Fundação Carlos Chagas Filho de Amparo a Pesquisa do Estado do Rio de Janeiro / Neste trabalho são utilizados a técnica baseada na propagação de ondas acústicas e o método de otimização estocástica Luus-Jaakola (LJ) para solucionar o problema inverso relacionado à identificação de danos em barras. São apresentados o algoritmo algébrico sequencial (AAS) e o algoritmo algébrico sequencial aperfeiçoado (AASA) que modelam o problema direto de propagação de ondas acústicas em uma barra. O AASA consiste nas modificações introduzidas no AAS. O uso do AASA resolve com vantagens o problema de identificação de danos com variações abruptas de impedância. Neste trabalho são obtidos, usando-se o AAS-LJ e o AASA-LJ, os resultados de identificação de cinco cenários de danos. Três deles com perfil suave de impedância acústica generalizada e os outros dois abruptos. Além disso, com o objetivo de simular sinais reais de um experimento, foram introduzidos variados níveis de ruído. Os resultados alcançados mostram que o uso do AASA-LJ na resolução de problemas de identificação de danos em barras é bastante promissor, superando o AAS-LJ para perfis abruptos de impedância. / In this work the techniques based on the wave propagation approach and the Luus- Jaakola optimization method to solve the inverse problem of damage identification in bars are applied. The sequential algebraic algorithm (SAA) and the improved sequential algebraic algorithm (ISAA) that model the direct problem of acoustic wave propagation in bars are presented. The ISAA consists on modifications of the SAA. The use of the ISAA solves with advantages the problem of damage identification when the generalized acoustical impedance variations are abrupt. In this work the results of identification of five damage scenarios are obtained using the SAA and the ISAA. Three of them are smooth impedance profiles and the other two are rough ones. Moreover, to simulate signals obtained experimentally, different noise levels were introduced. It is shown that using the ISAA-LJ in solving problems of damage identification in bars is quite promising, furnishing better results than the SAA-LJ, specially when the impedance profiles are abrupt.

As pontes de concreto armado são obras de arte de extrema importância para a infraestrutura de transportes do Brasil. Portanto sua inspeção e manutenção são atividades estratégicas. A inspeção visual, ensaios destrutivos e não destrutivos fornecem informações sobre a sua integridade estrutural e auxiliam na tomada de decisões relativas à necessidade de reparos e reforços. Entre os ensaios não destrutivos, avalia-se neste trabalho a aplicação da identificação modal estocástica na detecção de danos em pontes. A técnica baseia-se na medição das vibrações ambientais da estrutura, aquelas que ocorrem durante seu uso, identificação de suas propriedades modais, comparação com as propriedades modais da estrutura íntegra e consequente detecção de danos. Diferentemente da análise dinâmica experimental clássica, na identificação modal estocástica as ações dinâmicas não são medidas e nem controladas durante o ensaio. Por este motivo foram adotadas técnicas de identificação modal baseadas apenas nas vibrações medidas em alguns pontos da estrutura, funções de densidade espectral de potência e transmissibilidades de vibrações entre os pontos. Desta forma as frequências naturais e modos de vibração experimentais puderam ser precisamente identificados em modelos íntegros e danificados de pontes em escala reduzida. Em cada modelo, uma danificação foi imposta em uma de suas longarinas no meio do vão ou no segundo quarto de vão. Após a realização dos ensaios dinâmicos nas condições íntegra e danificada, duas técnicas de identificação de danos foram utilizadas: Diferença de Curvatura Modal (DCM) e Índice de Dano (ID). Ambas as técnicas tiveram sucesso na detecção de danos nos modelos de pontes avaliados. / Reinforced concrete bridges are extremely important elements of Brazilian transportation infrastructure. Consequently their inspection and maintenance are strategic activities. Visual inspection, destructive or nondestructive tests offer relevant information on their structural integrity and support the decision on the need of retrofitting or strengthening. Among existing types of nondestructive tests, this work focuses on the application of stochastic modal identification in damage detection of bridges. This technique is based on the measurement of environmental vibrations that occur during normal operation of the structure, modal identification, comparison of modal properties between damaged and undamaged bridge and finally damage detection. Opposed to classical dynamic experimental analysis, in stochastic modal identification the loads are not measured or known during the test. For this reason modal identification was only based in vibrations measured in selected points of the structure, power spectral density functions and vibration transmissibilities between these points. With this method natural frequencies and experimental modal shapes could be precisely identified in damaged and undamaged small scale models of bridges. The damage was induced in the middle of the span or in the second quarter of the span in one of the girders. After dynamic testing in undamaged and damaged conditions two damage identification techniques were used: Modal Curvature Difference (MCD) and Damage Index (ID). Both techniques detected successfully the damages imposed to the bridge models.

