O objetivo desta tese é o projeto e a síntese de filtros passa-faixa sintonizáveis em frequências de micro-ondas utilizando ressoadores planares tipo patch. As características dos filtros projetados, tais como frequência central, largura de banda e/ou seletividade, são eletronicamente ajustadas por uma tensão de controle DC. Uma metodologia para a concepção e síntese de filtros sintonizáveis patch é desenvolvida e aplicada a dois filtros com topologias triangular e circular. A metodologia fornece técnicas para extrair o esquema de acoplamento que modela o comportamento do filtro e as equações necessárias para calcular a matriz de acoplamento. Então, a resposta teórica do filtro resultante da análise dos coeficientes da matriz de acoplamento é comparada com os resultados das simulações completas. As simulações completas combinam os resultados da simulação eletromagnética 3D do layout do filtro com os resultados da simulação elétrica dos dispositivos de ajuste, representados por seu modelo elétrico equivalente de elementos discretos. Isso permite o correto modelamento das características do ajuste e a definição de seus limites. A fim de validar a metodologia, os filtros patch sintonizáveis são fabricados usando tecnologia de micro-ondas de circuito Integrado (MIC) sobre substratos flexíveis. As dimensões mínimas são maiores do que 0,5 mm, garantindo um processo de fabricação de baixo custo. O primeiro filtro é um filtro patch dual-mode sintonizável que utiliza um ressonador triangular com duas fendas perpendiculares. A frequência central e a largura de banda do filtro podem ser ajustadas individualmente por um controle independente de cada modo fundamental degenerado. O controle dos modos é feito através de diodos varactor montados nas fendas do ressoador patch. O filtro apresenta variação de 20 % de frequência central de 2,9 GHz a 3,5 GHz. A banda relativa de 3 dB varia de 4 % a 12 %. Duas tensões de polarização DC diferentes variando de 2,5 V a 22 V são usadas para ajustar este filtro. O segundo filtro é um filtro patch triple-mode sintonizável que utiliza um ressoador circular com quatro fendas radiais, nas quais são conectados os diodos varactor. A frequência central e a largura de banda deste filtro variam simultaneamente. O filtro apresenta 27 % de variação da frequência central de 1,8 GHz a 2,35 GHz com variação concomitante da largura de banda relativa de 8,5 % para 26 %. Apenas uma única tensão de polarização DC variando de 0,5 V a 20 V é usada para sintonizar este filtro. Ambos os filtros são capazes de lidar com níveis de potência de no mínimo +14,5 dBm (filtro com ressoador triangular) e +12,9 dBm (filtro com ressoador circular). / The objective of this thesis is the design and synthesis of tunable bandpass filters at microwave frequencies using planar patch resonators. The characteristics of the designed filters, such as center frequency, bandwidth, and/or selectivity, are electronically adjusted by a DC voltage control. A methodology for the design and synthesis of tunable patch filters is developed and applied to two filters with triangular and circular topologies. The methodology provides techniques to extract the coupling scheme that models the filter behavior and the necessary equations for calculating the corresponding coupling matrix. Then, the theoretical filter response resulting from the analysis of the coupling matrix coefficients is compared to the results of complete simulations. The complete simulations combine the results of the 3D electromagnetic (EM) simulation of the filter layout with the results of the electrical simulation of the tuning devices, represented by their lumped elements equivalent model. This allows the correct model of the tuning effect and the definition of the tuning possibilities and limits. In order to validate the methodology, the tunable patch filters are fabricated using Microwave Integrated Circuit (MIC) technology on flexible substrates. The minimum dimensions are greater than 0.5 mm, ensuring a low cost fabrication process. The first filter is a tunable dual-mode patch filter using a triangular resonator with two perpendicular slots. The central frequency and the bandwidth of the filter are individually tuned by independently controlling each degenerate fundamental mode. The topology with uncoupled modes allows the control of each resonant mode frequency by varactor diodes mounted across the slots of the patch resonator. This filter presents a center frequency tuning range of 20 %, varying from 2.9 GHz to 3.5 GHz. The FBW 3dB can be varied from 4 % to 12 %. Two different DC bias voltages ranging from 2.5 V to 22 V are used to tune this filter. The second filter is a tunable triple-mode patch filter using a circular resonator with four slots, across which the varactor diodes are connected. The center frequency and bandwidth of this filter vary simultaneously. This filter presents a center frequency tuning range of 27 %, varying from 1.8 GHz to 2.35 GHz, changing concomitantly with the bandwidth from 8.5 % to 26 %. Only a single DC bias voltage ranging from 0.5 V to 20 V is used to tune the filter. Both filters are able to handle power levels as high as +14.5 dBm (triangular patch filter) and +12.9 dBm (circular patch filter).

