<p>In this work, a simple, less time consuming electrochemical method in the form of an electrochemical sensor has been developed for the detection of PAHs. The sensor was fabricated by the deposition of silver-gold (1:3) alloy nanoparticles (Ag-AuNPs) on ultrathin overoxidized polypyrrole (PPyox) film which formed a PPyox/Ag-AuNPs composite on glassy carbon electrode (PPyox/Ag-AuNPs/GCE). The silver-gold alloy nanoparticles deposited to form the composite were chemically prepared by simultaneous reduction of silver nitrate (AgNO3) and chloroauric acid (HAuCl4) using sodium citrate and characterized by UV-visible spectroscopy technique which confirmed the homogeneous formation of the alloy nanoparticles.</p>

Magister Scientiae - MSc / Polyaromatic hydrocarbons (PAHs) are ubiquitous environmental pollutants that have been shown to be teratogenic, mutagenic and carcinogenic and pose serious threats to the health of aquatic and human life. Several methods have been developed for their determination such as immunoassay, gas chromatography and high performance liquid chromatography (HPLC) in combination with fluorescence or absorbance detection. However, these methods are known to manifest underlying disadvantages such as complicated pretreatment, high costs and time consuming processes. In this work, a simple, less time consuming electrochemical method in the form of an electrochemical sensor has been developed for the detection of PAHs. The sensor was fabricated by the deposition of silver-gold (1:3) alloy nanoparticles (Ag-AuNPs) on ultrathin overoxidized polypyrrole (PPyox) film which formed a PPyox/Ag-AuNPs composite on glassy carbon electrode (PPyox/Ag-AuNPs/GCE). The silver-gold alloy nanoparticles deposited to form the composite were chemically prepared by simultaneous reduction of silver nitrate (AgNO3) and chloroauric acid (HAuCl4) using sodium citrate and characterized by UV-visible spectroscopy technique which confirmed the homogeneous formation of the alloy nanoparticles. Transmission electron microscopy showed that the synthesized nanoparticles were in the range of 20-50 nm. The properties of the composite formed upon deposition of the nanoparticles on the PPyox film were investigated by electrochemical methods. The PPyox/Ag-AuNPs/GCE sensor showed strong catalytic activity towards the oxidation of anthracene, phenanthrene and pyrene, and was able to simultaneously detect anthracene and phenanthrene in a binary mixture of the two. The catalytic peak currents obtained from square wave voltammetry increased linearly with anthracene, phenanthrene and pyrene concentrations in the range of 3.0 x 10-6 to 3.56 x 10-4 M,3.3 x 10-5 to 2.83 x 10-4 M, 3.3 x 10-5 to 1.66 x 10-4 M and with detection limits of 0.169 μM, 1.59 μM and 2.70 μM, respectively. The PPyox/Ag-AuNPs/GCE sensor is simple, has antifouling properties and is less time consuming with a response time of 4 s. / South Africa

Der elektrochemische Nachweis von polycyclischen aromatischen Kohlenwasserstoffen (PAK), zu denen Anthracen und Pyren gehören, bietet eine kostengünstigere, einfachere und schnellere alternative Analysemethode als herkömmliche Methoden wie GC und HPLC. Im Vergleich zu diesen Methoden weist er jedoch nach wie vor eine geringere Empfindlichkeit auf. Einige neuere Bemühungen haben an einem Mangel an Selektivität gelitten, entweder aufgrund der elektrodenmodifizierende Schicht mit hohem Hintergrundstrom oder der Wahl eines Leitelektrolyten, der die Detektion stört. Bei dem vorliegenden Versuch wurden Pt-Pd-Nanopartikel (NPs) und MWCNTs verwendet, um eine Glaskohlenstoffelektrode (GCE) zum empfindlichen