No description available.

No description available.

This thesis is concerned with the design of press tool run-ofts. Run-off is the area on the punch surrounding the panel and its shape is of great importance to the control of metal flow during the draw. The design, although influenced by engineering considerations, is principally a geometric problem, which traditionally has been time-consuming. The overall objective is to reduce the run-oft definition time and hence improve the lead time. Current Austin Rover design procedures are described in Chapter 2 and form the basis of the C.A.D. program outlined in Chapter 3. This specification distils the need for a number of geometric algorithms. In general, obtaining the required continuity between the panel and run-off surface will require some degree of boundary curve approximation. Chapter 4 details four alternative approximation techniques which are compared in Chapter 5; and constitute the main results of the thesis. The salient issues of run-off surface interpolation are considered in Chapter 6.

Thesis (M.S.)--Ohio University, August, 1987. / Title from PDF t.p.

The ability to make rational decisions based on the synthesis of various pieces of information and to eventually arrive at an integrated design plays a very important role in everyday engineering practice. In this paper, a conceptual framework for manufacturing design is obtained through a causal perspective. This framework is used in developing a knowledge-based system that gains insight into the process of arc welding from a few detailed analyses and experiments on simplified models and rationally arrives at an integrated design of the actual process using a hybrid axiomatic-algorithmic approach for design synthesis. The design strategy presented here may also be applied to any manufacturing process in general.

published_or_final_version / abstract / Industrial and Manufacturing Systems Engineering / Doctoral / Doctor of Philosophy

The work detailed in this dissertation relates to thedevelopment of high performance manufacturing systems. Theperformance factor aimed for is especially flexibility, butthere is an intention of making the results adaptable to focuson performance factors of the readers or users choice. Thefocus of the presented research is not only to provide meansfor accomplishing manufacturing that can handle changes butalso to accomplish flexibility in another area. The resultsshould be applicable in many different situations. The researchhas been divided into three parts: the further development of amanufacturing strategy, the development of a base for amanufacturing system design method and the development of amanufacturing control system. The developed strategy is called Assembly-InitiatedProduction (AIP). An implementation of the strategy shouldprovide high manufacturing system flexibility but at the sametime contribute to the lowering of inventory levels andlead-times. Different solutions coupled to technicalrequirements found are also discussed. The design method research focuses on basic manufacturingsystem properties and the possibility of expressing theseproperties by using simple combinable abstract units calledconcepts. The principle is the same as in physics where realworld phenomena may be expressed by using standard concepts asfor example time and mass. The intended use of the results isin an early manufacturing system design phase. The method isnot directly linked to the AIP strategy, but could be used forimplementing it. Production Planning and Control (PPC) is an important partof a manufacturing system. After having reviewed current PPCpractices, a need for a factory floor PPC system workingregardless of factory floor layout, was identified. Based ontheoretical and industrial studies, the suggested solution is acomputerised, decentralised control system, physicallyseparated from the PPC/ERP system. In order to be able to makequick changes in the schedule, to obtain flexibility and toprovide the organisation with a tool for manufacturing controland decision-making, the system works in real time to provideaccurate and valid data.

<p>The work detailed in this dissertation relates to thedevelopment of high performance manufacturing systems. Theperformance factor aimed for is especially flexibility, butthere is an intention of making the results adaptable to focuson performance factors of the readers or users choice. Thefocus of the presented research is not only to provide meansfor accomplishing manufacturing that can handle changes butalso to accomplish flexibility in another area. The resultsshould be applicable in many different situations. The researchhas been divided into three parts: the further development of amanufacturing strategy, the development of a base for amanufacturing system design method and the development of amanufacturing control system.</p><p>The developed strategy is called Assembly-InitiatedProduction (AIP). An implementation of the strategy shouldprovide high manufacturing system flexibility but at the sametime contribute to the lowering of inventory levels andlead-times. Different solutions coupled to technicalrequirements found are also discussed.</p><p>The design method research focuses on basic manufacturingsystem properties and the possibility of expressing theseproperties by using simple combinable abstract units calledconcepts. The principle is the same as in physics where realworld phenomena may be expressed by using standard concepts asfor example time and mass. The intended use of the results isin an early manufacturing system design phase. The method isnot directly linked to the AIP strategy, but could be used forimplementing it.</p><p>Production Planning and Control (PPC) is an important partof a manufacturing system. After having reviewed current PPCpractices, a need for a factory floor PPC system workingregardless of factory floor layout, was identified. Based ontheoretical and industrial studies, the suggested solution is acomputerised, decentralised control system, physicallyseparated from the PPC/ERP system. In order to be able to makequick changes in the schedule, to obtain flexibility and toprovide the organisation with a tool for manufacturing controland decision-making, the system works in real time to provideaccurate and valid data.</p>

This thesis stems from the future scenario that as additive manufacturing (AM) technologies become cheaper and more readily available, consumers without formal design training will begin to customise, design and manufacture their own products. Much of this activity is likely to infringe on brands' intellectual property. The research explores the feasibility of a situation in which, rather than attempting to prohibit such activity, manufacturers engage with consumers to facilitate it, thus retaining control (albeit reduced) over their brand's image and the quality of products offered. The research begins with a literature review encompassing AM technologies and their adoption by consumers; mass customisation (MC) and the management of variation in product offering; and traditional models of industrial design (ID), including user-centred design and co-design. It finds that conventional definitions of MC and ID are unable to provide for the possibility of consumer intervention in the shape and non-modular configuration of products. Further research was then conducted in the areas of Open Design (including crowdsourcing, open sourcing and 'hardware hacking') as well as bespoke customisation, which were found to be much more accommodating of the scenario proposed. A new term, 'consumer design', is introduced and defined, together with the hypothesis that in future, the role of the industrial designer may be to design 'unfinished' products. An original classification of consumer involvement in ID is presented. Empirical research, undertaken with consumers using an iterative design software package (Genoform), demonstrated a preference for designing within pre-determined boundaries. Action research was conducted to assess consumer-oriented 3D CAD software, and compare its capabilities with that of MC toolkits. A survey of senior designers and brand managers revealed strategies for implementing and managing a brand's product design language, and a guide was created to show the relative importance of designed features. Using these findings, a prototype toolkit was created to demonstrate how a brand might facilitate consumer interaction with the shape design of a complex consumer electronics product (in this case a mobile phone). The toolkit was tested with both consumers and experienced designers to assess its viability. The research finds that it is possible to create a consumer-design toolkit which enables untrained users to change the form of a product, whilst maintaining brand equity and ensuring the product's functionality and manufacturability.

No description available.