O objetivo desta tese é o projeto e a síntese de filtros passa-faixa sintonizáveis em frequências de micro-ondas utilizando ressoadores planares tipo patch. As características dos filtros projetados, tais como frequência central, largura de banda e/ou seletividade, são eletronicamente ajustadas por uma tensão de controle DC. Uma metodologia para a concepção e síntese de filtros sintonizáveis patch é desenvolvida e aplicada a dois filtros com topologias triangular e circular. A metodologia fornece técnicas para extrair o esquema de acoplamento que modela o comportamento do filtro e as equações necessárias para calcular a matriz de acoplamento. Então, a resposta teórica do filtro resultante da análise dos coeficientes da matriz de acoplamento é comparada com os resultados das simulações completas. As simulações completas combinam os resultados da simulação eletromagnética 3D do layout do filtro com os resultados da simulação elétrica dos dispositivos de ajuste, representados por seu modelo elétrico equivalente de elementos discretos. Isso permite o correto modelamento das características do ajuste e a definição de seus limites. A fim de validar a metodologia, os filtros patch sintonizáveis são fabricados usando tecnologia de micro-ondas de circuito Integrado (MIC) sobre substratos flexíveis. As dimensões mínimas são maiores do que 0,5 mm, garantindo um processo de fabricação de baixo custo. O primeiro filtro é um filtro patch dual-mode sintonizável que utiliza um ressonador triangular com duas fendas perpendiculares. A frequência central e a largura de banda do filtro podem ser ajustadas individualmente por um controle independente de cada modo fundamental degenerado. O controle dos modos é feito através de diodos varactor montados nas fendas do ressoador patch. O filtro apresenta variação de 20 % de frequência central de 2,9 GHz a 3,5 GHz. A banda relativa de 3 dB varia de 4 % a 12 %. Duas tensões de polarização DC diferentes variando de 2,5 V a 22 V são usadas para ajustar este filtro. O segundo filtro é um filtro patch triple-mode sintonizável que utiliza um ressoador circular com quatro fendas radiais, nas quais são conectados os diodos varactor. A frequência central e a largura de banda deste filtro variam simultaneamente. O filtro apresenta 27 % de variação da frequência central de 1,8 GHz a 2,35 GHz com variação concomitante da largura de banda relativa de 8,5 % para 26 %. Apenas uma única tensão de polarização DC variando de 0,5 V a 20 V é usada para sintonizar este filtro. Ambos os filtros são capazes de lidar com níveis de potência de no mínimo +14,5 dBm (filtro com ressoador triangular) e +12,9 dBm (filtro com ressoador circular). / The objective of this thesis is the design and synthesis of tunable bandpass filters at microwave frequencies using planar patch resonators. The characteristics of the designed filters, such as center frequency, bandwidth, and/or selectivity, are electronically adjusted by a DC voltage control. A methodology for the design and synthesis of tunable patch filters is developed and applied to two filters with triangular and circular topologies. The methodology provides techniques to extract the coupling scheme that models the filter behavior and the necessary equations for calculating the corresponding coupling matrix. Then, the theoretical filter response resulting from the analysis of the coupling matrix coefficients is compared to the results of complete simulations. The complete simulations combine the results of the 3D electromagnetic (EM) simulation of the filter layout with the results of the electrical simulation of the tuning devices, represented by their lumped elements equivalent model. This allows the correct model of the tuning effect and the definition of the tuning possibilities and limits. In order to validate the methodology, the tunable patch filters are fabricated using Microwave Integrated Circuit (MIC) technology on flexible substrates. The minimum dimensions are greater than 0.5 mm, ensuring a low cost fabrication process. The first filter is a tunable dual-mode patch filter using a triangular resonator with two perpendicular slots. The central frequency and the bandwidth of the filter are individually tuned by independently controlling each degenerate fundamental mode. The topology with uncoupled modes allows the control of each resonant mode frequency by varactor diodes mounted across the slots of the patch resonator. This filter presents a center frequency tuning range of 20 %, varying from 2.9 GHz to 3.5 GHz. The FBW 3dB can be varied from 4 % to 12 %. Two different DC bias voltages ranging from 2.5 V to 22 V are used to tune this filter. The second filter is a tunable triple-mode patch filter using a circular resonator with four slots, across which the varactor diodes are connected. The center frequency and bandwidth of this filter vary simultaneously. This filter presents a center frequency tuning range of 27 %, varying from 1.8 GHz to 2.35 GHz, changing concomitantly with the bandwidth from 8.5 % to 26 %. Only a single DC bias voltage ranging from 0.5 V to 20 V is used to tune the filter. Both filters are able to handle power levels as high as +14.5 dBm (triangular patch filter) and +12.9 dBm (circular patch filter).