Nachweis von Anthracen und Pyren zu modifizieren. Die verwendeten NPs wurden unter Verwendung eines wässrigen Extrakts aus Blättern von E. grandis synthetisiert, einem nachhaltigen und umweltfreundlichen Syntheseweg. Durch einer Optimierung der Mengen an Pt- und Pd-Ionen im Vorläufer wurden NPs mit einer durchschnittlichen Größe von 10 nm erhalten, wobei ein Verhältnis von 1 Pt-Ion zu 3 Pd-Ionen die kleinste Größe ergab. Durch XPS wurde festgestellt, dass die Zusammensetzung der NPs von Pt2+ und Pd0 dominiert wird. Die XRD-Analyse ergab eine kristalline Natur mit einer flächenzentriert-kubischen Struktur. Die Pt-Pd-NPs bewirkten eine Erhöhung des Spitzenstroms um 94 % für Pyren, führten jedoch zu niedrigeren Spitzenströmen für Anthracen. Wenn die NPs weiter mit MWCNTs zum Nachweis von Pyren verwendet wurden, wurde eine Spitzenstromsteigerung von etwa 200 % mit einem Dynamikbereich von 66–130 μM und einer LOD von 23 μM beobachtet. Es wurde auch festgestellt, dass der elektrochemische Prozess gemischt diffusions- und adsorptionskontrolliert ist. Aufgrund des Einflusses der Adsorption musste die Akkumulationszeit im Analyseverfahren berücksichtigt werden. MWCNTs wurden beim Nachweis von Anthracen angewendet, wobei eine Erhöhung des Spitzenstroms um 74 % und eine Verringerung des Überpotentials um 53 mV beobachtet wurde. Ein dynamischer Bereich von 50–146 µM und eine LOD von 42 µM wurden bestimmt. Niedrigere Konzentrationen wurden mit einer Leitungswasserprobe gemessen, die mit Anthracen versetzt war, hauptsächlich wegen der geringen Löslichkeit von PAK in Wasser. Der Einfluss der Säurebehandlung von MWCNTs auf den Nachweis von Anthracen und Pyren wurde ebenfalls untersucht. Die Säurebehandlung ermöglichte das Laden von mehr Material ohne Ablösen der modifizierten Schicht, was zu höheren Spitzenstromverbesserungen für Anthracen (533 %) und Pyren (448 %) führte. Für Anthracen und Pyren wurden LODs von 40 µM bzw. 14 µM bestimmt, die nur geringfügig niedriger sind als die bei MWCNTs/GCE und Pt-PdNPs/MWCNTs/GCE beobachteten Werte. Der Nachweis von Anthracen wurde durch die Anwesenheit von Pyren und gewöhnlichen Ionen gestört, während die LOD für Pyren in Gegenwart von Anthracen 18 µM betrug. Es wurde festgestellt, dass die auf MWCNTs basierende elektrochemische Nachweisplattform eine bessere Reaktion auf Pyren aufweist.:Bibliographische Beschreibung i Referat i Abstract iii Zeitraum, Ort der Durchführung v Acknowledgements vi Dedication vii Table of Contents viii List of Abbreviations and Symbols xii Chapter 1 1 Introduction 1 1.1 Overview 1 1.2 Polycyclic Aromatic Hydrocarbons 2 1.3 Electrochemical Sensors 7 1.3.1 General Response Curve for Chemical Sensors 10 1.4 Carbon Nanotubes 13 1.5 Use of Nanoparticles in Electrochemical Detection 18 1.6 Green Synthesis of Nanoparticles and The Rationale Behind It 21 1.7 Previous Efforts in the Electrochemical Detection of Polycyclic Aromatic Hydrocarbons 24 1.8 Objectives of the Study 26 Chapter 2 28 Experimental 28 2.1 Chemicals 28 2.1.1 Preparation of Anthracene and Pyrene Solutions 28 2.2 Collection and Preparation of Plant Material 29 2.3 Synthesis and Preparation of Materials 29 2.3.1 Synthesis of Metallic Nanoparticles 29 2.3.2 Acid Treatment of Multi-walled Carbon Nanotubes 30 2.4 Characterization of the Nanomaterials 30 2.4.1 UV-Vis Spectrophotometry 30 2.4.2 SEM/EDX and TEM Analysis 30 2.4.3 Powder X-ray Diffractometry 31 2.4.4 XPS Analysis 31 2.5 Electrochemical Measurements 31 2.5.1 Preparation of the Bare and Modified Glassy Carbon Electrode 32 2.5.2 Characterization of the Bare and the Modified Glassy Carbon Electrode 33 2.5.3 