The purpose of this dissertation was to broadly investigate the fate of antibiotic resistance genes (ARGs) and engineered nanomaterials (ENMs) as representative contaminants of emerging concern in wastewater treatment plants (WWTPs). WWTPs may have their performance impacted by ENMs and may also serve as a reservoir and point of release for both ENMs and ARGs into the environment. Of interest were potential adverse effects of ENMs, such as stimulation of antibiotic resistance in the WWTP, toxicity to microbial communities critical for WWTP performance, and toxicity to humans who may be exposed to effluents or aerosols containing ENMs and their transformation products. Response of nine representative ARGs encoding resistance to sulfonamide, erythromycin and tetracycline to various lab-scale sludge digestion processes were examined, and factors that drove the response of ARGs were discussed. Mesophilic anaerobic digestion significantly reduced sulI, sulII, tet(C), tet(G), and tet(X) with longer solids retention time (SRT) exhibiting a greater extent of removal. Thermophilic anaerobic digesters performed similarly to each other and provided more effective reduction of erm(B), erm(F), tet(O), and tet(W) compared to mesophilic digestion. Thermal hydrolysis pretreatment drastically reduced all ARGs, but they generally rebounded during subsequent anaerobic and aerobic digestion treatments. Bacterial community composition of the sludge digestion process, as controlled by the physical operating characteristics, was indicated to drive the distribution of ARGs present in the produced biosolids, more so than the influent ARG composition. Effects of silver (nanoAg), zero-valent iron (NZVI), titanium dioxide (nanoTiO2) and cerium dioxide (nanoCeO2) nanomaterials on nitrification function and microbial communities were examined in duplicate lab-scale nitrifying sequencing batch reactors (SBRs), relative to control SBRs received no materials or ionic/bulk analogs. Nitrification function was only inhibited by high load of 20 mg/L Ag+, but not by other nanomaterials or analogs. However, decrease of nitrifier gene abundances and distinct microbial communities were observed in SBRs receiving nanoAg, Ag+, nanoCeO2, and bulkCeO2. There was no apparent effect of nanoTiO2 or NZVI on nitrification, nitrifier gene abundances, or microbial community structure. A large portion of nanoAg remained dispersed in activated sludge and formed Ag-S complexes, while NZVI, nanoTiO2 and nanoCeO2 were mostly aggregated and chemically unmodified. Thus, the nanomaterials appeared to be generally stable in the activated sludge, which may limit their effect on nitrification function or microbial community structure. Considering an aerosol exposure scenario, cytotoxicity and genotoxicity of aqueous effluent and biosolids from SBRs dosed with nanoAg, NZVI, nanoTiO2 and nanoCeO2 to A549 human lung epithelial cells were examined, and the effects were compared relative to outputs from SBRs dosed with ionic/bulk analogs and undosed SBRs, as well as pristine ENMs. Although the pristine nanomaterials showed varying extents of cytotoxicity to A549 cells, and gentoxicity was observed for nanoAg, no significant cytotoxic or genotoxic effects of the SBR effluents or biosolids containing nanomaterials were observed. Studies presented in this dissertation provided new insights in the fate of ARGs in various sludge digestion processes and ENMs in nitrifying activated sludge system in lab-scale reactors. The study also yielded toxicity data of ENMs to biological wastewater treatment microbial communities and human lung cells indicated by a variety of toxicity markers. The results will aid in identifying appropriate management technologies for sludge containing ARGs and will inform microbial and human toxicity assessments of ENMs entering WWTPs. / Ph. D.

