With reduced prevalence of visceral leishmaniasis (VL) in the Indian subcontinent (ISC), direct and field deployable diagnostic tests are needed to implement an effective diagnostic and surveillance algorithm for post-elimination VL control. In this regard, here we investigated the diagnostic efficacies of a loop-mediated isothermal amplification (LAMP) assay (Loopamp™ Leishmania Detection Kit, Eiken Chemical CO., Ltd, Japan), a real-time quantitative PCR assay (qPCR) and the Leishmania antigen ELISA (CLIN-TECH, UK) with different sampling techniques and evaluated their prospect to incorporate into post-elimination VL control strategies. Eighty clinically and rK39 rapid diagnostic test confirmed VL cases and 80 endemic healthy controls were enrolled in the study. Peripheral blood and dried blood spots (DBS) were collected from all the participants at the time of diagnosis. DNA was extracted from whole blood (WB) and DBS via silica columns (QIAGEN) and boil & spin (B&S) methods and tested with qPCR and Loopamp. Urine was collected from all participants at the time of diagnosis and was directly subjected to the Leishmania antigen ELISA. 41 patients were followed up and urine samples were collected at day 30 and day 180 after treatment and ELISA was performed. The sensitivities of the Loopamp-WB(B&S) and Loopamp-WB(QIA) were 96.2% (95% CI 89·43-99·22) and 95% (95% CI 87·69-98·62) respectively. The sensitivity of Loopamp- DBS(QIA) was 85% (95% CI 75·26- 92·00). The sensitivities of the qPCR-WB(QIA) and qPCR-DBS(QIA) were 93.8% (95% CI 86·01-97·94) and 72.5% (95% CI 61·38-81·90) respectively. The specificity of all molecular assays was 100%. The sensitivity and specificity of the Leishmania antigen ELISA were 97.5% (95% CI 91·47-99·70) and 91.95% (95% CI 84·12-96·70) respectively. The Leishmania antigen ELISA depicted clinical cure at day 180 in all the followed-up cases. Efficacy and sustainability identify the Loopamp-WB(B&S) and the Leishmania antigen ELISA as promising and minimally invasive VL diagnostic tools to support VL diagnostic and surveillance activities respectively in the post-elimination era.

No description available.

Clostridium perfringens is the most common cause of gas gangrene (clostridial myonecrosis), a disease that begins when ischemic tissues become contaminated with C. perfringens. C. perfringens quickly multiplies in ischemic tissues and spreads to healthy areas, leading to high levels of morbidity and mortality. As a species, the bacterium can synthesize thirteen different toxins. The alpha toxin (PLC) and perfringolysin O (PFO) are thought to be important virulence factors in gangrene. We wished to understand how C. perfringens is capable of avoiding killing by the host immune system, and determine if PLC and PFO play a role in this avoidance. We found C. perfringens was not killed by J774-33 cells or mouse peritoneal macrophages under aerobic or anaerobic conditions. Using electron microscopy, we showed that C. perfringens could escape the phagosome of J774-33 and mouse peritoneal macrophages. We believe the ability of C. perfringens to survive in the presence of macrophages is due to its ability to escape the phagosome. Using a variety of inhibitors of specific receptors, we identified those used by J774-33 cells to phagocytose C. perfringens. The scavenger receptor, mannose receptor(s), and complement receptor (CR3) were involved in the phagocytosis of C. perfringens. To determine if PFO or PLC were involved in the ability of C. perfringens to survive in the presence of macrophages, we constructed C. perfringens strains lacking these toxins. The ability of C. perfringens to survive in the presence of J774-33 cells is dependent on PFO, while survival in mouse peritoneal macrophages is dependent on PFO and PLC. The ability of C. perfringens to escape the phagosome of J774-33 cells and mouse peritoneal macrophages is mediated by either PFO or PLC. Using a mouse model, we found that PFO and PLC were necessary for C. perfringens to survive in vivo using infectious doses 1000 times lower than those required to initiate a gangrene infection. We propose that PFO and PLC play a critical role in the survival of C. perfringens during the early stages of gangrene infections, when phagocytic cells are present and bacterial numbers are low. / Ph. D.

