The University of Waterloo Alternative Fuels Team’s participation in EcoCAR: The Next Challenge provided an unparalleled opportunity to execute advanced vehicle technology research with hands on learning and industry leading mentoring from practicing engineers in the automotive industry. This thesis investigates the optimization of the hybrid operating strategy on board the EcoCAR development vehicle. This investigation provides the framework to investigate the pros and cons of different hybrid control strategies, develop the model based design process for controls development in a student team environment and take the learning of this research and apply them to a mule development vehicle. A primary controls development model was created to simulate software controls before releasing to the vehicle level and served as a tool to evaluate and compare control strategies. The optimization routine was not directly compatible with this model and so a compromise was made to develop a simplified vehicle model in the MATLAB environment that would be useful for observing trends but realizing that the accuracy of the results may not be totally consistent with the real world vehicle. These optimization results were then used to create a new control strategy that was simulated in the original vehicle development model. This new control strategy exhibited a 15% gain in fuel economy over the best case from the literature during an Urban Dynamometer Driving Schedule (UDDS) drive cycle. Recommendations for future work include adding charge depletion operation to the simulation test cases and improving the accuracy of the optimization model by removing the simplifications that contributed to faster simulation time. This research has also illustrated the wide variability of drive cycles from the mildly aggressive UDDS cycle having 5 kilowatts average propulsion power to the very aggressive US06 cycle having 19 kilowatts average propulsion power and their impact on the efficiency of a particular control strategy. Understanding how to adapt or tune software for particular drive cycle or driver behaviour may lead to an interesting area of research.

Recent carbon allotropes such as carbon nanotubes (CNTs), fullerenes (C60s) and graphene have attracted great interests in both science and engineering due to their unique properties such as excellent electrical and mechanical properties as well as its vast surface area, and have led to many commercial applications. Especially, CNTs have been considered to be one of the promising candidates in the Li ion battery system because of its outstanding properties. However, the experimental results in the pristine CNT system have shown just slight improvement than original graphitic carbon material, which has been attributed to the weak adsorption of Li on CNTs. In this study, we investigated two types of CNT-C60 hybrid system consisting of CNTs and C60s to improve Li adsorption capabilities and predict its performance through quantum mechanical (QM) computations. First, we investigated adsorption energy of lithium (Li) on dilute CNT-C60 hybrid and CNT-C60 nanobud system as well as various electronic properties such as band structure, density of states (DOS), molecular orbital and charge distribution. Then, we expanded our interest to the more realistic condensed structure of CNT-C60 hybrid and nanobud system to examine actual electrochemical characteristics. The study of the condensed structure has been expanded to the very unique CNT-C60 nano-network system and examined mechanical strength as well as electronic properties. Finally, Li adsorption on other carbon allotropes system such as graphene-C60 hybrid and graphene-C60 bud system was investigated in order to provide fundamental understanding of electronic interaction between carbon allotrope and effect of Li adsorption.

Le cœur de technologie d'une batterie réside principalement dans les matériaux actifs des électrodes, qui est fondamental pour pouvoir stocker une grande quantité de charge et garantir une bonne durée de vie. Le dioxyde d'étain (SnO₂) a été étudié en tant que matériau d'anode dans les batteries Li-ion (LIB) et Na-ion (NIB), en raison de sa capacité spécifique élevée et sa bonne tenue en régimes de puissance élevés. Cependant, lors du processus de charge/décharge, ce matériau souffre d'une grande expansion volumique qui entraîne une mauvaise cyclabilité, ce qui empêche la mise en oeuvre de SnO₂ dans des accumulateurs commerciaux. Aussi, pour contourner ces problèmes, des solutions pour surmonter les limites de SnO₂ en tant qu'anode dans LIB / NIB seront présentées dans cette thèse. La partie initiale de la thèse est dédié à la production de SnO₂ et de RGO (oxyde de graphène réduit)/SnO₂ par pyrolyse laser puis à sa mise en oeuvre en tant qu'anode. La deuxième partie s'attarde à étudier l'effet du dopage de l'azote sur les performances et permet de démontrer l'effet positif sur le SnO₂ dans les LIB, mais un effet néfaste sur les NIB. La partie finale de la thèse étudie l'effet de l'ingénierie matricielle à travers la production d'un composé ZnSnO₃. Enfin, les résultats obtenus sont comparés avec l'état de l'art et permettent de mettre en perspectives ces travaux. / The heart of battery technology lies primarily in the electrode material, which is fundamental to how much charge can be stored and how long the battery can be cycled. Tin dioxide (SnO₂) has received tremendous attention as an anode material in both Li-ion (LIB) and Na-ion (NIB) batteries, owing to benefits such as high specific capacity and rate capability. However, large volume expansion accompanying charging/discharging process results in poor cycleability that hinders the utilization of SnO₂ in commercial batteries. To this end, engineering solutions to surmount the limitations facing SnO₂ as an anode in LIB/NIB will be presented in this thesis. The initial part of the thesis focuses on producing SnO₂ and rGO (reduced graphene oxide)/SnO₂ through laser pyrolysis and its application as an anode. The following segment studies the effect of nitrogen doping, where it was found to have a positive effect on SnO₂ in LIB, but a detrimental effect in NIB. The final part of the thesis investigates the effect of matrix engineering through the production of a ZnSnO₃ compound. Finally, the obtained results will be compared and to understand the implications that they may possess.