The aim of this study was to examine how manure-derived value-added products via anaerobic digestion impact the environment and economics of dairy farming. An on-farm anaerobic digester (AD) at Virginia dairy was used in this study. The AD performance evaluated for: (i) biogas production (ii) waste stabilization; and (iii) production of organic fertilizer. Locally available organic waste streams were evaluated for co-digestion with dairy manure to increase biomethane production at the on-farm AD. The effective pasteurization temperature and duration to reduce fecal coliform, E. coli, and Salmonella concentrations in the AD effluent to acceptable levels for use as an organic fertilizer were determined. A partial environmental and economic analysis was conducted on the AD system to determine its effects on the environmental-economic sustainability of dairy farming. The results showed that the manure-derived value-added products from the AD improved environmental health and had the potential to improve the economic sustainability of the dairy farm. The AD stabilized the manure adequately and produced 400 KW of electricity, enough to power 230 US homes. Blending manure with locally available organic materials increased volatile fatty acid production, suggesting the potential to increase biomethane yields. Pasteurization at 70°C is sufficient to reduce pathogen indicating organisms to acceptable levels for the manure to be used as an organic fertilizer. The payback periods range from 4.6 to 11.8 years for the AD investment costs and reductions in direct manure methane emissions of 2,436 tonnes CO2e per year. / Master of Science

Yes / A novel Lattice-Boltzmann model to simulate gas mixing in anaerobic digestion is developed and described. For the first time, Euler–Lagrange multiphase, non-Newtonian and turbulence modelling are applied jontly with a novel hybrid boundary condition. The model is validated in a laboratory-scale framework and flow patterns are assessed through Particle Imaging Velocimetry (PIV) and innovative Positron-Emission Particle Tracking (PEPT). The model is shown to reproduce the experimental flow patterns with fidelity in both qualitative and quantitative terms. The model opens up a new approach to computational modelling of the complex multiphase flow in anaerobic digesters and offers specific advantages, such as computational efficiency, over an analogous Euler-Lagrange finite-volume computational fluid dynamics approach. / UK EPSRC Grant (EP/R01485X/1, Computational Methods for Anaerobic Digestion Optimization, “CoMAnDO”). The numerical work was performed in the HPC Cirrus EPSRC Tier-2 National HPC Facility, Edinburgh, UK, under a UK EPSRC Tier-2 Research Allocation Panel (RAP) award.

Thesis (MScEng (Process Engineering))--University of Stellenbosch, 2010. / ENGLISH ABSTRACT: Due to the growing demands for fresh and clean water, the investigation into the treatment, reuse and recycling of wastewater from all industries are becoming more of a priority, both globally and in South Africa where as much as 62 % of the total water used per year is used by the agricultural sector. The investigation into the recycling and reuse of wastewater in the agricultural sector (especially the dairy farming industry) is therefore no exception. The water usage in five typical South African milking parlours was estimated in this study and ranged from 15 to 51 L.cow-1.day-1. However, the water used for the cleaning in place (CIP) washing of the milking equipment were rather similar in all five milking parlours and ranged between 4.9 and 6.4 L.cow-1.day-1. The possibility of handling and treating the CIP wastewater separately from the rest of the milking parlour wastewater has been considered in the past by other researchers. Anaerobic digestion, as a means of treating wastewater from the dairy industry, has been employed successfully in both full scale and laboratory scale projects. The wastewater from equipment washing of milking parlours is assumed to have similar characteristic to that generated from dairy factories. The anaerobic sequencing batch reactor (ASBR) system is gaining popularity as a wastewater treatment technology lately due to its simplicity, ease of operation and compact design and is therefore expected to be a suitable and practical solution for dairy farmers in treating milking parlour wastewater from equipment washing. Investigation into anaerobic treatment at lower temperatures than the conventional mesophilic range is also becoming of interest due to lower energy requirements. The aim of this study was to determine whether the ASBR technology could be considered as a suitable