Dans le schéma de l'allumeur rapide, dernière avancée dans le domaine de la fusion par confinement inertiel, on envisage de découpler la phase de compression de la phase de chauffage du combustible nucléaire. Cette dernière serait atteinte à l'aide d'une source extérieure constituée par un faisceau d'électrons très énergétiques créé avec un laser ultra-intense. L'étude des mécanismes de transfert d'énergie de ces électrons au combustible comprimé représente le but principal de ce travail de thèse. Nous nous proposons en particulier de mettre en évidence et d'étudier le rôle joué par les effets électriques et collisionnels de la propagation du faisceau d'électrons rapides dans un milieu aux propriétés proches du combustible comprimé. Nous avons pour cela effectué deux campagnes d'expériences, l'une avec l'installation laser VULCAN du RAL (Angleterre) et l'autre sur la nouvelle installation laser 100 TW du laboratoire LULI (France). Lors de la première expérience, nous avons obtenu les premiers résultats sur la propagation d'électrons rapides dans un matériau dense et chaud. Le caractère novateur de ce travail expérimental tient en particulier à l'utilisation de la technique de génération de hautes pressions par choc laser, ce qui a permis la création d'un plasma fortement corrélé et dégénéré. Le rôle des effets électriques et magnétiques, liés à la charge d'espace créée par le faisceau d'électrons rapides, a été approfondi lors de la deuxième campagne d'expérience, au cours de laquelle nous avons étudié la propagation des électrons dans des matériaux ayant des caractéristiques électriques différentes (isolant ou conducteur). L'analyse des résultats montre que seule la prise en compte simultanée des deux mécanismes de la propagation (collisionnels et électriques) permet un traitement correct et complet du dépôt d'énergie. La nécessité de prendre en compte les modifications apportées à la matière par le passage même des électrons, et notamment le chauffage induit, a été également mise en évidence.

Le travail de ma these est dedie au developpement de nouvelles techniques d'investigation de la matiere dense et chaude, aussi connue sous l'acronyme WDM (pour Warm Dense Matter en anglais). Ce regime se situe a la frontiere entre la physique de la matiere condense et la physique des plasmas. Il est characterise par des densites comprises entre 0.1 et 100 fois la densite du solide et des temperatures dans l'intervalle 0.1-100 eV. Notre connaissance du comportement de la matiere dans ce regime est peu precise bien que sa comprehension soit indispensable dans differents domaines de la physique. En particulier, la connaissance de la relation entre la pression, la densite et la temperature, qui definit l'equation d'etat (EOS) est un point clef dans des domaines aussi importants que la fusion par confinement inertiel (FCI), lgeophysique, l'astrophysique, et la planetologie.

