Despite its many challenges and limitations the concept of in situ upgrading of informal settlements has become one of the most favoured approaches to the housing crisis in the ‘Global South’. Due to its inherent principles of incremental in situ development, prevention of relocations, protection of local livelihoods and democratic participation and cooperation, this approach is often perceived to be more sustainable than other housing approaches that often rely on quantitative housing delivery and top down planning methodologies. While this study does not question the benefits of the in situ upgrading approach, it seeks to identify problems of its practical implementation within a specific national and local context. The study discusses the origin and importance of this approach on the basis of a review of international housing policy development and analyses the broader political and social context of the incorporation of this approach into South African housing policy. It further uses insights from a recent case study in Cape Town to determine complications and conflicts that can arise when applying in situ upgrading of informal settlements in a complex local context. On that basis benefits and limitations of the in situ upgrading approach are specified and prerequisites for its successful implementation formulated. / Trotz vieler Herausforderungen und Beschränkungen gilt das Konzept des in situ upgrading informeller Siedlungen als eine der wichtigsten Herangehensweisen an die Wohnraumkrise im „globalen Süden“. Aufgrund seiner immanenten Prinzipien einer schrittweisen Entwicklung an Ort und Stelle, der Vermeidung von Umsiedlungen, dem Erhalt lokaler Existenzgrundlagen sowie demokratischer Beteiligung und Kooperation, wird oftmals angenommen, dass diese Herangehensweise nachhaltiger ist, als eine quantitativ ausgerichtete Wohnraumversorgung und Top-Down-Planungsansätze. Während diese Studie die Vorteile des in situ upgrading nicht in Frage stellt, zielt sie darauf ab, Probleme der praktischen Umsetzung dieses Ansatzes in einem spezifischen nationalen und lokalen Kontext zu identifizieren. Die Studie diskutiert die Herkunft und die Bedeutung des in situ upgrading auf der Grundlage einer Rückschau auf die Entwicklung internationaler Wohnraumpolitik und analysiert den politischen und sozialen Kontext der Einbettung dieses Ansatzes in die südafrikanische Wohnraumpolitik. Darüber hinaus macht sie sich Einblicke einer kürzlich durchgeführten Fallstudie in Kapstadt zunutze, um Probleme und Konflikte zu erfassen, die bei der Umsetzung des in situ upgrading in einem komplexen lokalen Kontext entstehen können. Auf dieser Grundlage werden die Vorteile wie auch die Beschränkungen des in situ upgrading näher spezifiziert und zentrale Voraussetzungen für eine erfolgreiche Umsetzung des Konzeptes formuliert.

Contamination of soils and groundwater with nitroaromatic compounds such as 2,4,6-trinitrotoluene (TNT) and dinitrotoluenes (DNTs) has drawn considerable attention due to widely distributed contamination sites and substantial efforts for cleanup. Two isomers of DNT, specifically 2,6-dinitrotoluene (2,6-DNT) and 2,4-dinitrotoluene (2,4-DNT), occur as soil and groundwater contaminants at former TNT production sites. The discovery of bacteria that use DNT isomers as electron donors has encouraged bioremediation at contaminated sites. Current work is extending the existing engineered bioremediation to naturally occurring in situ biodegradation and focuses on the application of natural attenuation (NA) as a remediation strategy for residual DNT at contaminated sites. More specifically this research evaluated factors influencing in situ bioremediation of DNTs and TNT in surface soils, vadose zones, and saturated medium. Applications involving surface soils and vadose zones investigated the potential of water infiltration to promote in situ bioremediation. Studies in saturated media were more applicable to NA. Factors that were also considered in studies conduced included: 1) the presence and distribution of degrading microbes in field soils (Barksdale, WI); 2) the dissolution and bioavailability of contaminants in historically contaminated soils; and 3) the effect of mixtures of contaminants (i.e., DNTs and TNT) on biodegradation processes. This research provided information useful for practitioners considering an in situ bioremediation NA as a remedial solution for contaminated sites. Under the condition simulating downflow of surface waters or rainwater, the rapid rate of DNT degradation could be facilitated by the availability of oxygen in the soil gas without concern of toxicity (i.e., nitrite evolution and pH drop) and addition of nutrients. As a result, in situ bioremediation or NA should be strongly considered as a remedial option for Barksdale soils and similar sites where relatively low concentrations of DNT isomers are present as contaminants. At TNT contaminated sites TNT was not mineralized by indigenous microorganisms despite oxidative biotransformation, and mixed culture capable of growth on DNT also could not develop the mineralization of TNT during DNT degradation. This suggests that the mixtures of contamination did not improve the potential for in situ TNT bioremediation.