technology for treating wastewater from the CIP washing of milking parlour equipment. To support this study, the water usage and CIP effluent generated at typical South African milking parlours were firstly verified. Subsequently, laboratory work entailed: • Assessing the sensitivity of the ASBR process (at mesophilic temperature of 35 °C) to fluctuations in the concentration of the detergents in synthetic CIP milking parlour wastewater; and • Evaluating the performance of the ASBR process at 22.5 and 35 °C when treating real wastewater from the CIP washing of milking equipment. Chemical oxygen demand (COD) removal efficiencies between 89 and 98 % were achieved when the synthetic wastewater (similar to wastewater from the CIP washing of milking equipment with COD concentrations ranging between 12 600 and 13 400 mg.L-1) was treated in an ASBR. The results showed that an increase in the CIP detergent concentration up to four times the concentration normally used in milking parlours did not significantly affect the ASBR performance in terms of methane productivity, methane yield and COD removal efficiencies when OLRs between 0.6 and 5.2 g COD.L-1.day-1 were applied. The results also showed that COD removal efficiencies between 92 and 98 % could be achieved in the ASBR process operated at 35 °C when treating real CIP milking parlour effluent (with COD concentrations ranging between 14 900 and 28 800 mg.L-1) when applying OLRs up to 6.6 g COD.L-1.day-1, without nutrient control. Therefore, the ASBR process is suitable to treat real milking parlour wastewater with OLRs above 6 g COD.L-1.day-1 at mesophilic temperatures. At an operating temperature of 22.5 °C, the ASBR achieved TCOD removal efficiencies between 86 and 98 % when treating real CIP effluent. Despite these high COD removal efficiencies, the reactor failed at an OLR of 2.9 g COD.L-1.day-1. As such, the ASBR process appears to be susceptible to failure (due to overloading) when the OLR is increased too rapidly at this low operating temperature. This is most probably due to the fact that methanogenic bacteria do not acclimatise and operate as well at temperatures below the mesophilic range. However, during a second attempt at 22.5 oC, the ASBR achieved COD removal efficiencies between 89 and 97 % when the OLR was increased less rapidly, up to 3.3 g COD.L-1.day-1. These results show that the ASBR process can indeed treat real milking parlour wastewater at 22.5 °C without nutrient control at OLRs above 3 g COD.L-1.day-1. The COD concentration in the effluent from the ASBRs when the maximum OLRs were applied were always below 1 000 mg.L-1. This is notably lower than the South African legal limit for irrigation of up to 50 m3 of wastewater per day. However, this is significantly higher than the South African legal limit of 75 mg.L-1 for safe disposal into a fresh water body. / AFRIKAANSE OPSOMMING: Die wêreldwye toename in die aanvraag na vars, skoon water het tot gevolg dat die ondersoek in die behandeling, hergebruik en herwinning van afvalwater tans groot aandag geniet. Nie net wêreldwyd nie, maar ook in Suid-Afrika waar tans 62 % van die water wat gebruik word per jaar, aangewend word vir die lanbou sektor. Daarom is die ondersoek na besparing van water in lanbou aktiwiteite (veral melkboerderye) geen uitsondering nie. Die watergebruik tydens melktyd in 5 verskillende melkerye is ondersoek en dit blyk dat die watergebruik in die 5 melkery drasties van mekaar verskil. Dit strek van ‘n minimum van 15 litres per koei per dag tot ‘n maksimum van 51 liters per koei per dag. Die volume water wat gebruik word vir die outomatiese was van die melktoerusting het nie so baie gevarieer nie en het gestrek tussen 4.9 en 6.4 liter per koei per dag. Die moontlikheid om die afvalwater wat gegenereer word tydens die outomatiese was van die melktoerusting apart te hou van die res van die afvalwater, is in die verlede deur ander navorsers oorweeg. Afvalwater van suiwelfabrieke is in die verlede al deur middel van anaerobiese vertering in ‘n groot aantal laboratorium- en volskaalse anaerobiese aanlegte behandel. Daar word aangeneem dat die afvalwater wat gegenereer word tydens die was van melktoerusting min of meer dieselfde samestelling sal hê as die afvalwater van suiwelfabrieke. Die anaerobiese opvolgende lot reaktor (AOLR) word al hoe meer gewild in anaerobiesewaterbehandeling as gevolg van die eenvoudige en maklike werking en kompakte ontwerp. Dit word verwag dat hierdie tegnologie ‘n gepaste en praktiese oplossing sal wees om die afvalwater van die was van melktoerusting te behandel. Die anaerobiese behandeling van afvalwater by temperature laer as die normale