A granular material is a collection of discrete, solid particles of macroscopic size dispersed in an interstitial fluid, in which the fluid has an insignificant effect on the particle dynamics. Because they exhibit fascinating properties because of dissipative interactions, due to their importance in geophysical and industrial processes, flows of granular materials have been the focus of large amount of research involving physicists and engineers. A good understanding of the physics of granular materials is desired in order to design efficient processing and handling systems. Granular materials can be heaped like a solid, and can flow like a fluid. Though the two distinct regimes of granular flows are well described by kinetic theory (rapid flows) and plasticity theories (quasi-static), the intermediate dense flow regime, where collisional and frictional interactions are important, is not yet described successfully. In this thesis, we examine the applicability of kinetic theory for dense granular flows, the structure and dynamics in sheared inelastic hard disks systems and dynamics of sheared non-spherical particles. Two complementary simulation techniques, the discrete element (DE) technique for soft particles and the event driven (ED) simulation technique for hard particles, are used to examine the extent to which the dynamics of an unconfined dense granular flow can be well described by a hard particle model when the particle stiffness becomes large. First, we examine the average co-ordination number for the particles in the flow down an inclined plane using the DE technique using both linear and Hertzian contact models. The simulations show that the average co-ordination number decreases below 1 for values of the spring stiffness corresponding to real materials such as sand and glass, even when the angle of inclination is only 1olarger than the angle of repose. The results of the two simulation techniques for the Bagnold coefficients (ratio of stress and square of the strain rate) and the granular temperature (mean square of the fluctuating velocity) are found to be in quantitative agreement. In addition, we also conduct the comparison of the pre-collisional relative velocities of particles in contact. Since momentum is transported primarily by particle contacts in a dense flow, the relative velocity distribution is a sensitive comparison of the dynamics in the two simulation techniques. It is found that the relative velocity distribution in both simulation techniques are well approximated by an exponential distribution for small coefficients of restitution, indicating that the dynamics of a dense granular flow can be adequately described by a hard particle model. The structure and dynamics of the two-dimensional linear shear flow of inelastic disks at high area fractions are analysed. The event-driven simulation technique is used in the hard-particle limit, where the particles interact through instantaneous collisions. The structure (relative arrangement of particles) is analysed using the bond-orientational order parameter. It is found that the shear flow reduces the order in the system, and the order parameter in a shear flow is lower than that in a collection of elastic hard disks at equilibrium. The distribution of relative velocities between colliding particles is analysed. The relative velocity distribution undergoes a transition from a Gaussian distribution for nearly elastic particles, to an exponential distribution at low coefficients of restitution. However, the single-particle distribution function is close to a Gaussian in the dense limit, indicating that correlations between colliding particles have a strong influence on the relative velocity distribution. This results in a much lower dissipation rate than that predicted using the molecular chaos assumption, where the velocities of colliding particles are considered to be uncorrelated. The orientational ordering and dynamical properties of the shear flow of inelastic dumbbells in two dimensions are studied, as a first step towards examining the effect of shape on the properties of flowing granular materials. The dumbbells are smooth fused disks characterised by the ratio of the distance between centers (L) and the disk diameter (D), and the ratio (L/D)varies between 0 and 1 in our simulations. Area fractions studied are in the range 0.1 to 0.7, while coefficients of normal restitution from 0.99 to 0.6 are considered. The simulations are similar to the event driven simulations for circular disks, but the procedure for predicting collisions is much more complicated due to the non-circular shape of the particles and due to particle rotation. The average orientation is measured using an orientational order parameter S, which varies between 0 (for a perfectly disordered fluid) and 1 (for a fluid with the axis of all dumbbells in the same direction). It is found that there is a gradual increase in ordering as the area fraction is increased, as the aspect ratio is increased or as the coefficient of restitution is decreased, and the order parameter has a maximum value of about 0.5 for the highest area fraction and lowest coefficient of restitution considered here. However, there is no discontinuous nematic transition for all the parameters studied here. The axis of the dumbbells are preferentially oriented along the extensional axis (at an angle of 45ofrom the flow direction) at low area fraction, but the orientation is closer to the flow direction as the area fraction is increased. The orientation distribution is calculated, and it is found that the orientation distribution is well described by a function of the form P(θ) =(1/π)+ (2S/π)cos(2(θ−θp)), where θis the angle from the flow direction and θpis the principal orientation direction. The mean energy of the velocity fluctuations in the flow direction is found to be higher than that in the gradient direction and the rotational energy, though the difference decreases as the area fraction increases, due to the efficient collisional transfer of energy between the three directions. The distributions of the translational and rotational velocity are found to be Gaussian distributions to a very good approximation. The equation of state for the pressure is calculated, and it is found to be remarkably independent of the coefficient of restitution. The pressure and dissipation rate show relatively little variation when scaled by the collision frequency for all the area fractions studied here, indicating that the collision frequency determines the momentum transport and energy dissipation even at the lowest area fractions studied here. The mean angular velocity of the particles is examined in some detail. It is found that the mean angular velocity is equal to half the vorticity at low area fractions, but the magnitude of the mean angular velocity systematically decreases to less than half the vorticity as the area fraction is increased, even though the stress tensor is symmetric.

