In this thesis, a novel electrochemical array is reported. The array consists of two planar halves, each having four carbon screen-printed band electrodes (SPEs), orthogonally facing each other and separated by a spacer to yield 16 two-electrode electrochemical cells with 1 mm² working electrode areas. The 16 counter electrodes were converted to Ag/AgCl by electrodeposition and anodization. These electrodes were stable for at least 30 days with potentials under the current densities used in our experiments. The 16 working electrodes were modified by Au electrodeposition, and were examined by scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS). <br /><br /> Immobilization strategies for biomolecules are of paramount importance for successful fabrication of biosensors. This thesis reports a new immobilization method that is based on patterned deposition of alkyl thiosulfates (Bunte salts). Monolayers were formed through electrochemical oxidation of Bunte salts at Au-modified electrodes. Single-component and mixed monolayers were investigated, where the mixed monolayers involved one component with a terminal carboxylic acid functional group to allow immobilization of biomolecules. <br /><br /> Applications of the newly developed immobilization method to an enzyme-based biosensor and an immunosensor were investigated. Glucose and biotin were chosen as model analytes, respectively. Glucose oxidase (GOx) and avidin were covalently immobilized onto the mixed-monolayer-modified electrodes through the carboxylic acid groups. Under the optimized conditions for the fabrication and operation of the biosensors, the new electrochemical array showed linearity up to 10 mM glucose with a sensitivity of 4. 7 nA mM^-1 and a detection limit of 0. 8 mM (S/N=3), and linearity up to 12. 8 µM biotin with a detection limit of 0. 08 µM (S/N=3).

<p>Biosensors incorporating proteins as molecular recognition elements for analytes are used in clinical diagnostics, as biological research tools, and to detect chemical threats and pollutants. This work describes the application of protein engineering techniques to address three aspects in the design of protein-based biosensors; the transduction of binding into an observable, the manipulation of affinities, and the diversification of specificities. The periplasmic glucose-binding protein from the hyperthermophile Thermotoga maritima (tmGBP) was fused with green fluorescent protein variants to construct a fluorescent ratiometric sensor that is sufficiently robust to detect glucose up to 67°C. Ligand-binding affinities of tmGBP were changed by altering a C-terminal helical domain that tunes ligand binding affinity through conformational coupling effects. This method was extended to the Escherichia coli arabinose-binding protein. Computational design techniques were used to diversify the specificity of the E. coli maltose-binding protein (ecMBP) to bind ibuprofen, a non-steroidal antiinflammatory drug. These designs ranged in affinity from 0.24 to 0.8 mM and function as reagentless fluorescent sensors. The ligand affinities of ecMBP are tuned by complex interactions that control conformational coupling. These experiments demonstrate that long-range conformational effects as well as molecular recognition interactions need to be considered in the design of high-affinity receptors.</p> / Dissertation

Electron-excited surface plasmon resonance (eSPR) is investigated for potential use in biosensors. Optical SPR sensors are commercially available at present and these sensors are extremely sensitive, but have the tendency to be relatively large, expensive, and ignore the potentials of microelectronic technology. By employing the use of various microelectronic and nanotechnology principles, the goal is to eventually design a device that exploits the eSPR phenomenon in order to make a sensor which is siginificantly smaller in size, more robust, and cheaper in cost.

The explosive growth of the biosensors and health-related wearable monitoring devices has accentuated the need for miniaturized, high-efficiency conformal bio-modules that can operate over a wide range of frequencies, while they can be integrated in wearable and lightweight configurations. One of the major issue for the implementation of Wireless Body Area Networks (WBAN) is the very limited range of commonly used metal antennas. Due to the high dielectric constant between the metal antenna material (as well as the metal-based circuitry) and the mostly "ionized-water" human body parts, the near-field gets significantly disturbed, while local reflections due to the dielectric mismatch further shorten the operation range. Even wearable bracelet-like sensing devices have a very low range due to this reason. Thus, there are two major aspects that are going to be addressed in this Thesis: enhanced-range wearable antennas for wireless biosensors and compact "rugged-polarization" wireless sensor readers.

Oligo(ethylene glycol) groups have been used as substituents in poly(p-phenyleneethynylene)s (PPEs) to provide solubility, and to boost quantum yield. Properties such as water-solubility and increased quantum yield in aqueous solution make these conjugated systems promising for biosensory applications. In this thesis, a PPE containing a branched ethylene glycol side chain is synthesized as part of a polymer array for glycan biosensing. I also report that the same side chain can be put to use in a red-emissive polymer to lend water solubility. Another monomeric unit, containing ethylene glycol chains, is incorporated into a PPE to create an ampiphilic polymer. The versatility of these polymers allows them to be used for a variety of purposes, some of which will be described herein.

Thesis (M.S.)--West Virginia University, 1999. / Title from document title page. Document formatted into pages; contains x, 126 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. [72]-75).

Thesis (M.S.)--West Virginia University, 2000. / Title from document title page. Document formatted into pages; contains viii, 94 p. : ill. (some col.). Vita. Includes abstract. Includes bibliographical references (p. 88-89).

Thesis (Ph. D. in engineering science)--Washington State University. / Includes bibliographical references.

Affinity-based biosensors, or in short biosensors, are extremely powerful and versatile analytical tools which are used for the detection of a wide variety of bio-molecules. In recent times, there has been a need for developing low-cost and portable affinity-based biosensor platforms. Such systems need to have a high density of detection sites (i.e biosensing elements) in order to simultaneously detect multiple analytes in a single sample. This has led to the creation of integrated biosensors, which make use of integrated circuits (ICs) for bio-molecular detection. In such systems, it has been demonstrated that by taking advantage of the capabilities of semiconductor and very large scale integrated (VLSI) circuit fabrication processes, it is possible to build compact miniaturized biosensors, which can be used in wide variety of applications such as in molecular diagnostics and for environmental monitoring. Among the various detection modalities for biosensors, Electrochemical Impedance Spectroscopy (EIS) permits real-time detection and has label-free detection capabilities. EIS is fully electronic in nature. Hence, it can be implemented using standard IC technologies. The versatility and ease of integration of EIS makes it a promising candidate for developing integrated biosensor platforms. In this thesis, we first examine the underlying principles of EIS method of biosensing. By analyzing an immunosensor assay as an example, we show that EIS based biosensing is a highly sensitive detection method, which can be used for the detection of a wide variety of analytes. Since EIS relies on small impedance changes in order to perform detection, it requires highly accurate models for the electrode-electrolyte systems. Hence, we also introduce a compact modeling technique for the distributed electrode-electrolyte systems with non-uniform electric fields, which is capable of modelling noise and other non-idealities in EIS. In the second part of this thesis, we describe the design and implementation of an integrated EIS biosensor array, built using a standard complementary metal-oxide-semiconductor (CMOS) process. The chip is capable of measuring admittance values as small as 10nS and has a wide dynamic range (90dB) over a wide range of frequencies (10Hz-50MHz). We also report the results obtained from the DNA and protein detection experiments performed using this chip. / text

Not available / text