<p>As the complexity of Very Large Scale Integration (VLSI) circuits dramatically increases by improvements of technology, there is a huge interests to shift different applications from analog to digital domain. While there are many platform available for this shift, Field Programmable Gate Arrays (FPGAs) hold an attractive position because of their performance, power consumption and configurability. Comparing with Application Specific Integrated Circuit (ASIC) and Digital Signal Processor (DSP), FPGA stands in the middle. It is easier to implement a function on FPGA than ASIC which is to perform a fixed operation. Although, DSP can implement versatile functions, its computational power is not high enough to support the high data rate of FPGA.</p><p>This report is the outcome and result of a master thesis at University of Linköping, Sweden. This report tries to cover both theoretical and hardware aspects of implementation of a Farrow structure for sample rate conversion on FPGA.</p><p>The intention of this work was to contribute to what is nowadays the main focus of communication engineers: designing flexible radio systems. Flexible radio systems are interactive and dynamic by definition. That is why a low-cost, flexible multimode terminal is crucially important to support different telecommunication standards and scenarios. In this thesis, FPGA implementation of complete Farrow system is presented. Matlab/Simulink, and VHDL are used in this thesis work as the prime software.</p>

Silicon-on-insulator (SOI) technology has become increasingly attractive because of the strong light confinement, which significantly reduces the footprint of the photonic components, and the possibility of monolithically integrating advanced photonic waveguide circuits with complex electronic circuits, which may reduce the cost of photonic integrated circuits by mass production. This thesis is dedicated to numerical simulation and experimental performance measurement of passive SOI waveguide devices. The thesis consists of two main parts. In the first part, SOI curved waveguide and corner turning mirror are studied. Propagation losses of the SOI waveguide devices are accurately measured using a Fabry-Perot interference method. Our measurements verify that the SOI corner turning mirror structures can not only significantly reduce the footprint size, but also reduce the access loss by replacing the curved sections in any SOI planar lightwave circuit systems. In the second part, an optical 90o hybrid based on 4 × 4 multimode interference (MMI) coupler is studied. Its quadrature phase behavior is verified by both numerical simulations and experimental measurements.

As the complexity of Very Large Scale Integration (VLSI) circuits dramatically increases by improvements of technology, there is a huge interests to shift different applications from analog to digital domain. While there are many platform available for this shift, Field Programmable Gate Arrays (FPGAs) hold an attractive position because of their performance, power consumption and configurability. Comparing with Application Specific Integrated Circuit (ASIC) and Digital Signal Processor (DSP), FPGA stands in the middle. It is easier to implement a function on FPGA than ASIC which is to perform a fixed operation. Although, DSP can implement versatile functions, its computational power is not high enough to support the high data rate of FPGA. This report is the outcome and result of a master thesis at University of Linköping, Sweden. This report tries to cover both theoretical and hardware aspects of implementation of a Farrow structure for sample rate conversion on FPGA. The intention of this work was to contribute to what is nowadays the main focus of communication engineers: designing flexible radio systems. Flexible radio systems are interactive and dynamic by definition. That is why a low-cost, flexible multimode terminal is crucially important to support different telecommunication standards and scenarios. In this thesis, FPGA implementation of complete Farrow system is presented. Matlab/Simulink, and VHDL are used in this thesis work as the prime software.

