No description available.

To meet the new challenges of the chemical indutries, the developpement of new heterogeneous catalytic reactors and their understanding are mandatory. From these perspectives, new reactor designs based on structuring at micro or millimeter scales have emerged. They have sparked interest for their ability to decrease physical limitations for heat and mass transfers. Thus, two advanced reactor technologies for gas-liquid-solid catalysed reactions are studied. The first reactor is a micro-structured falling film (FFMR) in which vertical sub millimetric grooves are etched and coated with a catalyst. This structuration allows stabilizing the gas-liquid interface of a down flow liquid phase. A thin liquid film is generated leading to high specific surface areas. Commercially available, it represents a very good potential for performing demanding reactions (i.e.fast, exothermic) for small scale productions such as pharmaceuticals. In a second part, a new reactor concept is proposed. Open cell foams are used as catalyst support and inserted in a milli-square channel. The reactor is then submitted to a preformed gas-liquid Taylor flow. In both cases, hydrodynamics features are studied by using microscopy based methods. Their potential in terms of mass transfers are also studied by performing catalyzed α-methylstyren hydrogenation. For both reactors, it comes out that the particular flow induced by micro or milli structures leads to at least one order of magnitude higher mass transfers performances than mutliphase reactors currently used in the industry albeit it remains to be demonstrated at such scale. From all these studies, correlations, models and methods for chemical engineers (hydrodynamics, pressure drops, mass transfer) are proposed for the two reactors

Afin de répondre aux nouveaux challenges de l'industrie chimique, le développement de nouveaux réacteurs catalytiques hétérogènes plus efficaces et plus sûrs ainsi que leur compréhension sont nécessaires. Dans cette optique, des réacteurs micro ou milli-structurés ont vu le jour et suscitent un intérêt croissant de par leur capacité à diminuer les phénomènes physiques de limitations aux transferts de mantière et de chaleur. Dans ce travail, deux concepts de réacteurs structurés dédiés au milieu gaz-liquide solide sont étudiés. Le premier est un réacteur à film tombant microstructuré (FFMR) dans lequel des canaux sub-millimétriques, rectilignes et verticaux permettent de stabiliser et d'amincir un film liquide en écoulement, générant des aires d'interfaces très importantes. Disponible commercialement, il présente un très bon potentiel pour la mise en oeuvre de réactions à fortes contraintes mais pour de petites productions. Le second réacteur est quant à lui nouveau. Des mousses à cellules ouvertes métalliques sont utilisées comme support de catalyseur structurant confiné dans un canal de section millimétrique carrée et soumis à un écoulement de Taylor G-L préformé. Pour chaque réacteur, l'hydrodynamique des écoulements est étudiée par le développement de techniques microscopiques et leurs aptitudes aux transferts de masses sont évaluées par la mise en oeuvre de la réaction catalytique d'hydrogénation de l'α-methylstyrène. Il en ressort que les écoulements particuliers rencontrés dans ces deux objets permettent d'atteindre des capacités de transferts de matières supérieurs d'au moins un ordre de grandeur aux technologies usuelles pour un coût énergétique, lié à l'écoulements des fluides, faible. Par ailleurs, des éléments de dimensionnement (hydrodynamique, perte de charge et transferts de matière) ont été construits pour les deux réacteurs / To meet the new challenges of the chemical indutries, the developpement of new heterogeneous catalytic reactors and their understanding are mandatory. From these perspectives, new reactor designs based on structuring at micro or millimeter scales have emerged. They have sparked interest for their ability to decrease physical limitations for heat and mass transfers. Thus, two advanced reactor technologies for gas-liquid-solid catalysed reactions are studied. The first reactor is a micro-structured falling film (FFMR) in which vertical sub millimetric grooves are etched and coated with a catalyst. This structuration allows stabilizing the gas-liquid interface of a down flow liquid phase. A thin liquid film is generated leading to high specific surface areas. Commercially available, it represents a very good potential for performing demanding reactions (i.e.fast, exothermic) for small scale productions such as pharmaceuticals. In a second part, a new reactor concept is proposed. Open cell foams are used as catalyst support and inserted in a milli-square channel. The reactor is then submitted to a preformed gas-liquid Taylor flow. In both cases, hydrodynamics features are studied by using microscopy based methods. Their potential in terms of mass transfers are also studied by performing catalyzed α-methylstyren hydrogenation. For both reactors, it comes out that the particular flow induced by micro or milli structures leads to at least one order of magnitude higher mass transfers performances than mutliphase reactors currently used in the industry albeit it remains to be demonstrated at such scale. From all these studies, correlations, models and methods for chemical engineers (hydrodynamics, pressure drops, mass transfer) are proposed for the two reactors