Blends containing methoxyoligooxyethyleneglycol (MPEGs) (MW 350 and 550) and bis(trifluoromethane)sulfonimide lithium (LiTFSI) salt were prepared by solution blending process using tetrahydrofuran (THF) as a solvent. The ionic conductivity of the blends of different compositions were determined at four temperatures i.e. 25°C, 40°C, 60°C and 70°C. A maximum ionic conductivity value of 3.9x10-3 S cm-1 at 25°C was obtained for the blends containing MPEG-350 at an ethylene oxide to lithium salt ratio of 1:10. The ionic conductivity increases with increasing temperature and shows that the ion transport is aided by the segmental motion of the MPEG chains. 7Li NMR spectroscopy was used to study the nature and dynamics of the salt clusters in the blends

O copolímero SBS é o aditivo mais empregado mundialmente na modificação de ligantes asfálticos, por melhorar diversas de suas características. Um dos principais problemas deste tipo de formulação é a separação de fases, que pode ser minimizada com a incorporação de aditivos. Um novo polietileno de alta densidade e baixo peso molecular oxidado (com denominação comercial TITAN 9686) foi utilizado nesta pesquisa, com o objetivo de testar a hipótese de que a adição de proporções adequadas deste aditivo possa melhorar as características reológicas do asfalto+SBS. O experimento laboratorial foi delineado com base na técnica de experimentos com misturas, englobando um total de nove formulações compostas com asfalto, SBS e TITAN. O teor de SBS variou entre 0 e 5% em peso e o de polietileno variou entre 0 e 2% em peso. Foi utilizado óleo aromático no teor de 4% em peso para todas as nove misturas. As misturas foram analisadas em três condições de envelhecimento: virgem, curto prazo (na estufa RTFO) e longo prazo (na estufa PAV). Foram realizados os seguintes ensaios reológicos: (i) de cisalhamento em regime oscilatório em diferentes condições de temperatura e frequência (para medida do módulo complexo e do ângulo de fase, usados na determinação do grau de desempenho, no cálculo dos parâmetros G*/sen(δ) e G*.sen(δ) e na construção de curvas-mestre), (ii) de viscosidade Brookfield, (iii) de fluência e recuperação sob múltiplas tensões (para medida do percentual de recuperação e da compliância não-recuperável), (iv) de varredura de amplitude linear (para cálculo do parâmetro a f e para ajuste do modelo de fadiga) e (v) de estabilidade à estocagem. Acerca das características escolhidas para mensurar a melhora ou piora das propriedades das misturas asfalto+SBS com a adição de TITAN, podem ser feitas as seguintes observações: (i) a estabilidade à estocagem é melhorada com a adição de TITAN, em particular no teores entre 1 e 2%; (ii) a sensibilidade ao envelhecimento tanto a curto quanto a longo prazos diminui com a adição de TITAN; (iii) a adição de TITAN aumenta a resistência à deformação permanente, à luz dos parâmetros Jnr e R e aumenta a sensibilidade dos ligantes asfálticos modificados com SBS a mudanças bruscas nos níveis de tensão aplicados; e (iv) a adição de TITAN contribui com o aumento da resistência à fadiga, à luz dos parâmetros Nf , a baixos níveis de deformação, e af , e a prejudica reduzindo o parâmetro Nf a altos níveis de deformação e aumentando a temperatura crítica de fadiga ou o parâmetro G*.sen(δ). Tendo por base estas evidências, é possível concluir que a adição de TITAN, em linhas gerais, melhorou a estabilidade dos ligantes asfálticos modificados com até 5,0% de SBS. Com base nas análises realizadas, é possível afirmar que teores da ordem de 1 a 2% de TITAN, para teores de SBS entre 3,0 e 5,0%, são recomendáveis, à luz das propriedades, índices e parâmetros analisados neste trabalho. / The SBS copolymer is the most widely used additive in asphalt binder modification, since it enhances many of the properties of the original material. A critical problem that arises from this type of modification is phase separation, which can be minimized by adding other modifiers to the formulation. A new oxidized, high-density polyethylene with low molecular weight (commercial designation of \"TITAN 9686\") was used in the study with the purpose of verifying the hypothesis that the addition of suitable contents of this modifier can improve the rheological properties of the SBS-modified binder. The laboratory matrix of formulations was based on the experiments with mixtures, and nine types of materials were prepared with asphalt binder, SBS and TITAN. The SBS contents ranged from 0 to 5% by weight, whereas the polyethylene contents ranged from 0 to 2% by weight. These formulations also contained 4% of aromatic oil by weight. Three aging conditions were selected: unaged, short-term aged in the rolling thin-film oven (RTFO) and long-term aged in the pressurized aging vessel (PAV). The following tests were carried out: (i) dynamic oscillatory shear at different temperatures and frequencies of loading for the determination of the complex modulus, the phase angles and the master curves, as well as the performance grades and the numerical values of the parameters G*/sin(δ) and G*.sen(δ); (ii) rotational viscosity; (iii) creep and recovery at multiple stress levels for the determination and the percent recovery and the nonrecoverable compliance; (iv) linear amplitude sweep, in order to calculate the parameter a f and fit the fatigue model to the data; and (v) storage stability. With respect to the characteristics used in the evaluation of the properties of the AC+SBS mixtures after the addition of TITAN, the following observations can be made: (i) storage stability is improved when TITAN is added to the formulation, especially at contents ranging from 1 to 2%; (ii) the sensitivity to the short-term and long-term aging processes decreased with the incorporation of TITAN; (iii) the changes in the R and the Jnr values indicate that the addition of TITAN makes the asphalt binder more resistant to rutting, and also increases the sensitivity of the SBS-modified binders to sudden increases in the stress level; and (iv) the presence of TITAN in the material leads to an increase in the fatigue resistance as based on the parameters Nf and af at low strain levels and the increases in the critical fatigue temperature and the parameter G*.sen(δ). With reference to these evidences, it is possible to conclude that the addition of TITAN generally improves the storage stability of the SBS-modified binders with no more than 5% of copolymer by weight. Based on the results of the present study, it is possible to say that percentages between 1 and 2% of TITAN by weight are recommended for SBS contents between 3 and 5% by weight.

