Estimates of the time-varying standard deviation of the surface EMG signal (EMGσ) are extensively used in the field of EMG-torque estimation. The use of a whitening filter can substantially improve the accuracy of EMGσ estimation by removing the signal correlation and increasing the statistical bandwidth. However, a subject-specific whitening filter which is calibrated to each subject, is quite complex and inconvenient. To solve this problem, we first calibrated a 60th-order “Universal” FIR whitening filter by using the ensemble mean of the inverse of the square root of the power spectral density (PSD) of the noise-free EMG signal. Pre-existing data from elbow contraction of 64 subjects, providing 512 recording trials were used. The test error on an EMG-torque task based on the “Universal” FIR whitening filter had a mean error of 4.80% maximum voluntary contraction (MVC) with a standard deviation of 2.03% MVC. Meanwhile the subject-specific whitening filter had performance of 4.84±1.98% MVC (both have a whitening band limit at 600 Hz). These two methods had no statistical difference. Furthermore, a 2nd-order IIR whitening filter was designed based on the magnitude response of the “Universal” FIR whitening filter, via the differential evolution algorithm. The performance of this IIR whitening filter was very similar to the FIR filter, with a performance of 4.81±2.12% MVC. A statistical test showed that these two methods had no significant difference either. Additionally, a complete theory of EMG in additive measured noise contraction modeling is described. Results show that subtracting the variance of whitened noise by computing the root difference of the square (RDS) is the correct way to remove noise from the EMG signal.

Nowadays modern electric power systems consist of large-scale and highly complex interconnected transmission systems, thus transmission expansion planning (TEP) is now a significant power system optimisation problem. The TEP problem is a large-scale, complex and nonlinear combinatorial problem of mixed integer nature where the number of candidate solutions to be evaluated increases exponentially with system size. The accurate solution of the TEP problem is essential in order to plan power systems in both an economic and efficient manner. Therefore, applied optimisation methods should be sufficiently efficient when solving such problems. In recent years a number of computational techniques have been proposed to solve this efficiency issue. Such methods include algorithms inspired by observations of natural phenomena for solving complex combinatorial optimisation problems. These algorithms have been successfully applied to a wide variety of electrical power system optimisation problems. In recent years differential evolution algorithm (DEA) procedures have been attracting significant attention from the researchers as such procedures have been found to be extremely effective in solving power system optimisation problems. The aim of this research is to develop and apply a novel DEA procedure directly to a DC power flow based model in order to efficiently solve the TEP problem. In this thesis, the TEP problem has been investigated in both static and dynamic form. In addition, two cases of the static TEP problem, with and without generation resizing, have also been investigated. The proposed method has achieved solutions with good accuracy, stable convergence characteristics, simple implementation and satisfactory computation time. The analyses have been performed within the mathematical programming environment of MATLAB using both DEA and conventional genetic algorithm (CGA) procedures and a detailed comparison has also been presented. Finally, the sensitivity of DEA control parameters has also been investigated.

The increasing penetration of distributed generation, responsive loads and emerging smart metering technologies will continue the transformation of distribution systems from passive to active network conditions. In such active networks, State Estimation (SE) tools will be essential in order to enable extensive monitoring and enhanced control technologies. In future distribution management systems, the novel electrical power distribution system SE requires development in a scalable manner in order to accommodate small to massive size networks, be operable with limited real time measurements and a restricted time frame. Furthermore, a significant phase of new sensor deployment is inevitable to enable distribution system SE, since present-day distribution networks lack the required level of measurement and instrumentation. In the above context, the research presented in this thesis investigates five SE optimization solution methods with various case studies related to expected scenarios of future distribution networks to determine their suitability. Hachtel's Augmented Matrix method is proposed and developed as potential SE optimizer for distribution systems due to its potential performance characteristics with regard to accuracy and convergence. Differential Evolution Algorithm (DEA) and Overlapping Zone Approach (OZA) are investigated to achieve scalability of SE tools; followed by which the network division based OZA is proposed and developed. An OZA requiring additional measurements is also proposed to provide a feasible solution for voltage estimation at a reduced computation cost. Realising the requirement of additional measurements deployment to enable distribution system SE, the development of a novel meter placement algorithm that provides economical and feasible solutions is demonstrated. The algorithm is strongly focused on reducing the voltage estimation errors and is capable of reducing the error below desired threshold with limited measurements. The scalable SE solution and meter placement algorithm are applied on a multi-processor system in order to examine effective reduction of computation time. Significant improvement in computation time is observed in both cases by dividing the problem into smaller segments. However, it is important to note that enhanced network division reduces computation time further at the cost of accuracy of estimation. Different networks including both idealised (16, 77, 356 and 711 node UKGDS) and real (40 and 43 node EG) distribution network data are used as appropriate to the requirement of the applications throughout this thesis.

