Ziel dieser Arbeit war die Entwicklung neuer Methoden in der Rasterkraftmikroskopie, um die Qualität und Interpretierbarkeit von Oberflächenabbildungen auf der Nanometerskala, vor allem jener sehr weicher Proben, entscheidend zu verbessern. Der für polymere und biologische Materialien standardmäßig verwendete intermittierende Kontaktmodus führt auf weichen Oberflächen zu verfälschten Abbildungen der Topographie und der mechanischen Eigenschaften. In dieser Arbeit wurden Techniken entwickelt, die einerseits zerstörungsfreie, tiefenaufgelöste Rasterkraftmikroskopie und andererseits Einzelmessungen mit variabler Dämpfung im intermittierenden Kontaktmodus ermöglichen. Die laterale Auflösung beider Methoden liegt dabei im Rahmen herkömmlicher Techniken (< 10 nm). Die Tiefenauflösung konnte im Vergleich zu anderen Methoden um eine Größenordnung auf unter 1 nm verbessert werden. Die neuen Methoden wurden auf einer breiten Palette polymerer Materialien angewandt. Die räumliche Struktur oberflächennaher Bereiche eines Blockcopolymerfilms konnte im Vergleich zu herkömmlichen Methoden deutlich genauer abgebildet werden. Gleiches wurde auf elastomerem Polypropylen erreicht. Es konnten weiche, amorphe Deckschichten auf teilkristallinen Polymeren nachgewiesen und vermessen werden, was in der organischen Elektronik eine wichtige Rolle spielen kann. Die innere Struktur selbstangeordneter Nanodrähte aus Oligothiophen-Aggregaten konnte aufgelöst werden und es wurde die Selbstanordnung von Kollagenfibrillen im gequollenen Zustand beobachtet.

The most commonly known macro scale probing devices are simply comprised of metallic leads used for measuring electrical signals. On the other hand, micromachined probing devices are realized using microfabrication techniques and are capable of providing very fine, micro/nano scale interaction with matter; along with a broad range of applications made possible by incorporating MEMS sensing and actuation techniques. Micromachined probes consist of a well-defined tip structure that determines the interaction space, and a transduction mechanism that could be used for sensing a change, imparting external stimuli or manipulating matter. Several micromachined probes intended for biological and nanotechnology applications were fabricated, characterized and tested. Probes were developed under two major categories. The first category consists of Micro Electromagnetic Probes for biological applications such as single cell, particle, droplet manipulation and neuron stimulation applications; whereas the second category targets novel Scanning Probe topologies suitable for direct nanopatterning, variable resolution scanning probe/dip-pen nanolithography, and biomechanics applications. The functionality and versatility of micromachined probes for a broad range of micro and nanotechnology applications is successfully demonstrated throughout the five different probes/applications that were studied. It is believed that, the unique advantages of precise positioning capability, confinement of interaction as determined by the probe tip geometry, and special sensor/actuator mechanisms incorporated through MEMS technologies will render micromachined probes as indispensable tools for microsystems and nanotechnology studies.

Miniaturization has become a driving force in different areas of technology including microelectronics, sensoric- and bio-technologies and in fundamental science. Because of the well-known limitations of conventional lithographic methods, newly emerging bottom-up approach, utilizing self-assembly of various nanoobjects including single polymer molecules and carbon nanotubes constitutes a very promising alternative for fabrication of ultimately small devices. Carbon nanotubes are attractive materials for nanotechnology and hold much promise to revolutionize fundamental science in a investigation of phenomena, associated with the nanometer–sized objects.It was found in this work that grafted chains of poly(2-vinylpyridine) form a shell covering the carbon nanotubes that makes them dispersible in organic solvents and in acidic water (CNTs-g-P2VP).The positively charged poly(2-vinylpyridine) shell is responsible for the selective deposition of carbon nanotubes onto oppositely charged surfaces. It was established that the deposition CNTs-g-P2VP from aqueous dispersions at low pH is an effective method to prepare ultra-thin films with a tunable density of carbon nanotubes.It was shown that poly(2-vinylpyridine) grafted to carbon nanotubes is a universal support for the immobilization of various nanoclusters at the carbon nanotube's surface. Prussian Blue nanoparticles were selectively attached to the surface of CNTs-g-P2VP.Conducting polymer nanowires are another very promising kind of nanomaterials that could be also suitable for applications in nanodevices and nanosensors. In this work was developed a simple method to control the conformation and orientation of single adsorbed polyelectrolyte molecules by co-deposition with octylamine. A simple chemical route to conductive polypyrrole nanowires by the grafting of polypyrrole from molecules of polystyrensulfonic acid was developed. The dc conductivity of individual polypyrrole nanowires approaches the conductivity of polypyrole in bulk.The conductivity can be described using variable-range hopping model.