mesofiliese temperature word ook al hoe meer gewild as gevolg van minder hitte wat benodig word. Die doel van hierdie studie was om te bepaal of die AOLR tegnologie ‘n gepaste tegnologie is om afvalwater wat gegeneer word tydens die outomatiese was proses van melkery toerusting te behandel. Ter ondersteuning van die doel, is die watergebruik in ‘n paar tipiese, Suid- Afrikaanse melkerye eers bevestig. Daaropvolgend, het die laboratoriumwerk die volgende behels: • The bepaal of die AOLR proses (wat by mesofiliese temperatuur van 35 °C bedryf was) sensitief is vir veranderinge in die konsentrasie van sepe in sintetiese waswater wat na ‘n AOLR gevoer word; en • Om die werking van die AOLR proses te ondersoek wanneer regte afvalwater van melkery by onderskeidelik 22.5 en 35 °C behandel word. Chemiese suurstof behoefte (CSB) verwydering van 89 to 98 % is bereik toe sintetiese afvalwater wat gelykstaande aan afvalwater gegenereer tydens die was van melk toerusting is (met CSB konsentrasies tussen 12 600 en 13 400 mg.L-1) in ‘n AOLR behandel is. Die resultate het getoon dat daar geen aanmerklike verskil in die werking van die AOLR in terme van metaanproduksie, metaanopbrengs en CSB verwyderingseffektiwiteit was met a toename tot en met so hoog as vier maal die normale seepkonsentrasie in die afvalwater was toe organiese ladingstempo’s (OLTs) tussen 0.6 en 5.2 g CSB.L-1.dag-1 aangewend was nie. Die resultate het ook getoon dat die CSB van regte afvalwater van melkerye (met CSB konsentrasies tussen 14 900 en 28 800 mg.L-1) met 92 tot 98 % verminder kan word wanneer dit in ‘n AOLR (wat by 35 °C bestuur word) en OLTs tot so hoog as 6.6 g CSB.L-1.dag-1 aangewend word, sonder dat die nutrientinhoud in die afvalwater beheer was. Hierdie AOLR proses wat is dus gepas om afvalwater van melkery te behandel met OLTs bo 6 CSB.L-1.dag-1 by mesofiliese temperature. Die AOLR wat by ‘n temperatuur van 22.5 °C bedryf was, het CSB verwydering tussen 86 en 98 % behaal. Ondanks die hoë CSB verwydering het die reaktor misluk by ‘n maksimum OLT van 2.9 g CSB.L-1.dag-1. Dit het getoon dat die AOLR proses meer geneig is om vatbaar te wees vir mislukking (as gevolg van ‘n oorlading) wanneer die OLT te vinnig verhoog word by laer temperature. Dit is moontlik as gevolg daarvan dat die metanogeniese bakterieë nie so goed aanpas en werk by temperature laer as mesofiliese temperature nie. Nietemin, tydens ‘n tweede probeerslag by 22.5 °C, het die AOLR CSB verwydering tussen 89 en 97 % behaal tydens ‘n stadiger toename in die OLT tot en met 3.3 g CSB.L-1.dag-1. Hierdie resultate dui aan dat die AOLR proses wat by ‘n temperatuur van 22.5 °C bedryf word ook gepas is om afvalwater van melkerye te behandel, sonder nutrient beheer by OLTs hoër as 3 g CSB.L-1.dag-1. Die CSB konsentrasies in die afvloeisel van die AOLR’e in die studie tydens die aanwending van die hoogste OLTs, was altyd laer as 1 000 mg.L-1. Dit is merkbaar laer as die limiet vir besproeiing van tot en met 50 m3 per dag in Suid-Afrika. Maar, dit was nogtans regdeur hoër as die limiet van 75 mg.L-1 vir veilige storting in ‘n varswaterbron.

The research describes an optimized waste-to-energy technology that utilizes agricultural residues for renewable energy, while reducing global methane emissions and maintaining food security. Laboratory-, pilot- and farm-scale anaerobic batch digesters were evaluated to enhance methane production from the anaerobic digestion of untreated rice straw in dry conditions using a novel co-digestion approach. An existing farm-scale biogas plant loaded with rice straw and piggery wastewater produced 295 MWh in a 422-day digestion cycle. The long acclimation period (approximately 200 days) and low biogas yield (181 LCH4/kgVS) could be enhanced by adding anaerobic sludge from the pulp and paper mill treatment process. In a laboratory setting, the addition of the sludge resulted in a specific methane yield of 335 LCH4/kgVS within 92 days. Hydrolysis of the straw was accelerated, and stable conditions were observed in terms of pH, alkalinity and nutrients. Similar improvements were demonstrated in pilot-scale digesters (1 m3) - a specific methane yield of 231 LCH4/kgVS was achieved in a 93-day digestion cycle with the sludge compared to 189 days without the sludge. Insufficient mixing within the pilot-scale system caused lower overall methane yields than those obtained in the laboratory-scale digesters. If sufficient mixing and mesophilic conditions are maintained within the farm-scale system, the co-digestion of rice straw with pig wastewater and paper mill sludge (wet weight ratio of 1:1.25:0.5) has the potential to reduce the retention time to three months (versus 422 days) and increase methane yields to over 300 LCH4/kgVS