Os amarelos estão associados a fitoplasmas, procariotos pertencentes à classe Mollicutes que não possuem parede celular e habitam o floema de plantas. Os danos causados pelas doenças de etiologia fitoplasmática são relevantes e podem ocorrer em diversas espécies economicamente importantes. Em videira, pesquisas realizadas em várias partes do mundo têm relatado a presença das doenças do tipo “amarelo”, porém, no Brasil, estas doenças ainda não foram relatadas para esta cultura. Em vinhedos comerciais localizados nos Estados de São Paulo e Paraná têm sido observadas plantas com sintomas semelhantes àqueles provocados por fitoplasmas em outros países. Estes sintomas têm sido caracterizados por amarelecimento e ou avermelhamento foliar, necrose do limbo e rachaduras nas nervuras principais. Com o objetivo de detectar e identificar molecularmente fitoplasmas associados a estes tipos de sintomas, folhas e ramos foram amostrados a partir de plantas sintomática e assintomáticas. A detecção foi conduzida com PCR duplo usando-se os iniciadores R16 mF1/mR2 ou P1/P7 na primeira reação e R16 F2n/R2 na segunda reação. A identificação foi realizada através de PCR duplo com iniciadores específicos e análises de RFLP com as enzimas de restrição AluI, RsaI, KpnI, MseI, HhaI, HpaII, HinfI e MboI. Em 23 plantas amostradas, fitoplasmas foram detectados em 10 delas, através da amplificação do 16S rDNA, visualizado em gel de agarose na forma de bandas de 1,2Kb. A identificação por PCR demonstrou que os fitoplasmas associados ao amarelo da videira pertenciam aos grupos 16SrI e 16SrIII. As análises dos perfis eletroforéticos obtidos com o uso da técnica de RFLP revelaram a presença de fitoplasmas afiliados ao subgrupo 16SrI-B. A constatação de fitoplasmas pertencentes a estes dois grupos nas plantas amostradas demonstraram a ocorrência da doença conhecida como amarelo da videira nos Estados de São Paulo e Paraná. As pesquisas desenvolvidas neste trabalho vêm contribuir para aumentar os conhecimentos sobre o papel e a diversidade dos fitoplasmas no agroecossistema brasileiro. / Yellows diseases are associated with phytoplasmas, wall-less prokaryotes, inhabitant of phloem vessels. Damage caused by these diseases are relevant for some important cultivated botanical species. Grapevine yellows diseases have been observed in several areas of the world, but in Brazil the presence of these diseases had not been reported yet. In vineyards located in São Paulo and Paraná States, plants exhibiting symptoms similar those observed in grapevines from other countries have been observed. The symptoms were characterized by yellowing or redding of leaf blade and ribs, leaf blade necrosis and main ribs fissures. In order to detect and identify phytoplasmas associated with those kind of symptoms, leaves and stems were sampled from symptomatic and asymptomatic plants. The phytoplasma detection was conducted with nested PCR using the primer pairs R16mF1/mR2 or P1/P7 for first reaction and 16 F2n/R2 for second reaction. The identification was carried out by nested PCR with group-specifc primer pairs and RFLP analyses with enzymes AluI, RsaI, KpnI, MseI, HhaI, HpaII, HinfI and MboI. From a total of 23 samples analysed, phytoplasmas were detected in 10 of them, through amplification of the 16S rDNA, visualized through a 1.2Kb band in agarose gel. The identification by PCR demonstrated that phytoplasmas associated with grapevine yellow belong to 16SrI and 16SrIII groups. Analyses of electrophoretic profiles revealed the presence of phytoplasmas affiliated to 16SrI-B subgroup. The presence of phytoplasmas belonging to these two groups in the sampled plants demonstrated the occurrence of yellow disease in grapevine in São Paulo and Paraná States. The investigation conducted in the present work contributed to the knowledgement of the role and the diversity of phytoplasmas in Brasilian ecosystem.