Feeder reconfiguration is performed by changing the open/close status of two types of switches: normally open tie switches and normally closed sectionalizing switches. A whole feeder or part of a feeder may be served from another feeder by closing a tie switch linking the two while an appropriate sectionalizing switch must be opened to maintain the radial structure of the system. Feeder reconfiguration is mainly aiming to reduce the system overall power losses and improve voltage profile. In this dissertation, several approaches have been proposed to reconfigure the radial distribution networks including the potential impact of integrating Distributed Energy Resources (DER) into the grid. These approaches provide a Fast-Genetic Algorithm “FGA” in which the size and convergence speed is improved compared to the conventional genetic algorithm. The size of the population matrix is also smaller because of the simple way of constructing the meshed network. Additionally, FGA deals with integer variable instead of a binary one, which makes FGA a unique method. The number of the mesh/loop is based on the number of tie switches in a particular network. The validity of the proposed FGA is investigated by comparing the obtained results with the one obtained from the most recent approaches. The second the approach is the implementation of the Differential Evolution (DE) algorithm. DE is a population-based method using three operators including crossover, mutation, and selection. It differs from GA in that genetic algorithms rely on crossover while DE relies on mutation. Mutation is based on the differences between randomly sampled pairs of solutions in the population. DE has three advantages: the ability to find the global optimal result regardless of the initial values, fast convergence, and requirement of a few control parameters. DE is a well-known and straightforward population-based probabilistic approach for comprehensive optimization. In distribution systems, if a utility company has the right to control the location and size of distributed generations, then the location and size of DGs may be determined based on some optimization methods. This research provides a promising approach to finding the optimal size and location of the planned DER units using the proposed DE algorithm. DGs location is obtained using the sensitivity of power losses with respect to real power injection at each bus. Then the most sensitive bus is selected for installing the DG unit. Because the integration of the DG adds positive real power injections, the optimal location is the one with the most negative sensitivity in order to get the largest power loss reduction. Finally, after the location is specified, the proposed Differential Evolution Algorithm (DEA) is used to obtain the optimal size of the DG unit. Only the feasible solutions that satisfy all the constraints are considered. The objective of installing DG units to the distribution network is to reduce the system losses and enhance the network voltage profile. Nowadays, these renewable DGs are required to equip with reactive power devices (such as static VAR compensators, capacitor banks, etc.), to provide reactive power as well as to control the voltage at their terminal bus. DGs have various technical benefits such as voltage profile improvement, relief in feeder loading, power loss minimization, stability improvement, and voltage deviation mitigation. The distributed generation may not achieve its full potential of benefits if placed at any random location in the system. It is necessary to investigate and determine the optimum location and size of the DG. Most distribution networks are radial in nature with limited short-circuit capacity. Therefore, there is a limit to which power can be injected into the distribution network without compromising the power quality and the system stability. This research is aiming to investigate this by applying DG technologies to the grid and keeping the system voltage within a defined boundary [0.95 - 1.05 p.u]. The requirements specified in IEEE Standard 1547 are considered. This research considers four objectives related to minimization of the system power loss, minimization of the deviations of the nodes voltage, minimization of branch current constraint violation, and minimization of feeder’s currents imbalance. The research formulates the problem as a multi-objective problem. The effectiveness of the proposed methods is demonstrated on different revised IEEE test systems including 16 and 33-bus radial distribution system.

