1 |
Applying vertical mirror reflector and ring resonator in the design and fabrication of photonic integrated devicesTseng, Wen-Hsin 30 July 2007 (has links)
The purpose of this thesis is to design and fabricate vertical mirror reflector. We fabricated semiconductor laser and optical filter by vertical mirror reflector and bended waveguide. By this design, we could bend the incident optical mode and get the power splitter with coupling coefficient is 0, 0.15 and 0.5. In order to make total internal reflection in vertical reflective mirror, we used ICP-RIE dry etching process to fabricate vertical and smooth mirror. By BPM simulation, we showed that the device volume was decreased to 50%.
In the semiconductor laser, we fabricated the Fabry-Perot laser by optical waveguide reflector with one input and two inputs. In addition, we also fabricated a reformatory Fabry-Perot laser by the ring resonator with one 3dB coupler, two 90o angle reflectors, and bended waveguide.
In the semiconductor optical filter, we design 2¡Ñ2 90o angle reflector whose coupling coefficient is 0.15, and ring resonator with two 2¡Ñ2 90o reflector and bended waveguide.
In fabrication process, first, we defined the device pattern by using photo-lithography technique. Second, we etched ridge waveguide by using dry etching and wet etching method. In order to decrease the scattering loss, we deep etched bended waveguide and the reflector. Then, we etched the reflector mirror by ICP-RIE dry etching process. Finally, we used polyimide to flatten the sides of the ridge waveguide and evaporated metal electrode.
In the device characteristic, we obtained a power splitter with 65 percent and 35 percent output. It demonstrates that the light was reflected from reflective mirror to output port.
|
2 |
Ringe mit eindeutiger Addition /Nelius, Christian-Frieder. January 1974 (has links)
Gesamthochsch., Diss.--Paderborn, 1974.
|
3 |
Berechnung von Maximalordnungen über DedekindringenFriedrichs, Carsten. January 2000 (has links) (PDF)
Berlin, Techn. Univ., Diss., 2000. / Computerdatei im Fernzugriff.
|
4 |
Moduln mit aufsteigender Kettenbedingung für n-erzeugte Untermoduln und bestimmte AnnihilatorenFrohn, Daniel. January 2002 (has links) (PDF)
Hannover, Universiẗat, Diss., 2002.
|
5 |
Dualitätssätze für Hopf-Algebren über RingenAbuhlail, Jawad Y. January 2001 (has links) (PDF)
Düsseldorf, Universiẗat, Diss., 2001.
|
6 |
Upper bounds for local cohomology modules of rings with a given Hilbert functionSbarra, Enrico. January 2000 (has links) (PDF)
Essen, University Diss., 2000.
|
7 |
Applications of Schur rings in algebraic combinatorics graphs, partial difference sets and cyclotomic schemes /Heinze, Aiso. January 2001 (has links)
Oldenburg, University, Diss., 2001. / Dateiformat: zip, Dateien in unterschiedlichen Formaten.
|
8 |
On representability of *-regular rings and modular ortholatticesMicol, Florence. January 2003 (has links) (PDF)
Darmstadt, Techn. University, Diss., 2003.
|
9 |
The Structure of the Carbonyl Ring of LycopodineCurcumelli-Rodostamo, Michael D. 05 1900 (has links)
The structure of lycopodine was investigated in the neighbourhood of the carbonyl group. The results obtained enabled the elucidation of a large part of the peripheral structure of the alkaloid. / Thesis / Master of Science (MS)
|
10 |
Some effects of density on behavior and physiology of confined populations of wild ring-necked pheasants /Balding, Terry Allen January 1967 (has links)
No description available.
|
Page generated in 0.0517 seconds