Uncertainties are present in the inverse analysis of damage identification with respect to the given measurements, mainly the modelling uncertainties and the measurement uncertainties. Modelling uncertainties occur due to constructing a representative model of the real structure through finite element modelling, and representing damage in the real structures through changes in material parameters of the finite element model (assuming smeared crack approach). Measurement uncertainties are always present in the measurements despite the accuracy with which the measurements are measured or the precision of the instruments used for the measurement. The modelling errors in the finite element model are assumed to be encompassed in the updated uncertain parameters of the finite element model, given the uncertainties in the measurements and in the prior uncertainties of the parameters. The uncertainties in the direct measurement data are propagated to the estimated output data. Empirical models from codal provisions and standard recommendations are normally used for prediction of long-time deformations in concrete structures. Uncertainties are also present in the creep and shrinkage models, in the parameters of these models, in the shrinkage and creep mechanisms, in the environmental conditions, and in the in-situ measurements. All these uncertainties are needed to be considered in the damage identification and prediction of long-time deformations in concrete structures. In the context of modelling uncertainty, uncertainties can be categorized into aleatory or epistemic uncertainty. Aleatory uncertainty deals with the irresolvable indeterminacy about how the uncertain variable will evolve over time, whereas epistemic uncertainty deals with lack of knowledge. In the field of damage detection and prediction of long time deformations, aleatory uncertainty is modeled through probabilistic analysis, whereas epistemic uncertainty can be modeled through (1) Interval analysis (2) Ellipsoidal modeling (3) Fuzzy analysis (4) Dempster-Shafer evidence theory or (5) Imprecise probability. Many a times it is di cult to determine whether a particular uncertainty is to be considered as an aleatory or as an epistemic uncertainty, and the model builder makes the distinction. The model builder makes the choice based on the general state of scientific knowledge, on the practical need for limiting the model sophistication to a significant engineering importance, and on the errors associated with the measurements. Measurement uncertainty can be stated as the dispersion of real data resulting from systematic error (instrumental error, environmental error, observational error, human error, drift in measurement, measurement of wrong quantity) and random error (all errors apart from systematic errors). Most of instrumental errors given by the manufacturers are in terms of plus minus ranges and can be better represented through interval bounds. The vagueness involved in the representation of human error, observational error, and drift in measurement can be represented through interval bounds. Deliberate measurement of wrong quantity through cheaper and more convenient measurement units can lead to bad quality data. Quality of data can be better handled through interval analysis, with good quality data having narrow width of interval bounds and bad quality data having wide interval bounds. The environmental error, the electronic noise coming from transmitting the data and the random errors can be represented through probability distribution functions. A major part of the measurement uncertainties is better represented through interval bounds and the other part, is better represented through probability distributions. The uncertainties in the direct measurement data are propagated to the estimated output data (in damage identification techniques, the damaged parameters, and in the long-time deformation, the uncertain parameters of the deformation models, which are then used for the prediction of long-time deformations). Uncertainty based damage identification techniques and long-time deformations in concrete structures require further studies, when the measurement uncertainties are expressed through interval bounds only, or through both interval and probability using imprecise techniques. The thesis is divided into six chapters. Chapter 1 provides a review of existing literature on uncertainty based techniques for damage identification and prediction of long-time deformations in concrete structures. A brief review of uncertainty based methods for engineering applications is made, with special highlight to the need of interval analysis and imprecise probability for modeling uncertainties in the damage identification techniques. The review identifies that the available techniques for damage identification, where the uncertainties in the measurements and in the structural and material parameters are expressed in terms of interval bounds, lack e ciency, when the size of the damaged parameter vector is large. Studies on estimating the uncertainties in the damage parameters when the uncertainties in the measurements are expressed through imprecise probability analysis, are also identified as problems that will be considered in this thesis. Also the need for estimating the short-term time period, which in turn helps in accurate prediction of long-time deformations in concrete