No description available.

No description available.

Organic semiconductors show promise to yield a novel class of bendable electronic devices, and much research efforts have focused on the optimization of these films for device performance. It is well known that the structure of organic films has a large influence over the electronic properties. In particular, the carrier mobility is often highly anisotropic, and domain boundaries have a detrimental effect on charge transport. Therefore the domain structure and lattice orientation are of particular interest. However, little is known about the domain structure of organic films, and techniques to study these properties have only begun to emerge in recent years. In this thesis, we apply two experimental techniques, Grazing-Incidence X-ray Diffraction (GIXD) and Lateral Force Microscopy (LFM), toward studying the lattice and domain structure of tetracene films grown on the silicon(001)-monohydride surface. We describe the necessary steps toward optimizing the sensitivity of these techniques to the domain structure. Results show that the crystalline tetracene films form a layered morphology in which the a-b plane lies parallel to the substrate surface. The film lattice structure is similar to bulk tetracene, and the lattice is confined to two orthogonal orientations, forming a partially-commensurate relationship with the substrate surface lattice along the film 'a' axis. LFM images reveal two types of polycrystalline domains. The first type ("major domains") are tens of microns in size, and are classified by their lattice orientation. They are subdivided into the second type ("sub-domains"), which range from 0.1 to 5um in size, and are argued to represent regions of uniform molecular tilt direction. The GIXD data show that the single-crystal domains which comprise these two larger domain types are anisotropic in size, being up to two times longer along the film 'b' axis than along 'a'. The single-crystal domains range from 0.05 to 0.2um in size, depending on lattice orientation and film thickness. The mathematical basis for these single-crystal domain size calculations is presented. The single-crystal domain sizes are thickness-dependent, and are two orders of magnitude smaller than a typical surface island observed in atomic-force microscopy (AFM) topographs. Substrate steps can also significantly influence the film structure by inducing boundaries in the single-crystal domains and sub-domains, but not in the major domains. This detailed knowledge of the domain structure of organic thin-films may assist in our understanding of the factors which affect charge transport in thin films, and may help to direct research efforts in optimizing the film structure for device performance. / Natural Sciences and Engineering Research Council (NSERC), Canadian Foundation for Innovation (CFI), Ontario Innovation Trust (OIT).

The group 2 late embryogenesis abundant (LEA) proteins, also known as the dehydrins, are intrinsically disordered proteins that are expressed in plants experiencing extreme environmental conditions such as drought or low temperature. In this work, we study the potential roles that dehydrins may have in stabilizing membranes and actin microfilaments during cold stress. We have cloned and expressed in E. coli two dehydrins from Thellungiella salsuginea, denoted TsDHN-1 (acidic) and TsDHN-2 (basic). These proteins were expressed as SUMO-fusion proteins for in vitro phosphorylation by casein kinase II (CKII), and for structural analysis by CD and Fourier transform infrared (FTIR) spectroscopy. We show using transmission-FTIR spectroscopy that ordered secondary structure is induced and stabilized in these proteins by association with large unilamellar vesicles emulating the lipid compositions of plant plasma and organellar membranes. The increase in secondary structure by membrane association is further facilitated by the presence of Zn2+. Lipid composition and temperature have synergistic effects on the secondary structure. Our single molecule force spectroscopy studies also suggest tertiary folding of both TsDHN-1 and TsDHN-2 induced by association with lipids. From Langmuir-Blodgett monolayer compression studies, and from topographic studies using atomic force microscopy at variable temperature, we conclude that TsDHN-1 stabilizes the membrane at lower temperatures. Finally, we show that the conformations of TsDHN-1 and TsDHN-2 are affected by pH, interactions with cations and membranes, and phosphorylation. Actin assembly by these dehydrins was assessed by sedimentation assays, and viewed by transmission electron and atomic force microscopy. Phosphorylation enabled both dehydrins to polymerize actin filaments, a phenomenon that may occur in the cytosols of plant cells undergoing environmental stress. These results support the hypothesis that dehydrins stabilize plant organellar membranes and/or the cytoskeleton in conditions of stress, and further that phosphorylation may be an important feature of this stabilization. / NSERC

