The focus of this Ph.D. thesis research is a new piezoelectrically driven micromachined ultrasonic atomizer concept that utilizes fluid cavity resonances in the 15 MHz range along with acoustic wave focusing to generate the pressure gradient required for droplet or jet ejection. This ejection technique exhibits low-power operation while addressing the key challenges associated with other atomization technologies including production of sub-5 um diameter droplets, low-temperature operation, the capacity to scale throughput up or down, and simple, low-cost fabrication. This thesis research includes device development and fabrication as well as experimental characterization and theoretical modeling of the acoustics and fluid mechanics underlying device operation. The main goal is to gain an understanding of the fundamental physics of these processes in order to achieve optimal design and controlled operation of the atomizer. Simulations of the acoustic response of the system for various device geometries and different ejection fluid properties predict the resonant frequencies of the device and confirm that pressure field focusing occurs. High-spatial-resolution stroboscopic visualization of fluid ejection under various operating conditions is used to investigate whether the proposed atomizer is capable of operating in either the discrete-droplet or continuous-jet mode. The results of the visualization experiments combined with a scaling analysis provide a basic understanding of the physics governing the ejection process and allow for the establishment of simple scaling laws that prescribe the mode (e.g., discrete-droplet vs. continuous-jet) of ejection. In parallel, a detailed computational fluid dynamics (CFD) analysis of the fluid interface evolution and droplet formation and transport during the ejection process provides in-depth insight into the physics of the ejection process and determines the limits of validity of the scaling laws. These characterization efforts performed in concert with device development lead to the optimal device design. The unique advantages enabled by the developed micromachined ultrasonic atomizer are illustrated for challenging fluid atomization examples from a variety of applications ranging from fuel processing on small scales to ultra-soft electrospray ionization of biomolecules for bioanalytical mass spectrometry.

The objective of the research was to develop fundamental understanding of the process of deposition of complex mixtures by the inkjet method. The rheological properties and DOD drop formation dynamics of carbon black pigmented inkjet inks were investigated. It was found that the suspension microstructure responses to bulk motions, leading to shear rate and time dependent shear viscosity. However, DOD drop formation dynamics of highly pigmented inkjet ink and pure Newtonian fluid is similar even though shear rate up to 105 s-1 exists during inkjet jetting process. A proposed explanation for these observations is that the shearing time during DOD drop ejection is insufficient for changing and stabilizing the microstructure of the suspension. The effects of signal amplitude and jetting frequency on DOD drop formation dynamics of pure Newtonian fluids were investigated. A transition of DOD drop formation dynamics when the inkjet nozzle is switched from idle to jetting was identified. A qualitative investigation of DOD drop impaction and post-impaction behavior on inkjet paper and textiles was carried out. Dynamics of DOD drop accumulation and spreading on the substrates and final ink distribution show drastic differences between these two substrates.

This thesis investigates inkjet-printed flexible antennas fabricated on paper substrates as a system-level solution for ultra-low-cost and mass production of RF structures. These modules are designed for the UHF Radio Frequency Identification (RFID) Tags and Wireless Sensor Nodes (WSN); however the approach could be easily extended to other microwave and wireless applications. Chapter 1 serves as an introduction to RFID technology and its capabilities while listing the major challenges that could potentially hinder RFID practical implementation. Chapter 2 discusses the benefits of using paper as a substrate for high-frequency applications, reporting its very good electrical/dielectric performance up to at least 1 GHz. The dielectric properties are studied by using the microstrip ring resonator. Brief discussion on Liquid Crystal Polymer (LCP) is also given in this chapter. Chapter 3 gives details about the inkjet printing technology, including the characterization of the conductive ink, which consists of nano-silver-particles, while highlighting the importance of this technology as a fast and simple fabrication technique especially on flexible organic (e.g.LCP) or paper-based substrates. Chapter 4 focuses on antenna designs. Four examples are given to provide: i) matching techniques to complex IC impedance, ii) proof of concept of inkjet printing on paper substrate through measurement results, iii) demonstration of a fully-integrated wireless sensor modules on paper and show a 2D sensor integration with an RFID tag module on paper. Chapter 5 concludes the thesis by explaining the importance of this work in creating a first step towards an environmentally friendly generation of "green" RF electronics and modules.

