Nowadays, thin-walled load bearing structures can be realised using textile reinforced concrete (BRAMESHUBER and RILEM TC 201-TRC [1]). The required tensile strength is achieved by embedding several layers of textile. By means of the laminating technique the number of textile layers that can be included into the concrete could be increased. To further increase the first crack stress and the ductility as well as to optimize the crack development, fine grained concrete mixes with short fibres can be used. By a schematic stress-strain curve the demands on short fibres are defined. Within the scope of this study, short fibres made of glass, carbon, aramid and polyvinyl alcohol are investigated in terms of their ability to fit these requirements. On the basis of these results, the development of hybrid fibre mixes to achieve the best mechanical properties is described. Additionally, a conventional FRC with one fibre type is introduced. Finally, the fresh and hardened concrete properties as well as the influence of short fibres on the load bearing behaviour of textile reinforced concrete are discussed.

The thesis deals with principles and common applications of the electron backscatter diffraction (EBSD) method. Some practical experience in application of the method to a study of highly deformed structure of copper and its thermal stability is described on one hand, and, on the other hand, to a study of phase composition of TRIP steel on various levels of imposed strain. The limitations of EBSD method are discussed along with its resolution in comparison with other complimentary techniques.

Detailed information about the oceanic environment is essential for many applications in the field of marine geology, marine biology, coastal engineering, and marine operations. Especially, knowledge of the properties of the sediment body is often required. Acoustic remote sensing techniques have become highly attractive for classifying the sea bottom and for mapping the sediment properties, due to their high coverage capabilities and low costs compared to common sampling methods. In the last decades, a number of different acoustic devices and related techniques for analyzing their signals have evolved. Each sensor has its specific application due to limitations in the frequency range and resolution. In practice, often a single acoustic tool is chosen based on the current application, supported by other non-acoustic data where required. However, different acoustic remote sensing techniques can supplement each other, as shown in this thesis. Even more, a combination of complementary approaches can contribute to the proper understanding of sound propagation, which is essential when using sound for environmental classification purposes. This includes the knowledge of the relation between acoustics and sediment properties, the focus of this thesis. Providing a detailed three dimensional picture of the sea bottom sediments that allows for gaining maximum insight into this relation is aimed at.<p><p><p>Chapters 4 and 5 are adapted from published work, with permission:<p>DOI:10.1121/1.3569718 (link: http://asadl.org/jasa/resource/1/jasman/v129/i5/p2878_s1) and<p>DOI:10.1109/JOE.2010.2066711 (link: http://ieeexplore.ieee.org/xpl/articleDetails.jsp?tp=&arnumber=5618582&queryText%3Dsiemes)<p>In reference to IEEE copyrighted material which is used with permission in this thesis, the IEEE does not endorse any of the Université libre de Bruxelles' products or services.<p> / Doctorat en Sciences de l'ingénieur / info:eu-repo/semantics/nonPublished

The thesis is focused on the analysis of the theoretical part of the unbound mixtures, their implementation and compliance. Further deals with determining the extent frost susceptibility direct and indirect method in the Czech Republic and the Member States of the European Union. The practical part is focused on the performance of tests on selected samples of unbound mixtures for which was gradually increased the content of fine particles and that direct and indirect method of determining the rate of frost susceptibility and also the evaluation of direct methods of particular customized way, which does not impose the appropriate standard. At the conclusion of the work is carried out an evaluation of the samples and comparison of the different methods with each other.

Since their inception, building materials are constantly improving. New ways to explore and improve the material's properties are constantly investigated (especially to improve the mechanical and deformation characteristics of the materials). This thesis is focused on identifying and comparing values of the modulus of elasticity of fine-grained composites. These features are compared with respect to water cement ratio, ageing and compressive strength of the investigated materials. Afterwards, the values of the modulus of elasticity are studied in the relation to the tested materials.

A series of static lateral load tests were conducted on a group of fifteen piles arranged in a 3x5 pattern. The piles were placed at a center-to-center spacing of 3.92 pile diameters. A single isolated pile was also tested for comparison to the group response. The subsurface profile consisted of cohesive layers of soft to medium consistency underlain by interbedded layers of sands and fine-grained soils. The piles were instrumented to measure pile-head deflection, rotation, and load, as well as strain versus pile depth.