Doctor of Philosophy / Department of Chemistry / Jun Li / Nanostructured electrode materials for electrochemical energy storage systems have been shown to improve both rate performance and capacity retention, while allowing considerably longer cycling lifetime. The nano-architectures provide enhanced kinetics by means of larger surface area, higher porosity, better material interconnectivity, shorter diffusion lengths, and overall mechanical stability. Meanwhile, active materials that once were excluded from use due to bulk property issues are now being examined in new nanoarchitecture. Silicon was such a material, desired for its large lithium-ion storage capacity of 4,200 mAh g[superscript]-1 and low redox potential of 0.4 V vs. Li/Li[superscript]+; however, a ~300% volume expansion and increased resistivity upon lithiation limited its broader applications. In the first study, the silicon-coated vertically aligned carbon nanofiber (VACNF) array presents a unique core-shell nanowire (NW) architecture that demonstrates both good capacity and high rate performance. In follow-up, the Si-VACNFs NW electrode demonstrates enhanced power rate capabilities as it shows excellent storage capacity at high rates, attributed to the unique nanoneedle structure that high vacuum sputtering produces on the three-dimensional array. Following silicon’s success, titanium dioxide has been explored as an alternative highrate electrode material by utilizing the dual storage mechanisms of Li+ insertion and pseudocapacitance. The TiO[subscript]2-coated VACNFs shows improved electrochemical activity that delivers near theoretical capacity at larger currents due to shorter Li[superscript]+ diffusion lengths and highly effective electron transport. A unique cell is formed with the Si-coated and TiO[subscript]2-coated electrodes place counter to one another, creating the hybrid of lithium ion battery-pseudocapacitor that demonstrated both high power and high energy densities. The hybrid cell operates like a battery at lower current rates, achieving larger discharge capacity, while retaining one-third of that capacity as the current is raised by 100-fold. This showcases the VACNF arrays as a solid platform capable of assisting lithium active compounds to achieve high capacity at very high rates, comparable to modern supercapacitors. Lastly, manganese oxide is explored to demonstrate the high power rate performance that the VACNF array can provide by creating a supercapacitor that is highly effective in cycling at various high current rates, maintaining high-capacity and good cycling performance for thousands of cycles.

Master of Science / Mechanical and Nuclear Engineering / Kevin B. Lease / Gurpreet Singh / Energy has always been one of the most important factors in any type of human or industrial endeavor. Clean energy and alternative energy sources are slowly but steadily replacing fossil fuels, the over-dependence on which have led to many environmental and economic troubles over the past century. The main challenge that needs to be addressed in switching to clean energy is storing it for use in the electrical grid and transportation systems. Lithium ion batteries are currently one of the most promising energy storage devices and tremendous amount of research is being done in high capacity anode and cathode materials, and better electrolytes and battery packs as well, leading to overall high efficiency and capacity energy storage systems. Polymer derived ceramics (PDCs) are a special class of ceramics, usually used in high temperature applications, but some silicon based PDCs have demonstrated good electrochemical properties in lithium ion batteries. The goal of this research is to explore a special hybrid ceramic of titanium dioxide (TiO₂) and silicon oxy carbide (SiOC) ceramic derived from 1,3,5,7 -- tetravinyl -- 1,3,5,7 -- tetramethylcyclotetrasiloxane (TTCS) polymer for use in lithium ion batteries and investigate the source of its properties which might make the ceramic particularly useful in some highly specialized energy storage applications.