Electrocatalytic Oxidation of Anthracene on the Bare and Modified GCEs 33 2.5.4 Electrocatalytic Oxidation of Pyrene on the Bare and Modified GCEs 34 Chapter 3 35 Synthesis, Characterization, and Application of Pt-Pd Nanoparticles in the Electrochemical Detection of Anthracene and Pyrene 35 3.1 Test for Flavonoids and Polyphenols in the E. grandis Leaves’ Extract 35 3.2 Synthesis of Nanoparticles 35 3.3 Characterization of Nanoparticles 37 3.3.1 TEM Analysis 37 3.3.2 SEM Analysis 40 3.3.3 EDX Analysis 41 3.3.4 Powder X-Ray Diffraction Analysis 45 3.3.5 XPS Analysis of Pt-Pd Particles 46 3.4 Impedance Measurements of the Bare and Nanoparticle-modified Glassy Carbon Electrode 49 3.5 Electrochemical Oxidation of Anthracene and Pyrene at the Bare and Nanoparticles-modified Glassy Carbon Electrode 51 3.6 Conclusions 53 Chapter 4 55 Pt-PdNPs/MWCNTs-Modified GCE for the Detection of Pyrene 55 4.1 Impedance Measurement with Pt-PdNPs/MWCNTs/GCE 55 4.2 Electrochemical Oxidation of Pyrene on Pt-PdNPs/MWCNTs/GCE 56 4.3 Analysis of Varying Concentrations of Pyrene on Pt-PdNPs/MWCNTs/GCE 59 4.4 Selectivity 61 4.5 Conclusions 62 Chapter 5 64 Exploring Multi-walled Carbon Nanotubes for the Detection of Anthracene 64 5.1 Impedance Measurement of MWCNT-Modified Glassy Carbon Electrode 64 5.2 Electrochemical Oxidation of Anthracene on MWCNT/GCE 65 5.3 Analysis of Varying Concentrations of Anthracene Using MWCNTs/GCE 68 5.4 Detection of Anthracene in Tap Water 71 5.5 Conclusions 72 Chapter 6 73 Effect of Acid Treatment of Multi-walled Carbon Nanotubes on the Detection of Anthracene and Pyrene 73 6.1 Characterization of fMWCNTs 74 6.2 Electrochemical Oxidation of Anthracene on fMWCNTs/GCE 75 6.2.1 Effect of Change in Scan Rate 76 6.2.2 Effect of Accumulation Time 77 6.2.3 Application of fMWCNTs/GCE in the Analysis of Varying Concentrations of Anthracene 77 6.3 Electrochemical Oxidation of Pyrene on fMWCNTs/GCE 79 6.4 Selectivity 82 6.4.1 Co-detection of Anthracene and Pyrene at fMWCNTs/GCE 83 6.4.2 Interference of Some Common Ions 85 6.5 Detection of Pyrene in Tapwater using fMWCNTs/GCE 86 6.6 Conclusions 87 Chapter 7 88 Summary and Outlook 88 7.1 Summary 88 7.2 Outlook 90 References 92 Selbständigkeitserklärung 101 Curriculum Vitae 102 / Electrochemical detection of polycyclic aromatic hydrocarbons (PAHs), which include anthracene and pyrene, offers a cheaper, simpler, and faster alternative method of analysis than conventional methods like GC and HPLC. However, it still is not as sensitive as these methods. Some recent efforts have suffered from lack of selectivity, either from the electrode modifying layer having high background current or from the choice of supporting electrolyte interfering with the detection. In this work, Pt-Pd nanoparticles (NPs) and MWCNTs were used to modify a glassy carbon electrode (GCE) for sensitive detection of anthracene and pyrene. The NPs used were synthesized using an aqueous extract from E. grandis leaves, a sustainable and environmentally friendly synthetic route. NPs with an average size of 10 nm were obtained by optimizing the amounts of Pt- and Pd-ions in the precursor, with a ratio of 1:3 Pt to Pd-ions producing the smallest size. Through XPS, the composition of the NPs was established to be dominated by Pt2+ and Pd0. XRD analysis revealed a crystalline nature with a face-centered cubic structure. The Pt-Pd NPs produced 94 % enhancement in the peak current for pyrene but resulted in lower peak currents for anthracene. When the NPs were further used with MWCNTs for the detection of pyrene, about 200% peak current enhancement was observed with a dynamic range