Cette thèse s’intéresse à l’étude d’une structure de moteur électrique à aimants permanents afin de réduire l’utilisation d’aimants à basse de terres rares et qui puisse être utilisée pour des applications industrielles. Il est montré dans la première partie de ce travail de recherche que la machine synchro-réluctante à aimants permanents est une bonne solution potentielle. Une analyse paramétrique est alors réalisée en utilisant une modélisation par éléments finis pour mettre en évidence les particularités de son comportement électromagnétique. Puis, une modélisation analytique multi-physique innovante du système convertisseur-moteur est détaillée dans le but de calculer les performances de ce dernier en un temps raisonnable. Les modèles multi-physiques présentés dans ces travaux concernent l’onduleur et le moteur. Ils intègrent les aspects électromagnétique, électrique, énergétique, thermique, mécanique et technico-économique. Le modèle multi-physique de la machine électrique est validé par comparaison à des résultats d’essais sur un prototype. Le modèle du système qui a été développé est ensuite utilisé dans une procédure de conception par optimisation de systèmes d’entrainements. Pour cela, une démarche d’optimisation originale est présentée pour le dimensionnement conjoint de deux applications en imposant la contrainte d’utiliser la même tôlerie magnétique. Il s’agit d’une part d’une application à vitesse fixe et d’autre part d’une application de type traction électrique. La méthode d’optimisation employée est à évolution différentielle. Les résultats des optimisations réalisées permettent de déterminer des conceptions optimales ou des compromis optimaux aux sens de Pareto qui répondent aux deux applications visées. Finalement, cette thèse a permis de positionner la machine synchro-réluctante à aimants permanents parmi les structures de machines à fort potentiel industriel. / This thesis focuses on the study of a structure of permanent magnet electric motor which reduces the amount used of permanent magnets composed of rare earths and which can be used in industrial applications. In the first part of the research work, it is shown that the permanent magnet assisted synchronous reluctance machine is a good alternative. A parametric analyse is realised using a finite element modelling in order to highlight the peculiarities of its electromagnetic behaviour. Then, an innovative multi-physic analytical modelling for the system inverter-motor is detailed in order to evaluate its performances in a reasonable computational time. The multi-physic models presented in this work concern the inverter and motor. They integrate the electromagnetic, electric, energetic, thermal, mechanic, and techno-economic aspects. The multi-physical model of the electric machine is validated by means of tests carried out on a prototype. The model of the system which has been developed is used in a design procedure by optimization of drive systems. For this purpose, an original optimization approach is presented for the simultaneous design of two applications by imposing the constraint of using the same magnetic lamination. On one hand it is an application of fixed speed and on the other hand an application of electric traction. The optimization method used is a type of differential evolution optimization. The results of the optimizations realised determine the optimal designs or the optimal compromise with Pareto front which deal with both applications. Finally, this thesis has placed the permanent magnet assisted synchronous reluctance machine among structures of machines with great industrial potential.