This diploma thesis is focused on the properties of unsuitable and conditionally unsuitable fine-grained soils after a one-stage or two-stage treatment by using a binder. The theoretical part occupies with problematical properties of the fine grained soils in a subgrade and a possible technology of the change of these properties. The laboratory testing of treated soils is described and a practical technology of the one stage and two-stage stabilization. In the practical part the fine grained soils are treated by one-stage or two-stage stabilization. For the one stage stabilization the cement is used, for the two-stage stabilization the properties of the soil are improved by lime and then the soil is stabilized by cement. The treated soils are laboratory tested, the initial bearing index IBI, California bearing ratio CBR, unconfined compressive strength and frost susceptibility is tested. Based on the results of the laboratory tests the benefit of the two-stage stabilization is measured.

This diploma thesis deals with the issue of the determination of the frost susceptibility of soils in the subgrades of road structures. The theoretical part compares the ways of testing the frost susceptibility in the Czech Republic and other selected countries of the European Union. Furthermore, it also deals with the development of the frost susceptibility index in the Czech Republic. The empirical part focuses on the laboratory testing of the frost susceptibility of the given sample of soil by the direct frost heave method. Moreover, it also deals with the simulation of penetration of frost by the subgrade and the possibility of shortening the length of the freezing during the direct testing the frost susceptibility.

