This Degree Project has been done at Växjö University, department of bioenergy technology and discusses the released thermal power in wood pellets. The purpose of the project is to investigate if two new types of wood biofuels (pellets) are more or less reactive than the pellets previously investigated at Växjö University. To measure the released thermal power, an isothermal calorimeter with eight channels has been used. To see how the microbial activity is influenced, the pellets have been stored under various conditions with focus on temperature and metal.

I takt med ökande intresse för uttag av grot så ökar också intresset för återföring av aska tillbaka till skogen. I rapporten utreds hur mycket återföringsbar aska som produceras av förbränningsanläggningar. Arbetet begränsas genom att endast förbränningsanläggningar med större kapacitet än 10 GWh träbränsle per år tas med . Dessutom sker en avgränsning geografiskt till att endast ta med anläggningar placerade söder om en tänkt linje mellan Karlstad och Stockholm. Datainsamlingen för förbränningsanläggningarnas askmängder har gjorts både med telefonintervju och enkätundersökning. Totalt har 107 förbränningsanläggningar tillfrågat. Askan från anläggningarna används till askåterföring, sluttäckning av deponi, deponi och bärlager till vägar. Kostnaderna mellan de olika användningsområdena varierar stort, kostnaderna att sluttäcka en deponi är hälften mot att spridas i skog. En stor del av förbränningsanläggningarna är överens att kostnaderna för askåterföring till skogen är för dyr. Fler anläggningar kan tänka sig att återföra askan till skogen men anger kostnaderna som orsak till val av andra alternativa användningsområden. / In line with increased interest for using of branches and tops, increases also the interest for retransfer of ash back to the forest. In the report investigated how much ash from the incineration plants that can retransfers back to the forest. The work is limited through that only incineration plants with bigger capacity than 10 GWh wood fuel a year is taken with. Moreover, a demarcation happens geographic to only to take with plants placed south about an intended line between Karlstad and Stockholm. The data collection for the incineration plants ash quantities have been done both with telephone interview and questionnaire survey. Total has 107 incineration plants consulted. The ash from the plants is used to ash retransfer, end coverage off landfill, landfill and berry stocks to roads. The costs between the different use areas vary bigly, the costs to end to cover landfill is the half against being disseminated in forest. A big part of the incineration plants is agreed that the costs for ash retransfer to the forest is for costly. More plants can intend itself to bring back the ash to the forest but because of the price the plants choice other alternative use areas.

The growing demand for biofuels in the European Union is expected to have a significant impact on rural environments in sub-Saharan Africa. In the wake of Directive 2009/28/EC, Ghana experienced a rapid rise in foreign land acquisitions and direct investments to its agricultural sector. The potential implications of this development are multi-fold: While proponents of the EU biofuels policy stress the potential for agricultural development and improved energy security in the region, its opponents criticise the lack of binding rules and regulations concerning social sustainability and indirect land use changes. As a means of assessing the validity of these opposing views, this research paper provides an analysis of the directive's impact on Ghanaian energy security and agricultural development in the country. The analysis is based on key informant interviews and a comprehensive literature reviews. It is concluded that the potential of host countries to generate benefits from the cultivation of energy crops largely rests on their institutional framework. In Ghana, foreign biofuel investments appear to have at least partially resulted in negative socio-economic impacts on local rural communities. Formal and informal land rights, as well as land acquisition procedures present significant obstacles. Civil action and the proposal for a new national biofuels policy indicate, however, that the country could eventually emerge as a beneficiary of the global trend towards biofuels.

Six ã-Al2O3 supported metallic nitride and carbide catalysts were chosen for a scouting test for the production of a diesel fuel cetane enhancer from canola oil. The six catalysts chosen for study were ã-Al2O3 supported molybdenum (Mo) carbide and nitride, tungsten (W) carbide and nitride, and vanadium (V) nitride and carbide. All six catalysts were prepared by the impregnation method and characterized using various techniques. The six catalysts were screened for their affinity for oxygen removal, fatty acid conversion, alkane/olefin selectivity, hydrogen consumption, and gas-by product production from oleic acid. The scouting test was carried out at a reaction temperature of 390°C, a LHSV of 0.46 hr-1, and elevated hydrogen partial pressures of greater than 7000 kPa, in a laboratory microreactor in an upflow configuration. The scouting test revealed that the two molybdenum catalysts performed the best with oxygen removal near 100% and alkane/olefin content of greater than 30%. <p>Next, the supported molybdenum carbide and nitride catalysts were compared against one another over a wider range of operating conditions. A temperature range of 380 390°C, a LHSV range of 0.64 1.28 hr-1, and a hydrogen partial pressure of 7100 kPa were used. Both catalysts had the same metal loading of 7.4 wt% molybdenum. The two catalysts were compared on the basis of oxygen removal, alkane/olefin selectivity, diesel fuel selectivity, and hydrogen consumption, while using both triolein and canola oil as the feed. It was found that the supported molybdenum nitride was the superior choice for this process, specifically when using the more complex canola oil feed. The supported molybdenum nitride catalyst delivered oxygen removal of greater than 85%, alkane/olefin selectivity of greater than 20%, and diesel fuel selectivity of greater than 40%, for all conditions studied. <p>Finally, a preliminary catalyst and process optimization was carried out on the chosen ã-Al2O3 supported molybdenum nitride catalyst. The catalyst optimization consisted of varying the metal loading of the catalyst from 7.4 wt% to 22.7 wt%. The catalysts were examined over a temperature range of 390 410°C, a LHSV range of 0.9 1.2 hr-1, and a hydrogen partial pressure of 8300 kPa, with canola oil as the chosen feed. It was found that the increase in molybdenum loading on the catalyst delivered an average increase in the alkane/olefin selectivity of 43.2% and an average increase in the diesel fuel selectivity of 5.3 %. The process optimization studied a temperature range of 390 410°C, a LHSV range of 0.6 1.2 hr-1, and a hydrogen partial pressure range of 7800 - 8900 kPa, with canola oil as the chosen feed. Within the limits of the design, it was found that the optimum operating conditions were 395°C, 1.05 hr-1, and 8270 kPa. At these conditions the predicted yields of alkane/olefin products and diesel fuel are 47.3 and 50.5 g/100g liquid fed, respectively.