Le microenvironnement des cellules tumorales présente plusieurs particularités comme l'hypoxie, l'acidification du milieu extracellulaire et l'hypersécrétion d'enzymes hydrolytiques. Ces hydrolases, comme la cathepsine D et l'héparanase, interviennent dans les étapes de la progression tumorale et notamment l'angiogenèse. Cette thèse s'intègre dans un projet dont la finalité est de concevoir un nano-objet moléculaire enzymo-sensible qui réagirait d'une manière spécifique aux enzymes hypersécrétées dans le microenvironnement tumoral pour assurer de façon simultanée, une fonction de détection et de ciblage des tumeurs. La première partie de nos travaux a été consacrée à la conception et à la validation d'un lien peptidique intégrable dans l'objet moléculaire, sensible aux formes de la cathepsine D actives du microenvironnement tumoral de cancers mammaires. Cet objectif a été réalisé suite à l'étude cinétique de l'hydrolyse de 5 peptides par la cathepsine D mature et la pro-cathepsine D dans les conditions de pH du microenvironnement tumoral. Nous avons également étudié l'effet de l'hypoxie et de l'acidification du milieu extracellulaire sur la sécrétion des formes actives de la cathepsine D par la lignée tumorale de cancer mammaire MCF-7. Dans une deuxième partie, nous avons travaillé sur l'élaboration d'héparines de bas poids moléculaire pouvant assurer la fonction thérapeutique de l'objet moléculaire grâce à leur activité anti-angiogénique. Nous avons mis au point une méthode innovante pour la dépolymérisation de l'héparine qui consiste en une hydrolyse radicalaire par le péroxyde d'hydrogène assistée par les ultrasons. Cette technique permet la production d'oligosaccharides d'héparines caractérisées par des poids moléculaires et des degrés de sulfatation contrôlés. En fonction des conditions de dépolymérisation par cette technique, les héparines de bas poids moléculaires produites peuvent être utilisées comme anticoagulant ou anti-angiogénique. / Tumor microenvironment is characterized by several particularities such as hypoxia, extracellular media acidification and the hyper-secretion of hydrolytic enzymes. These hydrolases, such as cathepsin D and heparanase, are involved in many steps of tumor progression like angiogenesis. This thesis is a part of a project that aims to develop a "smart" molecular nano-object that specifically reacts to hyper-secreted enzymes in the tumor microenvironment for the simultaneous detection and targeting of tumor. The first part of our work concerned the design and the validation of a peptide that is sensitive to active forms of cathepsin D which is a protease, unregulated in many tumors microenvironment such as breast cancers. This objective has been achieved following the kinetic study of the hydrolysis of 5 peptides by mature cathepsin D and procathepsin D in the pH conditions of the tumor microenvironment. On the other hand, we studied the effect of hypoxia and the acidification of the extracellular medium on the secretion of active forms of cathepsin D by the breast cancer cell line MCF-7. In a second part, we worked on the development of low molecular weight heparins that may provide therapeutic function of the molecular object through their anti-angiogenic activity. We have developed an innovative method for the depolymerization of heparin that consists on a radical hydrogen peroxide hydrolysis assisted by ultrasound. This technique allows the production of heparins oligosaccharides characterized by controlled molecular weight and degree of sulfatation. Depending on the depolymerization conditions by this technique, the produced low molecular weight heparins can be used as an anticoagulant or anti-angiogenic.