Cette thèse s’intéresse à l’étude d’une structure de moteur électrique à aimants permanents afin de réduire l’utilisation d’aimants à basse de terres rares et qui puisse être utilisée pour des applications industrielles. Il est montré dans la première partie de ce travail de recherche que la machine synchro-réluctante à aimants permanents est une bonne solution potentielle. Une analyse paramétrique est alors réalisée en utilisant une modélisation par éléments finis pour mettre en évidence les particularités de son comportement électromagnétique. Puis, une modélisation analytique multi-physique innovante du système convertisseur-moteur est détaillée dans le but de calculer les performances de ce dernier en un temps raisonnable. Les modèles multi-physiques présentés dans ces travaux concernent l’onduleur et le moteur. Ils intègrent les aspects électromagnétique, électrique, énergétique, thermique, mécanique et technico-économique. Le modèle multi-physique de la machine électrique est validé par comparaison à des résultats d’essais sur un prototype. Le modèle du système qui a été développé est ensuite utilisé dans une procédure de conception par optimisation de systèmes d’entrainements. Pour cela, une démarche d’optimisation originale est présentée pour le dimensionnement conjoint de deux applications en imposant la contrainte d’utiliser la même tôlerie magnétique. Il s’agit d’une part d’une application à vitesse fixe et d’autre part d’une application de type traction électrique. La méthode d’optimisation employée est à évolution différentielle. Les résultats des optimisations réalisées permettent de déterminer des conceptions optimales ou des compromis optimaux aux sens de Pareto qui répondent aux deux applications visées. Finalement, cette thèse a permis de positionner la machine synchro-réluctante à aimants permanents parmi les structures de machines à fort potentiel industriel. / This thesis focuses on the study of a structure of permanent magnet electric motor which reduces the amount used of permanent magnets composed of rare earths and which can be used in industrial applications. In the first part of the research work, it is shown that the permanent magnet assisted synchronous reluctance machine is a good alternative. A parametric analyse is realised using a finite element modelling in order to highlight the peculiarities of its electromagnetic behaviour. Then, an innovative multi-physic analytical modelling for the system inverter-motor is detailed in order to evaluate its performances in a reasonable computational time. The multi-physic models presented in this work concern the inverter and motor. They integrate the electromagnetic, electric, energetic, thermal, mechanic, and techno-economic aspects. The multi-physical model of the electric machine is validated by means of tests carried out on a prototype. The model of the system which has been developed is used in a design procedure by optimization of drive systems. For this purpose, an original optimization approach is presented for the simultaneous design of two applications by imposing the constraint of using the same magnetic lamination. On one hand it is an application of fixed speed and on the other hand an application of electric traction. The optimization method used is a type of differential evolution optimization. The results of the optimizations realised determine the optimal designs or the optimal compromise with Pareto front which deal with both applications. Finally, this thesis has placed the permanent magnet assisted synchronous reluctance machine among structures of machines with great industrial potential.