No description available.

Increase demand for biofuel in the world as the means to mitigate global climate change, energy option and reduced fule import expenses have attracted many companies to acquire land in developing countries like Tanzania. To invest on biofuel in Africa is believed to be a means for generating incomes from expert, to employ rural people, enhance infrastructure development.However, in Africa biofuels policy is still weak. This study mainly focuses on people`s expectation during and after the investment.Issue of compensation procedure and promises seems to be a big problem; something brought tension of being cheated among local communities. Futhermore, community involvement and integration of jatropha with smallholder´s agriculture is also low.

Microalgae produce large quantities of lipids that can be used for biofuel feedstock. The goal of this project was to determine the effect of several engineering and management parameters on the productivity of microalgae cultivated in large, outdoor facilities. The specific objectives were focused on the effects of inoculation ratios; the effects of light, temperature, and culture depth on growth; and the minimum circulation velocity necessary to maintain growth and minimize settling in open ponds. Microalgae must first be cultured in smaller quantities before the raceway is inoculated for optimized growth. Concentration ratios are defined as the ratio of the volume of microalgae inoculum to the volume of new growth media. The microalgae species used was Nannochloris oculata (UTEX #LB 1998). Inoculation ratios studied varied from 1:1 to 1:32 and were grown in 500 mL Erlenmeyer flasks. The study found that 1:16 and 1:32 were too dilute, while the 1:8 concentration had the largest growth rate. Determination of the effects of temperature, light intensity, and cultivation depth is critical to maintaining healthy cultures. Excess light intensity can result in photoinhibition and temperatures above the maximum growing tolerance can have detrimental effects. These factors can affect growth and evidence suggests an interaction that exacerbates these effects. In an outdoor culture there are few practical control variables other than pond depth. As cultivation depth increases, the algae undergo "selfshading" and the increased cultivation volume hinders temperature changes. Scaled raceway ponds were maintained at 10.16 cm (4 inch) and 13.97 cm (5.5 inch) depths. The species used was Nannochloris oculata and it was found to grow best at 785 micromol m⁻² s⁻¹m^-2 s^-1, 20°C, and 10.16 cm. Diatoms are attractive because of high growth rates, faster lipid production, and greater cell density. The latter promotes rapid settling once mixing has stopped. Because of the silica cell wall composition, diatoms are believed to be more susceptible to shear forces which can result in lysis. Determining the natural settling rate to the minimum channel velocity relationship in cultivation ponds was the objective. No flocculants/coagulants were added which created a case of "natural" settling. Four pennate Nitzschia sp. and one centric diatom were tested in a jar tester. There was no significant difference in settling times between the species. The mean settling time was 4.55 cm min⁻¹ and the minimum channel velocity was determined to be 10.12 cm min⁻¹.

<p>This Degree Project has been done at Växjö University, department of bioenergy technology and discusses the released thermal power in wood pellets. The purpose of the project is to investigate if two new types of wood biofuels (pellets) are more or less reactive than the pellets previously investigated at Växjö University. To measure the released thermal power, an isothermal calorimeter with eight channels has been used. To see how the microbial activity is influenced, the pellets have been stored under various conditions with focus on temperature and metal.</p>

Efforts to reduce the United States’ dependence on foreign petroleum encourage the production of fuels from bioenergy crops. Recent energy mandates have therefore “opened doors” for alternative feedstock sources for ethanol production. Switchgrass is a candidate feedstock. Under the University of Tennessee’s Biofuels Initiative, the University of Tennessee, partnering with DuPont-Danisco Cellulosic Ethanol LLC, contracted for the production of switchgrass with local farmers to guarantee biomass feedstock supply for an ethanol conversion research facility. This study used methods borrowed from the social psychology literature in combination with economic theory to analyze factors influencing switchgrass farmers’ intentions to continue growing switchgrass after contracts with the granting agent expired. Understanding what motivates producers to make long term commitments to switchgrass production as an energy crop may be important information for private investors who will rely on a fixed supply of switchgrass.A probit model was used to determine the factors affecting producers’ intentions to continue producing switchgrass after their contract expires. Results suggest that community perceptions about the production of switchgrass as a dedicated energy crop may have an important impact on farmers’ intentions to make a long-term commitment to produce switchgrass. Therefore, educating and involving community and extension personnel may have a positive impact on farmers’ decisions to make long-term commitments to grow switchgrass as a dedicated energy crop.

Diss. (sammanfattning) Umeå : Sveriges lantbruksuniversitet, 2009. / Härtill 4 uppsatser.