This work deals with the study of the influence of metallocene type polypropylene (mPP) molecular weight on isothermal crystallization of its nanocomposites filled with hydrophobic and hydrophilic nanosilica (1 and 2 vol.%). Real amount of nanosilica was determined by thermogravimetry. Isothermal crystallization was performed on differential scanning calorimeter (DSC) at 119–125 °C and observed in-situ under optical polarizing microscope (POM) at 128 °C using hot stage. The increase of mPP crystallinity degree in time was determined on DSC and spherulite type and growth rate was determined using POM. Supramolecular surface structure of the original and isothermally crystallited nanocomposites was observed directly or after chemical etching (mixture of mineral acids with KMnO4) on confocal laser scanning microscope. The crystal structure of mPP was in all tested materials verified by X-ray diffraction.

Metallocene based polypropylene (mPP) with very narrow distribution of molecular weight was peroxide-degraded to materials of four different molecular weights including the original mPP labeled MET1–MET3 and MET0, respectively. Double bonds formed after peroxide-degradation was proved on material surfaces by FTIR-ATR (attenuated total reflection of Fourier-transformed infrared spectroscopy). The decreasing molecular weight led to gradual decrease of the tensile strength, tensile modulus as well as the strain and to the decrease of the temperature of thermal decomposition. Confocal laser scanning microscopy (CLSM) of chemically etched surfaces of MET0–MET3 revealed supramolecular structure of commonly occurred structure (radical spherulites) but also supramolecular structure of form (sheaf-like structure). The latter was proved by XRD together with the fact that the content of form decreases with decreasing molecular weight. The mentioned structure differences were not visible on DSC curves because the amount of structure was small and melting temperature, temperature of crystallization and the degree of crystallinity remained the same for all four types of mPP. The structure of the original materials was also characterized after isothermal crystallization performed on differential scanning calorimetry (DSC) and under polarizing optical microscope (POM). The first was performed at 120–126 °C and the latter at 130 °C (Tic). The materials obtained on DSC always contained the structure and its amount increased with increasing Tic whereas higher content of form was always in MET0 with respect to MET3. The structure was proved by XRD and also by DSC heating run followed immediately after the isothermal process. The latter revealed two endotherms belonging to melting of and forms. The presence of form was on the surfaces proved by CLSM. The formation of structure was in-situ observed on POM and the amount of it decreased with decreasing molecular weight. The spherulite growth rate increased with decreasing molecular weight whereas the rate of crystalline portion expressed as half-time of crystallization decreased with decreasing molecular weight.

This master thesis deals with the direct synthesis of polymers from lactic acid. The theoretical part focuses on both natural and synthetic ways of production the lactic acid monomer, their advantages and properties. Furthermore, the theoretical part focuses on the synthesis of poly(lactic acid) (PLA) from lactide, and direct polycondensation from lactic acid discussing about influences of catalysts, co-catalysts as well as chain extenders. The experimental part focuses on the synthesis of PLA polymers and co-polymers wherein investigates suitable catalysts, reaction medium for azeotropic dehydration and co-catalyst influence on products. Thermal and analytical analysis of PLA polymers are mentioned at the end of the experimental part.

We performed an in-depth study of high molecular weight poly[3,6-(dithiophene-2-yl)-2,5-di(2-octyldodecyl)-pyrrolo[3,4-c]pyrrole-1,4-dione-alt-thieno[3,2-b]thiophene] P(DPP2OD-TT) synthesized through the Stille coupling polycondensation in order to understand the correlation between molecular weight, processing conditions and charge transport. We observed a rapid increase in its aggregation in solution with increasing molecular weight which strongly limits the solubility and processability for weight average molecular weights beyond 200 kg mol⁻¹. This results in severe limitation in the charge transport properties of the polymer. We further observe the presence of bulk electronic defects in all different polymer batches that severely limit the current flow and manifest themselves in organic field effect transistors as apparent charge density dependence of the mobility. These defects are passivated by exposure to an ambient atmosphere, as confirmed by an increase in current and mobility that is no more charge density dependent. This is further confirmed by the result of chemical doping using 2,2-(perfluoronaphthalene-2,6-diylidene)dimalononitrile, F₆TCNNQ, which leads to the filling of the trap states and a higher charge density independent mobility of up to 1 cm2 V⁻¹ s⁻¹.

