Spelling suggestions: "subject:"holographic interferometry."" "subject:"olographic interferometry.""
11 |
Evaluation of volume holographic optical elements in dichromated gelatinBlair, Loudon Thomas January 1989 (has links)
The use of dichromated gelatin (DCG) for the formation of holographic optical elements is investigated. In particular, a study is made of the possible sources of spurious recording and replay in such diffracting media. The formation of spurious gratings due to boundary mismatch, when recording a transmission grating in air, is investigated. Experimental results are treated using a simple linear theory which is capable of predicting the relative modulation strengths of each of six recorded gratings. The efficiencies of each of these gratings is related to Fresnel's Laws of reflection and therefore the beam ratio. A brief experimental study of the beam ratio is made. It is found that linear theories do not explain replay of gratings recorded at high exposure energies. This is because DCG exhibits a saturating recording characteristic. A theoretical model is developed to verify experimental results of modulation versus exposure energy for the recording of single and double exposure transmission gratings and their subsequent harmonics. This gives good agreement for most cases, however, it does not explain fully the replay of a difference grating formed due to nonlinearities in the double exposure hologram. A coupled wave theory is therefore developed to take account of both multiple grating interactions between the two primary recordings and the recording of a third grating with a spatial frequency equal to the difference of the two fundamental frequencies. The model gives good agreement with experimental results for varying replay angles and wavelengths. DCG is finally used as a tool to investigate the formation of noise gratings in silver halide emulsions. In particular, results are presented for experiments which were performed to study the effect of high angular scatter upon the selectivity of the noise grating and the recording of reflection noise gratings.
|
12 |
Fabrication of nanoparticle arrays by holographic lithography /Lee, Fung Ying. January 2007 (has links)
Thesis (M.Phil.)--Hong Kong University of Science and Technology, 2007. / Includes bibliographical references (leaves 63-66). Also available in electronic version.
|
13 |
Holographic interferometry applications in elastic-plastic fracture mechanicsCarmel, Yves. January 1981 (has links)
No description available.
|
14 |
Flow visualisation by means of Electronic Speckle Pattern Interferometry (ESPI)Michal, Eli 09 April 2008 (has links)
Abstract
This research report details the design, construction, implementation and optimization
of a quantitative movable flow visualization technique named Electronic Speckle
Pattern Interferometry (ESPI).
ESPI is a powerful visualisation technique that can allow for full flowfield analysis. It
is thus possible to quantitatively determine the refractive index variation and hence
the density variation in a compressible gas flow.
Complementary results between previous work done and the current work shows the
integrity of ESPI results
Flowfields that were investigated included – candle flame, axis symmetric and nonaxis
symmetric nozzles.
Due to advanced CCD technology, there have been improvements in the overall
image quality. Post processing of the images produced clearer images and hence
better results.
The technique was applied on multiple test rigs, proving its versatility
|
15 |
Development of Holographic Interferometric Methodologies for Characterization of Shape and Function of the Human Tympanic MembraneKhaleghi, Morteza 29 April 2015 (has links)
The hearing process involves a series of physical events in which acoustic waves in the outer ear are transduced into acousto-mechanical motions of the middle ear, and then into chemo-electro-mechanical reactions of the inner ear sensors that are interpreted by the brain. Air in the ear canal has low mechanical impedance, whereas the mechanical impedance at the center of the eardrum, the umbo, is high. The eardrum or Tympanic Membrane (TM) must act as a transformer between these two impedances; otherwise, most of the energy will be reflected rather than transmitted. The acousto-mechanical transformer behavior of the TM is determined by its geometry, internal fibrous structure, and mechanical properties. Therefore, full-field-of-view techniques are required to quantify shape, sound-induced displacements, and mechanical properties of the TM. Shapes of the mammalian TMs are in millimeter ranges, whereas their acoustically-induced motions are in nanometer ranges, therefore, a clinically-applicable system with a measuring range spanning six orders of magnitude needs to be realized. In this Dissertation, several full-field measuring modalities are developed, to incrementally address the questions regarding the geometry, kinematics, and dynamics of the sound-induced energy transfer through the mammalian TMs. First, a digital holographic system with a measuring range spanning several orders of magnitude is developed and shape and 1D sound-induced motions of the TM are measured with dual-wavelength holographic contouring and single sensitivity vector holographic interferometry, respectively. The sound-induced motions of the TMs are hypothesized to be similar to those of thin-shells (with negligible tangential motions) and therefore, 3D sound-induced motions of the TM are estimated by combining measurements of shape and 1D motions. In order to test the applicability of the thin-shell hypothesis, and to obtain further details of complex spatio-temporal response of the TMs, holographic systems with multiple illumination directions are developed and shape and acoustically-induced vibrational patterns of the TMs are quantified in full 3D. Furthermore, to move toward clinical applications and in-vivo measurements, high-speed single-shot multiplexing holographic system are developed and 3D sound-induced motions of the TM are measured simultaneously in one single frame of the camera. Finally, MEMS-based high-resolution force sensing capabilities are integrated with holographic measurements to relate the kinematics and dynamics of the acousto-mechanical energy transfer in the hearing processes. The accuracy and repeatability of the measuring systems are tested and verified using artificial samples with geometries similar to those of human TMs. The systems are then used to measure shape, 3D sound-induced motions, and forces of chinchilla and human cadaveric TM samples at different tonal frequencies (ranging from 400 Hz to 15 kHz) simultaneously at more than 1 million points on its surface. A general conclusion is that the tangential motions are significantly (8-20 dB) smaller than the motions perpendicular to the TM plane, which is consistent with the thin-shell hypothesis of the TM. Force measurements reveal that frequency-dependent forces of the TM, are also spatially dependent so that the maximum magnitudes of the force transfer function of the umbo occurs at frequencies between 1.6 to 2.3 kHz, whereas the maximum values for other points on the TM surface occurs at higher frequency ranges (4.8 to 6.5 kHz). The Dissertation is divided into two Parts, each contains several Chapters. In the first Part, general overviews of the physiology of the human middle ear, along with brief summaries of previous studies are given, and basics of holographic interferometry are described. In the second Part, developments and implementations achieved in completion of this work are described in the form of a series of manuscripts. Finally, conclusions and recommendations for future work are provided.