[ES] El virus meridional del tomate (Southern tomato virus, STV) es un virus persistente (género Amalgavirus, familia Amalgaviridae) que se ha detectado en diversos países como España e Italia. Inicialmente, fue asociado a síntomas de decoloración y falta de maduración en el fruto de tomate. Sin embargo, la presencia frecuente de virus agudos en las plantas infectadas con el STV y la detección de éste en plantas asintomáticas, ponen en duda su patogenicidad y el impacto que puede tener en el cultivo. En esta tesis doctoral se puso a punto la RT-LAMP y la RT-qPCR para la detección específica y sensible del STV. La RT-LAMP permitió reducir costes y simplificar el procedimiento, siendo útil para la detección en campo. La RT-qPCR nos permitió detectar y cuantificar el STV en distintos tipos de tejidos de tomate, incluyendo semillas individuales. El virus se acumulaba principalmente en las raíces y hojas, y en las semillas se encontraba tanto en cubierta como en embrión, lo que dificulta las tareas de desinfección. La tasa de transmisión por semilla del virus, la incidencia en campo y en viveros era muy elevada, afectando más a variedades comerciales que locales. Los análisis filogenéticos mostraron que el STV tenía una baja diversidad genética con una fuerte presión de selección negativa. Además, no había una correlación entre distancia genética del virus y origen geográfico debido a una rápida dispersión de semillas infectadas y/o una fuerte presión de selección negativa. Se comprobó que el STV en condiciones de infección simple no inducía síntomas, no alteraba la producción, ni afectaba a parámetros fisiológicos como conductividad estomática, fotosíntesis y peso, en condiciones de estrés salino. Tampoco se observaron cambios a nivel tisular ni celular, ni se encontraron partículas virales. Sin embargo, el virus modificaba la expresión de algunos miRNAs con importantes funciones. Se detectaron muy poca cantidad de vsiRNAs derivados del STV, lo cual podría deberse a la supresión del silenciamiento génico de la planta por acción de un supresor codificado por el virus. Los ensayos de expresión transitoria en plantas de N. benthamiana 16C determinaron que la p42 del STV no tenía actividad supresora de silenciamiento génico. Finalmente, estudiamos el efecto del STV en infecciones múltiples con otros virus agudos como el CMV y el PepMV. Se observaron complejas interacciones entre los virus que implicaban variaciones en la severidad de síntomas, en los niveles de acumulación viral y en las poblaciones de siRNAs. El STV y el CMV establecían una interacción sinérgica que producía el adelanto y aumento de la severidad de los síntomas, y de la acumulación del CMV en las primeras fases de la infección. La presencia del STV en plantas infectadas con el PepMV también producía un adelanto de los síntomas sin cambios en la acumulación viral del PepMV. En las plantas coinfectadas con el CMV y PepMV se observó un efecto antagónico que disminuía la concentración del CMV y alteraba los síntomas. El STV era capaz de romper este efecto antagónico restableciendo la concentración del CMV y modificando los síntomas. Los análisis de siRNAs permitieron identificar un total de 78 miRNAs, 47 noveles, que se expresaban diferencialmente en los grupos de plantas infectadas con los diferentes virus respecto a las plantas sin infectar. Estos miRNAs estaban implicados en la regulación de importantes funciones y tanto su número como su nivel de expresión variaba dependiendo de la combinación viral. También se identificaron vsiRNAs de origen viral y se vio que su proporción variaba dependiendo de la combinación viral. La cantidad de vsiRNAs del STV se incrementaba notablemente con la presencia de otros virus. La frecuencia de acumulación de vsiRNAs en los genomas virales no era uniforme y no se veía influenciada por las combinaciones de virus. / [CA] El virus meridional de la tomaca (Southern tomato virus, STV) és un virus persistent (gènere Amalgavirus, família Amalgaviridae) que s'ha detectat en diversos països com Espanya i Itàlia. Inicialment, STV va ser associat a distints símptomes de decoloració i anomalies en la maduració del fruit. Però la presència freqüent de virus aguts en les plantes infectades amb STV i la detecció d'aqueste en plantes asimptomàtiques, posen en dubte la seua patogenicitat i l'impacte que pot tindre en el cultiu. En aquesta tesi doctoral es va realitzar la posada al punt de la RT-LAMP i la RT- qPCR per a la detecció específica i sensible de STV. La RT-LAMP va permetre reduir costos i simplificar el procediment, sent útil per a la detecció del virus en camp. La RT-qPCR és una tècnica molt sensible que ens va permetre detectar i quantificar STV en distints tipus de teixits, incloent-hi llavors individuals. El virus s'acumulava principalment en arrels i fulles, i en les llavors es trobava tant en la coberta com en l'embrió. Es va comprovar que les taxes de transmissió per llavor, la incidència en camp i en vivers era molt elevada, major en les varietats comercials que en les locals. Els estudis filogenètics realitzats van mostrar que el virus tenia una baixa diversitat genètica amb una forta pressió de selecció negativa. No hi havia una correlació entre distància genètica del virus i origen geogràfic, degut per una ràpida dispersió a traves de llavors infectades i/o a la forta pressió de selecció