Conselho Nacional de Desenvolvimento Científico e Tecnológico / A set of assays was carried out to develop a method for estimating ruminal degradation of proteins based on ammonia production in vitro. Samples of soybean meal, meat and bone meal, ryegrass (Lolium multiflorum) and cynodon (Cynodon dactilon var. Dactylon) were incubated by using the procedures of the in vitro/gas method. The effects of sample amount; starch inclusion to correct for ammonia uptaked by bacteria; nitrogen concentration in buffer solution and preview treatment of samples for soluble nitrogen extraction were evaluated. Short-time in vitro assays were also carried out to estimate degradation rate or solubilization rate of soluble fraction of nitrogen. Results of protein degradation obtained for some samples incubated in vitro were compared to those obtained from in situ and in vivo assays carried out in parallel. Results of protein degradation of different samples were not affected by sample size (15 mg N/ sample 1 g of sample) whereas degradability and dagradation rate of ryegrass protein, without starch correction, was negativelly affected by exclusion of ammonium bicarbonate from buffer solution (P<0,05). The preview extraction of soluble fraction of samples affected (P<0.05) protein degradation only of the ryegrass and soybean meal samples. Estimates of protein degradation for concentrate samples were not affected by starch inclusion. However, starch inclusion increased (P<0.05) protein degradation for ryegrass samples. Determination coefficient (r²) of regressions relating ammonia concentration and incubation time were usually high (above 0.80). Protein degradability of soybean meal, meat and bone meal and ryegrass samples were lower by in vitro than by in situ method (P<0.05). In turn, protein degradability of ryegrass and cynodon samples estimated in vitro was similar to obtained in vivo. In conclusion, although it needs more consistent validation, the in vitro/gas method might be an useful tool for estimating rumen degradabilty of proteins. / Foi conduzido um conjunto de ensaios in vitro com o objetivo de desenvolver um método para estimar a degradação de proteína no rúmen baseado na liberação de amônia no meio de incubação. Foram incubadas amostras de farelo de soja, farinha de carne e ossos, azevém (Lolium multiflorum) e cynodon (Cynodon dactilon var. Dactylon) utilizando-se os procedimentos da técnica in vitro/gases. Foi avaliado o efeito da quantidade de amostra incubada, da inclusão de amido para corrigir a fração de nitrogênio capturado pelas bactérias, do teor de nitrogênio na solução tampão e do tratamento prévio das amostras para remoção da fração solúvel do nitrogênio. Foram conduzidos também ensaios in vitro de curta duração para medir a taxa de degradação ou de solubilização da fração solúvel da proteína das amostras. Os resultados de degradação protéica obtidos em algumas amostras incubadas in vitro foram comparados com os obtidos em ensaios in vivo e in sito, que foram conduzidos paralelamente. A degradação da proteína de diferentes amostras não foi afetada pelo tamanho de amostra (15 mg N/ amostra 1 g de amostra), entretanto a degradabilidade e a taxa de degradação protéica do azevém, sem correção de amido, foram negativamente afetadas pela exclusão do bicarbonato de amônio da solução tampão (P<0,05). O tratamento prévio da amostra interferiu (P<0,05) nos resultados de degradação protéica das amostras de azevém e farelo de soja, mas não da farinha de carne. Em geral, a inclusão de amido para correção da amônia utilizada pelos microorganismos, resultou em maiores valores de degradabilidade da proteína do azevém (P<0,05), mas não das outras amostras. O coeficiente de determinação (r²) das estimativas da taxa de degradação, calculada com base na variação da concentração de amônia no meio ao longo do tempo de incubação, foram geralmente altos (superiores a 80%). As degradabilidades efetivas da proteína das amostras de farelo de soja, farinha de carne e azevém, estimadas pelo método in vitro foram inferiores às estimadas pelo método in situ (P<0,05). Por outro lado, a degradabilidade efetiva da proteína de amostras de azevém e Cynodon estimada pelo método in vitro não diferiu dos valores obtidos in vivo com ovinos fistulados no duodeno. Em conclusão, o método in vitro/gases pode ser uma ferramenta útil para estimar a degradabilidade ruminal das proteínas, embora ainda necessite ser melhor validado com estudos in vivo.

