No description available.

No description available.

The lymphatic system plays an important role in protein and solute transport as well as the immune system. Its functionality is vital to proper homeostasis and fluid balance. Lymphatic fluid (lymph) may be propelled by intrinsic (active) vessel pumping or passively. With regard to the former, nitric oxide (NO) is known to play an important role in lymphatic vessel contraction and vasodilation. Lymphatic endothelial cells (LECs) are sensitive to shear and increases in flow have been shown to cause enhanced production of NO by LECs. Additionally, high concentrations of NO have been experimentally observed in the sinus region of mesenteric lymphatic vessels. The goal of this work was to develop a computational flow and mass transfer model using physiologic geometries obtained from confocal images of a rat mesenteric lymphatic vessel to determine the characteristics of NO transport in the lymphatic flow regime. Both steady and unsteady analyses were performed. Steady models were simulated by prescribing fully developed velocity profiles ranging from 0.5 mm s^-1 to 7 mm s^-1 as the inlet boundary conditions. Unsteady simulations were generated using a velocity profile taken from experimental data from in situ experiments with rats. Production of NO was shear-dependent; basal cases using constant production were also generated. Simulations revealed areas of flow stagnation adjacent to the valve leaflets, suggesting the high concentrations observed here experimentally are due to lack of convection in this region. LEC sensitivity was found to alter the concentration of NO in the vessel, and the convective forces were found to profoundly affect the concentration of NO at a Peclet value greater than or equal to approximately 61. The quasi-steady analysis was able to resolve wall shear stress within 0.15% of the unsteady case. However, the percent error between unsteady and quasi-steady conditions was higher for NO concentration (approximately 6.7%).

The lower continental slope of Morocco’s west coast consists of Triassic-age salt manifested in the form of diapirs, tongues, sheets, and canopies, and both extensional and compressional structures that result from salt movements. Salt diapirism and regional tectonics greatly influenced a broad spectrum of depositional processes along the margin. Mapping of a 1064-km² (411-mi²) seismic survey acquired in the Safi Haute Mer area reveals that Jurassic to Holocene salt mobilization has induced sedimentation that manifests itself in gravity slumps and slides and debris flows. An east-west–trending structural anticline located downdip of the salt-influenced region, was activated during the Atlas uplift (latest Cretaceous) and shaped much of the lower continental slope morphology from Tertiary time until present. The largest of the mass transport deposits (MTC) is a 500-m (1640-ft)-thick Cretaceous-age unit that spans an area of up to 20,000 km2 (7722 mi2). Seismic facies composing the MTC are (1) chaotic, mounded reflectors; (2) imbricated continuous to discontinuous folded reflector packages interpreted to represent internal syn-depositional thrusts; and (3) isolated, thick packages of continuous reflectors interpreted to represent transported megablocks (3.3 km2 [1.3 mi2]). The latter show well preserved internal stratigraphy. The MTCs originated from an upslope collapse of a narrow shelf during the earliest phases of the Alpine orogeny. Seismic geomorphologic analysis of the non-salt-deformed sections reveal numerous linear features that are interpreted as migrating Mesozoic-age deepmarine sediment waves. Three styles of sediment waves have been identified. These include: (1) type J1—small (less than 17 m thick) and poorly imaged, Jurassic in age, ridges that have wavelengths of up to 12 km and crest-to-crest separations of less than 1 km; (2) type K1—early Aptian constructional sediment waves (~110 m thick) that appear to show some orientation and size variations which suggest an influence on currents by salt-influenced seafloor topography, and (3) type K2—latest Albian and earliest post-Albian sediment waves exhibiting wave heights of 40 m and crest-to-crest separations of 1 km, that are continuous across the entire study area and show evidence of up-slope migration. / text

