Betong är vårt vanligaste byggmaterial men cement står globalt sett för 5 % av CO2-emissionerna. Med detta som bakgrund så har CBI Betonginstitutet anordnat en tävling, där målet är att nå den högsta tryckhållfasthet i en resurssnål betong, med enbart 200 kg cement per m3. Syftet med denna rapport är att utvärdera tävlingen, vilket har utförts genom en omfattande litteraturstudie.  En första analys av de olika betongrecepten medförde att olika grupperingar kunde urskiljas. Ur dessa fanns det tre stycken vars resultat var väldigt bra.   Concrete Innovation Centre, som med ett lågt vct, stora mängder granulerad masugnsslagg (81 %) och lite silikastoft (5 %), uppnådde en tryckhållfasthet på 80 MPa vid 28 dygn och 95 MPa vid 56 dygn.   CBI Stockholm, som genom användandet av ulltrafint filler och silikastoft (4,8 %), uppnådde en tryckhållfasthet på 84 MPa vid 28 dygn och 98 MPa vid 56 dygn.   Thomas Concrete Group som genom att ersätta cementet med en medelmåttig mängd granulerad masugnsslagg (54 %), liten mängd flygaska (9 %), kalkfiller och silikastoft (5 %), uppnådde en tryckhållfasthet på 94 MPa vid 28 dygn och 98 MPa vid 56 dygn.  Det finns således tre recept som vidare studier kan vara rättfärdigade på, de tre ovan nämnda. Det bör tilläggas att en imponerande tryckhållfasthet på nästan 100 MPa, kan uppnås i en betong med enbart 200 kg cement per m3. / Concrete is the most frequently used construction material, but cement globally stands for 5 % of the world’s CO2 emissions. With this as a background CBI Betonginstitutet has arranged a competition, where the goal is to reach the highest compressive strength in a resource economic concrete, with only 200 kg cement per m3. The purpose of this report is to evaluate the competition, which has been done via a substantial literature study.  A first analysis of the different concrete recipes resulted in that different groups could be identified. From these there were three recipes whose result was very good.   Concrete Innovation Centre, which with a low w/c, a high amount of ground granulated blast furnace slag (81 %) and little silica fume (5 %), reached a compressive strength of 80 MPa at 28 days and 95 MPa at 56 days.   CBI Stockholm, which by the usage of ultrafine filler and silica fume (4,8 %), reached a compressive strength of 84 MPa at 28 days and 98 MPa at 56 days.   Thomas Concrete Group, which by replacing the cement with a moderate amount of ground granulated blast furnace slag (54 %), a small amount of fly ash (9 %), lime filler and silica fume (5 %), reached a compressive strength of 94 MPa at 28 days and 98 MPa at 56 days.  The conclusion is that there are three recipes that further studies are justified to continue with, the three mentioned above. It should be added that an impressive concrete compressive strength of almost 100 MPa, can be reach with the use of only 200 kg cement per m3.