of 66–130 µM and LOD of 23 µM. The electrochemical process was also established to be mixed diffusion- and adsorption-controlled. The influence of adsorption necessitated the employment of accumulation time in the analysis procedure. MWCNTs were applied in the detection of anthracene and a 74 % peak current enhancement and a reduction in the overpotential by 53 mV were observed. A dynamic range of 50–146 µM and LOD of 42 µM were determined. Lower concentrations were recovered from a tap water sample that was spiked with anthracene, mainly because of the low solubility of PAHs in water. Effect of acid treatment of MWCNTs on the detection of anthracene and pyrene was also investigated. Acid treatment allowed for loading of more material without peeling off of the modified layer which resulted in higher peak current enhancements for anthracene (533%) and pyrene (448%). LODs of 40 µM and 14 µM were determined for anthracene and pyrene respectively, which are only slightly lower than what was observed at MWCNTs/GCE and Pt-PdNPs/MWCNTs/GCE. Detection of anthracene was interfered by the presence of pyrene and common ions, while the LOD for pyrene in the presence of anthracene was 18 µM. The MWCNTs based electrochemical detection platform was found to have a better response towards pyrene.:Bibliographische Beschreibung i Referat i Abstract iii Zeitraum, Ort der Durchführung v Acknowledgements vi Dedication vii Table of Contents viii List of Abbreviations and Symbols xii Chapter 1 1 Introduction 1 1.1 Overview 1 1.2 Polycyclic Aromatic Hydrocarbons 2 1.3 Electrochemical Sensors 7 1.3.1 General Response Curve for Chemical Sensors 10 1.4 Carbon Nanotubes 13 1.5 Use of Nanoparticles in Electrochemical Detection 18 1.6 Green Synthesis of Nanoparticles and The Rationale Behind It 21 1.7 Previous Efforts in the Electrochemical Detection of Polycyclic Aromatic Hydrocarbons 24 1.8 Objectives of the Study 26 Chapter 2 28 Experimental 28 2.1 Chemicals 28 2.1.1 Preparation of Anthracene and Pyrene Solutions 28 2.2 Collection and Preparation of Plant Material 29 2.3 Synthesis and Preparation of Materials 29 2.3.1 Synthesis of Metallic Nanoparticles 29 2.3.2 Acid Treatment of Multi-walled Carbon Nanotubes 30 2.4 Characterization of the Nanomaterials 30 2.4.1 UV-Vis Spectrophotometry 30 2.4.2 SEM/EDX and TEM Analysis 30 2.4.3 Powder X-ray Diffractometry 31 2.4.4 XPS Analysis 31 2.5 Electrochemical Measurements 31 2.5.1 Preparation of the Bare and Modified Glassy Carbon Electrode 32 2.5.2 Characterization of the Bare and the Modified Glassy Carbon Electrode 33 2.5.3 Electrocatalytic Oxidation of Anthracene on the Bare and Modified GCEs 33 2.5.4 Electrocatalytic Oxidation of Pyrene on the Bare and Modified GCEs 34 Chapter 3 35 Synthesis, Characterization, and Application of Pt-Pd Nanoparticles in the Electrochemical Detection of Anthracene and Pyrene 35 3.1 Test for Flavonoids and Polyphenols in the E. grandis Leaves’ Extract 35 3.2 Synthesis of Nanoparticles 35 3.3 Characterization of Nanoparticles 37 3.3.1 TEM Analysis 37 3.3.2 SEM Analysis 40 3.3.3 EDX Analysis 41 3.3.4 Powder X-Ray Diffraction Analysis 45 3.3.5 XPS Analysis of Pt-Pd Particles 46 3.4 Impedance Measurements of the Bare and Nanoparticle-modified Glassy Carbon Electrode 49 3.5 Electrochemical Oxidation of Anthracene and Pyrene at the Bare and Nanoparticles-modified Glassy Carbon Electrode 51 3.6 Conclusions 53 Chapter 4 55 Pt-PdNPs/MWCNTs-Modified GCE for the Detection of Pyrene 55 4.1 Impedance Measurement with Pt-PdNPs/MWCNTs/GCE 55 4.2 Electrochemical Oxidation of Pyrene on Pt-PdNPs/MWCNTs/GCE 56 4.3 Analysis of Varying Concentrations