<p>The fascinating optical properties of metallic nanostructures, dominated by collective oscillations of free electrons known as plasmons, open new opportunities for the development of devices fabrication based on noble metal nanoparticle composite materials. This thesis demonstrates a low-cost and versatile technique to produce stimuli-responsive ultrafast plasmonic nanostructures with reversible tunable optical properties. Albeit challenging, further control using thermal external stimuli to tune the local environment of gold nanoparticles embedded in VO2 host matrix would be ideal for the design of responsive functional nanocomposites. We prepared Au-VO2 nanocomposite thin films by the inverted cylindrical reactive magnetron sputtering (ICMS) known as hollow cathode magnetron sputtering for the first time and report the reversible tuning of surface plasmon resonance of Au nanoparticles by only adjusting the external temperature stimuli. The structural, morphological, interfacial analysis and optical properties of the optimized nanostructures have been studied. ICMS has been attracting much attention for its enclosed geometry and its ability to deposit on large area, uniform coating of smart nanocomposites at high deposition rate. Before achieving the aforementioned goals, a systematic study and optimization process of VO2 host matrix has been done by studying the influence of deposition parameters on the structural, morphological and optical switching properties of VO2 thin films. A reversible thermal tunability of the optical/dielectric constants of VO2 thin films by spectroscopic ellipsometry has been intensively also studied in order to bring more insights about the shift of the plasmon of gold nanoparticles imbedded in VO2 host matrix.</p>

Quasicrystals is a new kind of material that have several interesting aspects to it. The unusual atomic structure entails many anomalous and unique physical properties, for example, high hardness, and extremely low electrical and thermal conductivity. In thin films quasicrystals would enable new functional materials with a combination of attractive properties.In this work, AlCuFe and Nanoflex steel, materials that are known to form quasicrystals in bulk, have been deposited as thin films on Si and Al2O3 substrates using DC magnetron sputtering. These thin films were heat treated, and the formation and growth of different phases, among other approximant and quasicrystalline phases, were studied using mainly in-situ X-ray diffraction.During the project several problems with the formation of quasicrystals were encountered, and it is proposed how to overcome these problems, or even how to make use of them. Finally, the quasicrystalline phase was realized, although it was not completely pure. In the end some suggestions for future work is presented.

No description available.

This report describes the growth and characterization of thin amorphous samarium-cobalt alloy films. The samarium-cobalt alloy was grown by DC magnetron sputtering in the presence of an external magnetic field parallel to the thin film. The external magnetic field induces a uniaxial in-plane magnetic anisotropy in the samarium-cobalt alloy. The thin films were characterized with x-ray scattering, and the magnetic anisotropy was characterized with the magneto optic Kerr effect. The measurements showed a uniaxial in-plane magnetic anisotropy in the samarium-cobalt alloy films. It is not clear how amorphous the samples really are, but there are indications of crystalline and amorphous areas in the alloys.

In this study, flash memory cells with high-k dielectric HfO2 as tunnel oxide and group IV (Si, Ge) nanocrystals were fabricated and tested. The device structure was grown by magnetron sputtering deposition method and analyzed by various diagnostic techniques such as X-ray Photoelectron Spectroscopy (XPS) and Raman spectroscopy. The use of HfO2 tunnel oxide dielectric with high permittivity constant was one of the main purposes of this study. The ultimate aim was to investigate the use of Si and Ge nanocrystals together with HfO2 tunnel oxide in the memory elements. Interface structure of the fabricated devices was studied by XPS spectroscopy. A depth profile analysis was performed with XPS. Nanocrystal formations were verified using Raman spectroscopy technique. The final part of the study includes electrical characterization of memory devices fabricated using Si and Ge floating gate. C-V (Capacitance Voltage) and G-V (Conductance-Voltage) measurements and charge storage behaviour based on C-V measurements were performed. For comparison, structure of Si and Ge layers either in thin film or in the nanocrystal form were studied. A comparison of the C-V characteristics of these two structures revealed that the memory device with thin films do not confine charge carriers under the gate electrode as should be expected for a continuous film. On the other hand, the device with nanocrystals exhibited better memory behavior as a result of better confinement in the isolated nanocrystals. Trace amount of oxygen was found to be enough to oxidize Ge nanocrystals as confirmed by the Raman measurements. The charge storage capability is weakened in these samples as a result of Ge oxidation. In general, this work has demonstrated that high-k dielectric HfO2 and group IV nanocrystals can be used in the new generation MOS based memory elements. The operation of the memory elements are highly dependent on the material and device structures, which are determined by the process conditions.

<p>Quasicrystals is a new kind of material that have several interesting aspects to it. The unusual atomic structure entails many anomalous and unique physical properties, for example, high hardness, and extremely low electrical and thermal conductivity. In thin films quasicrystals would enable new functional materials with a combination of attractive properties.In this work, AlCuFe and Nanoflex steel, materials that are known to form quasicrystals in bulk, have been deposited as thin films on Si and Al2O3 substrates using DC magnetron sputtering. These thin films were heat treated, and the formation and growth of different phases, among other approximant and quasicrystalline phases, were studied using mainly in-situ X-ray diffraction.During the project several problems with the formation of quasicrystals were encountered, and it is proposed how to overcome these problems, or even how to make use of them. Finally, the quasicrystalline phase was realized, although it was not completely pure. In the end some suggestions for future work is presented.</p>

No description available.

