The objective of this dissertation is to enhance the functionality of an existing simulation package that is used to simulate fiber optic networks. These enhancements include the capability to simulate protection mechanisms following link failure, which is a necessity in real-world optical networks to ensure the continued flow of information following a failure in a part of the network. The capability for network traffic to choose from additional paths is also an addition to the software. The enhanced, as well as the original simulation software, are open source: this allows anyone to freely modify and improve the source code to suit his or her requirements. This dissertation will focus on mesh-based optical network topologies, which are commonly found in regional optical backbone networks, but which are also increasingly found in metropolitan areas. The regional networks all make use of wavelength division multiplexing (WDM), which consists of putting multiple different wavelengths of light on the same physical fiber. A single fiber breakage will therefore disrupt multiple fiber-optic connections. A fiber-optic network designer has to satisfy various conflicting requirements when designing a network: it must satisfy current and predicted future traffic requirements, it must be immune to equipment failure, but it must also be as inexpensive as possible. The network designer therefore has to evaluate different topologies and scenarios, and a good network simulator will provide invaluable assistance in finding an optimal solution. Protection and restoration need to be looked at in conjunction with routing and wavelength assignment (RWA), to ensure that resources in a network are used at maximum efficiency. Connection restoration time will also be looked at: this should be minimised to ensure minimal network downtime and ensuing loss of revenue. The chosen alternate connection path should also be as short as possible to minimise use of resources and maximise the carrying capacity of the network. Blocking probability (the inability to establish a connection due to a congested network) is a crucial factor and is also investigated. The topologies investigated in this dissertation consist of various mesh based real-world regional WDM fiber-optic networks. The impact of various link failures, the addition of additional alternate paths, as well as the effect of a protection mechanism on these topologies are also investigated. The proposed goals were all successfully achieved. The capability of simulating single as well as multiple link failures was introduced to the simulation package. The blocking probability of various network topologies was compared to each other in the presence of link failures. Success was also achieved in the introduction of a third alternate path to the simulation package. / Dissertation (MEng(Electronic))--University of Pretoria, 2005. / Electrical, Electronic and Computer Engineering / unrestricted

Thesis (M.S. in Information Technology Management)--Naval Postgraduate School, March 2004. / Thesis advisor(s): Norman F. Schneidewind. Includes bibliographical references (p. 51). Also available online.

No description available.

Thesis (M.S. in Electrical Engineering)--Naval Postgraduate School, December 2004. / Thesis advisor(s): Gamani Karunasiri, Xiaoping Yun. Includes bibliographical references (p. 47-50). Also available online.

Approved for public release, distribution is unlimited / Optical fiber has been the preferred cabling technology for certain building and campus network LAN backbones. Until recently, however, the use of fiber as a cabling medium to the desktop has been confined to special environments that require the unique properties of optical fiber such as noise immunity, security, distance, high bandwidth demands (CAD/CAM, video conferencing), and immunity to electrical interference. However, choosing to use optical fiber in a network over other cabling options may present significant advantages in its inherent ability to handle data at higher speeds. Decreasing costs of optical fiber components compared to the increasing electronic costs of carrying Gigabit Ethernet over Cat 5 or Cat 5E UTP copper cabling has also accelerated the migration to optical fiber LAN. The thesis conducts a feasibility study of implementing a Fiber Optic Local Area Network in Software Metrics Laboratory in Ingersoll 158. / Major, Republic of Singapore Air Force

Approved for public release, distribution is unlimited / This thesis sought to design and implement a low-cost, portable, Free-Space Optics (FSO) communications device for Ethernet applications. Under some circumstances such a device would have utility at a Combat Operations Center (COC), a Field Artillery Position, or wherever else fiber optic cable is used in garrison or field. The design was based on commercial off the shelf components originally designed for fiber optic applications. Based on a 155 megabits per second (Mbps) media converter, the design used two fiber optic transceivers, coupled to collimating lenses to pass data over free-space. Sustained data rate of 100 Mbps was achieved with full network functionality on the optical bench with a low-power (0.5mW) laser diode transmitter without focusing optics on the receiver. The laser diode power(mounted on device), was measured with acceptable losses up to 300 ft during testing using a photodiode with focusing optics. The findings indicate that the system with proper collecting optics could be optimized for free-space communication at short to moderate ranges. / Captain, United States Marine Corps