In the present work, the load-bearing behaviour of Textile Reinforced Concrete (TRC), which is a composite of a fine-grained concrete matrix and a reinforcement of high-performance fibres processed to textiles, exposed to uniaxial tensile loading was investigated based on numerical simulations. The investigations are focussed on reinforcement of multi-filament yarns of alkali-resistant glass. When embedded in concrete, these yarns are not entirely penetrated with cementitious matrix, which leads associated with the heterogeneity of the concrete and the yarns to a complex load-bearing and failure behaviour of the composite. The main objective of the work was the theoretical investigation of effects in the load-bearing behaviour of TRC, which cannot be explained solely by available experimental results. Therefore, a model was developed, which can describe the tensile behaviour of TRC in different experimental test setups with a unified approach. Neglecting effects resulting from Poisson’s effect, a one-dimensional model implemented within the framework of the Finite Element Method was established. Nevertheless, the model takes also transverse effects into account by a subdivision of the reinforcement yarns into so-called segments. The model incorporates two types of finite elements: bar and bond elements. In longitudinal direction, the bar elements are arranged in series to represent the load-bearing behaviour of matrix or reinforcement. In transverse direction these bar element chains are connected with bond elements. The model gains most of its complexity from non-linearities arising from the constitutive relations, e. g., limited tensile strength of concrete and reinforcement, tension softening of the concrete, waviness of the reinforcement and non-linear bond laws. Besides a deterministic description of the material behaviour, also a stochastic formulation based on a random field approach was introduced in the model. The model has a number of advantageous features, which are provided in this combination only in a few of the existing models concerning TRC. It provides stress distributions in the reinforcement and the concrete as well as properties of concrete crack development like crack spacing and crack widths, which are in some of the existing models input parameters and not a result of the simulations. Moreover, the successive failure of the reinforcement can be studied with the model. The model was applied to three types of tests, the filament pull-out test, the yarn pull-out test and tensile tests with multiple concrete cracking. The results of the simulations regarding the filament pull-out tests showed good correspondence with experimental data. Parametric studies were performed to investigate the influence of geometrical properties in these tests like embedding and free lengths of the filament as well as bond properties between filament and matrix. The presented results of simulations of yarn pull-out tests demonstrated the applicability of the model to this type of test. It has been shown that a relatively fine subdivision of the reinforcement is necessary to represent the successive failure of the reinforcement yarns appropriately. The presented results showed that the model can provide the distribution of failure positions in the reinforcement and the degradation development of yarns during loading. One of the main objectives of the work was to investigate effects concerning the tensile material behaviour of TRC, which could not be explained, hitherto, based solely on experimental results. Hence, a large number of parametric studies was performed concerning tensile tests with multiple concrete cracking, which reflect the tensile behaviour of TRC as occurring in practice. The results of the simulations showed that the model is able to reproduce the typical tripartite stress-strain response of TRC consisting of the uncracked state, the state of multiple matrix cracking and the post-cracking state as known from experimental investigations. The best agreement between simulated and experimental results was achieved considering scatter in the material properties of concrete as well as concrete tension softening and reinforcement waviness. / Die vorliegende