Stockholm Vatten has decided to close down the Bromma waste water treatment plantand manage the waste water from Bromma together with the waste water from the formerEolshällsverket to Henriksdal’s waste water treatment plant. Henriksdals wastewater treatment plant will be expanded for higher purification requirements and loads,estimated to be finished until 2040. This entails extensive renovations and additionsto the existing treatment plant in and on Henriksdalsberget, as well as a major expansionof the Sickla plant.The purpose of the study is to investigate an environmentally friendly alternative tothe standard concrete that will be used for the expansion of the Sickla plant. The largestenvironmental villain in concrete is the cement. The aim of this study has beento replace the cement with environmentally friendly additives in the largest possibleamount, thus reducing the negative impact of the cement on the environment.In the present study, a review was made of obtained data with exposure classes, then aliterature study was performed to gain knowledge in the area. With help from experts,two fictitious recipes for each exposure class have been calculated for the standardconcrete and the green concrete. In this way, a careful comparison between the concretetypes was made of the cement’s impact on global warming. Thereafter, a study wascarried out on existing EPDs, which were incorporated into the One Click LCA (2015)software. An LCA in the mentioned software was carried out, which enabled data to becompiled and a comparison of the climate impact between the four different fictitiousrecipes has been done.Compiled and compared data from LCA and analysis of EPDs show that 70% of thestructure with exposure class XD2 gets a 47% reduction in global warming when usinggreen concrete instead of standard concrete. Furthermore, the results show that theremaining 30% of the structure with exposure class XF3/XC4 gets a 20% reductionwhen using green concrete instead of standard concrete. The total reduction in globalwarming when using green concrete instead of standard concrete for the expansion ofSickla treatment plant was calculated to be 40%. / Stockholm Vatten har beslutat att lägga ned Bromma reningsverk och leda avloppsvattnetfrån Bromma tillsammans med avloppsvattnet från det forna Eolshällsverkettill Henriksdals reningsverk. Henriksdals reningsverk ska byggas ut för högre reningskravoch belastningar beräknade till år 2040. Detta medför omfattande om- och tillbyggnationeri det befintliga reningsverket i och på Henriksdalsberget samt en storutbyggnad av Sicklaanläggningen.Syftet med detta arbete är att undersöka ett miljövänligare alternativ till standardbetongensom ska användas vid utbyggnaden av Sicklaanläggningen. Då den främsta”miljöboven” i betongen är cementet har målet med denna studie varit att ersätta cementetmed miljövänliga tillsatsmaterial i största möjliga mängd, i syfte att minskacementets negativa inverkan på miljön.I föreliggande arbete har en genomgång utförts på erhållna data med exponeringsklasser,därefter påbörjades en litteraturstudie i syfte att inhämta kunskaper inomområdet. Med hjälp av experter har två fiktiva recept för respektive exponeringsklassräknats fram för standardbetongen och den gröna betongen. Med denna metod genomfördesen noggrann jämförelse mellan de olika recepten avseende cementets inverkanpå den globala uppvärmningen. Därefter undersöktes existerande EPD:er, vilka infogadesin i programvaran One Click LCA (2015). En LCA i den nämnda programvaranutfördes, vilket möjliggjorde att data kunde sammanställas och en jämförelse av klimatpåverkanmellan de fyra olika fiktiva recepten kunde genomföras.Sammanställd och jämförd data från LCA och analys av EPD:er visar att 70% av konstruktionenmed exponeringsklass XD2 får en reducering på 47% på den globala uppvärmningenvid användning av grön betong istället för standardbetong. Vidare visarresultatet att resterande 30% av konstruktionen med exponeringsklass XF3/XC4 fåren reduktion på 20% vid användning av grön betong istället för standardbetong. Dentotala reduktionen på den globala uppvärmningen vid användning av grön betongistället för standardbetong för utbyggnaden av Sickla reningsverk beräknades till 40%.