The lower continental slope of Morocco’s west coast consists of Triassic-age salt manifested in the form of diapirs, tongues, sheets, and canopies, and both extensional and compressional structures that result from salt movements. Salt diapirism and regional tectonics greatly influenced a broad spectrum of depositional processes along the margin. Mapping of a 1064-km2 (411-mi2) seismic survey acquired in the Safi Haute Mer area reveals that Jurassic to Holocene salt mobilization has induced sedimentation that manifests itself in gravity slumps and slides and debris flows. An east-west–trending structural anticline located downdip of the salt-influenced region, was activated during the Atlas uplift (latest Cretaceous) and shaped much of the lower continental slope morphology from Tertiary time until present. The largest of the mass transport deposits (MTC) is a 500-m (1640-ft)-thick Cretaceous-age unit that spans an area of up to 20,000 km2 (7722 mi2). Seismic facies composing the MTC are (1) chaotic, mounded reflectors; (2) imbricated continuous to discontinuous folded reflector packages interpreted to represent internal syn-depositional thrusts; and (3) isolated, thick packages of continuous reflectors interpreted to represent transported megablocks (3.3 km2 [1.3 mi2]). The latter show well preserved internal stratigraphy. The MTCs originated from an upslope collapse of a narrow shelf during the earliest phases of the Alpine orogeny. Seismic geomorphologic analysis of the non-salt-deformed sections reveal numerous linear features that are interpreted as migrating Mesozoic-age deepmarine sediment waves. Three styles of sediment waves have been identified. These include: (1) type J1—small (less than 17 m thick) and poorly imaged, Jurassic in age, ridges that have wavelengths of up to 12 km and crest-to-crest separations of less than 1 km; (2) type K1—early Aptian constructional sediment waves (~110 m thick) that appear to show some orientation and size variations which suggest an influence on currents by salt-influenced seafloor topography, and (3) type K2—latest Albian and earliest post-Albian sediment waves exhibiting wave heights of 40 m and crest-to-crest separations of 1 km, that are continuous across the entire study area and show evidence of up-slope migration.

The lower continental slope of Morocco’s west coast consists of Triassic-age salt manifested in the form of diapirs, tongues, sheets, and canopies, and both extensional and compressional structures that result from salt movements. Salt diapirism and regional tectonics greatly influenced a broad spectrum of depositional processes along the margin. Mapping of a 1064-km2 (411-mi2) seismic survey acquired in the Safi Haute Mer area reveals that Jurassic to Holocene salt mobilization has induced sedimentation that manifests itself in gravity slumps and slides and debris flows. An east-west–trending structural anticline located downdip of the salt-influenced region, was activated during the Atlas uplift (latest Cretaceous) and shaped much of the lower continental slope morphology from Tertiary time until present. The largest of the mass transport deposits (MTC) is a 500-m (1640-ft)-thick Cretaceous-age unit that spans an area of up to 20,000 km2 (7722 mi2). Seismic facies composing the MTC are (1) chaotic, mounded reflectors; (2) imbricated continuous to discontinuous folded reflector packages interpreted to represent internal syn-depositional thrusts; and (3) isolated, thick packages of continuous reflectors interpreted to represent transported megablocks (3.3 km2 [1.3 mi2]). The latter show well preserved internal stratigraphy. The MTCs originated from an upslope collapse of a narrow shelf during the earliest phases of the Alpine orogeny. Seismic geomorphologic analysis of the non-salt-deformed sections reveal numerous linear features that are interpreted as migrating Mesozoic-age deepmarine sediment waves. Three styles of sediment waves have been identified. These include: (1) type J1—small (less than 17 m thick) and poorly imaged, Jurassic in age, ridges that have wavelengths of up to 12 km and crest-to-crest separations of less than 1 km; (2) type K1—early Aptian constructional sediment waves (~110 m thick) that appear to show some orientation and size variations which suggest an influence on currents by salt-influenced seafloor topography, and (3) type K2—latest Albian and earliest post-Albian sediment waves exhibiting wave heights of 40 m and crest-to-crest separations of 1 km, that are continuous across the entire study area and show evidence of up-slope migration.