of Pyrene on Pt-PdNPs/MWCNTs/GCE 59 4.4 Selectivity 61 4.5 Conclusions 62 Chapter 5 64 Exploring Multi-walled Carbon Nanotubes for the Detection of Anthracene 64 5.1 Impedance Measurement of MWCNT-Modified Glassy Carbon Electrode 64 5.2 Electrochemical Oxidation of Anthracene on MWCNT/GCE 65 5.3 Analysis of Varying Concentrations of Anthracene Using MWCNTs/GCE 68 5.4 Detection of Anthracene in Tap Water 71 5.5 Conclusions 72 Chapter 6 73 Effect of Acid Treatment of Multi-walled Carbon Nanotubes on the Detection of Anthracene and Pyrene 73 6.1 Characterization of fMWCNTs 74 6.2 Electrochemical Oxidation of Anthracene on fMWCNTs/GCE 75 6.2.1 Effect of Change in Scan Rate 76 6.2.2 Effect of Accumulation Time 77 6.2.3 Application of fMWCNTs/GCE in the Analysis of Varying Concentrations of Anthracene 77 6.3 Electrochemical Oxidation of Pyrene on fMWCNTs/GCE 79 6.4 Selectivity 82 6.4.1 Co-detection of Anthracene and Pyrene at fMWCNTs/GCE 83 6.4.2 Interference of Some Common Ions 85 6.5 Detection of Pyrene in Tapwater using fMWCNTs/GCE 86 6.6 Conclusions 87 Chapter 7 88 Summary and Outlook 88 7.1 Summary 88 7.2 Outlook 90 References 92 Selbständigkeitserklärung 101 Curriculum Vitae 102

Idag är de vanligaste använda raketerna flytande-bränsle- och fast-bränsle- raketer. Flytande-bränsle-raketer har fördelen att det kan manövreras men de har en komplex design och problem med förvaring. Fast-bränsle-raketer har en enkel design och kan förvaras men de har en miljöpåverkan och bränslet kan vara svårhanterligt. En tredje typ av raketer, hybridraketer, kan kombinera enkelheten från fasta-bränsle-raketer med manövreringsbarheten från vätske-bränsle-raketer. Trots fördelarna med hybridraketer används de inte på grund av att bränslet har låg regressionshastighet och låg densitet. Organiska additiv har visat sig förbättra dessa egenskaper. 50 organiska additiv granskades med avseende på deras specifika impuls, densitet, kostnad och användarvänlighet. De mest lovande organiska additiven utvärderades sedan experimentellt. Termogravimetrisk analys (TGA), isotermviktförlust, kompatibilitet och differentiell svepkalorimetri (DSC) användes. Resultaten indikerar att hexamin, fluorene, anthracene och 1,4-dicyanobenzene har mest potential att förbättra bränslet i hybridraketer. / Liquid propellant and solid propellant rockets are the most commonly used rockets Liquid propellant rockets have the advantage of being manoeuvrable with a high specific performance while they exhibit problems with storage and a complex design. Solid propellant rockets offer simplicity and are storable while they have a large environmental impact and could be difficult to handle. A third type of rocket, hybrid propellant rocket has the potential to combine the simplicity of solid propellant rocket with the manoeuvrability of liquid propellant rockets. While the hybrid propellant rocket offers advantages over liquid propellant and solid propellant rocket it have problems with its fuel which have a low regression rate and low density. Organic fillers were evaluated since they may increase in the regression rate and the density of the solid fuel. 50 organic fillers were assessed with regards to their specific impulse, density, cost and handling properties. The organic fillers with the most promising properties were then experimentally evaluated. Thermogravimetric analysis (TGA), isothermal weight loss test, compatibility test and differential scanning calorimetry analysis were conducted. The results indicate that hexamine, fluorene, anthracene and 1,4-dicyanobenzene are the most suitable organic fillers of those evaluated..