negativa. En aquest treball es van obtindre evidències de què STV en condicions d'infecció simple no induïa símptomes en la planta, no alterava la producció, ni afectava paràmetres fisiològics com a conductivitat estomacal, fotosíntesi i pes en condicions d'estrés salí. Tampoc, es van observar cap presència de partícules virals ni canvis a nivell tissular ni cel·lular. No obstant això, STV era capaç de modificar l'expressió d'alguns miRNAs amb importants funcions. Es van detectar molt poca quantitat de vsiRNAs derivats del STV, podria deure's a la supressió del mecanisme de silenciamient gènic per acció d'un supressor. Els assajos d'expressió transitòria en plantes de N. benthamiana 16C va determinar que la p42 de STV no va tindre capacitat supressora de silenciamient gènic. Per finalitzar, vam estudiar l'efecte que podia tindre STV en infeccions mixtes amb altres virus aguts com CMV i PepMV. Els resultats obtinguts d'un assaig amb diferents combinacions d'infeccions van mostrar interaccions complexes entre els virus que implicaven variacions en la severitat de símptomes, en els nivells d'acumulació viral i en les poblacions de siRNA. STV i CMV establien una interacció sinèrgica que produïa l'avanç i l'increment dels símptomes, i un augment de l'acumulació de CMV. D'altra banda, la presència de STV en plantes infectades amb PepMV també produïa un avanç dels símptomes, però no hi havia variacions en l'acumulació de PepMV. En el grup de plantes co-infectades amb CMV i PepMV es va observar un efecte antagònic que dificultava la replicació de CMV, alterant-se els símptomes de la planta. STV era capaç de trencar aquest efecte antagònic restaurant la concentració de CMV i modificant els símptomes. Els anàlisis de siRNAs van permetre identificar un total de 78 miRNAs, 47 corresponien a miRNAs novells, que s'expressaven de forma diferent als grups de plantes infectades amb els diversos virus, respecte a les plantes control sense infectar. Aquests miRNAs estaven implicats en la regulació d'importants funcions i tant el seu nombre com el seu nivell d'expressió variaven. També es van identificar vsiRNAs d'origen viral i es va observar que la seua proporció variava depenent de la combinació viral. La quantitat de vsiRNAs de STV s'incrementava notablement amb la presència d'altres virus. Les freqüències de vsiRNA en els genomes virals no eren uniformes, no obstant això, els pat / [EN] Southern tomato virus (STV) is a persistent virus (genus Amalgavirus, family Amalgaviridae) which was detected in several countries such Spain and Italy. STV was associated with symptoms of discoloration and maturation of tomato fruit. However, STV was frequently detected in mixed infections with acute viruses and in some asymptomatic tomato plants. For these reasons, it is not clear the STV pathogenic role and its real impact on tomato crops. In this PhD we improved the specific and sensitive detection of the virus by using the RT-LAMP and RT-qPCR. RT-LAMP is very useful for field STV detection since it is a simple and cheap technique. The high RT-qPCR sensitivity enabled this technique to detect and quantify STV from different plant tissues even individual sees. The highest STV concentrations were found in tomato leaves and roots. In the seeds, STV could be detected in both coat and embryo. The virus transmission by seed and the STV incidence in fields and seedlings was very high, being higher in commercial tomato varieties than in local ones. Phylogenetic analysis from different STV isolates showed a low genetic diversity with a high negative selection pressure. Moreover, there was no correlation between genetic diversity and geographic region. This could be explained by a quick dispersion of infected seeds and/or by the high negative selection pressure. It was shown that STV did not induce any apparent plant symptom and did not affect the plant production in single infection conditions. Also, physiological parameters related to stomatic conductivity, photosynthesis, and plant weight were no affected by STV infection in saline stress conditions. Optic and transmission electron microscopy did not reveal viral particles or structural changes in STV tomato tissues. However, the population analysis of miRNAs showed that STV was able to modify the expression of some miRNAs which modulated important plant functions. Low vsiRNAs were detected in STV tomato infected plants. It could be produced by the action of a suppressor which could suppress the gene silencing pathway in the plants. A transient expression assay of p42 in N. benthamiana 16C plants did not show suppressor activity of this STV protein. Finally, we studied the effect of STV in mixed infections with other acute viruses such as CMV and PepMV. The virus mixes infection assay in tomato plants showed complex interactions between viruses that modify the symptoms severity, the viral accumulation and the siRNA population. STV and CMV established a synergistic interaction in co-infected tomato plants producing the advancement of the symptoms and an increase in its severity. STV and CMV co-infection increased the CMV accumulation in the early stages of infection. On the other hand, the presence of STV in plants co-infected with PepMV also produced an advance of symptoms, but with no variation in the PepMV accumulation. In the group of plants co-infected with CMV and