The lower continental slope of Morocco’s west coast consists of Triassic-age salt manifested in the form of diapirs, tongues, sheets, and canopies, and both extensional and compressional structures that result from salt movements. Salt diapirism and regional tectonics greatly influenced a broad spectrum of depositional processes along the margin. Mapping of a 1064-km2 (411-mi2) seismic survey acquired in the Safi Haute Mer area reveals that Jurassic to Holocene salt mobilization has induced sedimentation that manifests itself in gravity slumps and slides and debris flows. An east-west–trending structural anticline located downdip of the salt-influenced region, was activated during the Atlas uplift (latest Cretaceous) and shaped much of the lower continental slope morphology from Tertiary time until present. The largest of the mass transport deposits (MTC) is a 500-m (1640-ft)-thick Cretaceous-age unit that spans an area of up to 20,000 km2 (7722 mi2). Seismic facies composing the MTC are (1) chaotic, mounded reflectors; (2) imbricated continuous to discontinuous folded reflector packages interpreted to represent internal syn-depositional thrusts; and (3) isolated, thick packages of continuous reflectors interpreted to represent transported megablocks (3.3 km2 [1.3 mi2]). The latter show well preserved internal stratigraphy. The MTCs originated from an upslope collapse of a narrow shelf during the earliest phases of the Alpine orogeny. Seismic geomorphologic analysis of the non-salt-deformed sections reveal numerous linear features that are interpreted as migrating Mesozoic-age deepmarine sediment waves. Three styles of sediment waves have been identified. These include: (1) type J1—small (less than 17 m thick) and poorly imaged, Jurassic in age, ridges that have wavelengths of up to 12 km and crest-to-crest separations of less than 1 km; (2) type K1—early Aptian constructional sediment waves (~110 m thick) that appear to show some orientation and size variations which suggest an influence on currents by salt-influenced seafloor topography, and (3) type K2—latest Albian and earliest post-Albian sediment waves exhibiting wave heights of 40 m and crest-to-crest separations of 1 km, that are continuous across the entire study area and show evidence of up-slope migration.

The lower continental slope of Morocco’s west coast consists of Triassic-age salt manifested in the form of diapirs, tongues, sheets, and canopies, and both extensional and compressional structures that result from salt movements. Salt diapirism and regional tectonics greatly influenced a broad spectrum of depositional processes along the margin. Mapping of a 1064-km2 (411-mi2) seismic survey acquired in the Safi Haute Mer area reveals that Jurassic to Holocene salt mobilization has induced sedimentation that manifests itself in gravity slumps and slides and debris flows. An east-west–trending structural anticline located downdip of the salt-influenced region, was activated during the Atlas uplift (latest Cretaceous) and shaped much of the lower continental slope morphology from Tertiary time until present. The largest of the mass transport deposits (MTC) is a 500-m (1640-ft)-thick Cretaceous-age unit that spans an area of up to 20,000 km2 (7722 mi2). Seismic facies composing the MTC are (1) chaotic, mounded reflectors; (2) imbricated continuous to discontinuous folded reflector packages interpreted to represent internal syn-depositional thrusts; and (3) isolated, thick packages of continuous reflectors interpreted to represent transported megablocks (3.3 km2 [1.3 mi2]). The latter show well preserved internal stratigraphy. The MTCs originated from an upslope collapse of a narrow shelf during the earliest phases of the Alpine orogeny. Seismic geomorphologic analysis of the non-salt-deformed sections reveal numerous linear features that are interpreted as migrating Mesozoic-age deepmarine sediment waves. Three styles of sediment waves have been identified. These include: (1) type J1—small (less than 17 m thick) and poorly imaged, Jurassic in age, ridges that have wavelengths of up to 12 km and crest-to-crest separations of less than 1 km; (2) type K1—early Aptian constructional sediment waves (~110 m thick) that appear to show some orientation and size variations which suggest an influence on currents by salt-influenced seafloor topography, and (3) type K2—latest Albian and earliest post-Albian sediment waves exhibiting wave heights of 40 m and crest-to-crest separations of 1 km, that are continuous across the entire study area and show evidence of up-slope migration.