structures, along with a cost effective and easy to use system of measuring the existing prestress forces at various time instances in the short-time period is noted. The review identifies that most of modelers and analysts have been inclined to select a single simulation model for the long-time deformations resulted from creep, shrinkage and relaxation, rather than take all the possibilities into consideration, where the model selection is made based on the hardly realistic assumption that we can certainly select a correct, and the lack of confidence associated with model selection brings about the uncertainty that resides in a given model set. The need for a single best model out of all the available deformation models is needed to be developed, when uncertainties are present in the models, in the measurements and in the parameters of each models is also identified as a problem that will be considered in this thesis. In Chapter 2, an algorithm is proposed adapting the existing modified Metropolis Hastings algorithm for estimating the posterior probability of the damage indices as well as the posterior probability of the bounds of the interval parameters, when the measurements are given in terms of interval bounds. A damage index is defined for each element of the finite element model considering the parameters of each element are intervals. Methods are developed for evaluating response bounds in the finite element software ABAQUS, when the parameters of the finite element model are intervals. Illustrative examples include reinforced concrete beams with three damage scenarios mainly (i) loss of stiffness, (ii) loss of mass, and (iii) loss of bond between concrete and reinforcement steel, that have been tested in our laboratory. Comparison of the prediction from the proposed method with those obtained from Bayesian analysis and interval optimization technique show improved accuracy and computational efficiency, in addition to better representation of measurement uncertainties through interval bounds. Imprecise probability based methods are developed in Chapter 3, for damage identifi cation using finite element model updating in concrete structures, when the uncertainties in the measurements and parameters are imprecisely defined. Bayesian analysis using Metropolis Hastings algorithm for parameter estimation is generalized to incorporate the imprecision present in the prior distribution, in the likelihood function, and in the measured responses. Three different cases are considered (i) imprecision is present in the prior distribution and in the measurements only, (ii) imprecision is present in the parameters of the finite element model and in the measurement only, and (iii) imprecision is present in the prior distribution, in the parameters of the finite element model, and in the measurements. Illustrative examples include reinforced concrete beams and prestressed concrete beams tested in our laboratory. In Chapter 4, a steel frame is designed to measure the existing prestressing force in the concrete beams and slabs when embedded inside the concrete members. The steel frame is designed to work on the principles of a vibrating wire strain gauge and is referred to as a vibrating beam strain gauge (VBSG). The existing strain in the VBSG is evaluated using both frequency data on the stretched member and static strain corresponding to a fixed static load, measured using electrical strain gauges. The crack reopening load method is used to compute the existing prestressing force in the concrete members and is then compared with the existing prestressing force obtained from the VBSG at that section. Digital image correlation based surface deformation and change in neutral axis monitored by putting electrical strain gauges across the cross section, are used to compute the crack reopening load accurately. Long-time deformations in concrete structures are estimated in Chapter 5, using short-time measurements of deformation responses when uncertainties are present in the measurements, in the deformation models and in the parameters of the deformation models. The short-time period is defined as the least time up to which if measurements are made available, the measurements will be enough for estimating the parameters of the deformation models in predicting the long time deformations. The short-time period is evaluated using stochastic simulations where all the parameters of the deformation models are defined as random variables. The existing deformation models are empirical in nature and are developed based on an arbitrary selection of experimental data sets among all the available data sets, and each model contains some information about the deformation patterns in concrete structures. Uncertainty based model averaging is performed for obtaining the single best model for predicting the long-time deformation in concrete structures. Three types of uncertainty models are considered namely, probability models, interval models and imprecise probability models. Illustrative examples consider experiments in the Northwestern University database available in the literature and prestressed concrete beams and slabs cast in our laboratory for prediction of long-time prestress losses. A summary of contributions made in this thesis, together with a few suggestions for future research, are presented in Chapter 6. Finally the references that were studies are listed.

