Spelling suggestions: "subject:"tet propulsion"" "subject:"tet propulsiona""
1 |
Jet propulsion experimentsHarper, John Joseph 05 1900 (has links)
No description available.
|
2 |
Theoretical investigation of jet propulsionWilson, Robert E. (Robert Elmer) 05 1900 (has links)
No description available.
|
3 |
et-enhanced turbulent combustionGete, Zenebe January 1991 (has links)
A study of the squish-jet design concept in spark ignition engines, with central ignition, was conducted in a constant volume chamber. The effects of jet size, jet number and jet orientation in generating turbulence and jet enhanced turbulent combustion were investigated. Three sets of configurations with three port sizes were used in this study. The research was carried out in three stages:
1.Qualitative information was obtained from flow visualization experiments via schlieren photography at 1000 frames per second. The flow medium was air. A sequence of frames at specific time intervals were selected to study the results from the respective configurations
and jet sizes. The swirling nature of the flow is vivid in the offset arrangement.
2.Pre-ignition pressure and combustion pressure traces were measured with a piezoelectric
pressure transducer from which characterising parameters such as maximum pressure,
ignition advance and mass burn rate were analysed. Mass fraction curves were calculated
using the simple model of fractional pressure rise. A maximum pressure increase of 66% over the reference quiescent combustion case, and combustion duration reduction of 77% were obtained for the offset arrangement with 2 mm diameter port. Comparisons of the times required for 10%, 50% and 90% mass burned are identified and confirmed that it took the 2 mm jet the shortest time to burn 90% of the mixture in the chamber.
3.Two-component velocity measurements were made using an LDV system. Measurements
were taken in the central vertical plane of the chamber at specified locations. The data collected were window ensemble- averaged for the mean and fluctuating velocities over a number of cycles. Data intermittency and low data rate precluded, however, cycle-by-cycle analysis. Mean tangential velocities were calculated for each case and the data
were used to construct a movie of the tangential velocity as a function of time, suitable for quantitative flow visualization. The vortical nature of the flow was recorded, the distribution being neither solid body rotation nor free vortex, but some complex fluid motion.
The jet scale and orientation influence the in generation of turbulence flow field in the chamber, affecting the rate of combustion and the ensuing maximum pressure rise. The offset jet arrangement gives the best results, whereas radially opposed jets have a reduced effect. Increasing the number of jets in opposed arrangement does not enhance turbulent flow. Turbulent flow in the spark region during the onset of ignition was found to be important. / Applied Science, Faculty of / Mechanical Engineering, Department of / Graduate
|
4 |
A numerical investigation on the influence of engine shape and mixing processes on wave engine performanceErickson, Robert R. January 2004 (has links) (PDF)
Thesis (Ph. D.)--Aerospace Engineering, Georgia Institute of Technology, 2005. / Ben T. Zinn, Committee Chair ; Jeff Jagoda, Committee Member ; Suresh Menon, Committee Member ; Tim Lieuwen, Committee Member ; Rick Gaeta, Committee Member. Vita. Includes bibliographical references.