A fully integrated optical chem/bio sensor complete with integrated source, chemically sensitive waveguide, detector arrays, and associated signal processing electronics on a Si-CMOS chip is a challenging, but highly desirable goal. An evanescent-wave multimode interferometric sensing element is a sensitive method for sensing, which is easily integrated on Si-CMOS. This work is concerned with the design, analysis, and demonstration of a planar multimode interferometric chem/bio sensor that is compatible with the fabrication constraints of Si-CMOS. A 4000-micron-long interferometric that can be adapted for different agents by a particular sensing layer has been fabricated on silicon using silicon dioxide and silicon oxynitride. Hexaflouro-isopropanol substituted polynorbornene is the sensing layer. This sensor has also been fabricated on a Si-CMOS circuit with embedded photodetectors. A sensor on silicon was demonstrated with a minimum detectable index change of 2.0x10-6 using an accurate gas delivery system and a custom hermetic waveguide test chamber. A modal pattern analysis strategy has also been developed to extract the optimal SNR from the measured modal patterns. An understanding of the noise processes and spatial bandwidth effects has enabled an experimentally-based prediction of the index sensitivity of a fully integrated multimode chem/bio sensor on Si-CMOS at 9.2 x10-7. Theoretically, the sensitivity enhancement of high over low index sensing layers and transverse-magnetic over transverse electric modes is described. Also, the sensitivity enhancement of higher-order-transverse modes has been quantified. The wide-angle beam propagation method has been used to simulate the sensor. This simulation showed the relation between the modal pattern repetition period and sensor sensitivity. Further, the modal coupling properties of the multimode y-junction have been described. A second multimode y-junction has been designed to change the modal excitation under the SL, and thus the sensitivity. The chemo-optic response of the `substituted polynorbornene' polymer., hexaflouro-isopropanol substituted polynorbornene to methanol, water, iso-propanol, and benzene has been measured. Also, its thermo-optic response has been measured. Athermal interferometric chem/bio sensors have then been suggested.

Liquid droplet breakup and dynamics is a phenomena of immense practical importance in a wide variety of applications in science and engineering. Albeit, researchers have been studying this problem for over six decades, the fundamental physics governing droplet deformation and fragmentation is still unknown, not to mention the formulation and development of generalized correlations to predict droplet dynamics. The presence of disparate length and time scales, along with the complex unsteady physics, makes this a formidable problem, theoretically, experimentally and computationally. One of the important applications of interest and the motivation for the current research is a liquid fueled propulsion device, such as diesel, gas turbine or rocket engine. Droplet vaporization and ensuing combustion is accelerated if the droplet size is smaller, which makes any process leading to a reduction in drop size of prime importance in the combustion system design. This thesis is an attempt to address several unanswered questions currently confronting the spray community. Unanswered questions include identification and prediction of breakup modes at varying operating conditions, quantitative description of fundamental processes underlying droplet breakup and generalized correlations for child droplet size distributions and drag coefficient associated with the deformation and fragmentation of Newtonian and non-Newtonian fluids. The present work is aimed at answering the above questions by investigating the detailed flowfield and structure dynamics of liquid droplet breakup process and extracting essential physics governing this complex multiphase phenomena. High-fidelity direct numerical simulations are conducted using a volume-of-fluid (VOF) interface capturing methodology. To isolate the hydrodynamic mechanisms dictating droplet breakup phenomena, evaporation and compressibility are neglected, and numerical studies are performed for incompressible fluids at isothermal conditions. For Newtonian fluids, four different mechanisms are identified- oscillatory, bag, multimode and shear breakup modes. Various events during the deformation and fragmentation process are quantitatively identified and correlations are developed to predict the breakup mechanisms and droplet size distributions for a broad range of operating conditions. It was found that for We > 300 and Oh < 0.1 for rho_l/rho_g = 8.29, the child droplet size distributions can be modeled by a log-normal distribution. A correlation to predict the sauter mean diameter, d32, is also developed, given by d32 / D = 8We^-0.72 / Cd. Temporal evolution of momentum balance and droplet structure are also used to calculate the drag coefficient at each time step from first principles. Results show that the drag coefficient first increases to a maximum as the droplet frontal area increases and then decreases at the initiation of breakup. The drag coefficient reaches a steady value at the end of droplet lifetime, corresponding to the momentum retained by the droplet. A correlation to predict the time-mean drag coefficient given by, Cd / Cd,0 = 2We-^0.175, is developed, which indicates that the time averaged drag coefficient decreases with Weber number. The motivation to study non-Newtonian liquid droplet breakup stems from the various advantages gelled propellants offer as compared to traditional liquid or solid propellants in combustion systems, particularly in rocket engines. It was found that the breakup behavior of pseudoplastic, non-Newtonian liquids is drastically different as compared to Newtonian droplets. Several flow features commonly exhibited by non-Newtonian fluids are observed during the breakup process. The breakup initiates with the formation of beads-in-a-string due to the non-Newtonian nature of the fluid under consideration. This is followed by rapid rotation of the droplet with the appearance of helical instability and liquid budges, which forms the sites for primary and satellite droplet shedding. Child droplet size distribution are also examined and it is found that a Gaussian curve universally characterizes the droplets produced during non-Newtonian droplet breakup process. To put all things in perspective, the objectives of the thesis were two folds: (1) elucidate breakup physics for Newtonian and non-Newtonian liquid droplet deformation and breakup, and (2) develop correlations which can be used in an Eulerian-Lagrangian framework to study large-scale engineering problems. It is hoped that this research contributed to droplet breakup and dynamics literature by providing a more thorough and quantitative understanding of the breakup phenomena of liquid droplets and furnished models which can be used in future research endeavors.