The past 30 years have witnessed major developments in vibration based damage detection and identification, also collectively referred to as damage diagnosis. Moreover, the past 10 years have seen a rapid increase in the amount of research related to Structural Health Monitoring (SHM) as quantified by the significant escalation in papers published on this subject. Thus, the increased interest in this engineering field and its associated potential constitute the main motive for this thesis. The goal of the thesis is the development and introduction of novel advanced functional and sequential statistical time series methods for vibration based damage diagnosis and SHM. After the introduction of the first chapter, Chapter II provides an experimental assessment and comparison of vibration based statistical time series methods for Structural Health Monitoring (SHM) via their application on a lightweight aluminum truss structure and a laboratory scale aircraft skeleton structure. A concise overview of the main non-parametric and parametric methods is presented, including response-only and excitation-response schemes. Damage detection and identification are based on univariate (scalar) versions of the methods, while both scalar (univariate) and vector (multivariate) schemes are considered. The methods' effectiveness for both damage detection and identification is assessed via various test cases corresponding to different damage scenarios, multiple experiments and various sensor locations on the considered structures. The results of the chapter confirm the high potential and effectiveness of vibration based statistical time series methods for SHM. Chapter III investigates the identification of stochastic systems under multiple operating conditions via Vector-dependent Functionally Pooled (VFP) models. In many applications a system operates under a variety of operating conditions (for instance operating temperature, humidity, damage location, damage magnitude and so on) which affect its dynamics, with each condition kept constant for a single commission cycle. Typical examples include mechanical structures operating under different environmental conditions, aircrafts under different flight conditions (altitude, velocity etc.), structures under different structural health states (various damage locations and magnitudes). In this way, damage location and magnitude may be considered as parameters that affect the operating conditions and as a result the structural dynamics. This chapter's work is based on the novel Functional Pooling (FP) framework, which has been recently introduced by the Stochastic Mechanical Systems \& Automation (SMSA) group of the Mechanical Engineering and Aeronautics Department of University of Patras. The main characteristic of Functionally Pooled (FP) models is that their model parameters and innovations sequence depend functionally on the operating parameters, and are projected on appropriate functional subspaces spanned by mutually independent basis functions. Thus, the fourth chapter of the thesis addresses the problem of identifying a globally valid and parsimonious stochastic system model based on input-output data records obtained under a sample of operating conditions characterized by more than one parameters. Hence, models that include a vector characterization of the operating condition are postulated. The problem is tackled within the novel FP framework that postulates proper global discrete-time linear time series models of the ARX and ARMAX types, data pooling techniques, and statistical parameter estimation. Corresponding Vector-dependent Functionally Pooled (VFP) ARX and ARMAX models are postulated, and proper estimators of the Least Squares (LS), Maximum Likelihood (ML), and Prediction Error (PE) types are developed. Model structure estimation is achieved via customary criteria (Bayesian Information Criterion) and a novel Genetic Algorithm (GA) based procedure. The strong consistency of the VFP-ARX least squares and maximum likelihood estimators is established, while the effectiveness of the complete estimation and identification method is demonstrated via two Monte Carlo studies. Based on the postulated VFP parametrization a vibration based statistical time series method that is capable of effective damage detection, precise localization, and magnitude estimation within a unified stochastic framework is introduced in Chapter IV. The method constitutes an important generalization of the recently introduced Functional Model Based