|
16 |
The Study of the Temperature Ramp-up Rate on the Warpage of IC Packages in the IR-reflow ProcessChang, Chih-Fang 06 September 2000 (has links)
The main aim of this study is to extending the holographic interferometry technique to measure the effect of the temperature ramp-up rate on the warpage of IC packages in the IR-reflow process . It is noted that both the warpage and the ambient temperature change can cause image fringes. Therefore, an auxiliary sphere is used to identify the fringe numbers caused by the ambient temperature change during the experiment. Then, the Taguchi method will be deduced to study the effect of the temperature ramp-up rate and peak waiting temperature on the warpage of PBGA package in the IR-reflow process.
|
17 |
DESIGN AND FABRICATION OF HOLOGRAPHIC OPTICAL ELEMENTSChen, Chungte W. January 1980 (has links)
No description available.
|
18 |
Volume holographic infra-red filters in iron doped lithium niobateMills, P. A. January 1985 (has links)
Two collimated laser beams, wavelength O-514 μm are overlapped within a crystal of heavily iron doped lithium niobate to form a one-dimensional volume holographic grating, a few mm long, designed to behave as a highly selective filter at near infra-red wavelengths. A novel recording geometry is described and a variety of diagnostic experiments are undertaken to determine the main characteristics of the grating. A filter fabricated using this method is used to obtain single mode operation from a 1-55 μm semiconductor laser. The historical survey of holography contained in chapter one emphasizes the dynamic properties and applications of photorefractive recording materials. Standard results of two mathematical theories, kinematic and coupled-wave, are used in chapter two to predict the properties of a Bragg grating when replayed with infra-red light. Chapter three details the recording materials suitable for an infra-red filter, followed by a discussion on the concept of 'scaling'. The recording mechanism of iron doped lithium niobate, including its fixing and erasure process, is presented in chapter four as a basis for selecting the most advantageous crystal characteristics. Mathematical models describing the complex dynamic recording process in iron doped lithium niobate are introduced in chapter five. A novel recording geometry involving the use of two prisms is critically described in chapter six, from initial conception to final implementation. The performance of the grating as an infra-red filter is assessed in chapter seven by measuring the angular response of the transmitted and diffracted beams at a wavelength of 1-152 microns. Chapter eight discusses the applications for volume holographic filters, with particular reference to one example. In chapter nine general conclusions are drawn and future directions for research are suggested. A number of appendices are also included.
|
19 |
The determination of surface deformations by holographic-electro-optical processing /Rezai, K. (Khosrow) January 1981 (has links)
This thesis is concerned with the experimental determination of surface displacements of material foils by means of an automatic evaluation of the holographic interferograms obtained in testing. The experimental work utilizes a newly developed method referred to as the "holographic-electro-optical" technique that employs a specially designed microcomputer unit. The experimental procedure and the microcomputer organization are fully described. The application of this technique is illustrated by the evaluation of strain field and thickness changes at a large number of points on both sides of a commercial newsprint paper sample subjected to uniaxial loads. Furthermore, a new quantity called the "volumetric mass density" is introduced for this material for the first time that is experimentally evaluated and correlated to the obtained strain field. In the conclusion of this thesis general remarks concerning the holographic-electro-optical technique are given and the obtained results for the newsprint sample and future research are indicated.
|
20 |
Dental holographic interferometry in laboratory installation and in vivoWedendal, Paul R. January 1974 (has links)
Thesis--Karolinska Institutet. / Extra t.p. with thesis statement inserted. Four articles by the author reprinted from Acta odont. Scand. and Sc. ed. bull. in pocket. Includes bibliographical references (p. 31-34).
|
Page generated in 0.1144 seconds