Arbeit beschäftigt sich mit Untersuchungen zum einaxialen Zugtragverhalten von Textilbeton. Textilbeton ist ein Verbundwerkstoff bestehend aus einer Matrix aus Feinbeton und einer Bewehrung aus Multifilamentgarnen aus Hochleistungsfasern, welche zu textilen Strukturen verarbeitet sind. Die Untersuchungen konzentrieren sich auf Bewehrungen aus alkali-resistentem Glas. Das Tragverhalten des Verbundwerkstoffs ist komplex, was aus der Heterogenität der Matrix und der Garne sowie der unvollständigen Durchdringung der Garne mit Matrix resultiert. Das Hauptziel der Arbeit ist die theoretische Untersuchung von Effekten und Mechanismen innerhalb des Lastabtragverhaltens von Textilbeton, welche nicht vollständig anhand verfügbarer experimenteller Ergebnisse erklärt werden können. Das entsprechende Modell zur Beschreibung des Zugtragverhaltens von Textilbeton soll verschiedene experimentelle Versuchstypen mit einem einheitlichen Modell abbilden können. Unter Vernachlässigung von Querdehneffekten wurde ein eindimensionales Modell entwickelt und im Rahmen der Finite-Elemente-Methode numerisch implementiert. Es werden jedoch auch Lastabtragmechanismen in Querrichtung durch eine Unterteilung der Bewehrungsgarne in sogenannte Segmente berücksichtigt. Das Modell enthält zwei Typen von finiten Elementen: Stabelemente und Verbundelemente. In Längsrichtung werden Stabelemente kettenförmig angeordnet, um das Tragverhalten von Matrix und Bewehrung abzubilden. In Querrichtung sind die Stabelementketten mit Verbundelementen gekoppelt. Das Modell erhält seine Komplexität hauptsächlich aus Nichtlinearitäten in der Materialbeschreibung, z.B. durch begrenzte Zugfestigkeiten von Matrix und Bewehrung, Zugentfestigung der Matrix, Welligkeit der Bewehrung und nichtlineare Verbundgesetze. Neben einer deterministischen Beschreibung des Materialverhaltens beinhaltet das Modell auch eine stochastische Beschreibung auf Grundlage eines Zufallsfeldansatzes. Mit dem Modell können Spannungsverteilungen im Verbundwerkstoff und Eigenschaften der Betonrissentwicklung, z.B. in Form von Rissbreiten und Rissabständen untersucht werden, was in dieser Kombination nur mit wenigen der existierenden Modelle für Textilbeton möglich ist. In vielen der vorhandenen Modelle sind diese Eigenschaften Eingangsgrößen für die Berechnungen und keine Ergebnisse. Darüber hinaus kann anhand des Modells auch das sukzessive Versagen der Bewehrungsgarne studiert werden. Das Modell wurde auf drei verschiedene Versuchstypen angewendet: den Filamentauszugversuch, den Garnauszugversuch und Dehnkörperversuche. Die Berechnungsergebnisse zu den Filamentauszugversuchen zeigten eine gute Übereinstimmung mit experimentellen Resultaten. Zudem wurden Parameterstudien durchgeführt, um Einflüsse aus Geometrieeigenschaften wie der eingebetteten und freien Filamentlänge sowie Materialeigenschaften wie dem Verbund zwischen Matrix und Filament zu untersuchen. Die Berechnungsergebnisse zum Garnauszugversuch demonstrierten die Anwendbarkeit des Modells auf diesen Versuchstyp. Es wurde gezeigt, dass für eine realitätsnahe Abbildung des Versagensverhaltens der Bewehrungsgarne eine relativ feine Auflösung der Bewehrung notwendig ist. Die Berechnungen lieferten die Verteilung von Versagenspositionen in der Bewehrung und die Entwicklung der Degradation der Garne im Belastungsverlauf. Ein Hauptziel der Arbeit war die Untersuchung von Effekten im Zugtragverhalten von Textilbeton, die bisher nicht durch experimentelle Untersuchungen erklärt werden konnten. Daher wurde eine Vielzahl von Parameterstudien zu Dehnkörpern mit mehrfacher Matrixrissbildung, welche das Zugtragverhalten von Textilbeton ähnlich praktischen Anwendungen abbilden, durchgeführt. Die Berechnungsergebnisse zeigten, dass der experimentell beobachtete dreigeteilte Verlauf der Spannungs-Dehnungs-Beziehung von Textilbeton bestehend aus dem ungerissenen Zustand, dem Zustand der Matrixrissbildung und dem Zustand der abgeschlossenen Rissbildung vom Modell wiedergegeben wird. Die beste Übereinstimmung zwischen berechneten und experimentellen Ergebnissen ergab sich unter Einbeziehung von Streuungen in den Materialeigenschaften der Matrix, der Zugentfestigung der Matrix und der Welligkeit der Bewehrung.