This is a practice-led research project that seeks to explore the cross-cultural aesthetics and conceptual ideas of an art project. I position myself as an art practitioner who intends to apply the Western modes of technological advancement of digital imaging and ink jet technologies to the substrates used by traditional Chinese artists for ink painting and calligraphy, usually called Xuan Zhi [宣紙]. Through this process, the aesthetics and conceptual ideas of both cultures will be explored, examined, analysed and interrogated for the potential development of a new aesthetics in the context of digital art. There are three major components in this research project; a creative document in the form of a collection of artwork, an exegesis and a collection of documentation. The creative document will be a body of visual image-based artwork that includes a series of collateral works from the ongoing research and practice of the project. It is the negotiated output of a potentially new aesthetics in digital art, specifically in the context of digital still imaging and digital printmaking. The exegesis is an analytical and critical commentary that places the creative document in relevant theoretical, philosophical, cultural and historical contexts. The documentation is a collection of the ongoing empirical practice of ink jet technology on Xuan Zhi. The visual physical form of both the exegesis and the documentation are also included as part of the creative document. These three components together form a unity and are presented as artefacts to represent the main focus of the research - the Poetics of Making.

<p>U disertaciji su predstavljena istraživanja uticajnih parametara<br />digitalne štampe na toplotna svojstva odjevnih predmeta, pri čemu su<br />kao parametri procesa štampe ispitani uticaji različitog broja<br />nanosa boje u štampi i različite tonske pokrivenosti. Odštampani<br />uzorci podvrgnuti su ispitivanjima toplotnih karakteristika<br />štampanih tekstilnih materijala. Na bazi analize izabranih<br />parametara razvijen je model toplotnih svojstava štampanih odjevnih<br />predmeta koji ima poseban značaj za predviđanje toplotno fiziološke<br />udobnosti odjeće tokom upotrebe.</p> / <p>У дисертацији су представљена истраживања утицајних параметара<br />дигиталне штампе на топлотна својства одјевних предмета, при чему су<br />као параметри процеса штампе испитани утицаји различитог броја<br />наноса боје у штампи и различите тонске покривености. Одштампани<br />узорци подвргнути су испитивањима топлотних карактеристика<br />штампаних текстилних материјала. На бази анализе изабраних<br />параметара развијен је модел топлотних својстава штампаних одјевних<br />предмета који има посебан значај за предвиђање топлотно физиолошке<br />удобности одјеће током употребе.</p>

The outstanding electrical and mechanical properties of single-walled carbon nanotubes (SWCNTs) may offer solutions to realizing high-mobility and high-bendability thin-film transistors (TFTs) for the emerging flexible electronics. This thesis aims to develop low-cost ink-jet printing techniques for high-performance TFTs based on pristine SWCNTs. The main challenge of this work is to suppress the effects of “metallic SWCNT contamination” and improve the device electrical performance. To this end, this thesis entails a balance between experiments and simulations.   First, TFTs with low-density SWCNTs in the channel region are fabricated by utilizing standard silicon technology. Their electrical performance is investigated in terms of throughput, transfer characteristics, dimensional scaling and dependence on electrode metals. The demonstrated insensitivity of electrical performance to the electrode metals lifts constrains on choosing metal inks for ink-jet printing.   Second, Monte Carlo models on the basis of percolation theory have been established, and high-efficiency algorithms have been proposed for investigations of large-size stick systems in order to facilitate studies of TFTs with channel length up to 1000 times that of the SWCNTs. The Monte Carlo simulations have led to fundamental understanding on stick percolation, including high-precision percolation threshold, universal finite-size scaling function, and dependence of critical conductivity exponents on assignment of component resistance. They have further generated understanding of practical issues regarding heterogeneous percolation systems and the doping effects in SWCNT TFTs.   Third, Monte Carlo simulations are conducted to explore new device structures for performance improvement of SWCNT TFTs. In particular, a novel device structure featuring composite SWCNT networks in the channel is predicted by the simulation and subsequently confirmed experimentally by another research group. Through Monte Carlo simulations, the compatibility of previously-proposed long-strip-channel SWCNT TFTs with ink-jet printing has also been demonstrated.   Finally, relatively sophisticated ink-jet printing techniques have been developed for SWCNT TFTs with long-strip channels. This research spans from SWCNT ink formulation to device design and fabrication. SWCNT TFTs are finally ink-jet printed on both silicon wafers and flexible Kapton substrates with fairly high electrical performance. / QC 20100910