Αντικείµενο της διατριβής είναι η ανάπτυξη νέων µεθοδολογιών εκµάθησης και σύγκλισης των Ασαφών Γνωστικών ∆ικτύων που προτείνονται για τη βελτίωση και προσαρµογή της συµπεριφοράς τους, καθώς και για την αύξηση της απόδοσής τους, αναδεικνύοντάς τα σε αποτελεσµατικά δυναµικά συστήµατα µοντελοποίησης. Τα νέα βελτιωµένα Ασαφή Γνωστικά ∆ίκτυα, µέσω της εκµάθησης και προσαρµογής των βαρών τους, έχουν χρησιµοποιηθεί στην ιατρική σε θέµατα διάγνωσης και υποστήριξης στη λήψη απόφασης, καθώς και σε µοντέλα βιοµηχανικών συστηµάτων που αφορούν τον έλεγχο διαδικασιών, µε πολύ ικανοποιητικά αποτελέσµατα. Στη διατριβή αυτή παρουσιάζονται, αξιολογούνται και εφαρµόζονται δύο νέοι αλγόριθµοι εκµάθησης χωρίς επίβλεψη των Ασαφών Γνωστικών ∆ικτύων, οι αλγόριθµοι Active Hebbian Learning (AHL) και Nonlinear Hebbian Learning (NHL), βασισµένοι στον κλασσικό αλγόριθµό εκµάθησης χωρίς επίβλεψη τύπου Hebb των νευρωνικών δικτύων, καθώς και µια νέα προσέγγιση εκµάθησης των Ασαφών Γνωστικών ∆ικτύων βασισµένη στους εξελικτικούς αλγορίθµους και πιο συγκεκριµένα στον αλγόριθµο Βελτιστοποίησης µε Σµήνος Σωµατιδίων και στον ∆ιαφοροεξελικτικό αλγόριθµο. Οι προτεινόµενοι αλγόριθµοι AHL και NHL στηρίζουν νέες µεθοδολογίες εκµάθησης για τα ΑΓ∆ που βελτιώνουν τη λειτουργία, και την αξιοπιστία τους, και που παρέχουν στους εµπειρογνώµονες του εκάστοτε προβλήµατος που αναπτύσσουν το ΑΓ∆, την εκµάθηση των παραµέτρων για τη ρύθµιση των αιτιατών διασυνδέσεων µεταξύ των κόµβων. Αυτοί οι τύποι εκµάθησης που συνοδεύονται από την σωστή γνώση του εκάστοτε προβλήµατος-συστήµατος, συµβάλλουν στην αύξηση της απόδοσης των ΑΓ∆ και διευρύνουν τη χρήση τους. Επιπρόσθετα µε τους αλγορίθµους εκµάθησης χωρίς επίβλεψη τύπου Hebb για τα ΑΓ∆, αναπτύσσονται και προτείνονται νέες τεχνικές εκµάθησης των ΑΓ∆ βασισµένες στους εξελικτικούς αλγορίθµους. Πιο συγκεκριµένα, προτείνεται µια νέα µεθοδολογία για την εφαρµογή του εξελικτικού αλγορίθµου Βελτιστοποίησης µε Σµήνος Σωµατιδίων στην εκµάθηση των Ασαφών Γνωστικών ∆ικτύων και πιο συγκεκριµένα στον καθορισµό των βέλτιστων περιοχών τιµών των βαρών των Ασαφών Γνωστικών ∆ικτύων. Με τη µεθοδο αυτή λαµβάνεται υπόψη η γνώση των εµπειρογνωµόνων για τον σχεδιασµό του µοντέλου µε τη µορφή περιορισµών στους κόµβους που µας ενδιαφέρουν οι τιµές των καταστάσεών τους, που έχουν οριστοί ως κόµβοι έξοδοι του συστήµατος, και για τα βάρη λαµβάνονται υπόψη οι περιοχές των ασαφών συνόλων που έχουν συµφωνήσει όλοι οι εµπειρογνώµονες. Έτσι θέτoντας περιορισµούς σε όλα τα βάρη και στους κόµβους εξόδου και καθορίζοντας µια κατάλληλη αντικειµενική συνάρτηση για το εκάστοτε πρόβληµα, προκύπτουν κατάλληλοι πίνακες βαρών (appropriate weight matrices) που µπορούν να οδηγήσουν το σύστηµα σε επιθυµητές περιοχές λειτουργίας και ταυτόχρονα να ικανοποιούν τις ειδικές συνθήκες- περιορισµούς του προβλήµατος. Οι δύο νέες µέθοδοι εκµάθησης χωρίς επίβλεψη που έχουν προταθεί για τα ΑΓ∆ χρησιµοποιούνται και εφαρµόζονται µε επιτυχία σε δυο πολύπλοκα προβλήµατα από το χώρο της ιατρικής, στο πρόβληµα λήψης απόφασης στην ακτινοθεραπεία και στο πρόβληµα κατηγοριοποίησης των καρκινικών όγκων της ουροδόχου κύστης σε πραγµατικές κλινικές περιπτώσεις. Επίσης όλοι οι προτεινόµενοι αλγόριθµοι εφαρµόζονται σε µοντέλα βιοµηχανικών συστηµάτων που αφορούν τον έλεγχο διαδικασιών µε πολύ ικανοποιητικά αποτελέσµατα. Οι αλγόριθµοι αυτοί, όπως προκύπτει από την εφαρµογή τους σε συγκεκριµένα προβλήµατα, βελτιώνουν το µοντέλο του ΑΓ∆, συµβάλλουν σε ευφυέστερα συστήµατα και διευρύνουν τη δυνατότητα εφαρµογής τους σε πραγµατικά και πολύπλοκα προβλήµατα. Η κύρια συνεισφορά αυτής της διατριβής είναι η ανάπτυξη νέων µεθοδολογιών εκµάθησης και σύγκλισης των Ασαφών Γνωστικών ∆ικτύων προτείνοντας δυο νέους αλγορίθµους µη επιβλεπόµενης µάθησης τύπου Hebb, τον αλγόριθµο Active Hebbian Learning και τον αλγόριθµο Nonlinear Hebbian Learning για την προσαρµογή των βαρών των διασυνδέσεων µεταξύ των κόµβων των Ασαφών Γνωστικών ∆ικτύων, καθώς και εξελικτικούς αλγορίθµους βελτιστοποιώντας συγκεκριµένες αντικειµενικές συναρτήσεις για κάθε εξεταζόµενο πρόβληµα. Τα νέα βελτιωµένα Ασαφή Γνωστικά ∆ίκτυα µέσω των αλγορίθµων προσαρµογής των βαρών τους έχουν χρησιµοποιηθεί για την ανάπτυξη ενός ∆ιεπίπεδου Ιεραρχικού Συστήµατος για την υποστήριξη λήψης απόφασης στην ακτινοθεραπεία, για την ανάπτυξη ενός διαγνωστικού εργαλείου για την κατηγοριοποίηση του βαθµού κακοήθειας των καρκινικών όγκων της ουροδόχου κύστης, καθώς και για την επίλυση βιοµηχανικών προβληµάτων για τον έλεγχο διαδικασιών. / The main contribution of this Dissertation is the development of new learning and convergence methodologies