This dissertation aims to investigate systems in which several optical and mechanical degrees of freedom are coupled through optomechanical interactions. Multimode optomechanics creates the prospect of integrated functional devices and it allows us to explore new types of optomechanical interactions which account for collective dynamics and optically mediated mechanical interactions. Owing to the development of fabrication techniques for micro- and nano-sized mechanical elements, macroscopic mechanical oscillators can be cooled to the deep quantum regime via optomechanical interaction. Based on the possibility to control the motion of mechanical oscillators at the quantum level, we design several schemes involving mechanical systems of macroscopic length and mass scales and we explore the nonlinear dynamics of mechanical oscillators. The first scheme includes a quantum cantilever coupled to a classical tuning fork via magnetic dipole-dipole interaction and also coupled to a single optical field mode via optomechanical interaction. We investigate the generation of nonclassical squeezed states in the quantum cantilever and their detection by transferring them to the optical field. The second scheme involves a quantum membrane coupled to two optical modes via optomechanical interaction. We explore dynamic stabilization of an unstable position of a quantum mechanical oscillator via modulation of the optical fields. We then develop a general formalism to fully describe cavity mediated mechanical interactions. We explore a rather general configuration in which multiple mechanical oscillators interact with a single cavity field mode. We specifically consider the situation in which the cavity dissipation is the dominant source of damping so that the cavity field follows the dynamics of the mechanical modes. In particular, we study two limiting regimes with specific applications: the weak-coupling regime and single-photon strong-coupling regime. In the weak-coupling regime, we build a protocol for quantum state transfer between mechanical modes. In the single-photon coupling regime, we investigate the nonlinear nature of the mechanical system which generates bistability and bifurcation in the classical analysis and we also explore how these features manifest themselves in interference, entanglement, and correlation in the quantum theory.

Pour répondre à l'accroissement de la demande en bande passante, de nouveaux réseaux optiques sont mis en place. Ce déploiement s'accompagne de la mise en service de nouveaux standards de fibres optiques, ce qui pose la question de l'utilisation et de la mise en valeur du réseau fibré existant, et notamment des fibres multimodes déjà installées, rapidement vouées à l'obsolescence. On cherche ainsi à mettre à profit la diversité spatiale que procure la nature multimode des ces fibres, via une analogie avec le domaine radiofréquences. L'utilisation des techniques MIMO, largement répandue dans le contexte de transmission radiofréquences, peut constituer une solution à cette amélioration nécessaire de la capacité de transmission de ces fibres optiques multimodes. Ce travail de thèse s'intéresse donc à l'étude et à la transposition des techniques MIMO dans le cadre de transmissions sur fibre optique et aux enjeux et défis associés. La transmission de signaux OFDM via un schéma de transmission SIMO optique permet de démontrer l'intérêt de la transposition des techniques MIMO à l'optique et la faisabilité de tels dispositifs.

The Multimode Interference (MMI) mechanism is a powerful toool used in the analysis and design of a certain class of optical, microwave and millimeter wave devices. The principles of the MMI method and the self-imaging principle is described. Using this method, NXM MMI couplers, MMI splitter/combiners are analyzed. Computer simulations for illustrating the &quot / Multimode Interference Mechanism&quot / are carried out. The MMI approach is used to analyze overmoded &#039 / rectangular metallic&#039 / and &#039 / dielectric slab&#039 / type of waveguides and devices. The application of the MMI technique is investigated experimentally by using a metallic waveguide structure operating in the X-band. The construction of the related structure and the related experimental work are reported.