Orientador: Mario Luiz Teixeira de Moraes / Resumo: A aroeira (Myracrodruon urundeuva) é uma espécie dioica e se encontra na lista de espécies ameaçadas de extinção, devido ao seu alto valor econômico e à destruição do seu habitat. Dessa forma, se faz necessária a adoção de estratégias para a conservação ex situ dessa espécie arbórea nativa, de tal modo que a variabilidade genética das populações seja mantida. O objetivo deste trabalho foi quantificar a proporção sexual, a sobrevivência e a variação genética do diâmetro à altura do peito (DAP), em seis testes de progênies de M. urundeuva provenientes de seis populações distintas originárias de três biomas (Caatinga, Cerrado e Mata Atlântica). O delineamento utilizado, em cada teste de progênies, foi o de bloco casualizado. As estimativas de componentes de variância e parâmetros genéticos, para os caracteres quantitativos para os caracteres quantitativos, DAP e sobrevivência, foram realizadas pelo método REML/BLUP (máxima verossimilhança restrita / melhor predição linear não viciada). O tamanho efetivo da população foi calculado com base no número de indivíduos com flores masculinas e femininas, em um modelo que não há controle de gametas (RS). Verificou-se com base nas estimativas dos parâmetros genéticos que as procedências de Itarumã e Seridó expressam maior variação genética para o caráter DAP, o que possibilita sua utilização na conservação e no melhoramento genético. Foram encontrados altos percentuais de sobrevivência o que caracteriza uma ótima adaptação da espécie no l... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: The aroeira (Myracrodruon urundeuva) is a dioecious species and is on the list of endangered species due to its high economic value and the destruction of its habitat. That way, becomes necessary the adoption of strategies for the ex situ conservation of native tree species, such that the genetic variability of populations is maintained. The objective of this work was to quantify the sex ratio, the survival and the genetic variation of the diameter at breast height (DBH), on six test progenies of Myracrodruon urundeuva from six distinct populations originating three biomes (Caatinga, Cerrado and Atlantic Forest). The design used, in each progeny test, was a randomized block design. Estimates of variance components and genetic parameters, for quantitative traits DBH and survival, were obtained by REML / BLUP method (restricted maximum likelihood / best linear prediction untainted). The effective population size was calculated based on the number of individuals with male and female flowers in the population, in a model that there is no control of gametes (RS). It was verified based on the estimates of the genetic parameters that the Itarumã and Seridó provenances express greater genetic variation for the DBH character, which allows their use in conservation and genetic improvement. High survival percentages were found, which characterizes an optimal adaptation of the species at the planting site. The sex ratio was biased, with predominance of male flowering plants (3♂:1♀), but ... (Complete abstract click electronic access below) / Mestre

Recrystallisation is an important topic in the metal industry since the process may drastically alter the properties of the materials subjected to it. By controlling the recrystallisation process, the material properties can be adjusted as desired, which could lead to stronger materials and hence lighter constructions, decreasing our material consumption. This is currently regulated using softening curves complied from tensile tests, a method which does not show the degree of recrystallisation of a metal. This thesis work therefore explores the possibility to characterise the recrystallisation process using in situ X-ray diffraction, XRD, during heating.The method proposed is using in situ heat treatments of aluminium samples combined with XRD measurements. The results show that it is possible to follow the recrystallisation process of rolled aluminium alloy AA3003 by using in situ XRD during heating, a discovery that could facilitate development and understanding of new materials. Nevertheless, further investigations of the subject is required before the method will be profitable. / Rekristallisation är ett viktigt ämne inom metallindustrin, detta eftersom materialegenskaper drastiskt kan förändras under rekristallisationsprocessen. Genom att kontrollera rekristallisationsprocessen kan materialegenskaper skräddarsys efter applikation. Även starkare material kan tillverkas och därav kan lättare strukturer konstrueras och på så vis minskar även materialåtgången. Idag regleras rekristallisation med hjälp av mjukningskurvor sammanställda genom dragprov, en metod som inte kan visa rekristallisationsgraden av en metall. Detta examensarbete utforskar möjligheten att karaktärisera rekristallisationsprocessen genom att använda in situ röntgendiffraktion, XRD, under värmningsprocessen.Den framtagna metoden inkluderar in situ värmebehandlingar av aluminiumprover i kombination med XRD-mätningar. De erhållna resultaten från experimenten visar på att det är fullt möjligt att följa rekristallisationsprocessen av aluminiumlegering AA3003 med in situ XRD, en upptäckt som kan komma att underlätta vid utveckling och förståelse av legeringar och nya material. Dock krävs fortsatta studier i ämnet innan metoden kan anses vara lönsam.