Cette thèse de doctorat est composée de trois chapitres traitant de l’impact des innovations technologiques sur les marchés financiers, prenant comme cas d’étude le marché des changes. Le premier chapitre analyse l’impact des innovations technologiques sur la géographie du marché des changes. Il utilise la connexion des pays au réseau sous-marin des câbles à fibre optique comme mesure de choc technologique exogène. Les estimations montrent que l’introduction des câbles à fibre optique a contribué à concentrer la répartition des activités de trading dans quelques grandes places financières au détriment de toutes les autres. Le deuxième chapitre s’intéresse à l’impact de la technologie sur la réaction des marchés des changes à de nouvelles informations macroéconomiques et financières. Il estime que le développement des technologies de l’information et de la communication permet de réduire la volatilité sur les marchés des changes de façon significative. Enfin, le troisième chapitre montre que le trading à grande vitesse contribue à atténuer les réactions de marché aux chocs macroéconomiques exogènes. Une explication possible, qui s’appuie sur un modèle théorique, est que le trading à grande vitesse augmente la dispersion des cotations de change, qui en retour accroît le temps nécessaire pour les traders pour traiter l’information contenue dans les cotations, rendant de fait le marché moins réactif à de nouvelles informations macroéconomiques et financières. Cette thèse de doctorat propose une nouvelle façon de penser et de mesurer l’impact du progrès technologique sur les marchés financiers. La première contribution est d’utiliser le réseau sous-marin des câbles à fibre optique comme choc technologique exogène et de mesurer son impact sur la géographie des marchés des changes et la volatilité. La seconde contribution est de montrer le lien entre trading à grande vitesse, dispersion des cotations et efficience des marchés, en utilisant l’entropie des cotations comme mesure du temps nécessaire pour traiter l’information contenue dans les prix et en comprendre l’impact sur l’efficience de marché. / This PhD dissertation is a collection of three essays on how technology has been shaping financial markets, using as a case study the foreign exchange market. The first chapter investigates the impact of technological innovations on the geography of the foreign exchange market. It uses as a proxy for exogeneous technological changes the connection of countries to submarine fiber-optic cables. The estimates of this chapter suggest that technology contributes to concentrating foreign exchange trading in an handful of financial centers. The second chapter studies the impact of technology on the reaction of foreign exchange markets to macroeconomic announcements. It shows that the development of Information and Communication Technologies dampens foreign exchange markets volatility. Finally, the third chapter shows that fast trading dampens market reaction to new macroeconomic information. One possible explanation, based on a theoretical model, is that fast traders increase the dispersion in exchange rate quotes, i.e. the time traders need to process new information about market prices; in turn, entropy dampens the market’s reaction to macro news. This PhD dissertation provides a new way to measure and conceptualize technological progress with regards to financial markets. The first contribution is to treat the network of submarine fiber optic cables as an exogenous technological shock to investigate the impact of technology on the geography of foreign exchange trading and on volatility. The second contribution is to show that patterns in the distribution of quotes matters in the context of fast trading. The concept of entropy in exchange rate quotes is used to characterize how fast information diffuses on financial markets and thereby to assess the implications of fast trading on market efficiency.

Achieving and maintaining sustainability in irrigated agriculture production in the era of rapidly increasing stress on our natural resources require, among other essential actions, optimum control and management of the applied water. Thus, a significant upgrade of the currently available soil water monitoring technologies is needed. The primary goal of this work was to reduce the uncertainties of spatially variable soil water in the field. Two approaches are suggested: 1) The Bayesian decision model that implicitly accounts for spatial variability at minimal cost based on limited field data, and 2) The Actively Heated Fiber Optic (AHFO) method that explicitly accounts for spatial variability with high sampling density at relatively low cost per measurement point. The Bayesian decision model uses an algorithm to integrate information embodied in independent estimates of soil water depletion to derive a posterior estimation of soil water status that has the potential to reduce the risk of costly errors in irrigation scheduling decisions. The sources of information are obtained from an ET based water balance model, soil water measurements, and expert opinion. The algorithm was tested in a numerical example based on a field experiment where soil water depletion measurements were made at 43 sites in an agricultural field under center pivot irrigation. The results showed that the estimates of the average soil water depletion in the field obtained from the posterior distributions of soil water depletion proved to outperform simple averaging of n soil water depletion measurements, up to n = 35 measurements. For n< 3, the model also provided a 39% average reduction in risk of error derived from non-representative measurements. The AHFO method observes the heating and cooling of a buried fiber optic (FO) cable through the course of a pulse application of energy as monitored by a distributed temperature sensing (DTS) system to reveal soil water content simultaneously at sub-meter scale along the FO cable that can potentially exceeds kilometers in length. A new and simple interpretation of heat data that takes advantage of the characteristics of FO temperature measurements is presented. The results demonstrate the feasibility of AHFO method application to obtain <0.05 m³m⁻³ error distributed measurements of soil water content under laboratory controlled conditions. The AHFO method was then tested under field conditions using 750 m of FO cables buried at 30, 60, and 90 cm depths in agricultural field. The calibration curve relating soil water content to the thermal response of the soil to a heat pulse was developed in the lab. It was successively applied to the 30 and 60 cm depths cables, while the 90 cm depth cable illustrated the challenges of soil heterogeneity for this technique. The method was used to map with high spatial (1m) and temporal (1hr) resolution the spatial variability of soil water content and fluxes induced by the non-uniformity of water application at the surface. / Graduation date: 2012

M. Tech. (Department of Process Control and Computer Systems, Faculty of Engineering and Technology), Vaal University of Technology. / The telecommunication and utility cable monitoring system was implemented to protect the cable tampering. Cable tampering occurs despite the fact that methods have been developed, to solve and decrease cable tampering cases such as cable tampering prevention campaigns at the national and international level, organizing security patrols, replacing existing cable with fiber cables and I-Watch system installation. The objective of the research was to design and implement a cable tampering monitoring system which is able to monitor, detect, pinpoint the location and give the distance from the sensor at which the cable tampering took place. The system is an improvement on the traditional cable anti-theft monitoring system, the method of tracking resonance signal frequency was implemented. The system incorporates a sensing circuit which detects a change on the capacitance value of the cable and converts it into an equivalent frequency value, Field-Programable Gate Array (FPGA) board is utilized to convert the frequency into the cable length (the distance from sensor of cable which was taken away), after detecting an anomaly on the cable (tampered with) the output of the system is divided into two parts which are display mode and messaging mode. For display mode, the system uses a Liquid Crystal Display (LCD) which displays the GPS Coordinates of the location where the cable tampering took place and the distance from sensor of the cable which has been tampered with. In the messaging mode, the FPGA activates the GSM module and the module sends alert flag message to the user when the cable is tampered with.