In the present work, the load-bearing behaviour of Textile Reinforced Concrete (TRC), which is a composite of a fine-grained concrete matrix and a reinforcement of high-performance fibres processed to textiles, exposed to uniaxial tensile loading was investigated based on numerical simulations. The investigations are focussed on reinforcement of multi-filament yarns of alkali-resistant glass. When embedded in concrete, these yarns are not entirely penetrated with cementitious matrix, which leads associated with the heterogeneity of the concrete and the yarns to a complex load-bearing and failure behaviour of the composite. The main objective of the work was the theoretical investigation of effects in the load-bearing behaviour of TRC, which cannot be explained solely by available experimental results. Therefore, a model was developed, which can describe the tensile behaviour of TRC in different experimental test setups with a unified approach. Neglecting effects resulting from Poisson’s effect, a one-dimensional model implemented within the framework of the Finite Element Method was established. Nevertheless, the model takes also transverse effects into account by a subdivision of the reinforcement yarns into so-called segments. The model incorporates two types of finite elements: bar and bond elements. In longitudinal direction, the bar elements are arranged in series to represent the load-bearing behaviour of matrix or reinforcement. In transverse direction these bar element chains are connected with bond elements. The model gains most of its complexity from non-linearities arising from the constitutive relations, e. g., limited tensile strength of concrete and reinforcement, tension softening of the concrete, waviness of the reinforcement and non-linear bond laws. Besides a deterministic description of the material behaviour, also a stochastic formulation based on a random field approach was introduced in the model. The model has a number of advantageous features, which are provided in this combination only in a few of the existing models concerning TRC. It provides stress distributions in the reinforcement and the concrete as well as properties of concrete crack development like crack spacing and crack widths, which are in some of the existing models input parameters and not a result of the simulations. Moreover, the successive failure of the reinforcement can be studied with the model. The model was applied to three types of tests, the filament pull-out test, the yarn pull-out test and tensile tests with multiple concrete cracking. The results of the simulations regarding the filament pull-out tests showed good correspondence with experimental data. Parametric studies were performed to investigate the influence of geometrical properties in these tests like embedding and free lengths of the filament as well as bond properties between filament and matrix. The presented results of simulations of yarn pull-out tests demonstrated the applicability of the model to this type of test. It has been shown that a relatively fine subdivision of the reinforcement is necessary to represent the successive failure of the reinforcement yarns appropriately. The presented results showed that the model can provide the distribution of failure positions in the reinforcement and the degradation development of yarns during loading. One of the main objectives of the work was to investigate effects concerning the tensile material behaviour of TRC, which could not be explained, hitherto, based solely on experimental results. Hence, a large number of parametric studies was performed concerning tensile tests with multiple concrete cracking, which reflect the tensile behaviour of TRC as occurring in practice. The results of the simulations showed that the model is able to reproduce the typical tripartite stress-strain response of TRC consisting of the uncracked state, the state of multiple matrix cracking and the post-cracking state as known from experimental investigations. The best agreement between simulated and experimental results was achieved considering scatter in the material properties of concrete as well as concrete tension softening and reinforcement waviness. / Die vorliegende Arbeit beschäftigt sich mit Untersuchungen zum einaxialen Zugtragverhalten von Textilbeton. Textilbeton ist ein Verbundwerkstoff bestehend aus einer Matrix aus Feinbeton und einer Bewehrung aus Multifilamentgarnen aus Hochleistungsfasern, welche zu textilen Strukturen verarbeitet sind. Die Untersuchungen konzentrieren sich auf Bewehrungen aus alkali-resistentem Glas. Das Tragverhalten des Verbundwerkstoffs ist komplex, was aus der Heterogenität der Matrix und der Garne sowie der unvollständigen Durchdringung der Garne mit Matrix resultiert. Das Hauptziel der Arbeit ist die theoretische Untersuchung von Effekten und Mechanismen innerhalb des Lastabtragverhaltens von Textilbeton, welche nicht vollständig anhand verfügbarer experimenteller Ergebnisse erklärt werden können. Das entsprechende Modell zur Beschreibung des Zugtragverhaltens von Textilbeton soll verschiedene experimentelle Versuchstypen mit einem einheitlichen Modell abbilden können. Unter Vernachlässigung von Querdehneffekten wurde ein eindimensionales Modell entwickelt und im Rahmen der Finite-Elemente-Methode numerisch implementiert. Es werden jedoch auch Lastabtragmechanismen in Querrichtung durch eine Unterteilung der Bewehrungsgarne in sogenannte Segmente berücksichtigt. Das Modell enthält zwei Typen von finiten Elementen: Stabelemente und Verbundelemente. In Längsrichtung werden Stabelemente kettenförmig angeordnet, um das Tragverhalten von Matrix und Bewehrung abzubilden. In Querrichtung sind die Stabelementketten mit Verbundelementen gekoppelt. Das Modell erhält seine Komplexität hauptsächlich aus Nichtlinearitäten in der Materialbeschreibung, z.B. durch begrenzte Zugfestigkeiten von Matrix und Bewehrung, Zugentfestigung der Matrix, Welligkeit der Bewehrung und nichtlineare Verbundgesetze. Neben einer deterministischen Beschreibung des Materialverhaltens beinhaltet das Modell auch eine stochastische Beschreibung auf Grundlage eines Zufallsfeldansatzes. Mit dem Modell können Spannungsverteilungen im Verbundwerkstoff und Eigenschaften der Betonrissentwicklung, z.B. in Form von Rissbreiten und Rissabständen untersucht werden, was in dieser Kombination nur mit wenigen der existierenden Modelle für Textilbeton möglich ist. In vielen der vorhandenen Modelle sind diese Eigenschaften Eingangsgrößen für die Berechnungen und keine Ergebnisse. Darüber hinaus kann anhand des Modells auch das sukzessive Versagen der Bewehrungsgarne studiert werden. Das Modell wurde auf drei verschiedene Versuchstypen angewendet: den Filamentauszugversuch, den Garnauszugversuch und Dehnkörperversuche. Die Berechnungsergebnisse zu den Filamentauszugversuchen zeigten eine gute Übereinstimmung mit experimentellen Resultaten. Zudem wurden Parameterstudien durchgeführt, um Einflüsse aus Geometrieeigenschaften wie der eingebetteten und freien Filamentlänge sowie Materialeigenschaften wie dem Verbund zwischen Matrix und Filament zu untersuchen. Die Berechnungsergebnisse zum Garnauszugversuch demonstrierten die Anwendbarkeit des Modells auf diesen Versuchstyp. Es wurde gezeigt, dass für eine realitätsnahe Abbildung des Versagensverhaltens der Bewehrungsgarne eine relativ feine Auflösung der Bewehrung notwendig ist. Die Berechnungen lieferten die Verteilung von Versagenspositionen in der Bewehrung und die Entwicklung der Degradation der Garne im Belastungsverlauf. Ein Hauptziel der Arbeit war die Untersuchung von Effekten im Zugtragverhalten von Textilbeton, die bisher nicht durch experimentelle Untersuchungen erklärt werden konnten. Daher wurde eine Vielzahl von Parameterstudien zu Dehnkörpern mit mehrfacher Matrixrissbildung, welche das Zugtragverhalten von Textilbeton ähnlich praktischen Anwendungen abbilden, durchgeführt. Die Berechnungsergebnisse zeigten, dass der experimentell beobachtete dreigeteilte Verlauf der Spannungs-Dehnungs-Beziehung von Textilbeton bestehend aus dem ungerissenen Zustand, dem Zustand der Matrixrissbildung und dem Zustand der abgeschlossenen Rissbildung vom Modell wiedergegeben wird. Die beste Übereinstimmung zwischen berechneten und experimentellen Ergebnissen ergab sich unter Einbeziehung von Streuungen in den Materialeigenschaften der Matrix, der Zugentfestigung der Matrix und der Welligkeit der Bewehrung.