The lower continental slope of Morocco’s west coast consists of Triassic-age salt manifested in the form of diapirs, tongues, sheets, and canopies, and both extensional and compressional structures that result from salt movements. Salt diapirism and regional tectonics greatly influenced a broad spectrum of depositional processes along the margin. Mapping of a 1064-km2 (411-mi2) seismic survey acquired in the Safi Haute Mer area reveals that Jurassic to Holocene salt mobilization has induced sedimentation that manifests itself in gravity slumps and slides and debris flows. An east-west–trending structural anticline located downdip of the salt-influenced region, was activated during the Atlas uplift (latest Cretaceous) and shaped much of the lower continental slope morphology from Tertiary time until present. The largest of the mass transport deposits (MTC) is a 500-m (1640-ft)-thick Cretaceous-age unit that spans an area of up to 20,000 km2 (7722 mi2). Seismic facies composing the MTC are (1) chaotic, mounded reflectors; (2) imbricated continuous to discontinuous folded reflector packages interpreted to represent internal syn-depositional thrusts; and (3) isolated, thick packages of continuous reflectors interpreted to represent transported megablocks (3.3 km2 [1.3 mi2]). The latter show well preserved internal stratigraphy. The MTCs originated from an upslope collapse of a narrow shelf during the earliest phases of the Alpine orogeny. Seismic geomorphologic analysis of the non-salt-deformed sections reveal numerous linear features that are interpreted as migrating Mesozoic-age deepmarine sediment waves. Three styles of sediment waves have been identified. These include: (1) type J1—small (less than 17 m thick) and poorly imaged, Jurassic in age, ridges that have wavelengths of up to 12 km and crest-to-crest separations of less than 1 km; (2) type K1—early Aptian constructional sediment waves (~110 m thick) that appear to show some orientation and size variations which suggest an influence on currents by salt-influenced seafloor topography, and (3) type K2—latest Albian and earliest post-Albian sediment waves exhibiting wave heights of 40 m and crest-to-crest separations of 1 km, that are continuous across the entire study area and show evidence of up-slope migration.

The lower continental slope of Morocco’s west coast consists of Triassic-age salt manifested in the form of diapirs, tongues, sheets, and canopies, and both extensional and compressional structures that result from salt movements. Salt diapirism and regional tectonics greatly influenced a broad spectrum of depositional processes along the margin. Mapping of a 1064-km2 (411-mi2) seismic survey acquired in the Safi Haute Mer area reveals that Jurassic to Holocene salt mobilization has induced sedimentation that manifests itself in gravity slumps and slides and debris flows. An east-west–trending structural anticline located downdip of the salt-influenced region, was activated during the Atlas uplift (latest Cretaceous) and shaped much of the lower continental slope morphology from Tertiary time until present. The largest of the mass transport deposits (MTC) is a 500-m (1640-ft)-thick Cretaceous-age unit that spans an area of up to 20,000 km2 (7722 mi2). Seismic facies composing the MTC are (1) chaotic, mounded reflectors; (2) imbricated continuous to discontinuous folded reflector packages interpreted to represent internal syn-depositional thrusts; and (3) isolated, thick packages of continuous reflectors interpreted to represent transported megablocks (3.3 km2 [1.3 mi2]). The latter show well preserved internal stratigraphy. The MTCs originated from an upslope collapse of a narrow shelf during the earliest phases of the Alpine orogeny. Seismic geomorphologic analysis of the non-salt-deformed sections reveal numerous linear features that are interpreted as migrating Mesozoic-age deepmarine sediment waves. Three styles of sediment waves have been identified. These include: (1) type J1—small (less than 17 m thick) and poorly imaged, Jurassic in age, ridges that have wavelengths of up to 12 km and crest-to-crest separations of less than 1 km; (2) type K1—early Aptian constructional sediment waves (~110 m thick) that appear to show some orientation and size variations which suggest an influence on currents by salt-influenced seafloor topography, and (3) type K2—latest Albian and earliest post-Albian sediment waves exhibiting wave heights of 40 m and crest-to-crest separations of 1 km, that are continuous across the entire study area and show evidence of up-slope migration.