Light-emitting diodes (LED) illumination takes considerable applications in nowadays daily lives due to the improvement on efficiency of the LED modules. The connections between the reliability and the lifetime, power efficiency, optical spectrum, and structure design of the LED modules are the major research topics. In this study, high-power LED modules encapsulated with different lens shapes after a thermal-aging test were studied experimentally and numerically. The results showed that the LED modules encapsulated with a hemispherical-shaped plastic lens exhibited a better lifetime due to their better thermal dissipation than those with cylindrical- or elliptical-shaped plastic lenses. In the case of 80¢J aging test, the lifetime of hemispherical-shaped lens was 1.5 times better than the cylindrical- or elliptical-shaped lenses. Decay of radiation pattern and optical spectrum of high-power LED modules fabricated by different manufacturers after a thermal-aging test were investigated experimentally and numerically. The results showed that the radiation pattern of the LED modules at the two view angles of ¡Ó (15o~75o) decreased more than the other angles as aging time increased. Due to the degradation of lens material after thermal aging, the center wavelength of the LED spectrum shifted 5 nm. Furthermore, the radius curvature of plastic lens was observed 6-70 £gm contraction as aging times increased. Both experimental and simulated results clearly indicated that improving the lens structure and lens material is essential to extend the operating life of the high-power LED modules. High-power phosphor-converted white-light-emitting diodes (PC-LEDs) with selected concentration and thickness of Ce:YAG phosphor-doped silicones were investigated to study the thermal degradation effect of the Ce:YAG phosphor-silicone layer. The experimental results showed that the lumen loss, chromaticity (CIE shift), and spectrum intensity reduction increased as the concentration of Ce:YAG phosphor doped silicone increased. We showed that 94% lumen loss was attributed to 5.5 wt% Ce:YAG doping and only 6% of the lumen loss was due to a 1mm thickness of silicone degradation. From practical points of view, we found that a lower doping concentration of the Ce:YAG phosphor in thin silicone is a better choice in terms of having less thermal degradation for use in packaging of the high-power PC-LEDs modules and is essential to extend the operating lifetime of the phosphor-based white LED modules.

This Thesis examines the operation and dynamic performance of a single-stage, single-switch power factor corrector, S4 PFC, with an integrated magnetic device, IM. Also detailed isthe development and analysis of a high power light emitting diode, HP LED, power factorcorrection converter and proposed voltage regulation band control approach.The S4 PFC consists of a cascaded discontinuous current mode, DCM, boost stage anda continuous current mode, CCM, forward converter. The S4 PFC achieves a high powerfactor, low input current harmonics and a regulated voltage output, utilising a singleMOSFET. A steady-state analysis of the S4 PFC with the IM is performed, identifying theoperating boundary conditions for the DCM power factor correction stage and the CCMoutput voltage regulation stage. Integrated magnetic analysis focuses on understanding theperformance, operation and generated flux paths within the IM core, ensuring the device doesnot affect the normal operation of the converter power stage. A design method for the S4 PFCwith IM component is developed along with a cost analysis of this approach. Analysis predictsthe performance of the S4 PFC and the IM, and the theoretical work is validated by MATLABand SABER simulations and measurements of a 180 W prototype converter.It is not only the development of new topological approaches that drives theadvancement of power electronic techniques. The recent emergence of HP LEDs has led to aflurry of new application areas for these devices. A DCM buck-boost converter performs thepower factor correction and energy storage, and a cascaded boundary conduction current modebuck converter regulates the current through the LED arrays. To match the useful operatinglifetime of the HP LEDs, electrolytic capacitors are not used in the PFC converter. Analysisexamines the operation and dynamic characteristics of a PFC converter with low capacitiveenergy storage capacity and its implications on the control method. A modified regulationband control approach is proposed to ensure a high power factor, low input current harmonicsand output voltage regulation of the PFC stage. Small signal analysis describes the dynamicperformance of the PFC converter, Circle Criterion is used to determine the loop stability.Theoretical work is validated by SABER and MATLAB simulations and measurements of a180 W prototype street luminaire.