Method (FMBM) in that it allows, for the first time in the statistical time series methods context, for complete and precise damage localization on continuous structural topologies. More precisely, the proposed method can accurately localize damage anywhere on properly defined continuous topologies on the structure, instead of pre-defined specific locations. Estimator uncertainties are taken into account, and uncertainty ellipsoids are provided for the damage location and magnitude. To achieve its goal, the method is based on the extended class of Vector-dependent Functionally Pooled (VFP) models, which are characterized by parameters that depend on both damage magnitude and location, as well as on proper statistical estimation and decision making schemes. The method is validated and its effectiveness is experimentally assessed via its application to damage detection, precise localization, and magnitude estimation on a prototype GARTEUR-type laboratory scale aircraft skeleton structure. The damage scenarios considered consist of varying size small masses attached to various continuous topologies on the structure. The method is shown to achieve effective damage detection, precise localization, and magnitude estimation based on even a single pair of measured excitation-response signals. Chapter V presents the introduction and experimental assessment of a sequential statistical time series method for vibration based SHM capable of achieving effective, robust and early damage detection, identification and quantification under uncertainties. The method is based on a combination of binary and multihypothesis versions of the statistically optimal Sequential Probability Ratio Test (SPRT), which employs the residual sequences obtained through a stochastic time series model of the healthy structure. In this work the full list of properties and capabilities of the SPRT are for the first time presented and explored in the context of vibration based damage detection, identification and quantification. The method is shown to achieve effective and robust damage detection, identification and quantification based on predetermined statistical hypothesis sampling plans, which are both analytically and experimentally compared and assessed. The method's performance is determined a priori via the use of the analytical expressions of the Operating Characteristic (OC) and Average Sample Number (ASN) functions in combination with baseline data records, while it requires on average a minimum number of samples in order to reach a decision compared to most powerful Fixed Sample Size (FSS) tests. The effectiveness of the proposed method is validated and experimentally assessed via its application on a lightweight aluminum truss structure, while the obtained results for three distinct vibration measurement positions prove the method's ability to operate based even on a single pair of measured excitation-response signals. Finally, Chapter VI contains the concluding remarks and future perspectives of the thesis. / Κατά τη διάρκεια των τελευταίων 30 ετών έχει σημειωθεί σημαντική ανάπτυξη στο πεδίο της ανίχνευσης και αναγνώρισης βλαβών, το οποίο αναφέρεται συνολικά και σαν διάγνωση βλαβών. Επίσης, κατά την τελευταία δεκαετία έχει σημειωθεί σημαντική πρόοδος στον τομέα της παρακολούθησης της υγείας (δομικής ακεραιότητας) κατασκευών. Στόχος αυτής της διατριβής είναι η ανάπτυξη εξελιγμένων συναρτησιακών και επαναληπτικών μεθόδων χρονοσειρών για τη διάγνωση βλαβών και την παρακολούθηση της υγείας κατασκευών υπό ταλάντωση. Αρχικά γίνεται η πειραματική αποτίμηση και κριτική σύγκριση των σημαντικότερων στατιστικών μεθόδων χρονοσειρών επί τη βάσει της εφαρμογής τους σε πρότυπες εργαστηριακές κατασκευές. Εφαρμόζονται μη-παραμετρικές και παραμετρικές μέθοδοι που βασίζονται σε ταλαντωτικά σήματα διέγερσης και απόκρισης των κατασκευών. Στη συνέχεια αναπτύσσονται στοχαστικά συναρτησιακά μοντέλα για την στοχαστική αναγνώριση κατασκευών υπό πολλαπλές συνθήκες λειτουργίας. Τα μοντέλα αυτά χρησιμοποιούνται για την αναπαράσταση κατασκευών σε διάφορες καταστάσεις βλάβης (θέση και μέγεθος βλάβης), ώστε να είναι δυνατή η συνολική μοντελοποίσή τους για όλες τις συνθήκες λειτουργίας. Τα μοντέλα αυτά αποτελούν τη βάση στην οποία αναπτύσσεται μια συναρτησιακή μέθοδος η οποία είναι ικανή να αντιμετωπίσει συνολικά και ενιαία το πρόβλημα της ανίχνευσης, εντοπισμού και εκτίμησης βλαβών σε κατασκευές. Η πειραματική αποτίμηση της μεθόδου γίνεται με πολλαπλά πειράματα σε εργαστηριακό σκελετό αεροσκάφους. Στο τελευταίο κεφάλαιο της διατριβής προτείνεται μια καινοτόμος στατιστική επαναληπτική μέθοδο για την παρακολούθηση της υγείας κατασκευών. Η μέθοδος κρίνεται αποτελεσματική υπό καθεστώς λειτουργικών αβεβαιοτήτων, καθώς χρησιμοποιεί επαναληπτικά και στατιστικά τεστ πολλαπλών υποθέσεων. Η αποτίμηση της μεθόδου γίνεται με πολλαπλά εργαστηριακά πειράματα, ενώ η μέθοδος κρίνεται ικανή να λειτουργήσει με τη χρήση ενός ζεύγους ταλαντωτικών σημάτων διέγερσης-απόκρισης.