Characterization of cellulose by its molecular weight distribution is afforded after polymeranalogeous dissolution. Additionally, a molecular dispersion of the polymer is a prerequisite. Common processes are dissolution of cellulose in dimethylacetamide-lithiumchloride, nitration and carbanilation. Degradation of the polysaccharide chains can occur in each of the mentioned processes. It is shown that degradation in pyridine occurs via beta-elimination at carbonyl groups along the cellulose chains. Carbanilierung in DMSO is much more pronounced. It comprises oxidation along the Pfitzner-Moffatt-mechanism and subsequent beta-elimination at the thus formed carbonyl-groups. This was elucidated with model systems and by investigation of the carbanilation in different media. Carbonyl groups of cellulose are masked through reaction with phenylisocyanate. This was shown with model. Therefore, the determination of carbonyl groups in cellulose-tricarbanilates is not possible. The separation of low-molecular weight byproducts was optimised. The influence of pretreatment and preactivation of cellulose-samples on the completeness of the conversion was studied. A standard protocol for the carbanilation of cellulose is provided. / Cellulose wird u.a. durch ihre Molmassenverteilung charakterisiert, deren Ermittlung ein polymeranaloges Verfahren zur molekulardispersen Auflösung des Polymers erfordert. Hierfür sind die Direktlösung, die Nitrierung und die Carbanilierung in Gebrauch. Bei allen Prozessen kann es zum Abbau der Polysaccharidketten kommen, wobei diesen Prozessen wenig Beachtung geschenkt wurde. In der Arbeit wird gezeigt, daß der Abbau bei der Carbanilierung in Pyridin durch Beta-Eliminierung an vorhandenen Carbonylgruppen erfolgt. Die Carbanilierung in DMSO fällt stets stärker aus als bei Einsatz von Pyridin und umfasst die Prozesse Oxidation nach dem Pfitzner-Moffatt-Mechanismus und anschließende Beta-Eliminierung an den neu gebildeten Carbonylgruppen. Dies wird durch Untersuchungen an Modellsystemen und am Polymer herausgearbeitet. Carbonylgruppen an Cellulose werden durch die Umsetzung mit Phenylisocyanat maskiert, was an Modellverbindungen gezeigt wurde (Bildung von Endioldicarbanilaten und carbanilierten Halbacetalen). Ihre Bestimmung in Cellulosecarbanilaten ist daher nicht möglich. Die Abtrennung von niedermolekularen Nebenprodukten der Umsetzung wurde optimiert. Der Einfluss der Vorbehandlung und Voraktivierung von Celluloseproben auf die Vollständigkeit der Umsetzung wurde eingehend untersucht. Es wird ein Standardverfahren zur Carbanilierung von Cellulose angegeben.

The transition to a Circular Economy scheme that enables a more efficient usage of the resources is one of the most pressing needs in our society. From the industrial perspective this has been translated into new design philosophies and the search for more efficient systems. Polymeric composites have played a key role in the development of lighter components with good mechanical and tribological properties. Specifically, the demand of Carbon Fiber Reinforced Polymers (CFRP) has had an increasing trend since 1970s-1980s, becoming one of the kind of composites with the highest demand in the market to supply industries such as aerospace, automotive, construction, renewable energies, among others. With the increasing demand of CFRP materials some of the main challenges that arise are their disposal, environmental impact and cost of production to maintain the required supply. The use of Carbon Fibers as a reinforcement for polymeric matrices has been widely documented over the last decades, however the characterization of recycled Carbon Fibers for tribological applications is still scarce. Therefore, this investigation is focused on the mechanical and tribological characterization under water lubricated conditions of Ultra High Molecular Weight Polyethylene (UHMWPE) composites reinforced with virgin and recycled Carbon Fibers and Graphene Oxide. The findings of this work provide an important panorama regarding the performance of recycled Carbon Fibers, showing that they can have a comparable performance in mechanical properties and tribological behavior. This enables the use of recycled Carbon Fibers without compromising performance while reducing the environmental impact and cost.