<p>The appearance and design of a package are key properties to attract and to focus the attention of a customer. Print quality contributes to a great degree to achieve these requirements. Most critical perceived in terms of quality are print defects like mottling, gloss and stripiness, which all appear in the printing of corrugated board. Stripiness is especially critical because it is a defect directly caused by the corrugated board construction. A further cause can be generated by the production process of corrugated board. Pre-studies by Odeberg Glasenapp (2004) revealed a difference in surface micro-roughness between the regions on the peak line of the liner and the regions in the valley between two peaks of the corrugation. This knowledge was the basis for the work described in this thesis.</p><p>In a first stage, laboratory trials were conducted with sets of coated and uncoated samples of various grammages. The trial was set-up in order to simulate the conditions in the corrugator as closely as possible. In the evaluations, it was found out that the settings were too high. For that reason, the coated samples were influenced to a too high degree and needed to be excluded from further evaluations. With the uncoated samples, on the other hand, a change in micro surface roughness was detectable. The roughness is decreased on the peaks and the gloss appearance was the conclusion. The analysis of the printed samples focused on shifts in colour and print density. It is unclear if both are affected only surface roughness changes and/or by the typical corrugated board effect of washboarding.</p><p>A full-scale test was performed in order to confirm the results of the laboratory test. A test series was chosen with coated and uncoated outer liners. Contrary to the lab-test results, the uncoated grades showed no surface roughness changes. Instead, the coated samples were affected to a great extent. The changes in surface roughness and gloss appearance were similar to the lab-test. This confirms that the lab-test samples were exposed to heat, pressure and shear to a too high degree. The print analysis of the full-scale test did not agree with the laboratory test. Gloss lines were visually detectable, but they were difficult to measure. A reason could be that the ink is capable on forming an ink film layer on top of the surface of the paper. This would cover the micro roughness of the matt parts thereby creating an almost homogeneous glossy appearance.</p>

EFI Colorproof XF was found to be more convenient from a user’s aspect, and had features which are covered in the ISO 12647-7 standard (e.g. the ability to simulate screening and print margin information), which Photoshop CS3 lacked. None of the proofing systems distinguished itself in a clear way from the other; sometimes, on certain substrates, Photoshop CS3 produced most accurate colours, sometimes EFI Colorproof XF did. Further investigations need to be carried out to tell more exactly which system produce most accurate colours. Only 6 out of 34 simulation-combinations had colours within the tolerances in the standard. The result also shows that the production substrates should not be used as proofing substrates. Instead the proofing papers especially made for ink jet should be used to obtain more colour-accurate prints.

Inkjet-printing is a technology which has for the last decade been exploited to fabricate flexible RF components such as antennas and planar circuit elements. However, the limitations of feature size and single layer fabrication prevented the demonstration of compact, and high efficiency RF components operating above 10 GHz into the mm-Wave regime which is critical to silicon integration and fully-printed modules. To overcome these limitations, a novel vertically-integrated fully inkjet-printed process has been developed and characterized up to the mm-Wave regime which incorporates up to five highly conductive metal layers, variable thickness dielectric layers ranging from 200 nm to 200 um, and low resistance through-layer via interconnects. This vertically-integrated inkjet printed electronics process, tagged VIPRE, is a first of its kind, and is utilized to demonstrate fully additive RF capacitors, inductors, antennas, and RF sensors operating up to 40 GHz. In this work, the first-ever fully inkjet printed multi-layer RF devices operating up to 40 GHz with high-performance are demonstrated, along with a demonstration of the processing techniques which have enabled the printing of multi-layer RF structures with multiple metal layers, and dielectric layers which are orders of magnitude thicker than previoulsy demonstrated inkjet-printed structures. The results of this work show the new possibilities in utilizing inkjet printing for the post-processing of high-efficiency RF inductors, capacitors, and antennas and antenna arrays on top of silicon to reduce chip area requirements, and for the production of entirely printed wireless modules.

This thesis investigates inkjet printing of fully-integrated modules fabricated on organic substrates as a system-level solution for ultra-low-cost and eco-friendly mass production of wireless sensor modules. Prototypes are designed and implemented in both traditional FR-4 substrate and organic substrate. The prototype on organic substrate is referred to as a Smart Wireless Integrated Module (SWIM). Parallels are drawn between FR-4 manufacturing and inkjet printing technology, and recommendations are discussed to enable the potential of inkjet printing technology. Finally, this thesis presents novel applications of SWIM technology in the area of wearable and implantable electronics. Chapter 1 serves as an introduction to inkjet printing technology on organic substrates, wireless sensor networks (WSNs), and the requirements for low-power consumption, low-cost, and eco-friendly technology. Chapter 2 discusses the design of SWIM and its implementation using traditional manufacturing techniques on FR-4 substrate. Chapter 3 presents a benchmark prototype of SWIM on paper substrate. Challenges in the manufacturing process are addressed, and solutions are proposed which suggest future areas of research in inkjet printing technology. Chapter 4 presents novel applications of SWIM technology in the areas of implantable and wearable electronics. Chapter 5 concludes the thesis by discussing the importance of this work in creating a bridge between current inkjet printing technology and its future.