Dry Anaerobic Digestion (AD) presents different advantages if compared to wet AD, i.e. smaller reactor size, lesser water addition, digestate production and pretreatment needed, although several studies have demonstrated that water promotes substrate hydrolysis and enables the transfer of process intermediates and nutrients to bacterial sites. To better understand the role of water on AD, dry and semidry digestion tests of selected complex organic substrates (food waste, rice straw, carrot waste), with various TS contents of the treated biomass have been carried out in the present study. The results confirm that water plays an essential role on the specific methane production rate, final methane yield and Volatile Solids (VS) degradation. The final methane yield in semi-dry and dry conditions was 51% and 59% lower for rice straw and 4% and 41% lower for food waste, respectively, if compared with wet conditions. Inhibition tests, based on Volatile Fatty Acid (VFA) analysis, were carried out to investigate the specific inhibition processes that take place with the selected substrates at different TS contents. In wet AD of carrot waste no VFA accumulation was found, and all VFA concentrations were lower than the inhibition limits. A direct correlation between TS content and total VFA (TVFA) concentration was noticed for rice straw and food waste AD. For rice straw a maximum TVFA concentration of 2.1 g/kg was found in dry condition, 1 g/kg in semidry conditions and 0.2 g/kg in wet conditions, whereas for food waste the TVFA concentration was 10 g/kg in dry condition, 9 g/kg in semidry conditions and 3 g/kg in wet conditions. A Mathematical model of complex organic substrate AD in dry and semidry conditions has been proposed to simulate the effect of TS content on the process. The data obtained from batch experiments, in terms of methane production and VFA concentrations, were used to calibrate the proposed model. The kinetic parameters of VFA production and degradation, calibrated using the experimental data, resulted highly dependent on the TS content and different from wet AD literature values. This is due to VFA accumulation in dry conditions, which implies higher values of the inhibition factors introduced in the model. Finally, as dry AD takes usually place in Plug Flow (PF) reactors, an historical and critical review on the role of hydrodynamics in PF bioreactors has been carried out

The UK buries about 100 million tonnes of waste a year, of which 25% is municipal solid waste (refuse). The environmental impacts from gas and leachate releases are known and direct risks to health from landfill are reported. Europe has agreed to a Landfill Directive which has set targets for the stepwise reduction in biodegradable municipal waste going to landfill. The anaerobic digestion of municipal solid waste in controlled bioreactors is an area that could play an important role in overall evolution towards sustainability by recovering biogas and organic matter. Separated hydrolysis and subsequent anaerobic codigestion was demonstrated from the literature review to have the best potential for biodegradable municipal waste diverted from landfill. The rate of hydrolysis of solids wastes remains an outstanding problem. In this research, firstly the codigestion of industrial effluent (coffee wastewater), food wastes and garden wastes were investigated for their impact on hydrolysis and digestion. The results show that there were no treatability problems for coffee wastes up to 37.5% of volume feed per day at the HRT of 9 days. The results supported the view that dilute biodegradable streams such as coffee waste may improve digestion by promoting mixing. Fruit and vegetable wastes were highly biodegradable and can have a major improvement in biogas production of the whole codigestion process, whereas garden waste was not as successful as a cosubstrate, probably because of the predominant celluloses and lignocelluloses with a low biodegradability. The literature review also revealed that washing or elutriation can remove organic matter from municipal waste. This is an important hydrolytic process in which a solubilised acidic organic matter is obtained. The codigestion of refuse hydrolysate with sewage sludge was therefore studied. A control digester treating sewage sludge only was compared with an experimental reactor fed mixed refuse hydrolysate with sewage sludge. It was possible to add the solubilised hydrolysate to existing anaerobic digesters designed at a standard sludge solids loading rate without causing overloading. (Continues...).

