This paper presents basic principles of optical coherence tomography, review of applications and basic categorization of these systems. Paper also deals with the typical properties of images from optical coherence tomography, especially speckle pattern. This paper also provides an overview of the origin of speckle noise and utilization of its dependence on microstructure of probed tissue for image classification based on textural analysis. Experimental part of this paper consists of phantom preparation, data acquisition by OCT system, implementation of speckle analysis in MATLAB and of testing of its functionality on standard textural dataset and also on acquired image phantom data. Speckle analysis is used for phantom image data segmentation.

Manufacturing of precise structures in MEMS, semiconductors, optics and other fields requires high standards in manufacturing and quality control. Appropriate surface topography measurement technologies should therefore deliver nm accuracy in the axial dimension under typical industrial conditions. This work shows the characterization of a dispersion-encoded low-coherence interferometer for the purpose of fast and robust surface topography measurements. The key component of the interferometer is an element with known dispersion. This dispersive element delivers a controlled phase variation in relation to the surface height variation which can be detected in the spectral domain. A laboratory setup equipped with a broadband light source (200 - 1100 nm) was established. Experiments have been carried out on a silicon-based standard with height steps of 100 nm under different thermal conditions such as 293.15 K and 303.15 K. Additionally, the stability of the setup was studied over periods of 5 hours (with constant temperature) and 15 hours (with linear increasing temperature). The analyzed data showed that a height measurement of 97.99 ± 4:9nm for 293.15 K and of 101.43 ± 3:3nm for 303.15 K was possible. The time-resolved measurements revealed that the developed setup is highly stable against small thermal uctuations and shows a linear behaviour under increasing thermal load. Calibration data for the mathmatical corrections under different thermal conditions was obtained.

[pt] Foram desenvolvidas fontes ópticas para obtenção de imagens por tomografia de coerência óptica com alta resolução. Dois tipos de abordagens foram realizados, uma com um laser contínuo sintonizável, que neste trabalho foi instrumentado com marcadores de frequência óptica, outra com uma fonte óptica pulsada de banda larga. Mediante um processo de calibricação desenvolvido neste trabalho, a fonte contínua forneceu resoluções de 8 μm e alcances até 0,5 mm, enquanto que a fonte pulsada forneceu resoluções de 3 μm e alcances de 300 μm. A fonte pulsada permitiu ainda a obtenção de imagens em tempo real com capacidade de captura de movimento do objeto. / [en] Optical sources to obtain images through high resolution optical coherence tomography were developed. Two approaches were taken, one with a continuously tunable external cavity laser which, in this work, was modified to produce optical frequency markers, the other with an ultra-wideband pulsed source. Using a calibration process we developed in this work the continuously tunable source continued to achieve resolutions 8 μm and ranges of 0.5 mm, while the pulsed source achieved resolutions of 3.3 μm and ranges of 300 μm. The pulsed source has the capacity to capture real time images.

Denna studie undersöker förutsättningarna för implementering av EU:s nya skogsstrategi i en flernivåstyrningskontext. Policykonflikter har varit framträdande inom olika områden, inte minst inom skogspolitiken, och skogsägare har haft svårigheter att navigera bland de regleringar som finns både på nationell och EU-nivå. Därför fokuserar denna uppsats på den övergripande forskningsfrågan: Är skogspolitiken samstämmig? Genom att analysera och jämföra policykoherensen mellan EU:s skogsstrategi och två viktiga svenska policydokument – klimathandlingsplanen från 2023 och strategin för biologisk mångfald och ekosystemtjänster från 2013 – syftar studien till att belysa hur väl dessa strategier samverkar och är samstämmiga inom skogspolitiken på både EU- och nationell nivå. Studien finner överensstämmelser mellan vissa mål i EU:s skogsstrategi och de svenska dokumenten, vilket indikerar en potential för implementering. Samtidigt identifieras konflikter mellan vissa policys, särskilt vad gäller prioriteringar och tidsramar. Dessa avvikelser minskar policykoherensen och skapar hinder för en effektiv implementering av EU:s skogsstrategi i Sverige. Studien bidrar därmed till en ökad förståelse av skogspolitikens samstämmighet och belyser utmaningar för implementeringen av mål på olika nivåer inom den svenska skogspolitiken.

I denna kvalitativa studie undersöks positiva aspekter av att vara verksam inom socialt arbete, hur erfarna socialarbetare beskriver sina drivkrafter och vilka faktorer som påverkar välbefinnande i arbetet. Intervjuer gjordes med fem socialarbetare som arbetat inom yrket i 30 år eller mer. Intervjumaterialet analyserades utifrån Antonovskys teori känsla av sammanhang (KASAM) och begreppen begriplighet, hanterbarhet och meningsfullhet. Under analysen framkom några områden som centrala för syftet. Dessa handlade om en god atmosfär på arbetsplatsen och i arbetsgruppen, relationer med klienten, vikten av humor, rörlighet som strategi samt hur påfrestning kan vändas till drivkraft. Resultaten visade att påfrestningar som en socialarbetare möter utgör en viktig del för att känna drivkraft och meningsfullhet i arbetet. Viktigt för att känna välbefinnande är en god arbetsgrupp, en god atmosfär på arbetsplatsen och relationer med klienter. / In this qualitative study, the positive aspects of social work and how experienced social workers describe their motivation and well-being, are examined. Five experienced social workers, who all had worked for 30 years or more, were interviewed. The theory Sense of coherence (SOC) by Antonovsky, and the constructs comprehensibility, manageability and meaningfulness, were used to analyze the material from the interviews. During the analysis a few themes appeared to be of more importance for the purpose of the study. These were: a good atmosphere at the workplace and among colleagues, relations with clients, the importance of humor, mobility as a strategy and how stress can be turned into motivation. The results showed that the stress the social worker meets, is a significant source for the ability to be motivated and feel meaningfulness in social work. A good atmosphere at the workplace and among colleagues and good relations with clients were of importance for a sense of well-being among the social workers in the present study.