Made available in DSpace on 2014-07-29T15:18:25Z (GMT). No. of bitstreams: 1 dissertacao marcus vinicius mendes.pdf: 2369089 bytes, checksum: 841841ae88caf7c6c9adb67b65e533c5 (MD5) Previous issue date: 2009-10-06 / The durability of reinforced concrete structures is damaged by the degrading action of the penetration of substances in the form of gases, vapors and liquids through the pores and cracks. It is known that water both in its pure form or containing dissolved ions such as chloride, sulphate, carbon dioxide or oxygen ions, can compromise the durability of concrete structures. In reinforced concrete structures at the marine environment, for example, the towers of wind power plants, this degradation can be more intense and accelerated. Thus, in the present study were analyzed concretes with different mineral additions (silica fume, blast furnace slag) and water / binder ratios (0.35, 0.45 and 0.55), with the objective to verify if the inside and cover thickness of concrete have some effect on the mechanisms of transport and also the effect of carbonation (only for concrete with w/b equal to 0.55) in the surface layer of concrete is important enough to make dificult the entry of aggressive agents in concrete. For this, the following tests to evaluate the mass transport in concrete were performed: capillary water absorption (NBR 9779:1995), water penetration under pressure (NBR 10787:1994), air permeability (method Figg), penetrability of chloride ion (ASTM C 1202: 2009), non-steadystate migration test (NT BUILD 492:1999). As a result, it was found that the mineral addition used generally provided an improvement in front of the concrete mechanisms of mass transport. In one of the properties, namely the diffusion coefficient (non-steady-state migration) of concrete with the use of silica fume and blast furnace slag, this has been reduced dramatically, around 11 times for the concrete with w/b equal to 0.55, when it is compared with concrete without mineral addition. It was observed that the inner region of concrete behaved better, in an unexpected way, than concrete cover region for some properties (capillary absorption, water penetration under pressure, penetration of chloride ions). From this conclusion, it can be said that the inner part of concrete is composed of transition zones (aggregated interface / mortar) exposed to facilitate the entry of fluids, gases and ions. About the effect of carbonation, this affected the capillary absorption and air permeability. The results led to explain that the clogging of the pores resulting from the product of carbonation (CaCO3), promoted the refinement of the pores, thus increasing capillary force and, consequently, increasing the capillary absorption. However, for air permeability this effect has damaged the passage of air through the surface layer. Finally, it is important noting that significant correlations were found among tests that evaluated the mechanisms of mass transport, namely, penetration of chloride ions and capillary absorption, diffusion coefficient (non-steady-state migration) and capillary absorption, permeability air and water penetration under pressure, penetration of chloride ions and the diffusion coefficient. / A durabilidade das estruturas de concreto armado é prejudicada pela ação deteriorante da penetração de substâncias na forma de gases, vapores e líquidos através de poros e fissuras. Sabe-se que a água, tanto no seu estado puro ou com íons dissolvidos, como os cloretos, sulfato, dióxido de carbono ou oxigênio, pode comprometer a durabilidade das estruturas de concreto. Em estruturas de concreto armado localizadas em ambiente marítimo como, por exemplo, as torres de energia eólica, essa deterioração pode ser mais intensa e acelerada. Diante disso, no presente trabalho foram analisados concretos com diferentes adições minerais (sílica ativa e escória de alto-forno) e relações água/aglomerante (0,35; 0,45 e 0,55), tendo como objetivo principal verificar se a parte interna e o cobrimento do concreto exercem algum efeito nos mecanismos de transporte e, se o efeito da carbonatação (somente para concretos de relação a/g igual a 0,55) na camada superficial do concreto é relevante a ponto de dificultar a entrada de agentes agressivos no concreto. Para isso, foram realizados os seguintes ensaios para avaliar o transporte de massa no concreto: absorção de água por capilaridade (NBR 9779:1995), penetração de água sob pressão (NBR 10787:1994), permeabilidade ao ar (método de Figg), penetrabilidade de cloretos (ASTM C 1202: 2009), ensaio de migração em regime não estacionário (NT BUILD 492:1999). Como resultado constatou-se que as adições minerais empregadas propiciaram de maneira geral uma melhoria dos concretos frente aos mecanismos de transporte de massa. Em uma das propriedades avaliadas, a saber, o coeficiente de difusão (migração regime não estacionário) dos concretos com o emprego de sílica ativa e escória de alto-forno, esse foi reduzido drasticamente, em torno de 11 vezes para os concretos com relação a/ag igual a 0,55, quando comparado com os concretos sem adição mineral. Quanto à região do concreto, notou-se para algumas propriedades (absorção capilar, penetração de água sob pressão, penetrabilidade de cloretos) que a região interna comportou-se melhor, de maneira inesperada, que a região do cobrimento. Diante dessa conclusão, criou-se uma hipótese para tal comportamento que consistiu em afirmar que a parte interna é composta por zonas de transição (interface agregado/pasta) expostas que facilitam a entrada de fluidos, gases e íons. Já com relação ao efeito da carbonatação, esta afetou a absorção capilar e a permeabilidade ao ar. Os resultados levaram a explicar que a colmatação dos poros, advindos do produto (CaCO3) da carbonatação promoveu o refinamento dos poros, aumentando, assim, a força capilar e, conseqüentemente, o aumento da absorção capilar. No entanto, para permeabilidade ao ar esse efeito dificultou a passagem de ar através da camada superficial. Por último, cabe destacar, que correlações importantes foram obtidas entre os ensaios que avaliaram os mecanismos de transporte de massa, a saber, penetrabilidade de cloretos e absorção capilar, coeficiente de difusão (migração regime não estacionário) e absorção capilar, permeabilidade ao ar e penetração de água sob pressão, penetrabilidade de cloreto e coeficiente de difusão.