Le développement de techniques de suivi in situ de réactions de polymérisation en émulsion est un véritable enjeu, motivé par le désir d’établir des relations entre structure, propriétés physico-chimiques et propriétés d’usage du latex final. Par ailleurs, ces techniques fournissent des informations sur les phénomènes chimiques et physico-chimiques mis en jeu qui contribuent à une meilleure compréhension. Des études récentes montrent que la spectroscopie Raman peut être une technique adaptée à cette problématique, de par sa simplicité de mise en œuvre (transportabilité, adaptabilité de l’appareillage, etc.), la performance de la mesure (temps d’acquisition de l’ordre de la seconde) et la richesse des informations fournies (de l’échelle moléculaire à celle du matériau). L’objectif de notre travail a été de déterminer le potentiel de la spectroscopie Raman quant au contrôle de la polymérisation en macroémulsion du styrène tant au niveau du bon déroulement de la réaction (conversion…) qu’au niveau des propriétés du latex formé (stabilité…). Pour réaliser ce travail expérimental, un pilote de polymérisation a été installé pour la première fois au sein du laboratoire des Matériaux Optiques, Photonique et Systèmes (LMOPS). La particularité de notre système est qu’il a été conçu pour conserver le maximum de liberté pour la réalisation de l’étude spectroscopique (montages optiques). La première partie de notre projet a donc été de déterminer un protocole adapté à ce pilote, tant au niveau de la réalisation de la synthèse de latex de polystyrène stabilisé qu’au niveau de l’acquisition de données spectroscopiques. Par la suite, nous avons démontré que la spectroscopie Raman était une technique adaptée au suivi in situ de la cinétique de polymérisation du styrène en macroémulsion. Le suivi du taux de conversion du styrène en polystyrène a été réalisé selon deux méthodes qui reposent sur des principes différents : la première basée sur la variation de l’aire de bandes spécifiques est une approche classique de la quantification de cette grandeur alors que la deuxième, basée sur la modification de la position d’une bande commune au monomère et à son polymère est une méthode innovante. A partir de ces données expérimentales et grâce à une méthode de filtrage adaptée, la quantification de la vitesse de polymérisation a été proposée pour la première fois. Ces données expérimentales ont été comparées à la théorie mécanistique et cinétique de référence de ce procédé, ainsi qu’à de précédents résultats expérimentaux, obtenus par d’autres techniques. Alors que les résultats expérimentaux s’accordent, ils montrent tous une déviation par rapport à la théorie. Enfin, par l’étude approfondie de la variation de l’aire d’une bande de référence, commune au monomère et au polymère, nous avons démontré que la spectroscopie Raman était sensible au phénomène de diffusion élastique, diffusion du faisceau laser par les éléments dispersés dans le milieu réactionnel. Cela se traduit par une modification de l’intensité du signal collecté et permet donc de détecter une transition caractéristique du procédé de polymérisation étudié : la disparition des gouttelettes réservoir de monomère, qui apparaît vers 40% de conversion dans le cas du styrène / The development of in situ monitoring techniques of emulsion polymerization reactions is a real current challenge. First, it may help establish relations between the structure, the physicochemical properties and the performance properties of final latexes. Moreover, it brings a better understanding of chemical and physicochemical phenomenon that happened. Easy installation, performance of measures and abundance of information gathered (from molecular to material scales) make the Raman spectroscopy an adequate technique for this kind of issue, as shown in recent studies. The main goal of that work was to demonstrate the capacity of the Raman spectroscopy to control the polymerization of styrene via macroemulsion process, in terms of smooth reaction process (conversion, …) and final properties of the latex (stability, …). This work was carried in the laboratoire des Matériaux Optiques, Photonique et Systèmes (LMOPS) where a polymerization pilot was implemented for the first time. The latest has been designed in order to ensure a maximum freedom for spectroscopic measurements (optical setup). Because of this special design, the first part of this work was to adapt experimental conditions, in terms of polymer latex synthesis and spectroscopic data acquisition. Thereafter, we proved that Raman spectroscopy could be a suitable technique for real time in situ conversion monitoring in the case of the polymerization of styrene via macroemulsion process. The monomer conversion monitoring has been realized in two different methods: the first one is well-known and is based on monitoring changes in the normalized Raman signal of specific band and the second one is an innovative method that is based on the Ramanshift of a common band of styrene and polystyrene. On the basis of these experimental data and using a suitable smoothing method, the polymerization rate was quantified for the first time. The results were compared to the theory of this polymerization process and previous experimental results from other experimental techniques. Whereas experimental results show similarities, they all show a deviation from the theory. Finally, an in-depth study of the impact of the heterogeneity of the reaction media on the Raman signal has been made. We have demonstrated that this latest was sensitive to elastic scattering of light by dispersed particles. The influence of elastic scattering on the intensity of the collected Raman signal makes the Raman spectroscopy a suitable method to detect a specific transition of the polymerization process: the disappearance of monomer droplets around 40 % of conversion in case of styrene

Esta Dissertação teve como objetivo,a síntese de hidrogéis à base de alginato e nanopartículas magnéticas (maghemita) preparadas in situ. Os hidrogéis foram preparados em diferentes concentrações de alginato de sódio (2 e 3% m/v), FeSO4 (0,3 e 0,5 mol L-1) e CaCl2 (0,1 e 0,3 mol L-1). As propriedades físico-químicas dos hidrogéis foram analisadas e, posteriormente, foram avaliados quanto à capacidade de remoção de íons Ni2+ e Mn2+ de soluções aquosas. Para caracterização das amostras foram utilizadas diversas técnicas de análises, tais como, análise granulométrica, microscopia óptica (OM), microscopia eletrônica de varredura (SEM), microscopia eletrônica de transmissão (TEM), magnetometria de amostra vibrante (VSM), espectroscopia na região do infravermelho por transformada de Fourier (FTIR), difratometria de raios-X (XRD), espectroscopia Mössbauer, e análise termogravimétrica (TGA). Foram preparados hidrogéis com morfologia predominantemente esférica e dimensões micrométricas (500 a 850 m), com átomos de Fe e Ca dispersos uniformemente em sua estrutura. Os hidrogéis apresentaram boa resistência térmica e comportamento superparamagnético. As amostras foram intumescidas em água deionizada durante um intervalo de tempo a fim de avaliar o grau de intumescimento (Q) para determinar a amostra com a melhor resposta para posterior aplicação em solução aquosa contendo íons metálicos (Ni2+ e Mn2+). Os resultados revelaram que a amostra cuja concentração de 3% m/v de alginato de sódio, 0,3 mol L-1 de FeSO4 e 0,3 mol L-1 de CaCl2 obteve maior Q (50%). Em consequência deste resultado, optou-se por utilizar estaamostra, na remoção de metais pesados presentes em soluções aquosas e em efluentes industriais. Vários parâmetros,tais como: tempo de contato,pH, concentração inicial do íon e massa de hidrogel foram estudados.Os resultados, para efluente sintético, revelaram que o tempo de equilíbrio foi de 60 minutos; a capacidade de remoção dos metais melhora com o aumento de pH (3 a 9), sendo máxima em pH 7;quanto menor a concentração inicial da solução iônica (50 a 500 mg L-1), maior a capacidade de remoção, 52% de Ni2+ e 49% de