No description available.

No description available.

Dans ce travail, nous nous sommes concentrés sur la création de nanostructures chirales optiquement actives en fabriquant des nanohélices de silice fluorescente afin d’obtenir des matériaux souple, nanométriques, optiquement actifs pour des applications en tant que matériaux nanophotoniques. Dans cette optique, des nanohélices de silice chirales ont été utilisées pour greffer et organiser des nanocristaux inorganiques fluorescents achiraux tels que des quantums dots, des chromophores, des molécules et des polymères fluorescents selon différentes approches. Ces hélices inorganiques ont été formées par procédé sol-gel en utilisant des auto-assemblages hélicoïdaux organiques de molécules amphiphiles (amphiphile gemini cationique, avec un contre-ion chiral le tartrate) en tant que modèles. Tout d'abord, la surface de la silice hélicoïdale a été fonctionnalisée par l’APTES afin de greffer des quantum dots inorganiques ZnS-AgInS2 possédant divers ligands. Dans la deuxième partie, le polymère de dérivé anthracénique fluorescent a été organisé par dépôt et adsorption à la surface de silice hélicoïdale. Afin d’étudier les propriétés chiroptiques, différentes caractérisations ont été réalisées telle que la spectroscopie du dichroïsme circulaire (CD) et celle de la luminescence circulairement polarisée (CPL).Le premier chapitre présente l’étude bibliographique sur différents systèmes d’auto-assemblage organiques chiraux et leurs propriétés chiroptiques. Les études sur la formation de systèmes auto-assemblés chiraux dans différentes conditions, leur morphologie structurale, les techniques de fabrication et leurs applications sont discutées suivies de l'utilisation de nanocristaux fluorescents, à savoir, les quantums dots (QD) et les polymères fluorescents achiraux sur lesquels les propriétés chiroptiques peuvent être obtenues et leurs applications dans les nanodispositifs optiques, les capteurs et la nano-photonique.Dans la première partie du deuxième chapitre, différentes techniques de caractérisation telles que le microscope électronique en transmission (TEM), le microscope électronique en transmission haute résolution (HRTEM), la microscopie confocale, la spectroscopie UV-Vis, celle de la fluorescence, du dichroïsme circulaire (CD) et de la luminescence circulairement polarisée (CPL) sont décrites. Dans la deuxième partie, la synthèse du gemini 16-2-16 ainsi que son mécanisme d'auto-assemblage, et sa transformation en réplica de silice par l'intermédiaire de la chimie sol-gel sont décrits. Ces nanohélices de silice sont fonctionnalisées par le 3-aminopropyltriéthoxysilane (APTES). Leur analyse est effectuée par analyse thermogravimétrique (TGA) et analyse élémentaire (EA).Dans le troisième chapitre, nous nous sommes concentrés sur la synthèse de QDs inorganiques ((ZnS)x-1(AgInS2)x) avec différentes compositions rapport molaire et leurs caractérisations par TEM, TGA, EA, spectroscopie infrarouge à transformée de Fourier (FTIR), mesures de potentiel zêta, spectroscopie d'absorption et d'émission. Quatre types de ligands ont été utilisés, par échange de ligand, pour recouvrir les QDs : sulfure d'ammonium (AS), acide 3-mercaptopropionique (MPA), l-cystéine (L-Cys) et l'oleylamine (OLA). Ces QDs sont greffés à la surface des hélices de silice modifiée par de l’amine suite à des interactions ioniques. Diverses techniques ont été utilisées pour confirmer leur greffage à la surface des hélices de silice, et les propriétés optiques ont été étudiées par spectroscopie d'absorption et d'émission. Après le greffage, différents résultats ont été observés selon le ligand utilisé : la caractérisation par TEM montre que les QDs sont greffés à la surface des hélices de silice. [...] / In this