The topic of this work is the monitoring of the effect of zinc on the hydration process in Portland mixed cement (specifically with the addition of finely ground granulated blast-furnace slag, high temperature fly ash and fluidized bed combustion filter ash). How much zinc and at what time it remains in the pore solution during hydration. Activation energy of a mixture of cement with zinc in the form of soluble salts (Zn(NO3)2.6H2O and ZnCl2) and insoluble oxide (ZnO) by isothermal calorimetry was also investigated. The XRF method has shown composition during hydration. The zinc retardation effect was investigated by isothermal calorimetry and activation energy was calculated using this method. The XRF and ICP-OES methods were used to measure the zinc content of the pore solution. And the amount of portlandite was monitored by the DTA and XRF method.

This work is devoted to study the influence of the composition on mechanical properties of high performance concret based on portland cement. 29 samples of high performance concrete (HPC) warying in composition were prepared. The constituents used for HPC preparation were: cement Aalborg White, silica fume, finelly ground blast furnace slag, finelly ground silica, calcinated bauxite and polycarboxylate based superplasticizer. The mechanical parameters (flexural and compressive strength) of the samples were observed after 7 and 28 days of moist curing. Compressive strength values after 28 days were in the range of 92 to 194 MPa and the flexural strength values were in the range of 7 to 23 MPa (without using of fiber reinforcement). The graphs showing mechanical parameters depending on the mixture composition were constructed and consequently evaluated.

Civil engineering development is connected with the application of new construction methods and the development of new building materials. Concrete, as one of the basic building materials, is part of this development. A major turning point in the development of concrete and its properties occurred with the use of new, more efficient plasticizing additives. This allowed to produce concrete with lower water cement ratio, while increasing the strength of concrete. Gradually, the compressive strength of concrete boundary has moved by several levels, when there are currently commonly used concrete with strength of about 100 N/mm2 and with the special methods of concrete production strength range from 250 to 300 N/mm2. A negative aspect of the development of (ultra) high-strength concrete is their energy and economic demands. A characteristic feature of high-strength concrete is a high content of cement and very fine admixtures, especially silica fume. One way to improve the economics of these types of concrete is the application of cheaper admixture based on industrial waste. The content of this work is the observation and description of the properties of high-strength concrete and reactive powder concrete, in which the admixtures were based on industrial waste were applied. Part of this work is the comparison of economic parameters for individual types of concrete.

The theme of this work is to monitor the effect of zinc on the properties of blended Portland cements. Zinc was tested in the form of two-soluble salts: Zn(NO3)22 H2O and ZnCl2 and a very slightly soluble compound ZnO. Blended cements were prepared by partial replacement with finely ground granulated blast furnace slag, high-temperature and fluidized bed combustion filter fly ash. Flow properties were studied on the prepared pastes. Impact on hydration reactions was examined by using of isothermal and isoperibolic calorimetry. Flexural and compressive strength were measured as mechanical properties of the prepared test specimens. The phase composition of the prepared composites and incorporation of zinc ions in the cement matrix via leaching tests and FTIR analyzes were also studied. Microstructure development of cement samples was tested by SEM analysis with EDS. Influence on ecotoxicity was also measured.