Mn2+ (concentração inicial de 50 mg L-1). No efluente industrial, a remoção foi de 61% de Ni2+ e 57% de Mn2+(300 mg de hidrogel). Os resultados encontrados revelaram que os hidrogéis magnéticos produzidos à base de alginato têm potencial uso no tratamento de efluentes industriais contaminados com metais pesados / This Dissertation aims thesynthesis of hydrogels based on alginate and magnetic nanoparticles (maghemite) prepared in situ. Hydrogels were prepared at different concentrations of sodium alginate (2 and 3% w/v), FeSO4 (0.3 and 0.5 mol L-1) and CaCl2 (0.1 and 0.3 mol L-1). The physicochemical properties of the hydrogels were analyzed and, subsequently, evaluated for their ability to remove ions Ni2+ and Mn2+ from aqueous solutions. In orderto characterize the samples,several techniques were used, such as, granulometric analysis, optical microscopy (OM), scanning electron microscopy (SEM), transmission electron microscopy (TEM), vibrating sample magnetometry (VSM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Mössbauer spectroscopy and thermogravimetry analysis (TGA). Hydrogels with predominant spherical morphology and micrometric dimension were prepared (500 and 850 m) with atoms of Fe and Ca dispersed uniformly in their structure. The hydrogels presented good thermal resistance and superparamagnetic behavior. The samples were swollen in deionized water, for a period of time, to evaluate the swelling degree (Q) and determine the sample with the best result for subsequent application in an aqueous solution containing metallic ions (Ni2+ and Mn2+). The results revealed that the sample with concentration of 3% w/v of sodium alginate, 0.3 mol L-1 of FeSO4, and 0.3 mol L-1 of CaCl2 presented the higher Q (50%). In consequence of this result, we decided to use thissample, in the removal of heavy metals from aqueous solution and industrial wastewater.Several parameters, such as: contact time, pH, initial concentration of ionic solution and hydrogel mass were studied. The results, to the synthetic solution, revealed that the equilibrium time was 60 minutes; the capacity of metals removal improves with the pH increasing (3 to 9), and was maximum at pH 7; the lower the initial concentration of ionic solution (50 to 500 mg L-1), the higher the removal capacity, 52% of Ni2+ and 49% of Mn2+ (initial concentration of 50 mg L-1). In the industrial wastewater, the removal was 61% of Ni2+ and 57% de Mn2+ (300 mg of hydrogel). The results showed that magnetic hydrogels based on alginate synthesized have potential use in the treatment of industrial wastewater contaminated with heavy metals

Submitted by VICTOR BERNARDES BARROSO DA COSTA null (victorbernardes_@hotmail.com) on 2016-03-16T04:08:27Z No. of bitstreams: 1 Dissertação - VICTOR (Versão Final).pdf: 20193346 bytes, checksum: f7da64e79358575f01cf61a5054c4587 (MD5) / Approved for entry into archive by Juliano Benedito Ferreira (julianoferreira@reitoria.unesp.br) on 2016-03-18T12:52:04Z (GMT) No. of bitstreams: 1 costa_vbb_me_sjc.pdf: 20193346 bytes, checksum: f7da64e79358575f01cf61a5054c4587 (MD5) / Made available in DSpace on 2016-03-18T12:52:04Z (GMT). No. of bitstreams: 1 costa_vbb_me_sjc.pdf: 20193346 bytes, checksum: f7da64e79358575f01cf61a5054c4587 (MD5) Previous issue date: 2016-01-21 / Submitted by VICTOR BERNARDES BARROSO DA COSTA null (victorbernardes_@hotmail.com) on 2016-01-26T01:08:29Z No. of bitstreams: 1 Dissertação - VICTOR (Versão Final).pdf: 20193437 bytes, checksum: c041b8e5fa02ed4f74d445c5838128fd (MD5) / Approved for entry into archive by Sandra Manzano de Almeida (smanzano@marilia.unesp.br) on 2016-01-26T13:39:40Z (GMT) No. of bitstreams: 1 costa_vbb_me_sjc.pdf: 20193437 bytes, checksum: c041b8e5fa02ed4f74d445c5838128fd (MD5) / Made available in DSpace on 2016-01-26T13:39:40Z (GMT). No. of bitstreams: 1 costa_vbb_me_sjc.pdf: 20193437 bytes, checksum: c041b8e5fa02ed4f74d445c5838128fd (MD5) Previous issue date: 2016-01-21 / Item merged in doublecheck by Felipe Augusto Arakaki (arakaki@reitoria.unesp.br) on 