PepMV, it was observed an antagonistic effect that delayed the CMV accumulation, altering the symptoms of the plant with respect to the simple infections. STV was able to break this antagonistic effect by increasing the CMV viral concentration and changing the symptomatology. The siRNAs analysis allowed to identify a total of 78 miRNAs, 47 corresponding to novel miRNAs, that were expressed differentially in the plants infected respect to no infected plants. These miRNAs were involved in the regulation of important functions and their number and their level of expression varied depending on the virus combination. vsiRNAs of the different viruses were also identified and it was observed that rates varied depending on the virus combination. The number of vsiRNAs in STV single infected tomato plants was very small, but it increased with the presence of the other viruses. The frequencies of vsiRNAs in the viral genomes were not uniform and these frequencies were not influenced by other viruses in mixed infections. / Elvira González, L. (2021). Detección y caracterización del virus meridional del tomate (STV) [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/165207

The research described here was inspired by a national review which concluded that too many children come into our primary schools with unmet speech and language needs (Bercow, 2008). Teachers are in a position to identify language difficulties but many have expressed uncertainty regarding their role in this process. I believed that the LAMP (Linguistic Assessment for Mapped Provision) screen for language and communication which I had developed would help teachers to identify language concerns and would also increase their professional confidence in this complex area. I had developed the LAMP screening instrument and piloted it over a 2 year period prior to this study. It is employed here as a universal screen that is used in a whole school approach in order to enable teachers to identify language need. The use of the LAMP as a universal screen applied to all the children in a school lessened the likelihood of preconceived notions impacting upon teacher’s perceptions of need in the classroom. The LAMP data allowed schools to track the progress of individual children within a class and whole school context. Teachers need to be aware of any pre-conceptions they may have in relation to the performance of children from different socio economic circumstances. The hypothesis that poverty continues to provide the weightiest detrimental effects upon children’s language development was examined and within the parameters of this study was found to be contestable. Study design: A systematic survey was conducted over 4 Primary schools using the LAMP. Rich picture data was accessed from teacher questionnaires and focus groups involving participants from the schools in the study. The repeated measures design provided information on what teachers had learned in the period of reflection between the screenings. The use of a mixed methods repeated measures design helped me to understand what was difficult for teachers and what the teachers felt would help them. The 4 schools in the study were chosen to reflect varied social contexts in order to explore any impacts of SES on the results. Analysis of data: In a repeated measures design, a LAMP screen was completed for every child across the 4 schools by their teachers in February and then June in one school year. Results of screening were analysed and compared on a range of variables using SPSS. Questionnaires were used to collect teacher perceptions before and after using the LAMP screen. Focus groups were held in the schools at the end of the study to add more information on how helpful teachers felt the process had been in raising their awareness, confidence, and skills in the identification of SLCN. Findings: The main trend observed was a decrease in levels of teacher concern related to children’s speech and language needs from the first to second screening survey. Differences were found at a statistically significant level on a range of variables. The expected differences between high and low socio-economic status (SES) schools were not found. Teachers reported increases in their awareness, confidence, and skill in identifying children’s speech language and communication concerns by the end of the study. Some changes to classroom practice were reported. Conclusions: I propose that use of the LAMP screen increased teacher awareness of the nature of language difficulty and that this heightened awareness was a key variable in the observed changes to language concern scores. The LAMP screening process was seen by schools’ staff to have had a positive effect on teacher’s skills and to be relatively easily assimilated into the school system. However some participants identified a number of challenges relating to time constraints and maintaining the use of LAMP as high profile in the context of competing time demands in their schools. It is suggested that EP services would be in a position to support schools to implement and embed the LAMP screening model as part of their Service provision. It is also proposed that economic deprivation or disadvantage did not appear to be the only important factor to consider when making funding decisions intended to support children’s linguistic competency in schools.

