Mountain laurel (Kalmia latifolia L.) is relatively difficult to establish in landscapes. One experiment tested the effect of container size on the water relations of pinebark substrate embedded in field soil. Two other experiments tested the effects of transplant season and container size on landscape establishment of nursery-produced mountain laurel. Experiment one compared volumetric water content of embedded substrate of five sizes (4-L to 100-L) to adjacent field soil at two depths with time domain reflectometry (TDR) during a dry down cycle. Available water was calculated by subtracting unavailable water (estimated with pressure plates) from volumetric water content (TDR measurements). Adjacent soil contained more available water than embedded substrate. The middle depth held more water than the top. Larger pinebark substrate volumes retained higher volumetric water content than smaller volumes. The second experiment consisted of 7.6- and 19-L containers of Kalmia latifolia L. ‘Olympic Wedding’, transplanted into field soil in October or May. Larger container plants generally had lower xylem potential than smaller plants, but better visual ratings. Root growth into surrounding soil was negligible for all treatments. Leaf area was higher for spring transplants than fall transplants. Experiment three was a rhizotron study with 19-L plants, transplanted in October or May. Canopy growth of spring transplants was greater than fall transplants, but fall transplants had longer roots into the backfill. Overall, our data suggest that fall transplanting will potentially allow faster plant establishment than spring transplanting. The effect of container size on plant establishment could not be determined. / Master of Science

Research on unit load stability aids manufacturing facilities in selecting the most efficient load stabilizer when shipping their products to market. This study's objective was to compare the performance a variety of different commonly used load stabilizers to stretch hooding. Stretch hooding is a method of load stabilization in which a tubular film is heat sealed at the top, stretched by four mechanical arms to a desired width, pulled down over the unit load. The film is slowly released as the arms descend, and is released under the pallet. 400ga stretch hooding, 80ga and 63ga stretch wrap and strapping were tested. Twenty unit loads for both vibration and impact testing were used, with 5 replications per load stabilizer. Container displacement and pallet-container displacement were measured, and the number of tares in the load stabilizer film, on the corners of the test units, after testing, was noted. Container displacement was significantly greater during impact testing than in vibration testing. Strapping was the most effective stabilizer during vibration testing because of its ability to restrict vertical displacement. The stretch hooding was the most effective stabilizer during impact testing because of its ability to restrict horizontal displacement. / Master of Science

Growing landscape trees in containers is a common practice in the nursery industry. In the southeastern United States, pine bark is often used as a container substrate, and two common amendments to pine bark are lime and micronutrients. In this study, three experiments were conducted to determine the effect of these amendments on the growth of a wide range of landscape tree species grown in pine bark. In the first experiment, nine species of landscape trees [Acer palmatum (Japanese maple), Acer saccharum (sugar maple), Cercis canadensis (redbud), Cornus florida (flowering dogwood), Cornus kousa (kousa dogwood), Koelreuteria paniculata (golden-rain tree), Magnolia x soulangiana (magnolia), Nyssa sylvatica (blackgum), and Quercus palustris (pin oak)] were grown from seed in two pine barks: pH 4.7 (low) and 5.1 (high). Preplant amendment treatments to each pine bark (Pinus taeda) were: with or without dolomitic limestone (3.57 kg.m-3) and with or without micronutrients (0.9 kg.m-3, Micromax™). The same experiment was repeated using Koelreuteria paniculata and Quercus palustris, the same lime and micronutrient treatments, and two pine barks: pH 5.1 (low) and 5.8 (high). In both experiments, micronutrients increased shoot dry mass and height for all species, while lime decreased shoot dry mass and height for all species. Effect of bark type in the first experiment was variable, while shoot dry mass and height were highest in the low pH bark when the experiment was repeated. Substrate solution element concentrations increased when micronutrients were added, decreased when lime was added, and in general, concentrations were higher in low pH bark than in high pH bark. In the third experiment, Koelreuteria paniculata was grown from seed in pine bark amended with 0, 1.2, 2.4, or 3.6 kg.m-3 dolomitic limestone and 0 or 0.9 kg.m-3 micronutrients (Micromax™). Initial pH for each lime rate was 4.0, 4.5, 5.0, and 5.5, respectively. Adding micronutrients increased shoot dry mass and height. Lime increased growth only at the 1.2 kg.m-3 rate. In general, substrate solution element concentrations increased when micronutrients were added and decreased when lime was added. In all three experiments, adding micronutrients was necessary regardless of pine bark pH, while adding lime was not necessary. / Master of Science

Analysis of trnasporter's liability in container traffic in terms of law.