work, we focused on the creation of optically active chiral nanostructures by fabricating fluorescent silica nanohelices in order to obtain optically active nanoscale soft materials for applications as nanophotonics materials. For this purpose, silica chiral nanohelices were used for grafting and organizing achiral fluorescent inorganic nanocrystals, dyes, molecules, and fluorescent polymers through different approaches. These inorganic helices were formed via sol-gel method using organic helical self–assemblies of surfactant molecules (achiral and cationic gemini surfactant, with chiral counterion, tartrate) as templates. First, the surface of helical silica was functionalized by APTES in order to graft inorganic quantum dots ZnS-AgInS2 with different capping ligands. In the second part, fluorescent anthracene derivative polymer was organized via deposition and absorption on the surface of helical silica. To investigate the chiroptical properties, circular dichroism and circularly polarised luminescence characterization were performed.In the first chapter, the bibliographic study on different chiral organic self-assembling systems and their chiroptical properties are shown. The studies on the formation of chiral self-assembled systems in different conditions, structural morphology, fabrication techniques and their applications are discussed followed by the use of fluorescent nanocrystals, i.e., quantum dots (QDs) and achiral fluorescent polymers on which chiroptical properties can be obtained and their applications in optical nanodevices, sensors, and nano-photonics.In the first part of the second chapter, different characterisation techniques such as transmission electron microscope (TEM) , high resolution transmission electron microscope (HRTEM), and confocal microscopy, UV-Vis spectroscopy and fluorescence spectroscopies, as well as circular dichroism (CD) and circularly polarised luminescence (CPL) spectroscopies are described. In the second part, the synthesis of Gemini 16-2-16 as well as their self-assemblies mechanism, and their transformation to silica replica via sol-gel chemistry are described. These silica nanohelices are functionalized by 3-aminopropyltriethoxysilane (APTES). Their analysis is performed by Thermogravimetric analysis (TGA) and elementary analysis (EA).In the third Chapter, we focused on the synthesis of inorganic ((ZnS)x-1(AgInS2)x) QDs with different compositions molar ratio and its characterizations by TEM, TGA, EA, Fourier-transform infrared spectroscopy (FTIR), zeta potential measurements, absorption, and emission spectroscopy. Four types of ligands were used to cap the QDs via phase ligand exchange as follows: ammonium sulphide (AS), 3-mercaptopropionic acid (MPA), l-cysteine (L-Cys) and the fourth one is oleylamine (OLA). These QDs are grafted on the surface of amine-modified silica helices through ionic interaction. Various techniques were used to show the grafting of QDs on the surface of silica helix, and their optical properties were studied using absorption and emission spectroscopy. After grafting, in each case of ligands, different results were observed as follows: The TEM characterization shows that QDs are grafted on the surface of silica helices. In the case of AS-capped QDs, the helical morphology of silica helices after grafting is destroyed; therefore the further ananlysis was not possible. While, in the cases of QDs with three other ligands MPA, OLA and L-cys, dense and homogeneous grafting of the QDs were observed by TEM and the helical morphology was preserved after their grafting. The HRTEM images were taken on the MPA-QDs@silica helices and energy-dispersive x-ray (EDX) analysis was performed in STEM mode, confirming the QDs elements present on the silica surfaces. [...]