2016-03-21T13:12:44Z Item was identical to item(s): 135509, 132061 at handle(s): http://hdl.handle.net/11449/136305, http://hdl.handle.net/11449/132945 / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) / Fundação de Amparo à Pesquisa do Estado do Amazonas (FAPEAM) / O carcinoma de células escamosas (CEC) de boca é uma neoplasia incomum em pacientes jovens. Na literatura de língua inglesa não há relatos de estudos que investiguem a amplificação do EGFR e a expressão desta proteína neste grupo etário. O objetivo deste estudo foi investigar a amplificação do EGFR através da técnica de hibridização por fluorescência in situ (FISH) e correlacionar os resultados obtidos através da imunomarcação da proteína EGFR com a epidemiologia e com o prognóstico dos pacientes avaliados. Ao final dos testes de FISH e imuno- histoquímicos, 21 amostras do grupo teste (pacientes ≤ 40 anos) e 39 amostras do grupo controle (pacientes ≥ 50 anos) foram consideradas adequadas para avaliação. As variáveis clínicas e anatomopatológicas foram comparadas pelos testes Qui-Quadrado ou exato de Fisher. A expressão do marcador EGFR e do método de FISH foi comparada entre os grupos por meio do teste não paramétrico de Mann-Whitney. As curvas de sobrevida foram calculadas utilizando o método de Kaplan-Meier e suas curvas foram comparadas através do teste de log-rank. Houve maior número de pacientes do sexo masculino, leucodermas, tabagistas e etilistas. A amplificação do EGFR foi maior no grupo teste (p = 0,018). A amplificação do EGFR associou-se estatisticamente com a variável estadiamento clínico avançado (p = 0,013), independente do grupo. A expressão da proteína EGFR correlacionou-se com tumores bem diferenciados (p = 0,011) e a presença de metástase (p = 0,035), independente da idade. A presença de amplificação foi mais frequente no grupo tese. Alguns casos de pacientes ≥40 anos de idade podem ser adequados ao emprego da terapia anti-EGFR, devido à amplificação do EGFR. / Oral squamous cell carcinoma (OSCC) is uncommon neoplasia in young patients. In the English literature, there are no reports of studies that investigate the amplification of EGFR and expression of this protein in this age group. The aim of this study was to investigate the amplification of EGFR by fluorescence in situ hybridization (FISH) and to correlate the results by immunostaining of EGFR protein with clinicopathological features and prognosis. After FISH and immunohistochemistry, 21 samples of the test group (≤ 40 years) and 39 samples of control group (≥ 50 years) were suitable for evaluating. Categorical variables were compared by the Pearson chi-square test or Fisher's exact test. Associations between protein levels and FISH results with clinicopathological characteristics of the patients were analyzed by Mann-Whitney U test. Survival rates were calculated using the Kaplan-Meier method and the curves were compared by the log-rank test. There was predominance for male patients, leucoderma, smoking and alcohol consumption. The EGFR amplification was higher in the test group (p = 0.018) and it was associated statistically with advanced clinical stage (p = 0.013), independent of the group. The expression of EGFR protein was correlated to well differentiated tumors (p = 0.011) and presence of metastasis (p = 0.035), regardless of age. Presence of EGFR amplification and/or expression. Some cases of patients ≥40 years old might be suitable for anti-EGFR therapy because of EGFR amplification. / FAPEAM: 254/2014