Le travail présenté dans ce mémoire concerne la réalisation des batteries souples lithium-ion. Il a comme objectif le développement de nouveaux procédés comme l'impression par sérigraphie pour la fabrication de batteries et le remplacement des polymères issus de la chimie de synthèse par des matériaux bio-sourcés utilisables en milieu aqueux. Les résultats obtenus ont montré qu'il est possible de formuler des encres aqueuses à base des matériaux actifs classiquement utilisés pour l'élaboration d'électrodes (anode et cathode) de batterie Li-ion mais avec des liants dérivés de cellulose en substitution du PVDF qui intègre les formulations standards. Cette encre, dont les propriétés rhéologiques sont compatibles avec le procédé d'impression sérigraphique, permet l'obtention d'électrodes présentant des propriétés spécifiques aux bons fonctionnements de la batterie. Les résultats obtenus ont montré que cette technique d'impression du séparateur pouvait être utilisée pour remplacer la technique de déposition classique des matières actives sur les collecteurs de courant, basée sur un procédé d'enduction à lame (blade coating). Enfin, une batterie lithium-ion imprimée a pu être élaborée en utilisant la stratégie d'impression recto/verso du séparateur avec l'intégration des collecteurs de courant pendant la phase d'impression, validant ainsi cette nouvelle technique d'assemblage. / The work presented in this manuscript describes the manufacturing of lithium-ion batteries on papers substrates by printing technique. Its aim is the development of new up scalable and large area techniques as screen printing for the fabrication of lithium-ion batteries and the replacement of conventional toxic components by bio-sourced one and water based solvent. First results shows how it is possible to formulate cellulose based ink tailored for screen printing technology with suitable properties for lithium-ion batteries requirements. Electrodes were manufactured and tested from a physical and electrochemical point of view and two strategies were proposed to enhance performances. Finally, by considering results obtained for the electrodes, a full cell was manufactured with a new assembling strategy based on: front / reverse printing approach and the embedding of the current collectors during printing stage. As a final point cells were characterized and compared with others obtained by conventional assembling strategies.

Made available in DSpace on 2014-06-11T19:23:26Z (GMT). No. of bitstreams: 0 Previous issue date: 2009-07-31Bitstream added on 2014-06-13T18:09:34Z : No. of bitstreams: 1 zanatta_cs_me_bauru.pdf: 2567546 bytes, checksum: b92343b4c48fcdf306ed6a95bf902804 (MD5) / Materiais nanoestruturados vêm sendo amplamente estudados pela comunidade científica, devido às suas propriedades únicas obtidas com o controle da síntese dos materiais. Por meio do controle experimental, esses materiais podem ser utilizados em numerosas áreas, tais como na eletrônica e na fotônica. Dentre os vários métodos químicos, o processo poliol vem sendo utilizado devido à fácil obtenção de nanopartículas de óxidos e metais na sua forma elementar. O presente trabalho teve como objetivo a síntese do óxido de zinco nanoestruturado por meio do método poliol. Diferentes precursores metálicos, tais como acetato de zinco dihidratado, nitrato de zinco hexahidratado, sulfato de zinco monohidratado e cloreto de zinco anidro e diferentes tempos de permanência da síntese foram utilizados para verificar possíveis interferências dos ânions precursores na síntese e na morfologia do óxido de zinco quando obtido. Os materiais obtidos das sínteses foram caracterizados por difração de raios X (DRX), análises térmicas (TG/DTA), medidas de adsorção de gás nitrogênio, microscopia eletrônica de varredura (MEV), microscopia eletrônica de varredura de alta resolução (MEV-FEG) e cronopotenciometria. Por meio destas técnias mostrou-se a viabilidade da obtenção do óxido de zinco nanoestruturado dd maneira direta a partir do acetato de zinco, através de refluxo em etilenoglicol por 2, 4 e 8 horas seguido de lavagem e centrifugação. A menor nanoestrutura encontrada apresentou partículas com dimensão de aproximadamente 25 nm e formato poliédrico, as quais foram observadas pelo FEG. A técnica de cronopotenciometria, representada por meio das curvas de carga/descarga mostraram que a utilização do compósito contendo o óxido de zinco sintetizado apresenta melhores resultados quando comparados ao uso... / Nanostructered materials have been extensively studied by the scientific community due to their unique properties obtained by controlled synthesis of materials. By means of the control of parameters, this new materials can be used in a number of applications in electronic and photonic technology. Among the several methods to obtain nanoparticles or nanostructured materials, the polyol method has been applied because it shows easy procedures to produce nanostructured oxides and elemental metals. The aim of this work is the synthesis of nanostructured zinc oxide, one of the most multifunctional oxides, by the polyol method. Different precursors salts like zinc acetate dihydrate, zinc nitrate hexahydrate, zinc sulfate monohydrate and zinc chloride anhydrate, as well as several times of reflux, were used to investigate the influence of the precursos anions on the synthesis and on the morphology of the crystals of zinc oxide whenever produced. The obtained powders were characterized by X-ray diffraction (DRX), thermal analyses (TG/DTA), and measurements of 'N IND. 2' gas adsorption, scanning electronic and field emission microscopy (MEV and FEG) and chronopotentiometry. These techniques showed the possibility of producing nanostructured zinc oxide in direct way from the reflux in etylenglycol for 2, 4 and 8 hours, followed by washing and centrifugation. The smallest nanostructure observed by FEG presented around 25 nm polyhedral particles. The chronopotentiometry, present charge/discharge curves showing better results for the electrode made of polimer composite containing ZnO nanoparticles than the obtaining results for the oxide alone. The best results showed reversibility of the lithium-ion cell upon 20 cycles, applying 3 μΑ electric current and showing a charge potential up to 4.2 V.