|
5 |
Numerical and experimental investigations on multiple air jets in counterflow for generating aircraft gas turbine engine inlet flow distortion patternsSivapragasam, M. January 2014 (has links)
The performance of an aircraft gas turbine engine is adversely affected by the non-uniform or distorted flow in the inlet duct. Inlet flow distortion lowers the surge margin of the engine‟s compression system with surge occurring at much lower pressure ratios at all engine speeds. The compressor and/or engine are subjected to ground tests in the presence of inlet distortion to evaluate its performance. The simplest method of simulating inlet distortion during these tests is by installing a distortion screen ahead of the engine on the test bed. The uniform inlet flow to the compressor becomes nonuniform with total pressure loss after passing through the distortion screen. Though the distortion screens offer a number of significant advantages, they have some disadvantages. The air jet distortion system can alleviate many of the operational disadvantages encountered with the conventional distortion screens. The system consists of a number of air jets arranged in a circumferential array in a plane and issuing opposite to the primary air flow entering the engine. The jets interact with the primary stream and cause a local total pressure loss due to momentum exchange. The individual mass flow rates from the jets can be varied to obtain a required total pressure pattern ahead of the compressor at the Aerodynamic Interface Plane (AIP). A systematic study of the flow field of confined, turbulent, incompressible, axisymmetric jet issuing into counterflow is covered in this research programme. The jet penetration length and the jet width are reduced compared to unconfined counterflow and a linear relationship between the velocity ratio and the jet length ceases to be valid. The flow field of a circular compressible turbulent jet and then a system of four jets arranged circumferentially and issuing into a confined counterflow was studied experimentally and numerically. For the four jet system the mass flow rates in the four jets were equal in the first part of the study and in the second part they were unequal. The loss in total pressure due to the jet(s) interacting with the counterflow was quantified by a total pressure loss parameter λp0. The total pressure loss increased with increasing mass flow ratio. The total pressure loss distribution was evaluated at several locations behind the jet injector(s). The total pressure non-uniformity quantified by Distortion Index (DI) was found to be highest at a location just downstream of the jet injector and at far downstream locations low values of DI were observed. From the understanding gained with a single jet and four jets in counterflow a methodology was developed to generate a given total pressure distortion pattern at the AIP. The methodology employs computations to obtain the total pressure distortion at the AIP with quasi-one-dimensional inviscid analysis used as a starting point to estimate the mass flow rate in the jets. The inviscid analysis also provides a direction to the iterative procedure to vary the mass flow rate in the jets at the end of each computational step. The methodology is demonstrated to generate a given total pressure distortion pattern using four jets and is further extended to a larger number of jets, twelve and later twenty jets. The total pressure distortion patterns typical of use in aircraft gas turbine engine testing are generated accurately with a smaller number of jets than reported in the literature.
|
6 |
Hierarchical robust nonlinear switching control design for propulsion systemsLeonessa, Alexander 12 1900 (has links)
No description available.
|
7 |
Experimental investigations of on-axis discrete frequency fan noise.Leggat, Lennox John January 1973 (has links)
The thesis describes experimental techniques used and results obtained in the investigation of the pure tone components of sound radiation from a commercial 19 inch axial flow fan. The causes and extent of the discrete tone sources were investigated by several methods: cross-correlation of fan surface pressure fluctuations with far field sound, spectral analysis of surface pressure, and examination of surface pressure waveforms. A unique feature involved the design of an apparatus for detecting and transmitting fan-borne pressure fluctuations off the rotating blades.
"Causality Correlations" with the on-axis far field sound rendered dipole source strength distribution functions over a span wise line at 15 per cent chord from the leading edge of the fan blade and around a circumferential ring on the motor support strut at a fan radius of 89 per cent.
Results indicate that the on-axis discrete tones are a result of source mechanisms causing force fluctuations on the blades and struts which in turn lead to sound radiation which is dipole in nature and is most intense on the axis of the fan. These mechanisms include ingestion of a concentrated vortex, modulation of the clearance between the blade tips and the fan shroud, flow separation around the inlet bell mouth, and fluctuations in the inflow velocity due to the proximity of the fan to the wedged wall of the Anechoic chamber. Crude integral approximations of source strength distributions over the surfaces of the blades and the struts indicated that sound radiation at the blade passage frequency from these two contributors to the overall sound would be about equal, although more sound radiation is expected to originate at the rotor. / Applied Science, Faculty of / Mechanical Engineering, Department of / Graduate
|
8 |
Performance and stalling behavior of an axial-flow compressor subjected to three circumferential inlet distortion levelsGauden, William H. 28 July 2010 (has links)