Neste trabalho foram realizados e estudados tratamentos superficiais sobre óxidos transparentes condutivos (TCOs) depositados sobre vidro, cuja aplicação ou finalidade é a montagem de dispositivos poliméricos eletroluminescentes. A principal intenção da utilização destes processos é diminuir a tensão de limiar e também aumentar a luminância desses dispositivos, sem interferir na transmitância original dos filmes. Três diferentes técnicas de tratamentos superficiais foram utilizadas: (a) Plasma de oxigênio; (b) Água-régia e (c) UV-Ozônio. Neste último processo, um reator foi montado utilizando uma lâmpada de vapor de mercúrio a alta pressão (tipo alta intensidade de descarga), sem o bulbo externo para fornecer a disponibilidade de radiação UV para a obtenção de ozônio a partir do ar atmosférico. Este reator com baixo custo e fácil manuseio foi montado para realizar um processo alternativo comparado aos dois processos anteriormente citados (Plasma de oxigênio e Água-Régia) e constitui o principal foco, comparando a partir de resultados experimentais obtidos por dispositivos montados, utilizando diferentes TCOs. Foi possível confirmar que o procedimento a partir do UV-Ozônio é reprodutível, pois pode substituir com vantagens as outras duas técnicas que apresentam custo mais elevado ou que exige manuseio especial. Pela utilização de diferentes períodos de tratamento como a única variável, nas condições estabelecidas durante os experimentos, foi mantida uma amostra sem tratamento para comparação em cada resultado obtido. Em comparação aos outros tratamentos, a técnica de UV-ozônio apresentou reprodutibilidade. Neste caso, verificamos que houve eliminação de contaminantes indesejáveis como carbono e hidrocarbonetos detectadas pela técnica de DRIFT (Diffuse Reflectance Infra-Red Fourier Transformed) e melhor espalhamento de polímero (PEDOT:PSS) sobre a superfície através da técnica de ângulo de contato foi observado. Para os filmes de ITO e FTO o período ótimo foi observado durante 5 minutos e para o ZnO, durante 15 minutos. Os resultados das medições de resistência de folha, espessura e efeito Hall, não revelaram significantes modificações. Revelando que as superfícies foram influenciadas apenas atomicamente ou molecularmente. / In this work superficial treatment on transparent conductive oxides (TCOs) were carried out and studied by application or finality for the assembly of electroluminescent polymeric devices. The mean intention by use of these processes is to decrease the threshold voltage and also increase the luminance of the devices, without interfering in the original TCOs transmittances. Three different treatment techniques were used: (a) oxygen plasma; (b) aqua regia and (c) UV-ozozne. In the he last one, a reactor was assembled using a high-pressure mercury vapor lamp (high intensity discharge lamp type) without outer bulb to provide the available UV radiation to obtain ozone from atmospheric air. This reactor with low cost and easy handle was mounted to accomplish an alternative process compared by other (oxygen plasma and aqua regia) and it has the main focus of this work compared from experimental results obtained by mounted devices using different TCOs. It was possible to confirm that the procedure from the UV-Ozone is reproducible, because it can replaced with advantages the other techniques that have expansive costs or special handling. The use of different treatment times as only variable on the imposed condition in the experiments, a sample was reserved without treatment for comparison during each obtained result. In comparison with other treatments the UV-Ozônio presented reproducibility. In this case was verified the undesirable contaminants eliminated as carbon and hydrocarbon and detected by DRIFT (Diffuse Reflectance Infra-Red Fourier Transformed) technique and better scattering of polymer (PEDOT:PSS) on surface by contact angle was observed. For ITO and FTO films the optimum period was observed during 5 minutes and ZnO during 15 minutes. The measurements results of sheet resistance, thickness and Hall effect revealed no significant changes confirming that the surfaces were influenced only atomically or molecularly only.