No description available.

Neste trabalho, foi desenvolvido um material híbrido inédito carvão ativado/nanotubos de carbono/nanopartículas de prata para as aplicações em bateria de íons de lítio e capacitor eletroquímico de dupla camada. O compósito foi preparado por crescimento dos nanotubos de carbono diretamente sobre o carvão ativado via deposição química de vapor e depois nanopartículas de prata foram incorporadas no carvão ativado/nanotubos de carbono. A morfologia do compósito foi analisada por microscopia eletrônica de varredura. Investigação das propriedades de intercalação de lítio no carvão ativado (CA), carvão ativado/nanotubos de carbono (CA/NTC), carvão ativado/prata (CA/Ag) e carvão ativado/nanotubos de carbono/prata (CA/NTC/Ag) foi conduzida por voltametria cíclica e ciclos de carga/descarga, utilizando dois diferentes eletrólitos. Verificou-se que o ânodo de CA/NTC/Ag apresenta mais elevado valor de capacidade específica reversível que a grafita em eletrólito comercial, provavelmente devido à rede tridimensional com elevada condutividade eletrônica formada por nanotubos de carbono e nanopartículas de prata nos poros e nas rugosidades do substrato. Além disso, os nanotubos de carbono podem exibir elevada capacidade de armazenamento de lítio. Outra vantagem do CA/NTC/Ag é que a rede de nanotubos de carbono acomoda a expansão de volume das partículas de prata durante a ciclagem do eletrodo, mantendo-as bem adsorvidas na superfície do CA/NTC. Os resultados confirmaram a existência do sinergismo entre os componentes do CA/NTC/Ag, que promove características eletroquímicas superiores àquelas dos constituintes isolados. / In this work, an unpublished hybrid material activated carbon/carbon nanotubes/silver nanoparticles was developed for lithium ion battery and electrochemical double layer capacitor applications. The composite was prepared by growing carbon nanotubes directly on the activated carbon via chemical vapor deposition and after silver nanoparticles were incorporated on the activated carbon/carbon nanotubes. The composites morphology was analyzed by scanning electron microscopy. Investigation of lithium intercalation properties in activated carbon (AC), activated carbon/carbon nanotubes (AC/CNT), activated carbon/silver (AC/Ag) and activated carbon/carbon nanotubes/silver (AC/CNT/Ag) was carried out by cyclic voltammetry and charge/discharge cycles by making use of two different electrolytes. It was found that the AC/CNT/Ag anode presents higher reversible specific capacity value in comparison with graphite in commercial electrolyte, probably due to the three dimensional network with high electronic conductivity formed by carbon nanotubes and silver nanoparticles in the substrates pores and roughness. Furthermore, carbon nanotubes can exhibit high lithium storage capacity. Another advantage of the AC/CNT/Ag is that the network of carbon nanotubes accommodates volume expansion of the silver particles during electrode cycling, keeping them well adsorbed on the surface of the AC/CNT. The results confirmed the existence of synergism between the components of the AC/CNT/Ag, which promotes electrochemical characteristics that are higher than those of the individual constituents.