This thesis presents a theoretical study of materials under high pressure using ab initio lattice dynamics based on density functional theory and density functional perturbation theory using both super-cell and linear response approach. Ab initio lattice dynamics using super-cell approach is applied to compare our theoretical predictions with experimental findings. Phonon dispersion curves of fcc α-γ cerium are calculated and compared with inelastic X-ray scattering data. Pressure dependency of phonon density of states in two cubic phases TiO2 allows us to assign the observed cubic phase in experiments to be of fluorite rather than pyrite structure. Dynamical stability of cotunnite TiO2 phase at low pressure can explain the observed quenching phenomena in experiments. Our calculated O2 vibron mode in both ε-ζ phases of solid oxygen supports the hypothesis that both phases are iso-structural. Hydrogen-dense materials attract great attention not only because they open a path to study phenomena related to metallization (superconductivity) of solid hydrogen but also because they are closely related to important industrial applications (hydrogen storage). Using linear response method, we find that metallic fcc-AlH3 is dynamically stabilized in the range of 72-106 GPa and can persist at ambient pressure if finite temperature effects are considered. For SiH4, we test dynamical stability, Raman spectra, zero point energy, and utilize GW calculations for self energy correction. We find that a metallic tetragonal phase of SiH4 can be assigned to the experimentally observed one. Our ab initio lattice dynamics calculations based on density functional perturbation theory predict that fcc-YH3 is a pressure-induced superconductor with a high transition temperature of 40 K at 17.7 GPa. With increasing pressure this material undergoes a superconductor-metal-superconductor transition and the underlying mechanism of this transition can simultaneously explains also the observed metal-insulator transition at 25 GPa in YH3-δ.

Fault localization is the process of realizing the true source of a failure from a set of collected failure notifications. Isolating failure recovery within the network optical domain is necessary to resolve alarm storm problems. The introduction of the monitoring trail (m-trail) has been proven to deliver better performance by employing monitoring resources in a form of optical trails - a monitoring framework that generalizes all the previously reported counterparts. In this dissertation, the m-trail design is explored and a focus is given to the analysis on using m-trails with established lightpaths to achieve fault localization. This process saves network resources by reducing the number of the m-trails required for fault localization and therefore the number of wavelengths used in the network. A novel approach based on Geographic Midpoint Technique, an adapted version of the Chinese Postman’s Problem (CPP) solution and an adapted version of the Traveling Salesman’s Problem (TSP) solution algorithms is introduced. The desirable features of network architectures and the enabling of innovative technologies for delivering future millimeter-waveband (mm-WB) Radio-over-Fiber (RoF) systems for wireless services integrated in a Dense Wavelength Division Multiplexing (DWDM) is proposed in this dissertation. For the conceptual illustration, a DWDM RoF system with channel spacing of 12.5 GHz is considered. The mm-WB Radio Frequency (RF) signal is obtained at each Optical Network Unit (ONU) by simultaneously using optical heterodyning photo detection between two optical carriers. The generated RF modulated signal has a frequency of 12.5 GHz. This RoF system is easy, cost-effective, resistant to laser phase noise and also reduces maintenance needs, in principle. A revision of related RoF network proposals and experiments is also included. A number of models for Passive Optical Networks (PON)/ RoF-PON that combine both innovative and existing ideas along with a number of solutions for m-trail design problem of these models are proposed. The comparison between these models uses the expected survivability function which proved that these models are liable to be implemented in the new and existing PON/ RoF-PON systems. This dissertation is followed by recommendation of possible directions for future research in this area.

No description available.

In response to the development of a next-generation networking (NGN) generalized multi-protocol label switching (GMPLS) technology is required for automatically switched optical network (ASON). Reconfigurable optical add-drop multiplexer (ROADM) is an indispensable device for the ASON, and the dense wavelength division multiplexed (DWDM) signals can be transmitted through the network under the management of the network administrator to configure dynamic customer needs and the desired quality of service (QoS). The ROADM can also increase the efficiency of utilizing the existing capacity of the optical fiber lines and can reduce or waive to set up additional optical fiber lines. This thesis studies a novel ROADM based on the arrayed waveguide grating (AWG) and the fiber Bragg grating (FBG) to overcome that the current ROADM cannot process that the input signal channels is greater than the wavelengths channels of AWG. Many types of ROADMs have been proposed and realized through different optical devices. Among these, hybrid optical circulator and FBG based ROADM is more attractive because of its low crosstalk and polarization insensitivity. However, it still suffers from many component counts and high insertion losses due to the use of many circulators and a multiplexer-demultiplexer pair. In this master thesis, we focus on demonstrating a novel ROADM and evaluating its crosstalk performance. It is found that the proposed ROADM has the advantage on extending the number of wavelength signal to make the system configurable and flexible.