Les maladies ostéoarticulaires représentent environ 10% de l'ensemble des pathologies identifiées en France chaque année. Pour l'instant aucun traitement permettant la réparation du tissu cartilagineux n'est vraiment disponible, hormis la pose d'un implant articulaire. Mais, malgré de nombreux efforts pour développer de nouveaux matériaux pour les implants articulaires leur durée de vie in vivo s'avère souvent très décevante par rapport aux extrapolations faites à partir de simulations ex-vivo. Les discordances entre les durées de vie in vivo et ex vivo sont principalement imputées aux conditions d'essais ex vivo insuffisamment réalistes vis-à-vis des propriétés physico-chimiques des lubrifiants biologiques. Dans ce contexte, ce travail vise à agir sur la réactivité physicochimique des surfaces frottantes des implants articulaires en UHMWPE afin de maîtriser l'accrochage des molécules lubrifiantes de type phospholipidique et ainsi d'augmenter leurs performances tribologiques. Les résultats montre que l'activation physichochimique des surfaces de UHMWPE par des couche de MPC peut diminuer l'usure des surfaces polymères d'implant mais cela nécessite un contrôle de la qualité de la couche MPC greffée (densité surfacique, épaisseur, accrochage chimique, adsorption physico-chimique) afin de garantir une bonne tenue mécanique et tribologique. D'autre part il a été montré que la présence de lubrifiant biologique (substitut du fluide synovial à base de liposomes) réduit l'usure des surfaces de UHWPE même si la couche de MPC est peu dense et peu épaisse

(ULSI) causes an increase of the resistance of the wiring system by increased scattering of electrons at side walls and grain boundaries in the state of the art Cu technology, which increases the RC delay of the interconnect system and thus degrades the performance of the device. The outstanding properties of carbon nanotubes (CNT) such as a large mean free path, a high thermal conductance and a large resistance against electromigration make them an ideal candidate to replace Cu in future feature nodes. The present thesis contributes to the preparation and properties of CNT based vertical interconnections (vias). In addition, all processes applied during the fabrication are compatible to ULSI and an interface between CNT based vias and a Cu metallization is studied. The methodology for the evaluation of CNT based vias is improved; it is highlighted that by measuring the resistance of one multiwall CNT and taking into account the CNT density, the performance of the CNT based vias can be predicted accurately. This provides the means for a systematic evaluation of different integration procedures and materials. The lowest contact resistance is obtained for carbide forming metals, as long as oxidation during the integration is avoided. Even though metal-nitrides exhibit an enhanced contact resistance, they are recommended to be used at the bottom metallization in order to minimize the oxidation of the metal-CNT contact during subsequent processing steps. Overall a ranking for the materials from the lowest to the highest contact resistance is obtained: Ta < Ti < TaN < TiN « TiO2 « Ta2O5 Furthermore the impact of post CNT growth procedures as chemical mechanical planarization, HF treatment and annealing procedures after the CNT based via fabrication are evaluated. The conductance of the incorporated CNTs and the applicable electrical transport regime relative to the CNT quality and the CNT length is discussed. In addition, a strong correlation between the temperature coefficient of resistance and the initial resistance of the CNT based vias at room temperature has been observed. / Die kontinuierliche Miniaturisierung der charakteristischen Abmessungen in hochintegrierten Schaltungen (ULSI) verursacht einen Anstieg des Widerstandes im Zuleitungssystem aufgrund der erhöhten Streuung von Elektronen an Seitenwänden und Korngrenzen in der Cu-Technologie, wodurch die Verzögerungszeit des Zuleitungssystems ansteigt. Die herausragenden Eigenschaften von Kohlenstoffnanoröhren (CNT), wie eine große mittlere freie Weglänge, hohe thermische Leitfähigkeit und eine starke Resistenz gegenüber Elektromigration machen diese zu einem idealen Kandidaten, um Cu in zukünftigen Technologiegenerationen zu ersetzen. Die vorliegende Arbeit beschreibt die Herstellung und daraus resultierenden Eigenschaften von Zwischenebenenkontakten (Vias) basierend auf CNTs. Alle verwendeten Prozessierungsschritte sind kompatibel mit der Herstellung von hochintegrierten Schaltkreisen und eine Schnittstelle zwischen den CNT Vias und einer Cu-Metallisierung ist vorhanden. Insbesondere das Verfahren zur Evaluierung von CNT Vias wurde durch den Einsatz verschiedener Methoden verbessert. Insbesondere soll hervorgehoben werden, dass durch die Messung des Widerstandes eines einzelnen CNTs, bei bekannter CNT Dichte, der Via Widerstand sehr genau vorausgesagt werden kann. Dies ermöglicht eine systematische Untersuchung des Einflusses der verschiedenen Prozessschritte und der darin verwendeten Materialien auf den Via Widerstand. Der niedrigste Kontaktwiderstand wird für Karbidformierende Metalle erreicht, solange Oxidationsprozesse ausgeschlossen werden können. Obwohl Metallnitride einen höheren Kontaktwiderstand aufweisen, sind diese für die Unterseitenmetallisierung zu empfehlen, da dadurch die Oxidation der leitfähigen Schicht minimiert wird. Insgesamt kann eine Reihenfolge beginnend mit dem niedrigsten zum höchsten Kontaktwiderstand aufgestellt werden: Ta < Ti < TaN < TiN « TiO2 « Ta2O5 Desweiteren wurde der Einfluss von Verfahren nach dem CNTWachstum wie die chemischmechanische Planarisierung, eine HF Behandlung und einer Temperaturbehandlung evaluiert, sowie deren Einfluss auf die elektrischen Parameter des Vias untersucht. Die Leitfähigkeit der integrierten CNTs und die daraus resultierenden elektrischen Transporteigenschaften in Abhängigkeit der CNT Qualität und Länge werden besprochen. Ebenso wird die starke Korrelation zwischen dem Temperaturkoeffizienten des elektrischen Widerstandes und des Ausgangswiderstandes der CNT basierten Vias bei Raumtemperatur diskutiert.