Materiais auto-organizados constituídos de V2O5 xerogel, poli(etilenoimina) (PEI) e nanopartículas de carbono (NpCs) foram obtidos por meio da técnica camada-por-camada (LbL). A metodologia aplicada permitiu a obtenção de filmes finos com elevado controle de espessura além de permitir um crescimento linear dos filmes, denominados neste trabalho V2O5/PEI e V2O5/PEI/NpCs. Além disso, o desempenho eletroquímico dos materiais auto-organizados foi comparado a um eletrodo de V2O5. Análises de FTIR mostraram que interações específicas entre os grupos amina do PEI e os grupos carboxila do V2O5 são responsáveis pelo crescimento do filme. Estas interações permitem a formação de um campo eletrostático capaz de blindar as interações entre os íons lítio e os oxigênios da vanadila (V=O) e, por consequência, são responsáveis pelo aumento na mobilidade iônica dos íons lítio no interior da matriz hospedeira e, portanto, um aumento na capacidade de armazenamento de carga. Resultados obtidos através de medidas de carga/descarga mostram que o V2O5/PEI/NpCs apresenta uma melhor desempenho do que os demais materiais estudados neste trabalho. Estes resultados mostram que a capacidade específica do V2O5/PEI/NpCs foi de 137 mA h g-1 para a menor densidade de corrente aplicada e aproximadamente 1,6 vezes maior do que os valores de capacidade específica para os outros materiais para a maior densidade de corrente aplicada. Além disso, estas medidas permitiram a observação de uma menor variação na razão estequiométrica máxima (xmáx) em função das densidades de corrente aplicadas para os filmes auto-organizados, fato este relacionado a uma maior mobilidade iônica dos íons lítio no interior dessas matrizes. Os resultados obtidos a partir de espectroscopia de impedância eletroquímica (EIS) mostraram que a difusão dos íons lítio no interior das matrizes auto-organizadas é maior do que no caso do V2O5, cujos valores do coeficiente de difusão foram de 1,64 x 10-15, 1,21 x 10-14 e 2,26 x 10-14 cm2 s-1 para os filmes V2O5, V2O5/PEI e V2O5/PEI/NpCs, respectivamente. Sendo assim, o polímero e as NpCs promoveram novos caminhos condutores e permitiram a conexão elétrica entre camadas isoladas da matriz V2O5. Dessa forma, novos nanocompósitos foram obtidos visando demonstrar o método de auto-organização empregado para melhorar o transporte de carga em matrizes hospedeiras. / Self-assembled materials constituted of V2O5 xerogel, poly (ethyleneimine) (PEI), and carbon nanoparticles (CNPs) were obtained by the layer-by-layer (LbL) technique. The applied methodology permitted the obtainment of thin films with high thickness control and also permitted a linear growth of the films, which will be named V2O5/PEI and V2O5/PEI/CNPs. Besides, the electrochemical performance of the self-assembled materials was compared to a V2O5 electrode. FTIR analyses showed that the specific interactions between the amine groups of PEI and the vanadyl groups of the V2O5 are responsible for the film growth. These interactions permitted the formation of an electrostatic shield capable of hindering the interactions between the lithium ions and the vanadyl oxygen atoms (V=O) and are consequently responsible for the enhancement on the ionic mobility of the lithium ions within the host matrix, leading to a higher energy storage capability. Results obtained by the charge/discharge measurements showed that V2O5/PEI/CNPs presents a better performance than the other materials studied for this research. These results demonstrated that the specific capacity of the V2O5/PEI/CNPs was 137 mA h g-1 under the lowest current density applied and approximately 1.6 times higher than the specific capacity values obtained for the other materials under the highest current density applied. Moreover, it was observed that the variation of the maximum stoichiometric ratio (xmax) as a function of the current density is lower for the self-assembled materials than for the V2O5 electrode, which can be related to the higher ionic mobility of the lithium ion within the self-assembled materials. Electrochemical Impedance Spectroscopy (EIS) data demonstrated that the diffusion of the lithium ions within the self-assembled materials is higher than within the V2O5 electrode, and the diffusion coefficients were 1.64 x 10-15, 1.21 x 10-14 e 2.26 x 10-14 cm2 s-1 for V2O5, V2O5/PEI and V2O5/PEI/CNPs, respectively. Thus, the polymer and the CNPs provided new conducting pathways and connected isolated V2O5 chains in the host matrix. Therefore, novel spontaneous nanocomposites were formed, aiming to demonstrate the self-assembled method adopted for improving charge transport within host matrices.