To my master's thesis I approached with the idea of functional simplicity in construction and without limitation of comfort of the object´s users. Residential house is located in a new development in Pávov near Jihlava, which is designed as a five-storey building that provides housing for people moving for work. This is why I designed it as a low cost construction, which mainly consists of one room apartments with a kitchen corner. The whole building is shaped as "L", where the ground floor serves as technical facility of the object, entrance, cellar and a covered parking space.The following four floors serve as residential. From the construction point of view I chose a suitable combination of materials and systems for overall pleasant use of the building.

The master´s thesis deals with a design of modernization of Čadca railway station. Content of the thesis is the design of reconstruction of station heads, increasing the speed in the main tracks to 140 km/h, removal of level crossings for passengers at platforms access and the width adjustment arrangement of the platforms for the safe movement of people with reduced mobility.

The master‘s thesis focuses on the optimization of the design values of curves of the horizontal alignments of the roads. It deals with the comparison of values between czech and foreign standards and differences between them. The practical part examines the values of the real speeds of vehicles passing through the curves of various parameters that were measured during measurements of selected curves during 2014. From these data a new design values are derived that could be used for the design of horizontal alignments.

The subject of this project documentation for building is new building of Ballroom dance club in Frenštát pod Radhoštěm conected with current building of cinema. Object is situated in Frenštát pod Radhoštěm in region of Nový Jičín. The target of this diploma thesis was design of public building for cultural enjoying with using current spaces in the locality to fulfill requirements of investor. The thesis is devided into parts of preparing, situating, documentation to be involved into the surrounding.

The object of this dissertation is to analyse a drilling process of an automatic horizontal boring machine the SVD2 for drilling of bearing holes. There were problems with vibrations during drilling process, causing an extreme noise and this dissertation solves them. First of all it was necessary to analyse the vibrations, to examine a machining process and measure machine dynamics and statics. Another task was to compare measured results with mathematical models and after their analysis to design structural and other solutions. The SVD2 machine was designed on the basis of a previous type the SVD. Its conversion to a new one was based on adding of six spindles. As a result a number of drilled bodies was increased from one to four, so a performance was increased four times. That is why there was an original intention to rebuilt the other two spindle machines. To leave the basical parts of the machine without any modification ( such as a reinforcement of a mount and adjusting of a bigger distance of a side linear spindle guideway and a cross linear guideway of a support for clamping devices), would be unsuitable solution, which was confirmed after a measurement and a following analysis.

Diploma thesis is intended on analysis of multi-machine operation and zoning of the time of attendance. The aim of the work was a device of methodical solution and creation of the program in Excel. Thesis is specialized in creation of the program in two possible solutions.

The topic of the thesis is counting the capacity calculations for two and three-shift operation of the four components of jet engines, deisgn layouts of each workstation of line, compare the cost of the two and three-shift operation and recommendation of appropriate option.

Presented document deals with optimization in conveyer rollers production in accordance with rationalizing project for Transroll – CZ, s.r.o. company. With consideration of available literature from section of technological projection and technology of machining, the industrial process is analyzed with focus on material flow and layout solution of factory shop. Consecutively the options of possible machines allocation are designed, which eliminate some disadvantages of default position. Selection of suitable option, its evaluation and technical-economic evaluation of whole project are also parts in this document.

Tato práce zkoumá možností řešení kritické síly vzpěrné stability laminátových kompozitních válcových skořepin jak analytickým tak MKP přístupem. Analytické řešení je prezentováno detailně a je zpracován Matlab program pro jeho výpočet. MKP řešení je prováděno ve dvou řešičích softwaru MSC.Nastran, jsou zjišťována vhodná nastavení těchto řešičů a jejich chování. Všechny způsoby řešení jsou na závěr porovnány a je navrženo několik závěrů.

This diploma thesis is focused on construction of one-cylinder four stroke engine designed for motocross competition. The target was create the 3D model, which has foundation on the thermodynamic simulation. Kinematics of timing mechanism was designed in Lotus Simulation. For checking the main bearings life calculation was performed.