Thesis (M. A. Agriculture (Plant Protection)) -- University of Limpopo, 2019 / The influence of cultural practices can be modified by environmental conditions such as container-type or positioning. The objective of the study was to determine whether container-type and positioning would have an influence on the growth of tomato plants and suppression of Meloidogyne javanica exposed to biomuti (Trial 1) and Afrikelp (Trial 2). Different container-types were filled with approximately 10.4 L growing mixture comprising steam-pasteurised sandy loam soil and Hygromix-T at 3:1 (v/v) ratio. The containers were established in microplots at 0.6 m × 0.6 m spacing, with treatments being brown pot-below; brown pot-above, black pot-below, black pot-above, plastic bag-above and plastic bag-below. Tomato (Solanum lycopersicum L.) cv. 'Floradade' seedlings were each transplanted and irrigated with 500 ml chlorine-free tapwater every other day. Seven days after transplanting, each plant was inoculated with 2000 eggs and second-stage juveniles (J2) of M. javanica. Biomuti and Afrikelp, obtained from the Agricultural Research Council (ARC) Vegetable, Ornamentals and Plants (VOP), were applied in separate trials weekly at 2.5%. At 56 days after inoculation, plant growth including selected nutrient elements and nematode variables were measured. Data were subjected to analysis of variance, with separation of means achieved using Fisher’s Least Significant Difference test at the probability level of 5%. In the biomuti trial, container-type and positioning had a significant effect on plant height, fruit number, dry root mass, dry shoot mass and fruit mass, contributing 82, 48, 44, 85 and 89% in total treatment variation (TTV) of the respective variables. Relative to brown pot-below; black pot above, plastic bag-above and brown pot-above reduced plant variables, whereas treatment effects were not significant on nematode variables. In the Afrikelp trial, trends where similar to those in biomuti, treatments had highly significant effects on xvi plant height, dry root mass, dry shoot mass and gall rating, contributing 91, 88, 66 and 60% in TTV of the respective variables. Relative to brown pot-below; black pot above, plastic bag-above and brown pot-above reduced the plant variables, but had no significant effects on nematode variables. Generally, plastic bags and polyethylene pots below-ground improved most plant growth variables when compared to those in containers positioned above-ground.

Purpose – The purpose of this paper is to explore the possibility to effectivize local networks and databases using unikernels and compare this to containers. This could also apply to reliability of executing programs the same way on different hardware in software development. Method – Two experiments have been performed to explore if the purpose could be realized, quantitative data have been gatheredand displayed in both cases. Python-scripts have been used to start C-scripts, acting client and server. Algorithms have been timed running in unikernels as well as in containers along with compared measurements of memory in multiple simultaneous instantiations. Findings – Intermittent response times spiked made the data hard to parse correctly. Containers had a lower average response time when running lighter algorithms. The average response times of unikernels dives below that of containers when heavier programs are simulated. Few minor bugs were discovered in Unikraft unikernels. Implications – unikernels havecharacteristics that make them more suitable for certain tasks compared to their counterpart, this is also true for containers. Unikraft unikernels are unstable which makes it seem like containers are faster during lighter simulations. Unikernels are onlyfaster and more secure if the tools used to build them does so in a manner that makes them stable. Limitations – The lack of standards, the lack of a support community together with the fact that unikernels is a small and niche field means that unikernels have a relatively high learning curve. Keywords – Unikraft, Unikernels, Docker, Container / Syfte – Syftet med denna studie är att undersöka möjligheten att effektivisera lokala nätverk och databaser med hjälp av unikernels och att jämföra denna möjlighet med containrar. Detta kan även gälla utveckling av programvara för att säkerställa att programvaran exekveras på servern på exakt samma sätt som den tidigare gjort lokalt på utvecklarens lokala dator. Metod – Två experiment utförs för att undersöka om det går besvara syftet, kvantitativa data samlas in i båda fallen, datan är även redovisad kvantitativt. Python-script används föratt starta C-script som agerar klient och server. Tidtagning på algoritmer i unikernels respektive containrar samt minnesanvändning vid multipel instansiering mättes för att analyseras och jämföras. Resultat – Intermittenta svarstids-toppar gjorde datan från unikernels svår att korrekt utvärdera. Containrar hade ett lägre medelvärde på svarstider vid mindre krävande algoritm-användning. Unikernels medelvärde dyker under container-svarstiderna när mer krävande program simuleras. Några små buggar upptäcktesi Unikraft unikernels. Implikationer – Unikernels har egenskaper som gör de mer passande för vissa uppgifter jämfört med dess motsvarighet medan detsamma gäller för Containrar. Unikraft unikernels är instabila och ger därfören bild av att containrar vidmindre processorkrävande program faktiskt är snabbare än unikernels. Unikernels är bara snabbare och säkrare i den mån verktyget som bygger dem, gör det på ett sätt att de är stabila. Begränsningar – Avsaknaden av standarder, avsaknaden av ett communitysom kan svara på frågor tillsammans med att unikernelsär ett litet och nischat fält gör att unikernels har en relativ hög inlärningskurva. Nyckelord – Unikernel, Unikraft, Container, Docker

