieron excelentes conversiones radioquímicas (48.7% - 74.5% para S-[13N]nitrosotioles, 45.6% - 53.4% para N-[13N]nitrosaminas y 40.0% - 58.3% para 13N-azo compuestos) y buenos rendimientos radioquímicos (33.8% - 60.6% para S-[13N]nitrosotioles, 34.0% - 37.8% para N-[13N]nitrosaminas y 20.4% - 47.2% para 13N-azo compuestos). Además, se ha diseñado e implementado un módulo automático con control remoto para el marcaje de moléculas con 13N. / A new strategy for the fast and efficient synthesis of L-[methyl-11C]methionine based on the captive solvent method has been developed. The in loop reaction of a basic water/ethanol 1:1 solution of L-homocysteine with [11C]CH3I led to the formation of the desired radiotracer with high radiochemical yield (38.4 ± 4.1%) in short production time (< 12 min). All analytical parameters were within the specifications of the current version of the Spanish Pharmacopoeia, although specific radioactivity values were relatively low. Thus, the main sources of carbon-12 during the synthesis of [11C]CH3I by the "wet" method were studied and the contribution attributable to each individual source was quantified. The most relevant contamination of non-radioactive CO2 (contribution>90%) was shown to be generated during the bombardment process, probably due to the combustion (caused by high temperature and pressure during irradiation) of carbon carrier compounds present in the irradiated gas (or target body). General procedures to be performed before, during and after the radiosynthesis were established to prevent external contamination and to improve the specific radioactivity of 11C-labeled radiotracers synthesized from [11C]CH3I produced via the "wet" method. Concerning 13N-labeling, a fully automatic process for the production of [13N]NO2- from cyclotron generated [13N]NO3- has been developed. The radioactive precursor [13N]NO2- has been used for the synthesis of biologically interesting 13N-labeled compounds such as S-nitrosothiols (well-known NO. donors), N-nitrosamines (molecules with potent carcinogenic effects) and azo compounds (with putative application as imaging probes for in vivo detection of &#946;-amyloid plaques). In all cases, excellent radiochemical conversion (48.7% - 74.5% for S-[13N]nitrosothiols, 45.6% - 53.4% for N-[13N]nitrosamines and 40.0% - 58.3% for 13N-labeled azo compounds) and good radiochemical yields (33.8% - 60.6% for S-[13N]nitrosothiols, 34.0% - 37.8% for N-[13N]nitrosamines and 20.4% - 47.2% for 13N-labeled azo compounds) were achieved. An automatic remote controlled synthesis module for the preparation of 13N-labeled structures has been designed and implemented.

Thesis (Ph.D.); Submitted to the UNIVERSITY OF CALIFORNIA, BERKELEY, CA (US); 9 Dec 2004. / Published through the Information Bridge: DOE Scientific and Technical Information. "LBNL--56744" Guo, Fanqing. USDOE Director. Office of Science. Office of Nuclear Physics (US) 12/09/2004. Report is also available in paper and microfiche from NTIS.

<div>Delayed fracture healing is a major health issue involved with aging. Therefore, strategies to improve the pace of repair and prevent non-union are needed in order to improve patient outcomes and lower healthcare costs. In order to accelerate bone fracture healing noninvasively, we sought to develop a drug delivery system that could safely and effectively be used to deliver therapeutics to the site of a bone fracture. We elected to pursue the promising strategy of using small-molecule drug conjugates that deliver therapeutics to bone in an attempt to increase the efficacy and safety of drugs for treating bone-related diseases.</div><div>This strategy also opened the door for new methods of administering drugs. Traditionally, administering bone anabolic agents to treat bone fractures has relied entirely on local surgical application. However, because it is so invasive, this method’s use and development has been limited. By conjugating bone anabolic agents to bone-homing molecules, bone fracture treatment can be performed through minimally invasive subcutaneous administration. The exposure of raw hydroxyapatite that occurs with a bone fracture allows these high-affinity molecules to chelate the calcium component of hydroxyapatite and localize primarily to the fracture site.</div><div>Many bone-homing molecules (such as bisphosphonates and tetracycline targeting) have been developed to treat osteoporosis. However, many of these molecules have toxicity associated with them. We have found that short oligopeptides of acidic amino acids can localize to bone fractures with high selectivity and with very low toxicity compared to bisphosphonates and tetracyclines.</div><div>We have also demonstrated that these molecules can be used to target peptides of all chemical classes: hydrophobic, neutral, cationic, anionic, short, and long. This ability is particularly useful because many bone anabolics are peptidic in nature. We have found that acidic oligopeptides have better persistence at the site of the fracture than bisphosphonate-targeted therapeutics. This method allows for a systemic administration of bone anabolics to treat bone fractures, which it achieves by accumulating the bone anabolic at the fracture site. It also opens the door for a new way of treating the prevalent afflictions of broken bones and the deaths associated with them.</div><div>We further developed this technology by using it to deliver anabolic peptides derived from growth factors, angiogenic agents, neuropeptides, and extracellular matrix fragments. We found several promising therapeutics that accelerated the healing of bone fractures by improving the mineralization of the callus and improving the overall strength. We optimized the performance of these molecules by improving their stability, targeting ligands, linkers, dose, and dosing frequency.</div><div>We also found that these therapeutics could be used to accelerate bone fracture repair even in the presence of severe comorbidities (such as diabetes and osteoporosis) that typically slow the repair process. We found that, unlike the currently approved therapeutic for fracture healing (BMP2), our therapeutics improved functionality and reduced pain in addition to strengthening the bone. These optimized targeted bone anabolics were not only effective at healing bone fractures but they also demonstrated that they could be used to speed up spinal fusion. Additionally, we demonstrated that acidic oligopeptides have potential to be used to treat other bone diseases with damaged bone.</div><div>With these targeted therapeutics, we no longer have to limit bone fracture healing to casts or invasive surgeries. Rather, we can apply these promising therapeutics that can be administered non-invasively to augment existing orthopedic practices. As these therapeutics move into clinical development, we anticipate that they will be able to reduce the immobilization time that is the source of so many of the deadly complications associated with bone fracture healing, particularly in the elderly.</div>