In this thesis research on synthesis, microstructure and properties of carbide-based coatings is reported. These coatings are electrically conducting, and can be tailored for high hardness, low friction and wear, along with load-adaptive behaviour. Tailoring these properties is achieved by controlling the relative phase content of the material. Coatings have been synthesised by dc magnetron sputtering, and their structures have been characterised, mainly by X-ray photoelectron spectroscopy and X-ray diffraction. It has been shown that nanocomposites comprising of a nanocrystalline transition metal carbide (nc-MeCx, Me = Ti, Nb or V) and an amorphous carbon (a-C) matrix can result in low contact resistance in electrical contacts. Such materials also exhibit low friction and high resistance to wear, making them especially suitable for application in sliding contacts. The lowest contact resistance is attained for small amounts of the amorphous carbon phase. It has been shown that specific bonding structures are present in the interface between nc-TiCx and the a-C phases in the nanocomposite.  It was found in particular that Ti3d and C2p states are involved, and that considerable charge transfer occurs across the interface, thereby influencing the structure of the carbide. Further design possibilities were demonstrated for TiCx-based nanocomposites by alloying them with weakly carbide-forming metals, i.e., Me = Ni, Cu or Pt.  Metastable supersaturated solid solution carbides, (T1-xMex)Cy, were identified to result from this alloying process. The destabilisation of the TiCx-phase leads to changes in the phase distribution in the deposited nanocomposites, thus providing further control over the amount of carbon phase formed. Additional design possibilities became available through the decomposition of the metastable (Ti1-xMex)Cy phase through an appropriate choice of annealing conditions, yielding either more carbon phase or a new metallic phase involving Me. This alloying concept was also studied theoretically for all 3d transition metals using DFT techniques. It has also been demonstrated that Ar-ion etching (commonly used in the analysis of carbide based nanocomposites) can seriously influence the result of the analysis, especially for materials containing metastable phases. This implies that more sophisticated methods, or considerable care are needed in making these analyses, and that many of the earlier published results could well be in error.

<p>The fascinating optical properties of metallic nanostructures, dominated by collective oscillations of free electrons known as plasmons, open new opportunities for the development of devices fabrication based on noble metal nanoparticle composite materials. This thesis demonstrates a low-cost and versatile technique to produce stimuli-responsive ultrafast plasmonic nanostructures with reversible tunable optical properties. Albeit challenging, further control using thermal external stimuli to tune the local environment of gold nanoparticles embedded in VO2 host matrix would be ideal for the design of responsive functional nanocomposites. We prepared Au-VO2 nanocomposite thin films by the inverted cylindrical reactive magnetron sputtering (ICMS) known as hollow cathode magnetron sputtering for the first time and report the reversible tuning of surface plasmon resonance of Au nanoparticles by only adjusting the external temperature stimuli. The structural, morphological, interfacial analysis and optical properties of the optimized nanostructures have been studied. ICMS has been attracting much attention for its enclosed geometry and its ability to deposit on large area, uniform coating of smart nanocomposites at high deposition rate. Before achieving the aforementioned goals, a systematic study and optimization process of VO2 host matrix has been done by studying the influence of deposition parameters on the structural, morphological and optical switching properties of VO2 thin films. A reversible thermal tunability of the optical/dielectric constants of VO2 thin films by spectroscopic ellipsometry has been intensively also studied in order to bring more insights about the shift of the plasmon of gold nanoparticles imbedded in VO2 host matrix.</p>

De nombreuses applications modernes nécessitent l’utilisation de matériaux transparents dans le visible et le proche infrarouge. C’est le cas des vitrages pour le bâtiment, des vitres de voitures ou encore d’écrans de téléphone portable. La stratégie mise en place dans ces travaux de thèse est d’obtenir en surface d’un verre sodo-calcique, un matériau barrière aux propriétés similaires à la silice. Deux approches de traitements de surface visent à d’une part, modifier la chimie de surface par un traitement sous champ électrique assisté par voie thermique et d’obtenir une couche riche en SiO2 en surface. D’autre part, un revêtement est déposé sur le verre sodo-calcique, utilisé ici comme substrat. Ce dépôt se fait par pulvérisation cathodique magnétron et permettra de mettre en forme un matériau composite SiO2-TiO2 aux propriétés optiques de transparence et mécaniques de dureté optimisées et d’y associer des propriétés photocatalytiques performantes. / Many applications of the modern wolrd need transparent material especially in the visible range and near-IR. That is the case for windows for building or car, laptop screen. The purpose is to obtain a silica rich layer on the top of a soda-lime glass with similar properties to silica. Two ways have been defined. The first one is thermal poling treatment which consist in a thermal treatment electric field assisted to modify the surface chemistry and monitoring a silica rich layer on the top. The second way is to get a thin film by magnetron sputtering on the top of the soda-lime glass used here as substrate. A SiO2-TiO2 material is got with efficient optical properties of transparencey and mechanical properties (hardness). Photocatalytic activity have been demonstrated and provide self-cleaning properties.