Tesis por compendio / [ES] Esta tesis englobada dentro del programa de doctorado en ingeniería de la construcción sigue la línea de investigación en sostenibilidad y gestión de la construcción. Las investigaciones se han centrado en el desarrollo de cementos de activación alcalina (CAA) obtenidos a partir de residuos con el fin de reducir tanto el coste económico como medioambiental. Este hecho implicaría la reducción en el uso tanto de materias primas, en el caso de los precursores, como de reactivos químicos en el caso de los activadores. La tesis doctoral que se presenta estudia el uso de diferentes mezclas de residuos como precursores: cerámica sanitaria, catalizador gastado de craqueo catalítico, escoria de alto horno y ceniza volante de central térmica en la preparación de morteros. Así mismo, utiliza también CAA, obtenidos a partir de residuos en la estabilización de suelos. En este último caso también se han usado residuos en la preparación de activadores como son las cenizas obtenidas en la combustión de biomasa. Los resultados obtenidos ponen de manifiesto la viabilidad en el uso de residuos para la preparación de CAA, y la posibilidad incluso de ser usados en contextos de subdesarrollo. / [CA] Aquesta tesi englobada dins del programa de doctorat en enginyeria de la construcció segueix la línia d'investigació en sostenibilitat i gestió de la construcció. Les investigacions s'han centrat en el desenvolupament de ciments d'activació alcalina (CAA) obtinguts a partir de residus amb la finalitat de reduir tant el cost econòmic com mediambiental. Aquest fet implicaria la reducció en l'ús tant de matèries primeres, en el cas dels precursors, com de reactius químics en el cas dels activadors. La tesi doctoral que es presenta estudia l'ús de diferents mescles de residus com a precursors: ceràmica sanitària, catalitzador gastat de craqueig catalític, escòria d'alt forn i cendra volant de central tèrmica en la preparació de morters. Així mateix, utilitza també CAA, obtinguts a partir de residus en l'estabilització de sòls. En aquest últim cas també s'han usat residus en la preparació d'activadors com són les cendres obtingudes en la combustió de biomassa. Els resultats obtinguts posen de manifest la viabilitat en l'ús de residus per a la preparació de CAA, i la possibilitat de ser usats fins i tot en contextos de subdesenvolupament. / [EN] This doctoral thesis encompassed within the doctoral program in construction engineering follows the research line in sustainability and construction management. The research has focused on the development of alkaline activated cements (AAC) obtained from waste to reduce the economic and environmental cost. This fact would imply a reduction in the use of raw materials in the case of precursors, and chemical reagents in the case of activators. The doctoral thesis that is presented studies the use of different waste mixtures as precursors: sanitary ceramics, spent fluid cracking catalyst, blast furnace slag and fly ash from thermal power plants in the preparation of mortars. Likewise, also is used CAA obtained from residues in soil stabilization. In the latter case, residues have also been used in the activators preparation, such as the ashes obtained in the combustion of biomass. The results obtained show the viability in the use of residues for CAA preparation, and the possibility of being used even in underdeveloped contexts. / Agradecer al Ministerio de Ciencia e Innovación por el soporte a mi investigación, mediante los fondos del proyecto APLIGEO BIA2015-70107-R y los fondos FEDER. También a las empresas: Ideal Standard por suministrar residuos de cerámica sanitaria, Omya Clariana S.A. por suministrar catalizador gastado del craqueo catalítico, a Balalva S.L. por suministrar cenizas volantes, a Cementval por suministrar escorias de alto horno, a Heineken España S.A. por el suministro de residuo del filtrado de cerveza (tierras diatomeas), a DACSA GROUP por la ceniza de cáscara de arroz, y a PAVASAL por suministrar suelo de tipo dolomítico. Támbien al servicio de Microscopía electrónica y al Instituto de Ciencia y Técnología del Hormigón de la Universitat Politècnica de València. / Cosa Martínez, J. (2022). Utilización de mezclas de residuos para la obtención de cementos de activación alcalina: aplicación en morteros y suelos estabilizados [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/185221 / Compendio