La digestion anaérobie est un moyen de traitement des déchets solides produisant de l'énergie sous forme de biogaz (méthane et dioxyde de carbone). L'optimisation de la production de méthane passe par une sélection des déchets à fort potentiel méthane. Actuellement, la mesure du potentiel méthane est réalisée par le test BMP (Biochemical Methane Potential), qui repose sur une fermentation pouvant durer plus de 30 jours, ce qui est trop long pour une installation industrielle. Une méthode rapide de détermination du potentiel méthane est donc nécessaire. Le BMP est lié uniquement à la quantité et à la qualité de la matière organique. Cette méthode doit donc réaliser une analyse globale et rapide de la matière organique. L'objectif de la thèse a été d'identifier et d'étudier une méthode rapide d'analyse de la matière organique de déchets solides permettent de prédire le potentiel méthane. Suite au travail bibliographique, la spectroscopie proche infrarouge s'est révélée la méthode la plus appropriée: analyse globale et rapide, non destructive, préparation d'échantillon réduite, possibilité d'utiliser des fibres optiques pour déporter la mesure. Nous avons ensuite étudié des étalonnages pour prédire le potentiel méthane d'un ensemble homogène de 74 déchets. Un coefficient de corrélation de 0,76 et un écart standard de prédiction (RMSEP) de 28 ml CH4.g-1 MV ont été obtenus. Ensuite, les coefficients du modèle ont été analysés par rapport aux molécules présentes et rapprochés des variables sélectionnées par algorithme génétique afin de valider ce modèle d'un point de vue chimique. Enfin, la robustesse de ce modèle vis à vis de l'origine des échantillons et de l'humidité a été testée. Les résultats montrent clairement le fort potentiel de la spectroscopie proche infrarouge pour la prédiction du potentiel méthane. Pour une utilisation industrielle, il ressort qu'une attention particulière doit être portée sur l'ensemble d'étalonnage, qui doit être le plus exhaustif possible. / Anaerobic digestion is a solution to process solid waste, while producing energy by biogas production (methane and carbon dioxide). Methane production could be optimized by selecting only wastes with high methane potential. Currently, the BMP (Biochemical Methane Potential) test is conducted to predict the methane potential. This test is based on a fermentation process. It is time consuming, sometimes, lasting over 30 days, which is too long from an industrial point of view. A rapid method for determining the methane potential is therefore urgently needed. The BMP value depends only on the quantity and the quality of the organic matter, so a method capable of determining the quality and quantity of organic matter is searched for. The objective of this thesis was to identify and study such a method. First, a bibliographic study led us to chose the near infrared (NIR) spectroscopy method: fast and global analysis of the organic matter, non-destructive method, few or no sample preparation, and remote monitoring by use of fiber optics. Second, a calibration for predicting the BMP of and homogenous sample set has been built based on a 74-waste sample set. A correlation coefficient of R² = 0,76 and a standard error of prediction (RMSEP = 28 ml CH4.g-1 VS). Then, the regression coefficients (called b coefficients) were analysed with regard to the molecules in the waste and were compared to the variables selected from the spectrum, in order to validate the model from a chemical point of view. Finally, the robustness of the model, regarding the waste origins and the moisture was tested with heterogeneous samples set. Results show the potential of the near infrared spectroscopy to predict the methane potential quickly, but attention must be paid on the calibration data set when an industrial implementation is dealt with..

The use of microalgae culture to convert CO2 from power plant flue gases into biomass that are readily converted into biofuels offers a new frame of opportunities to enhance, compliment or replace fossil-fuel-use. Apart from being renewable, microalgae also have the capacity to utilise materials from a variety of wastewater and the ability to yield both liquid and gaseous biofuels. However, the processes of cultivation, incorporation of a production system for power plant waste flue gas use, algae harvesting, and oil extraction from the biomass have many challenges. Using SimaPro software, Life cycle Assessment (LCA) of the challenges limiting the microalgae (Chlorella vulgaris) biofuel production process was performed to study algae-based pathway for producing biofuels. Attention was paid to material use, energy consumed and the environmental burdens associated with the production processes. The goal was to determine the weak spots within the production system and identify changes in particular data-set that can lead to and lower material use, energy consumption and lower environmental impacts than the baseline microalgae biofuel production system. The analysis considered a hypothetical transesterification and Anaerobic Digestion (AD) transformation of algae-to- biofuel process. Life cycle Inventory (LCI) characterisation results of the baseline biodiesel (BD) transesterification scenario indicates that heating to get the biomass to 90% DWB accounts for 64% of the total input energy, while electrical energy and fertilizer obligations represents 19% and 16% respectively. Also, Life Cycle Impact Assessment (LCIA) results of the baseline BD production scenario show high proportional contribution of electricity and heat energy obligations for most impact categories considered relative to other resources. This is attributed to the concentration/drying requirement of algae biomass in order to ease