The performance and stalling behavior of an axial-flow compressor subjected to several different inlet distortion patterns was investigated. The effect of inlet distortion on overall compressor performance was determined through the measurement of compressor characteristics for each inlet flow condition. Dynamic pressure transducers were employed to investigate rotating stall cell behavior during the inception of stall. Rotor blade response to distorted inflow was measured in the form of average blade pressure profiles by using a scanning valve. Results indicated a substantial reduction in total pressure rise capability for distorted operation. A 25 per cent loss in stall pressure rise was observed for the most severe distortion level. The stall cell was found to rotate in the direction of rotor motion, but at one-half the rotor speed. The cell encompassed the rotor blade tip region down to approximately midspan. During the onset of stall, the circumferential extent of the cell was observed to vary from 60 to 80 degrees. At the rotor blade tip the stall cell relative pressure fluctuations indicated zero flow through the cell. The amplitude of the stall cell was attenuated in the distorted flow region due to the lower air velocity behind the distortion screens. Rotor blade suction side pressure measurements indicated that increasing the circumferential extent of distortion above some "critical" value induced blade stall at higher flow rates. For the low speed compressor used, it appears that the critical angle phenomena is a function of compressor design and is independent of distortion level. / Master of Science
|
9 |
Underwater Robotic Propulsors Inspired by Jetting JellyfishMarut, Kenneth Joseph 04 June 2014 (has links)
Underwater surveillance missions both for defense and civilian applications are continually demanding the need for unmanned underwater vehicles or UUVs. Unmanned vehicles are needed to meet the logistical requirements for operation over long distances, greater depths, long duration, and harsh conditions. In order to design UUVs that not only satisfy these needs but are also adaptive and efficient, there has been increasing interest in taking inspiration from nature. These biomimetic/bio-inspired UUVs are expected to provide significant improvement over the conventional propeller based vehicles by taking advantage of flexible bodies and smart actuation. In this thesis, jetting jellyfish were utilized as the inspiration to understand the fundamentals of this new form of propulsion and subsequently translate the understanding onto the engineered platform to validate the hypothesis and construct robust models. Jetting jellyfish species are generally smaller in dimensions than rowing jellyfish, consume lower energy for transport, and exhibit higher proficiency.
In the second chapter, a bio-inspired stationary jet propulsion mechanism that utilizes an iris diaphragm actuation system was developed. Detailed discussion is provided on the design methodology and factors playing the leading role in controlling the vortex formation. The propulsion mechanism was intended to mimic the morphological and deformation features of Sarsia sp. jellyfish that measures approximately 1 cm in diameter. The performance of experimental model was analyzed and modeled to elucidate the role of structure and fluid displacement.
Utilizing the results from Chapter 2, a free-swimming jellyfish-inspired robot (named JetPRo) was developed (also utilizing an iris diaphragm) in Chapter 3 and characterized for relevant propulsive metrics. A combination of theoretical modeling and experimental analysis was used to optimize the JetPRo's gait for maximum steady-state swimming velocity.
Next, an attempt was made towards creating a free-swimming jetting robot (named JP2) using a guided cable mechanism to achieve the desired actuation and improve the propulsion while simplifying the drive mechanism. Using JP2 robotic model, a systematic set of experiments were conducted and the results were used to refine the theory. Based upon the comprehensive computational analysis, an optimized swimming gait was predicted and then validated.
A modular robot inspired by siphonophores was developed and initial efforts were made in laying down the foundation for understanding of this complex locomotion mechanism. Siphonophores are colonial organisms consisting of several jetting bodies attached to a central stem. An experimental model was developed mimicking the multimodal swimming propulsion utilized by Siphonophores. Several swimming gaits inspired by the natural animal were replicated and the preliminary performance of the experimental model was quantified. Using these results, an analysis is presented towards further improving the design and assembly of a siphonophore-inspired robot. / Master of Science
|
10 |
The Functional Morphology and Ecology of Jet Propulsion Swimming in Larval Dragonflies under Predation from Suction-Feeding FishEdwards, G. Morgan 23 December 2011 (has links)
A functional understanding of how phenotypic traits may affect growth, reproduction and survival is necessary to understand their ecological and evolutionary consequences. Larval dragonflies (Odonata: Anisoptera) swim using jet propulsion, likely controlled by abdominal traits and perhaps to escape fish predators. I investigated whether abdominal morphology explains swimming performance and if either explains the distribution of larvae among ponds that vary in predation risk. I recorded and measured the swimming performance of dragonflies responding to simulated attack and tested relationships with abdominal traits expected to influence jet thrust force generation. Variation in swimming performance was explained by abdomen dry weight, ventral surface area, and abdominal segment 10 width across genera as hypothesized. High-performance dragonflies were more likely to occur in ponds containing predatory fish. This is the first investigation of the morphology responsible for jet propulsion, and the relationship between swimming performance and larval dragonfly ecology.
|
Page generated in 0.0521 seconds