Ferroic materials play an increasingly important role in novel (nano-)electronic applications. Recently, research on domain walls (DWs) received a big boost by the discovery of DW conductivity in bismuth ferrite (BiFeO3 ) and lead zirconate titanate (Pb(Zrx Ti1−x )O3) ferroic thin films. These achievements open a realistic and unique perspective to reproducibly engineer conductive paths and nanocontacts of sub-nanometer dimensions into wide-bandgap materials. The possibility to control and induce conductive DWs in insulating templates is a key step towards future innovative nanoelectronic devices [1]. This work focuses on the investigation of the charge transport along conductive DWs in ferroelectric single crystals. In the first part, the photo-induced electronic DC and AC charge transport along such DWs in lithium niobate (LNO) single crystals is examined. The DC conductivity of the bulk and DWs is investigated locally using piezoresponse force microscopy (PFM) and conductive AFM (c-AFM). It is shown that super-bandgap illumination (λ ≤ 310 nm) in combination with (partially) charged 180° DWs increases the DC conductivity of the DWs up to three orders of magnitude compared to the bulk. The DW conductivity is proportional to the charge of the DW given by its inclination angle α with respect to the polar axis. The latter can be increased by doping the crystal with magnesium (0 to 7 mol %) or reduced by sample annealing. The AC conductivity is investigated locally utilizing nanoimpedance microscopy (NIM) and macroscopic impedance measurements. Again, super-bandgap illumination increases the AC conductivity of the DWs. Frequency-dependent measurements are performed to determine an equivalent circuit describing the domains and DWs in a model system. The mixed conduction model for hopping transport in LNO is used to analyze the frequency-dependent complex permittivity. Both, the AC and DC results are then used to establish a model describing the transport along the conductive DW through the insulating domain matrix material. In the last part, the knowledge obtained for LNO is applied to study DWs in lithium tantalate (LTO), barium titanate (BTO) and barium calcium titanate (BCT) single crystals. Under super-bandgap illumination, conductive DWs are found in LTO and BCT as well, whereas a domain-specific conductivity is observed in BTO.