downstream processes of lipid extraction and subsequent transesterification of extracted lipids into BD. Thus, four prospective alternative production scenarios were successfully characterised to evaluate the extent of their impact scenarios on the production system with regards to lowering material use, lower energy consumption and lower environmental burdens than the standard algae biofuel production system. A 55.3% reduction in mineral use obligation was evaluated as the most significant impact reduction due to the integration of 100% recycling of production harvest water for the AD production system. Recycling also saw water demand reduced from 3726 kg (freshwater).kgBD- 1 to 591kg (freshwater).kgBD- 1 after accounting for evaporative losses/biomass drying for the BD transesterification production process. Also, the use of wastewater/sea water as alternative growth media for the BD production system, indicated potential savings of: 4.2 MJ (11.8%) in electricity/heat obligation, 10.7% reductions for climate change impact, and 87% offset in mineral use requirement relative to the baseline production system. Likewise, LCIA characterisation comparison results comparing the baseline production scenarios with that of a set-up with co-product economic allocation consideration show very interesting outcomes. Indicating -12 MJ surplus (-33%) reductions for fossil fuels resource use impact category, 52.7% impact reductions for mineral use impact and 56.6% reductions for land use impact categories relative to the baseline BD production process model. These results show the importance of allocation consideration to LCA as a decision support tool. Overall, process improvements that are needed to optimise economic viability also improve the life cycle environmental impacts or sustainability of the production systems. Results obtained have been observed to agree reasonably with Monte Carlo sensitivity analysis, with the production scenario proposing the exploitation of wastewater/sea water to culture algae biomass offering the best result outcome. This study may have implications for additional resources such as production facility and its construction process, feedstock processing logistics and transport infrastructure which are excluded. Future LCA study will require extensive consideration of these additional resources such as: facility size and its construction, better engineering data for water transfer, combined heat and power plant efficiency estimates and the fate of long-term emissions such as organic nitrogen in the AD digestate. Conclusions were drawn and suggestions proffered for further study.

Resumo: A suinocultura atingiu índices elevados de produtividade por meio do emprego de avançadas tecnologias de produção, resultando em maior geração de dejeto líquido suíno (DLS) com grande potencial de contaminação de águas mananciais. O resíduo de hortifruti (RH) é produzido em grandes quantidades nos mercados atacadistas, sendo caracterizado pelo elevado teor de umidade e de compostos orgânicos voláteis, o que causa efeitos negativos nos sistemas tradicionais de destinação dos resíduos sólidos urbanos. A codigestão de dejetos suínos e resíduos orgânicos vem sendo amplamente estudada, com melhorias na degradação dos substratos em digestão e, consequentemente, dos rendimentos de biogás. Assim, neste trabalho, avaliou-se o desempenho da codigestão de dejetos de suínos e crescentes níveis de resíduos de hortifrúti, utilizando-se um delineamento fatorial de experimentos 2³ (3 fatores, 2 níveis) seguido de modelagem matemática para descrever o volume de metano acumulado durante o bioprocesso. Para a realização dos ensaios, foram preparadas misturas de substratos compostas por dejeto líquido suíno e resíduo de hortifruti nas relações 4:1, 2,5:1 e 1:1, as quais foram inoculadas e digeridas em frascos batelada por tempos de retenção hidráulica de 20 a 30 dias e temperaturas de 35 a 45°C. Os maiores rendimentos foram de 455,47 e 442,37 NmL CH4/g SVT e ocorreram nos ensaios com relação DLS:RH de 2,5:1 e 1:1, respectivamente. A relação DLS:RH foi significante para o acúmulo de metano durant... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: Swine production reached high levels of productivity through the use of technology, resulting in higher generation of swine manure (SM) with great potential for ground water contamination. Fruit and vegetable waste (FVW) are produced in large quantities in wholesale markets, characterized by high moisture content and volatile organic compounds, causing negative effects in the traditional systems of municipal solid waste disposal. The codigestion of swine manure and organic wastes has been widely explored, with improvements in the degradation of the substrates in digestion and, consequently, of the biogas yields. Thus, in this work, the performance of the codigestion of SM and increasing levels of FVW were evaluated using a factorial design of experiments 2³ (3 factors; 2 levels) followed by mathematical modelling to describe the volume of methane accumulated during the bioprocess. In order to carry out the assays, mixtures of substrates composed of SM and FVW were prepared in the ratios 4:1, 2,5:1 e 1:1, which were inoculated and digested in batches with hydraulic retention times of 20 to 30 days and temperatures of 35 to 45 °C. The maximum yields were 455.47 and 442.37 NmL CH4 / g VS and occurred in assays with 2.5:1 and 1:1 SM:FVW ratios, respectively. The SM:FVW ratio was significant for the accumulation of methane during the process, while the hydraulic retention time was not significant at a 95% confidence level. The temperature was marginally significant, with a higher ... (Complete abstract click electronic access below) / Mestre