The growth of distributed applications stand on a foundation of containers and their communication and have seen the rise and fall of many implementations throughout the years with a mix of proprietary and open sources. Today there are two implementations widely used as a result of the popularity of the huge project Kubernetes: CRI-O and Containerd. Both with the edge responsibility of managing containers using similar underlying software raising the question; do they have any implications on the containers they spawn? This thesis investigate these implementations from a performance perspective with a custom developed tool for direct communication to them and run a suite of benchmarks within the containers created by each. The suite consists of tests for throughput, latency, cpu, memory, random file read/write and sequential file read/write. Results conclude they perform similarly in all, but the file tests which showed overall CRI-O dominating in write speed and Containerd dominating the read speed.

Virtualization is a technique used to abstract the operating system from the hardware. The primary gains of virtualization is increased server consolidation, leading to greater hardware utilization and infrastructure manageability. Another technology that can be used to achieve similar goals is containerization. Containerization is an operating-system level virtualization technique which allows applications to run in partial isolation on the same hardware. Containerized applications share the same Linux kernel but run in packaged containers which includes just enough binaries and libraries for the application to function. In recent years it has become more common to see hardware virtualization beneath the container host operating systems. An upcoming technology to further this development is VMware’s vSphere Integrated Containers which aims to integrate management of Linux Containers with the vSphere (a hardware virtualization platform by VMware) management interface. With these technologies as background we set out to measure the impact of hardware virtualization on Linux Container performance by running a suite of macro-benchmarks on a LAMP-application stack. We perform the macro-benchmarks on three different operating systems (CentOS, CoreOS and Photon OS) in order to see if the choice of container host affects the performance. Our results show a decrease in performance when comparing a hardware virtualized container host to a container hosts running directly on the hardware. However, the impact on containerized application performance can vary depending on the actual application, the choice of operating system and even the type of operation performed. It is therefore important to consider these three items before implementing container hosts as virtual machines.

This diploma thesis is engaged in the analysis of a safety mechanism, which is a part of a truck trailer. This mechanism provides a safe and firm connection of a container to the trailer. Primarily abroll containers according to German standard DIN 30 722 are being transported. The introductory part of the thesis deals with the current traffic condition and the accident rate in the Czech Republic. Legislative requirements for safety elements of trailer technology for road transportation are further defined. They are followed by a recherche of industrial solutions for securing mechanisms. Consequently calculations to obtain necessary securing force were performed. An analysis of the mechanism kinematics was carried out then. A structural check of selected mechanism elements was carried out following the kinematics check. Further, an optimalization of a transom design was carried out followed by another structural check. The structural checks were carried out using both the analytical method and the finite element method. In conclusion design documentation was elaborated. This diploma thesis was elaborated in cooperation with the SVAN Chrudim s.r.o.

This diploma thesis is focused on container safety mechanism which is a part of truck trailers. It designs pneumatic – mechanical safety mechanism suitable for safe transport of container with driving drum which are produced according to German standard DIN 30 722. It concerns containers with total weight of 22 tons. The first part of this thesis is focused on evaluation of possible load by common operating conditions. The technique of mechanism design is introdiced in several developing stages from original solution to final version. The final version processes all force and kinetic aspects. Selected parts of safety mechanism are controlled from solidity perspective. Some calculations and analysis were processed both by convention method and method of final elements on PC. Thesis was created in close cooperation with company SVAN Chrudim, s.r.o.