<p>The ß-carbolines norharman and harman structurally resemble the synthetic compound 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP) that is known for its ability to damage neuromelanin-containing dopaminergic neurons of the substantia nigra and thereby induce parkinsonism. MPTP is, however, not normally present in the environment whereas the ß-carbolines are present in cooked food and tobacco smoke. </p><p>In this thesis it was demonstrated that norharman and harman had affinity to melanin and were retained in neuromelanin-containing neurons of frogs up to 30 days post-injection (the longest survival time examined). It was also demonstrated that norharman induced neurodegeneration, activation of glia cells and motor impairment in mice. Furthermore, this compound induced ER stress and cell death in PC12 cells. An in vitro model of dopamine melanin-loaded PC12 cells was developed in order to study the effect of melanin on norharman-induced toxicity. In this model, melanin seemed to attenuate toxicity induced by low concentrations of norharman. After exposure to the highest concentration of norharman, melanin clusters were disaggregated and there was an increased expression of stress proteins and caspases-3, known to be involved in apoptosis.</p><p>The polycyclic aromatic hydrocarbon, 7,12-dimethylbenz[<i>a</i>]anthracene was demonstrated to have a CYP1A1-dependent localization in endothelial cells in the choroid plexus, in the veins in the leptomeninges and in the cerebral veins of mice pre-treated with CYP1-inducers. </p><p>These results demonstrate that the distribution of environmental compounds could be influenced by the presence of neuromelanin and expression of CYP enzymes in the brain and that norharman may induce neurotoxic effects in vivo and in vitro.</p>

The ß-carbolines norharman and harman structurally resemble the synthetic compound 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP) that is known for its ability to damage neuromelanin-containing dopaminergic neurons of the substantia nigra and thereby induce parkinsonism. MPTP is, however, not normally present in the environment whereas the ß-carbolines are present in cooked food and tobacco smoke. In this thesis it was demonstrated that norharman and harman had affinity to melanin and were retained in neuromelanin-containing neurons of frogs up to 30 days post-injection (the longest survival time examined). It was also demonstrated that norharman induced neurodegeneration, activation of glia cells and motor impairment in mice. Furthermore, this compound induced ER stress and cell death in PC12 cells. An in vitro model of dopamine melanin-loaded PC12 cells was developed in order to study the effect of melanin on norharman-induced toxicity. In this model, melanin seemed to attenuate toxicity induced by low concentrations of norharman. After exposure to the highest concentration of norharman, melanin clusters were disaggregated and there was an increased expression of stress proteins and caspases-3, known to be involved in apoptosis. The polycyclic aromatic hydrocarbon, 7,12-dimethylbenz[a]anthracene was demonstrated to have a CYP1A1-dependent localization in endothelial cells in the choroid plexus, in the veins in the leptomeninges and in the cerebral veins of mice pre-treated with CYP1-inducers. These results demonstrate that the distribution of environmental compounds could be influenced by the presence of neuromelanin and expression of CYP enzymes in the brain and that norharman may induce neurotoxic effects in vivo and in vitro.

In this work, a new method for mass determination of single low-charged particles in the sub-picogram regime is developed. It opens applications to chemical physics and surface science via determination of growth rates. The method combines the well-known electrodynamic quadrupole ion trap in a UHV-chamber and fourier transformation of scattered light. The achieved mass resolution of down to $10^{-4}$ at 100 fg mass on a time scale of ten seconds allows a resolution of a few percent of the mass of an adsorbed monolayer and to determine growth rates down to one molecule per second on a time scale of one day. The observation of temperature dependent sticking coefficients results in the measures of the energy of an adsorption barrier. Observation of discrete steps in the rate gives information about the density of molecules in an ordered layer. Temperature dependent desorption data gives the binding energy. The dependence of these observables on the controllable curvature and charge of the substrate's surface is measurable. The first part of this dissertation consists of a description of the common theory of the quadrupole ion trap with the completion of not widely known, newly introduced, contributions to the trapping potential. These contributions lead to systematic shifts in the mass determination. In particular the influence of the inhomogenity of the electrical field, that is used for compensating the gravitational force, is investigated analytically and corroborated experimentally. It is assumed, that the particle's finite size effects in a further shift. In the experimental part initial demonstrative measurements are presented: the time-resolved adsorption of fullerene, anthracene and NO on silica spheres with 500nm diameter has been measured at room temperature. In addition the secondary electron yield of in-situ prepared particles during irradiation with monoenergetic electrons has been determined by analyzing the distribution of change of the number of elementary charges by single events of charging.