Fundação Carlos Chagas Filho de Amparo a Pesquisa do Estado do Rio de Janeiro / O presente trabalho aborda o problema de identificação de danos em uma estrutura a partir de sua resposta impulsiva. No modelo adotado, a integridade estrutural é continuamente descrita por um parâmetro de coesão. Sendo assim, o Modelo de Elementos Finitos (MEF) é utilizado para discretizar tanto o campo de deslocamentos, quanto o campo de coesão. O problema de identificação de danos é, então, definido como um problema de otimização, cujo objetivo é minimizar, em relação a um vetor de parâmetros nodais de coesão, um funcional definido a partir da diferença entre a resposta impulsiva experimental e a correspondente resposta prevista por um MEF da estrutura. A identificação de danos estruturais baseadas no domínio do tempo apresenta como vantagens a aplicabilidade em sistemas lineares e/ou com elevados níveis de amortecimento, além de apresentar uma elevada sensibilidade à presença de pequenos danos. Estudos numéricos foram realizados considerando-se um modelo de viga de Euler-Bernoulli simplesmente apoiada. Para a determinação do posicionamento ótimo do sensor de deslocamento e do número de pontos da resposta impulsiva, a serem utilizados no processo de identificação de danos, foi considerado o Projeto Ótimo de Experimentos. A posição do sensor e o número de pontos foram determinados segundo o critério D-ótimo. Outros critérios complementares foram também analisados. Uma análise da sensibilidade foi realizada com o intuito de identificar as regiões da estrutura onde a resposta é mais sensível à presença de um dano em um estágio inicial. Para a resolução do problema inverso de identificação de danos foram considerados os métodos de otimização Evolução Diferencial e Levenberg-Marquardt. Simulações numéricas, considerando-se dados corrompidos com ruído aditivo, foram realizadas com o intuito de avaliar a potencialidade da metodologia de identificação de danos, assim como a influência da posição do sensor e do número de dados considerados no processo de identificação. Com os resultados obtidos, percebe-se que o Projeto Ótimo de Experimentos é de fundamental importância para a identificação de danos. / The present work deals with the damage identification problem in mechanical structures from their impulse response. In the adopted model, the structural integrity is continually described by a cohesion parameter and the finite element model (FEM) is used to spatially discretize both the displacement and cohesion fields. The damage identification problem is then posed as an optimization one, whose objective is to minimize, with respect to the vector of nodal cohesion parameters, a functional based on the difference between the experimentally obtained impulse response and the corresponding one predicted by an FEM of the structure. The damage identification problem built on the time domain presents some advantages, as the applicability in linear systems with high levels of damping an/or closed spaced modes, and in nonlinear systems. Besides, the time domain approaches present high sensitivities to the presence of small damages. Numerical studies were carried out considering a simply supported Euler-Bernoulli beam. Optimal experiment design techniques were considered with the aim at determining the optimal position of the displacement sensor and also the number of points of the impulse response to be considered in the identification process. The Differential Evolution optimization method and the Levenberg-Marquardt method were considered to solve the inverse problem of damage identification. Numerical analysis were carried out in order to assess the influence, on the identification results, of noise in the synthetic experimental data, of the sensor position, and of the number of points retained in the impulse response. The presented results shown the potentiality of the proposed damage identification approach and also the importance of the optimal experiment design for the quality of the identification. al importance for the identification of damage.