Objetivo: Este estudo se propõe a verificar a influencia do tipo de luz fotopolimerizadora na força de retenção de pinos intra-radiculares, tanto na técnica direta como na direta indireta. Métodos: 40 raízes de dentes bovinos com comprimento de 12 mm foram tratadas endodonticamente e divididas aleatoriamente em 4 grupos de acordo com a técnica de obtenção dos pinos e luz fotopolimerizadora (n=10): grupo 1 (técnica direta associada à lâmpada halogena); grupo 2 (técnica direta ao LED); grupo 3 (técnica direta-indireta associada à lampada halógena); e grupo 4 (técnica direta-indireta associada ao LED). A força de retenção foi determinada através do teste de tração usando Universal Testing Machine (Instron). Todos os dados foram analisados usando one-way analysis of variance (ANOVA) com a significância de p<0.05 e complementadas com teste de Tukey. Após o teste, as interfaces adesivas onde ocorreram as falhas foram examinadas e classificadas. Resultado: Os grupos 3 (246,05N ± 29,51) e 4 (241,60N ± 28,95) não apresentaram força de retenção estatisticamente diferente mas foram maiores que os grupos 1 (142,30N ± 25,60) e 2 (178,56N ± 25,67). A maior parte das fraturas ocorreu na interface dentina/resina. Conclusão: Com base nos resultados obtidos, concluímos que o método direto-indireto proporcionou a melhor retenção dos pinos de fibra de vidro. / Objectives: The purpose of this study is to verify the influence of light curing type on retention force of direct technique and direct-indirect technique. Methods: Fourth bovine single root teeth with 12mm of length were used in this study. The roots were endodontically treated and randomly divided in four groups according to the light curing unit and technique used: group 1(direct technique, halogen lamp), group 2(direct technique, LED), group 3(direct-indirect technique, halogen lamp), group 4(direct-indirect technique, lamp). The retention force was determined sing a Universal Testing Machine (Instron). All data were analyzed using one-way analysis of variance (ANOVA) and Tukey test. After the test, the failure was examined and classified according to the fracture place: post/ resin; resin/dentin; mix. Results: Group 3 (246,05N ± 29,51) and 4(241,60N ± 28,95)4 (95,18N) did not show statistically difference but presented higher retention force than group 1 (142,30N ± 25,60) and 2 (178,56N ± 25,67). Most of fracture occurred in interface between dentin/resin. Conclusion: Based on the obtained results, it was concluded that adhesive cementation technique influenced in the retention of glass fiber post.

Neste trabalho foram realizados e estudados tratamentos superficiais sobre óxidos transparentes condutivos (TCOs) depositados sobre vidro, cuja aplicação ou finalidade é a montagem de dispositivos poliméricos eletroluminescentes. A principal intenção da utilização destes processos é diminuir a tensão de limiar e também aumentar a luminância desses dispositivos, sem interferir na transmitância original dos filmes. Três diferentes técnicas de tratamentos superficiais foram utilizadas: (a) Plasma de oxigênio; (b) Água-régia e (c) UV-Ozônio. Neste último processo, um reator foi montado utilizando uma lâmpada de vapor de mercúrio a alta pressão (tipo alta intensidade de descarga), sem o bulbo externo para fornecer a disponibilidade de radiação UV para a obtenção de ozônio a partir do ar atmosférico. Este reator com baixo custo e fácil manuseio foi montado para realizar um processo alternativo comparado aos dois processos anteriormente citados (Plasma de oxigênio e Água-Régia) e constitui o principal foco, comparando a partir de resultados experimentais obtidos por dispositivos montados, utilizando diferentes TCOs. Foi possível confirmar que o procedimento a partir do UV-Ozônio é reprodutível, pois pode substituir com vantagens as outras duas técnicas que apresentam custo mais elevado ou que exige manuseio especial. Pela utilização de diferentes períodos de tratamento como a única variável, nas condições estabelecidas durante os experimentos, foi mantida uma amostra sem tratamento para comparação em cada resultado obtido. Em comparação aos outros tratamentos, a técnica de UV-ozônio apresentou reprodutibilidade. Neste caso, verificamos que houve eliminação de contaminantes indesejáveis como carbono e hidrocarbonetos detectadas pela técnica de DRIFT (Diffuse Reflectance Infra-Red Fourier Transformed) e melhor espalhamento de polímero (PEDOT:PSS) sobre a superfície através da técnica de ângulo de contato foi observado. Para os filmes de ITO e FTO o período ótimo foi observado durante 5 minutos e para o ZnO, durante 15 minutos. Os resultados das medições de resistência de folha, espessura e efeito Hall, não revelaram significantes modificações. Revelando que as superfícies foram influenciadas apenas atomicamente ou molecularmente. / In this work superficial treatment on transparent conductive oxides (TCOs) were carried out and studied by application or finality for the assembly of electroluminescent polymeric devices. The mean intention by use of these processes is to decrease the threshold voltage and also increase the luminance of the devices, without interfering in the original TCOs transmittances. Three different treatment techniques were used: (a) oxygen plasma; (b) aqua regia and (c) UV-ozozne. In the he last one, a reactor was assembled using a high-pressure mercury vapor lamp (high intensity discharge lamp type) without outer bulb to provide the available UV radiation to obtain ozone from atmospheric air. This reactor with low cost and easy handle was mounted to accomplish an alternative process compared by other (oxygen plasma and aqua regia) and it has the main focus of this work compared from experimental results obtained by mounted devices using different TCOs. It was possible to confirm that the procedure from the UV-Ozone is reproducible, because it can replaced with advantages the other techniques that have expansive costs or special handling. The use of different treatment times as only variable on the imposed condition in the experiments, a sample was reserved without treatment for comparison during each obtained result. In comparison with other treatments the UV-Ozônio presented reproducibility. In this case was verified the undesirable contaminants eliminated as carbon and hydrocarbon and detected by DRIFT (Diffuse Reflectance Infra-Red Fourier Transformed) technique and better scattering of polymer (PEDOT:PSS) on surface by contact angle was observed. For ITO and FTO films the optimum period was observed during 5 minutes and ZnO during 15 minutes. The measurements results of sheet resistance, thickness and Hall effect revealed no significant changes confirming that the surfaces were influenced only atomically or molecularly only.

Cette thèse de doctorat porte sur les fluctuations temporelles du flux lumineux des lampes LED, ce phénomène portant le nom de papilottement (flicker). Le papillotement est habituellement considéré comme une perturbation en raison de son impact négatif sur la santé. Pour les systèmes d'éclairage à base de diodes électroluminescentes (LED), sa définition vient d'être formalisée dans la norme IEEE 1789:2015 et a été décrite pour les appareils alimentés en courant alternatif (CA). Ce papillotement alternatif résulte des interactions entre l'impédance du réseau, l'onde de tension, les courants harmoniques et le convertisseur de courant alternatif en courant continu (CA - CC). L'alimentation en courant continu est généralement obtenue via des convertisseurs à découpage. Par conséquent, les mêmes facteurs perturbateurs sont également présents sur les réseaux à courant continu. Cette thèse résume les diférences entre les propriétés caractéristiques du papillotement sous alimentation en CA et en CC. Il a été montré dans la littérature et aussi dans cette thèse qu'avec les LED, le facteur clé qui affecte le papillotement réside dans la conception du driver de LED - une partie indispensable des systèmes d'éclairage à LED. Cette thèse décrit une méthodologie d'évaluation de la sensibilité au papillotement des lampes LED sous alimentation en CC et analyse la façon dont cette sensibilité se modifie lorsque les drivers de LED sont simplifiés et adaptés à des alimentations CC. La thèse présente un ensemble d'expériences de mesure visant à déterminer la réaction typique du papillotement des lampes LED à la fois sous alimentation CA et CC. D'autres expériences ont été efectuées pour révéler l'impact de l'adaptation du driver à l'alimentation CC (en enlevant le pont redresseur à diodes). On constate que certaines lampes présentent une meilleure résistance au papillotement, tandis que d'autres lampes présentent une moindre résistance. Ces expériences sont accompagnées de simulations de drivers pour les lampes LED visant à reproduire et à expliquer les résultats des mesures. La thèse décrit en outre une expérience de mesure visant à montrer la sévérité typique de la variation de tension dans un réseau CC à basse tension couplé au CA domestique et son impact sur le papillotement. On conclut qu'un tel système est suisamment robuste pour filtrer les perturbations provenant du CA, mais une interaction indésirable entre la lampe et l'alimentation peut se produire. / This dissertation thesis is concerned with temporal fluctuations of the luminous flux of LED lamps, a phenomenon referred to as flicker. Flicker is usually regarded as a disturbance due to its negative impact on human health. For lighting systems based on light emitting diodes (LED), its definition has recently been formalised in norm IEEE 1789-2015 and has been documented on devices supplied with AC voltage. AC flicker results from interactions between network impedance, voltage and current harmonics, and the AC to DC converter. DC supplies are