for Fuzzy Cognitive Maps that are proposed for the improvement and adaptation of their behaviour, as well as for the increase of their performance, electing them in effective dynamic systems of modelling. The new improved Fuzzy Cognitive Maps, via the learning and adaptation of their weights, have been used in medicine for diagnosis and decision-making, as well as to alleviate the problem of the potential uncontrollable convergence to undesired states in models of industrial process control systems, with very satisfactory results. In this Dissertation are presented, validated and implemented two new learning algorithms without supervision for Fuzzy Cognitive Maps, the algorithms Active Hebbian Learning (AHL) and Nonlinear Hebbian Learning (NHL), based on the classic unsupervised Hebb-type learning algorithm of neural networks, as well as a new approach of learning for Fuzzy Cognitive Maps based on the evolutionary algorithms and more specifically on the algorithm of Particles Swarm Optimization and on the Differential Evolution algorithm. The proposed algorithms AHL and NHL support new learning methodologies for FCMs that improve their operation, efficiency and reliability, and that provide in the experts of each problem that develop the FCM, the learning of parameters for the regulation (fine-tuning) of cause-effect relationships (weights) between the concepts. These types of learning that are accompanied with the right knowledge of each problem-system, contribute in the increase of performance of FCMs and extend their use. Additionally to the unsupervised learning algorithms of Hebb-type for the FCMs, are developed and proposed new learning techniques of FCMs based on the evolutionary algorithms. More specifically, it is proposed a new learning methodology for the application of evolutionary algorithm of Particle Swarm Optimisation in the adaptation of FCMs and more concretely in the determination of the optimal regions of weight values of FCMs. With this method it is taken into consideration the experts’ knowledge for the modelling with the form of restrictions in the concepts that interest us their values, and are defined as output concepts, and for weights are received the arithmetic values of the fuzzy regions that have agreed all the experts. Thus considering restrictions in all weights and in the output concepts and determining a suitable objective function for each problem, result appropriate weight matrices that can lead the system to desirable regions of operation and simultaneously satisfy specific conditions of problem. The first two proposed methods of unsupervised learning that have been suggested for the FCMs are used and applied with success in two complicated problems in medicine, in the problem of decision-making in the radiotherapy process and in the problem of tumor characterization for urinary bladder in real clinical cases. Also all the proposed algorithms are applied in models of industrial systems that concern the control of processes with very satisfactory results. These algorithms, as it results from their application in concrete problems, improve the model of FCMs, they contribute in more intelligent systems and they extend their possibility of application in real and complex problems. The main contribution of the present Dissertation is to develop new learning and convergence methodologies for Fuzzy Cognitive Maps proposing two new unsupervised learning algorithms, the algorithm Active Hebbian Learning and the algorithm Nonlinear Hebbian Learning for the adaptation of weights of the interconnections between the concepts of Fuzzy Cognitive Maps, as well as Evolutionary Algorithms optimizing concrete objective functions for each examined problem. New improved Fuzzy Cognitive Maps via the algorithms of weight adaptation have been used for the development of an Integrated Two-level hierarchical System for the support of decision-making in the radiotherapy, for the development of a new diagnostic tool for tumour characterization of urinary bladder, as well as for the solution of industrial process control problems.