No description available.

Psychology / (D. Litt et Phil.(Psychology ))

Value-at-Risk (VaR) model fails to predict financial risk accurately especially during financial crises. This is mainly due to the model’s inability to calibrate new market information and the fact that the risk measure is characterised by poor tail risk quantification. An alternative approach which comprises of the Expected Shortfall measure and the Lognormal Jump-Diffusion (LJD) model has been developed to address the aforementioned shortcomings of VaR. This model is called the Simulated-Expected-Shortfall (SES) model. The Maximum Likelihood Estimation (MLE) approach is used in determining the parameters of the LJD model since it’s more reliable and authenticable when compared to other nonconventional parameters estimation approaches mentioned in other literature studies. These parameters are then plugged into the LJD model, which is simulated multiple times in generating the new loss dataset used in the developed model. This SES model is statistically conservative when compared to peers which means it’s more reliable in predicting financial risk especially during a financial crisis. / Statistics / M.Sc. (Statistics)

Coherence scanning interferometry (CSI) is a non-contacting optical technique which is widely used for the measurement of surface topography. CSI combines the lateral resolution of a high power microscope with the axial resolution of an interferometer. As with any other metrology instrument, CSI is calibrated to define measurement uncertainty. The traditional calibration procedure, as recommended by instrument manufacturers, consists of calibration of the axial and lateral scales of the instrument. Although calibration in this way provides uncertainties for the measurement of rectilinear artefacts, it does not give information about tilt-related uncertainty. If an object with varying slope is measured, significant errors are observed as the surface gradient increases. In this thesis a novel approach of calibration and adjustment for CSI using a spherical object is introduced. This new technique is based on three dimensional linear filtering theory. According to linear theory, smooth surface measurement in CSI can be represented as a linear filtering operation, where the filter is characterised either by point spread function (PSF) in space domain or by transfer function (TF) in spatial frequency domain. The derivation of these characteristics usually involves making the Born approximation, which is strictly only applicable for weakly scattering objects. However, for the case of surface scattering and making use of the Kirchhoff approximation, the system can be considered linear if multiple scattering is assumed to be negligible. In this case, the object is replaced by an infinitely thin foil-like object, which follows the surface topography and, therefore, is called the foil model of the surface. For an ideal aberration free instrument, the linear characteristics are determined by the numerical aperture of the objective lens and the bandwidth of the source. However, it is found that the PSF and TF of a commercial instrument can depart significantly from theory and result in a significant measurement error. A new method, based on modified inverse filter to compensate the phase and amplitude-related errors in the system PSF/TF, is demonstrated. Finally, a method based on de-warping to compensate distortion is discussed. The application of the linear theory as well as modified inverse filter is dependent on the assumption of the shift invariance. As distortion introduces a field dependent magnification, the presence of distortion for CSI with relatively large field of view, restricts the applicability of the linear theory. Along with this restriction, distortion also introduces erroneous height measurement for objects with gradients. This new approach, based on de-warping, resolves the problems associated with distortion.

Traditionally, surface topography measurement was in the domain of quality control of engineering parts. With the advancement of manufacturing technology and affordable computational costs, different types of surfaces are produced with varied shapes and surface textures. These pose significant measurement problems, therefore, surface topography research is gaining momentum to achieve a better control of the surface. Coherence scanning interferometry (CSI) is one of the most common techniques used for measurement of surface topography. It is preferred over tactile and other non-contact techniques since it provides fast and accurate measurement with high vertical (~ 1 nm) and lateral (~1 μm) resolutions over larger areas without any damage to the surface. Essentially, CSI is treated as one dimensional (1D) superposition of the light waves from an object and a reference that generates a three dimensional (3D) interferogram. Secondly, despite the advantages, there is no standard configuration of CSI that can provide absolute surface topography measurement of an engineering part with multiple materials. An effective solution to this problem will be particularly useful in the field of semiconductor and bio-related industries where chips and instruments are made of many materials. In this Thesis, first, the CSI technique is analysed in terms of a wider theoretical framework of 3D linear filtering technique which shows the similarities among other seemingly disparate techniques such as confocal and optical coherence tomography. Due consideration to the spectral characteristic of the source and the effect of numerical aperture are given and important parameters such as vertical and lateral resolutions are computed to compare this theory with standard analysis methods. Additionally, it is shown that the 3D fringe pattern can be considered to be a superposition of a reference field and the scattered field from the top foil-like layer on the top the object. The scattered field from this foil object is dependent on the normal Fresnel reflection coefficients. Therefore, it explains the phase offset and the proportional height offset introduced by different materials, especially, metals. In an object, where multiple materials are present, each material introduces different phase to the fringe pattern and therefore, the surface topography of the entire object is altered. To overcome this problem, the optical polarising properties of the material are exploited. A novel configuration of polarisation sensitive CSI is presented where interferograms with orthogonal circular polarisations are recorded and analysed. The configuration, initially, needs to be calibrated with a material and after that at each point on the object, the refractive index and height offset can be calculated. Therefore, it can be dually used to identify unknown materials present on the object and also to compensate for the height offset introduced by each material to produce absolute surface topography of the entire object. The configuration provides good agreement with ellipsometric results for metals. Additionally, it retains the advantages of high vertical and lateral resolution same as other standard coherence scanning interferometers.