Made available in DSpace on 2016-06-02T20:36:39Z (GMT). No. of bitstreams: 1 4391.pdf: 8625111 bytes, checksum: e00e22df63d1e8465e8dac05269fccb1 (MD5) Previous issue date: 2012-02-16 / Financiadora de Estudos e Projetos / This research project evaluated the changes in the fluxes of nutrients and metals at the sediment-water interface as a result of sediment treatment by the additions of PhoslockTM and calcium nitrate solution. The experiments were executed in situ using mesocosms that were assembled in the Ibirité Reservoir (MG). The calcium nitrate addition experiments showed nutrients flux abatement for Porthophosphate, ammoniacal-N and nitrate-N that were &#8805; 90% whilst for the metals Fe and Mn the percentages reached 48 and 69%, respectively, as a result of sediment oxidation promoted by the intensification of denitrification rates. For the PhoslockTM addition the percentages of reduction in the fluxes across sediment-water interface was over 90% for P-orthophosphate and ammoniacal-N, 78% for nitrate-N and for the metals, Fe and Mn, 47 and 50%, respectively, as a result of the increased adsorption capacity of sediments due an excess of adsorbent material left on sediment surface. / Este projeto avaliou a capacidade de abatimento dos fluxos de metais e nutrientes na interface sedimento-coluna de água da represa de Ibirité (MG), comparando-se duas diferentes tecnologias de remediação de sistemas lacustres, a adição de PhoslockTM e de nitrato de cálcio. Os experimentos foram realizados in situ, com montagem de mesocosmos na citada represa. Os resultados referentes ao tratamento com injeção de nitrato de cálcio mostraram, em função da oxidação dos sedimentos promovida por esta tecnologia, um abatimento dos fluxos de nutrientes (P-ortofosfato, N-amoniacal, N-nitrato) iguais ou superiores a 90%, enquanto que para os metais Fe e Mn, as porcentagens de abatimento de fluxo alcançaram 48 e 69%, respectivamente. Para o tratamento dos sedimentos com a adição de PhoslockTM, devido ao aumento da capacidade de adsorção dos sedimentos promovida pelo excesso de material adsorvente depositado na superfície dos mesmos, as porcentagens de redução dos fluxos sedimento-água foram superiores a 90% para o P-ortofosfato e N-amoniacal, 78% para o N-nitrato, e para os metais (Fe e Mn), 47 e 50%, respectivamente.

La technique d'auto-assemblage couche par couche de polyélectrolytes, permettant de construire des films appelés « multicouches », s'est grandement développée au cours des deux dernières décennies. Cette technique permet non seulement de modifier des surfaces de matériaux mais également d'élaborer des membranes auto-supportées. Dans cette thèse, j'ai étudié la croissance de deux systèmes multicouches assemblés dans des conditions extrêmes de pH pour accélérer leur croissance. Les films à base de poly(ethylene imine) et d'acide poly(acrylique) ont été utilisés pour réaliser, d'une part, des membranes possédant une capacité à répondre à l'humidité, et d'autre part, des membranes asymétriques présentant des propriétés anti-bactériennes. Les films à base de poly(L-lysine) et de hyaluronane ont été réalisé par croissance amplifiée par le pH, et l'effet du poids moléculaire du HA sur la croissance et les propriétés interne des films a été étudié. Ces films ont servi de réservoir pour le piégeage de précurseurs métalliques, qui ont ensuite été réduit in situ par irradiation UV, afin de former des nanoparticules. Ainsi, des films nanocomposites contenant des particules d'argent et des particules d'or ont été synthétisés. / Layer-by-layer assembly has witnessed great development during the two last decades and has expanded its application from surface modification to membrane construction. In this thesis, I studied the buildup of layer-by-layer films assembled at extreme pH (i.e. pH-amplified). I first focused on the fabrication of free-standing film made of poly(ethylene imine) and poly(acrylic acid). An application was to use these films as humidity sensors and a second one was to load silver ions in the films to create anti-bacterial membranes. Then, I worked on poly(L-lysine)/hyaluronan films and I investigated the effect of HA molecular weight on film growth and internal properties. Finally, nanocomposites were made via in situ synthesis of metal NPs in (PLL/HA) films: silver NP loaded (PLL/HA) free-standing films were constructed and their mechanical properties were tested; well dispersed gold NPs with sizes ranging from ~2 nm to ~9 nm were synthesized in (PLL/HA) films.