Emerging 3-D applications and 3-D display technologies raise some transmission problems of the next-generation multimedia data. Multi-view Video Coding (MVC) is one of the challenging topics in this area, that is on its road for standardization via ISO MPEG. In this thesis, a 3-D geometry-based MVC approach is proposed and analyzed in terms of its compression performance. For this purpose, the overall study is partitioned into three preceding parts. The first step is dense depth estimation of a view from a fully calibrated multi-view set. The calibration information and smoothness assumptions are utilized for determining dense correspondences via a Markov Random Field (MRF) model, which is solved by Belief Propagation (BP) method. In the second part, the estimated dense depth maps are utilized for generating (predicting) arbitrary (other camera) views of a scene, that is known as novel view generation. A 3-D warping algorithm, which is followed by an occlusion-compatible hole-filling process, is implemented for this aim. In order to suppress the occlusion artifacts, an intermediate novel view generation method, which fuses two novel views generated from different source views, is developed. Finally, for the last part, dense depth estimation and intermediate novel view generation tools are utilized in the proposed H.264-based MVC scheme for the removal of the spatial redundancies between different views. The performance of the proposed approach is compared against the simulcast coding and a recent MVC proposal, which is expected to be the standard recommendation for MPEG in the near future. These results show that the geometric approaches in MVC can still be utilized, especially in certain 3-D applications, in addition to conventional temporal motion compensation techniques, although the rate-distortion performances of geometry-free approaches are quite superior.

In this thesis, novel approaches for dense depth field estimation and object segmentation from mono, stereo and multiple views are presented. In the first stage, a novel graph-theoretic color segmentation algorithm is proposed, in which the popular Normalized Cuts 59H[6] segmentation algorithm is improved with some modifications on its graph structure. Segmentation is obtained by the recursive partitioning of the weighted graph. The simulation results for the comparison of the proposed segmentation scheme with some well-known segmentation methods, such as Recursive Shortest Spanning Tree 60H[3] and Mean-Shift 61H[4] and the conventional Normalized Cuts, show clear improvements over these traditional methods. The proposed region-based approach is also utilized during the dense depth map estimation step, based on a novel modified plane- and angle-sweeping strategy. In the proposed dense depth estimation technique, the whole scene is assumed to be region-wise planar and 3D models of these plane patches are estimated by a greedy-search algorithm that also considers visibility constraint. In order to refine the depth maps and relax the planarity assumption of the scene, at the final step, two refinement techniques that are based on region splitting and pixel-based optimization via Belief Propagation 62H[32] are also applied. Finally, the image segmentation algorithm is extended to object segmentation in multi-view video with the additional depth and optical flow information. Optical flow estimation is obtained via two different methods, KLT tracker and region-based block matching and the comparisons between these methods are performed. The experimental results indicate an improvement for the segmentation performance by the usage of depth and motion information.

Integrated theoretical and experimental analysis is carried out in this work to investigate the fundamental failure mechanisms and flow patterns involved in the process of fluid injection into dense granular media. The experimental work is conducted with aqueous glycerin solutions, utilizing a novel setup based on a Hele-Shaw cell filled with dense dry sand. The two dimensional nature of the setup allows direct visualization and imaging analysis of the real-time fluid and grain kinematics. The experimental results reveal that the fluid flow patterns show a transition from simple radial flow to a ramified morphology while the granular media behaviors change from that of rigid porous media to localized failure that lead to development of fluid channels. Based on the failure/flow patterns, four distinct failure/flow regimes can be identified, namely, (i) a simple radial flow regime, (ii) an infiltration-dominated regime, (iii) a grain displacement-dominated regime, and (iv) a viscous fingering-dominated regime. These distinct failure/flow regimes emerge as a result of competition among various energy dissipation mechanisms, namely, viscous dissipation through infiltration, dissipation due to grain displacements, and viscous dissipation through flow in thin channels and can be classified based on the characteristic times associated with fluid injection, hydromechanical coupling and viscoelastoplasticity. The injection process is also analyzed numerically using the discrete element method (DEM) coupled with two fluid flow scheme, a fixed coarse grid scheme based on computational fluid dynamics (CFD) and a pore network modeling scheme. The numerical results from the two complementary methods reproduce phenomena consistent with the experimental observations and justify the concept of associating the displacement regimes with the partition among energy dissipation mechanisms. The research in this work, though fundamental in nature, will have direct impacts on many engineering problems in civil, environmental and petroleum engineering such as ground improvement, environmental remediation and reservoir stimulation.