generally obtained by switching converters. Consequently, the same perturbing factors are present on DC networks. The thesis summarises the differences between the characteristic properties of flicker under AC and DC supplies. It has been shown in the literature and also in this thesis that the key factor affecting flicker with LEDs is the design of the LED driver-a necessary part of the LED lighting systems. This thesis describes a methodology for the evaluation of the flicker sensitivity of DC supplied LED lamps and analyses how the sensitivity changes when the LED drivers are simplified and accustomed to DC supply. The thesis presents a set of measurement experiments aimed to determine the typical flicker response of LED lamps both under AC and DC supply. Further experiments were performed to reveal the impact of accustomising the driver to the DC supply (removing the diode rectifier). It was found that some lamps show better flicker immunity while other lamps show worse flicker immunity. These experiments are accompanied by LED driver simulations aiming to reproduce and explain the measurement results. The thesis further describes a measurement experiment aimed to show the typical severity of the voltage fluctuation in a low voltage DC network coupled to AC mains and its impact on the flicker. It is concluded that such a system is robust enough to filter out any perturbations coming from the AC supply, but an undesired interaction between the lamp and the supply may occur.

Orientador: Prof. Dr. Jorge Tomioka / Dissertação (mestrado) - Universidade Federal do ABC, Programa de Pós-Graduação em Engenharia Elétrica, 2014. / Este trabalho apresenta um estudo para a área de iluminação residencial, por meio da utilização da tecnologia de iluminação do estado sólido LED (diodos emissores de luz). Seu objetivo principal é apresentar a economia de energia elétrica para o país trazendo soluções mais eficientes para nossas residências, inclusive podendo ser estendido a outros setores, como indústria e comércio. Isso gerará economia de energia elétrica para o País e favorecerá a preservação do meio ambiente, com a diminuição da emissão de dióxido de carbono (CO2), produzindo impacto imediato na utilização de energia elétrica e prorrogando os grandes investimentos em geração de energia elétrica no Brasil, fazendo reduzir os gastos do dinheiro público. Para a pesquisa, foram levantados vários conceitos aplicados a luminotécnica, para um maior aprofundamento e consolidação dos resultados. Após a fase de pesquisa dos conceitos, foram estudadas as características das diferentes tecnologias de lâmpadas de uso residencial. Foi montada uma bancada para os ensaios das amostras, facilitando a realização das medições, o levantamento de algumas características técnicas, tais como potência da lâmpada, fator de potência, fluxo luminoso e eficiência luminosa. Com a estratificação desses resultados, foi elaborado um estudo de viabilidade econômica entre as três tecnologias de lâmpadas, mostrando o tempo de retorno do investimento. Em seguida, foram realizadas simulações entre as tecnologias de lâmpadas com projeção do consumo de energia elétrica para o ano de 2021. Com a realização deste trabalho cientifico, foi possível chegar a conclusões fundamentais acerca da melhor tecnologia de lâmpada que pode ser aplicada no País no setor residencial. / This work presents a study for the residential lighting through the use of solid-state lighting technology LED ( light emitting diodes ). Its main purpose is to present the economics of electricity for the country bringing more efficient solutions for our homes, and may even be extended to other sectors such as industry and commerce. This will generate electricity savings for the country and encourage the preservation of the environment, with the reduction in the emission of carbon dioxide (CO2), producing immediate impact on electricity usage and extending large investments in power generation in Brazil doing reduce spending of public money . For the research, various concepts applied to illumination, for further development and consolidation of results were collected. After the research phase of the concepts, characteristics of different technologies lamps residential use were studied. A workbench was assembled for testing the samples, facilitating the measurements, raising some technical features, such as the lamp power, power factor, luminous flux and luminous efficiency. Stratification with these results, an economic feasibility study between the three technologies lamps was prepared, showing the time of investment return. Then simulations between technologies of projection lamps with electricity consumption for the year 2021 were performed. With the completion of this scientific work, it was possible to reach basic conclusions about the best lamp technology that can be applied in the Country residential sector.