Spelling suggestions: "subject:"extended range electrical vehicle"" "subject:"eextended range electrical vehicle""
1 |
Energy Losses for Propelling and Braking Conditions of an Electric VehicleGantt, Lynn Rupert 09 June 2011 (has links)
The market segment of hybrid-electric and full function electric vehicles is growing within the automotive transportation sector. While many papers exist concerning fuel economy or fuel consumption and the limitations of conventional powertrains, little published work is available for vehicles which use grid electricity as an energy source for propulsion. Generally, the emphasis is put solely on the average drive cycle efficiency for the vehicle with very little thought given to propelling and braking powertrain losses for individual components. The modeling section of this paper will take basic energy loss equations for vehicle speed and acceleration, along with component efficiency information to predict the grid energy consumption in AC Wh/km for a given drive cycle.
This paper explains how to calculate the forces experienced by a vehicle while completing a drive cycle in three different ways: using vehicle characteristics, United States Environmental Protection Agency's (EPA) Dynamometer "target" coefficients, and an adaptation of the Sovran parameters. Once the vehicle forces are determined, power and energy demands at the wheels are determined. The vehicle power demands are split into propelling, braking, and idle to aide in the understanding of what it takes to move a vehicle and to identify possible areas for improvement. Then, using component efficiency data for various parameters of interest, the energy consumption of the vehicle as a pure EV is supplied in both DC (at the battery terminals) and AC (from the electric grid) Wh/km. The energy that flows into and out of each component while the vehicle is driving along with the losses at each step along the way of the energy path are detailed and explained. The final goal is to make the results of the model match the vehicle for any driving schedule. Validation work is performed in order to take the model estimates for efficiencies and correlate them against real world data. By using the Virginia Tech Range Extended Crossover (VTREX) and collecting data from testing, the parameters that the model is based on will be correlated with real world test data. The paper presents a propelling, braking, and net energy weighted drive cycle averaged efficiency that can be used to calculate the losses for a given cycle. In understanding the losses at each component, not just the individual efficiency, areas for future vehicle improvement can be identified to reduce petroleum energy use and greenhouse gases. The electric range of the vehicle factors heavily into the Utility Weighted fuel economy of a plug-in hybrid electric vehicle, which will also be addressed. / Master of Science
|
2 |
Design and development of an extended range electric bywire/wireless hybrid vehicle with a near wheel motor drivetrainBernacki, Mark 01 May 2009 (has links)
With automobile propulsion energy sources turning away from petroleum, the evolution
of technology naturally lends itself to electrical hybrid vehicle architectures relying on
alternatives as a primary electrical energy source. This thesis presents a design solution of
a direct-drive and drive-by-wire prototype of a hybrid extended range electric vehicle
(EREV) based on a dune buggy test bed. The developed setup eliminates nearly all
mechanical inefficiencies in the rear wheel drive transaxle drivetrain. All controls have
been purposely designed as a duplicate set to allow for full independent control of both
rear wheels in a truly independent architecture. Along with the controls supporting the
design, the motors have been mounted in a near wheel fashion to adequately replace a
true hub motor setup. In addition, by-wire throttle and by-wireless brakes in a servomechanical
fashion have been developed. The by-wireless braking system is used to
control regenerative braking for the rear of the vehicle only allowing for the front brakes
to be the primary means of braking as well as a mechanical safety redundancy. This
design allows for developments in the areas of truly independent electronic differential
systems and studies of the effect of near wheel motor setup. The efficiencies gained by
the design solutions implemented in this thesis project have shown their ability to be used
in a functioning motor vehicle. Direct gains in mechanical efficiency as well as the
removal of a non eco-friendly gasoline powertrain have been attained. In addition, an
electric architecture has been developed for further research in future studies such as
vehicle stability control, traction control and all-wheel-drive architectures.
|
3 |
Design and development of a custom dual fuel (hydrogen and gasoline) power system for an extended range electric vehicle architectureVan Wieringen, Matt 01 June 2009 (has links)
In recent decades there has been a growing global concern with regards to vehicle-generated
green house gas (GHG) emissions and the resulting air pollution. Currently, gasoline and diesel
are the most widely used automotive fuels and are refined from crude oil which is a nonrenewable
resource. When they are combusted in an Internal Combustion Engine (ICE) they
release significant amounts of air pollutants and Green House Gasses (GHG’s), such as NOx,
CO2, SOx, CO, and PM10 into the atmosphere.
The results of a feasibility study indicate that intermediary automotive propulsion
systems are needed in order to begin a transition from fossil fuels to a clean, renewable
transportation system. The Extended Range Electric Vehicle (E-REV) has been identified as an
ideal intermediate vehicle technology.
In this context, the objective of this thesis is to establish the scientific and engineering
fundamentals for the design and development of a Dual-Fuel (hydrogen + Gasoline) Power
Generation System for the E-REV sustainable mobility architecture. The devised power
generation system is comprised of hydrogen and gasoline storage reservoirs, their respective
fuelling systems, a Spark Ignition Internal Combustion Engine (SI ICE), an electric generator,
batteries, as well as supplementary electronic systems. The batteries are used to provide power
directly to the electric motors and are recharged with both the on-board electric generator and via
plug-in capabilities. The developed prototype vehicle, which used a commercial Dune Buggy as
a test bed, combined with the on-board rechargeable LiFePO4 battery pack, can provide the users
with a daily commute range of ~ 65 [km] relying solely on the battery’s electric power, whereas
for longer duration trips the use of the on-board generator would be necessary. The developed
Dual-Fuel E-REV power generation system offers the following benefits when compared to the
original gasoline ICE architecture: reduced emissions, improved acceleration (47% ↑), improved
range (75% ↑), improved fuel economy (22% ↑) and decreased average fuel cost/km (29% ↓).
|
Page generated in 0.1114 seconds