Fundação Carlos Chagas Filho de Amparo a Pesquisa do Estado do Rio de Janeiro / O presente trabalho aborda o problema de identificação de danos em uma estrutura a partir de sua resposta impulsiva. No modelo adotado, a integridade estrutural é continuamente descrita por um parâmetro de coesão. Sendo assim, o Modelo de Elementos Finitos (MEF) é utilizado para discretizar tanto o campo de deslocamentos, quanto o campo de coesão. O problema de identificação de danos é, então, definido como um problema de otimização, cujo objetivo é minimizar, em relação a um vetor de parâmetros nodais de coesão, um funcional definido a partir da diferença entre a resposta impulsiva experimental e a correspondente resposta prevista por um MEF da estrutura. A identificação de danos estruturais baseadas no domínio do tempo apresenta como vantagens a aplicabilidade em sistemas lineares e/ou com elevados níveis de amortecimento, além de apresentar uma elevada sensibilidade à presença de pequenos danos. Estudos numéricos foram realizados considerando-se um modelo de viga de Euler-Bernoulli simplesmente apoiada. Para a determinação do posicionamento ótimo do sensor de deslocamento e do número de pontos da resposta impulsiva, a serem utilizados no processo de identificação de danos, foi considerado o Projeto Ótimo de Experimentos. A posição do sensor e o número de pontos foram determinados segundo o critério D-ótimo. Outros critérios complementares foram também analisados. Uma análise da sensibilidade foi realizada com o intuito de identificar as regiões da estrutura onde a resposta é mais sensível à presença de um dano em um estágio inicial. Para a resolução do problema inverso de identificação de danos foram considerados os métodos de otimização Evolução Diferencial e Levenberg-Marquardt. Simulações numéricas, considerando-se dados corrompidos com ruído aditivo, foram realizadas com o intuito de avaliar a potencialidade da metodologia de identificação de danos, assim como a influência da posição do sensor e do número de dados considerados no processo de identificação. Com os resultados obtidos, percebe-se que o Projeto Ótimo de Experimentos é de fundamental importância para a identificação de danos. / The present work deals with the damage identification problem in mechanical structures from their impulse response. In the adopted model, the structural integrity is continually described by a cohesion parameter and the finite element model (FEM) is used to spatially discretize both the displacement and cohesion fields. The damage identification problem is then posed as an optimization one, whose objective is to minimize, with respect to the vector of nodal cohesion parameters, a functional based on the difference between the experimentally obtained impulse response and the corresponding one predicted by an FEM of the structure. The damage identification problem built on the time domain presents some advantages, as the applicability in linear systems with high levels of damping an/or closed spaced modes, and in nonlinear systems. Besides, the time domain approaches present high sensitivities to the presence of small damages. Numerical studies were carried out considering a simply supported Euler-Bernoulli beam. Optimal experiment design techniques were considered with the aim at determining the optimal position of the displacement sensor and also the number of points of the impulse response to be considered in the identification process. The Differential Evolution optimization method and the Levenberg-Marquardt method were considered to solve the inverse problem of damage identification. Numerical analysis were carried out in order to assess the influence, on the identification results, of noise in the synthetic experimental data, of the sensor position, and of the number of points retained in the impulse response. The presented results shown the potentiality of the proposed damage identification approach and also the importance of the optimal experiment design for the quality of the identification. al importance for the identification of damage.