For wireless communication systems, due to broadcasting nature of wireless medium, how to keep eavesdroppers from wiretapping messages is worth investigated. In addition to encryption techniques applied in application layer, physical layer secrecy techniques have been studied in literature. Under the premise that eavesdropper cannot steal any information, physical layer secrecy focus on maximizing the capacity of legal transmission, and make it more reliable by using physical properties of wireless channel. This thesis considers an amplify-and-forward (AF) multiple-input multiple-output (MIMO) cooperative communication network with an untrusted relay (UR), and linear precoders are employed at source, relay, and destination. The relay here serves as a bridge of transmission 1 between the source and the destination. However, assume that the untrusted relay may wiretap information from the source without authorization. In order to prevent relay from wiretapping information, the destination generates artificial noise (AN) to interfere the relay, when the relay is receiving information from the source. Since AN is generated by the destination, the destination can eliminate AN by itself after receiving signal from the relay without corrupting signals of legal transmission. We propose precoder design for source, relay and destination to maximize secrecy capacity under the power constraint of three nodes. By utilizing singular value decomposition (SVD) of all channel matrices and Hadamard inequality, we simplify the optimization problem of precoding matrices to scalar optimization problem, and optimization can be accomplished recursively.

Design and analysis of random-like codes for various multiple-input and multiple-output communication systems are addressed in this work. Random-like codes have drawn significant interest because they offer capacity-achieving performance. We first consider the analysis and design of low-density parity-check (LDPC) codes for turbo multiuser detection in multipath CDMA channels. We develop techniques for computing the probability density function (pdf) of the extrinsic messages at the output of the soft-input soft-output (SISO) multiuser detectors as a function of the pdf of input extrinsic messages, user spreading codes, channel impulse responses, and signal-to-noise ratios. Using these techniques, we are able to accurately compute the thresholds for LDPC codes and design good irregular LDPC codes. We then apply the tools of density evolution with mixture Gaussian approximations to optimize irregular LDPC codes and to compute minimum operational signal-to-noise ratios for ergodic MIMO OFDM channels. In particular, the optimization is done for various MIMO OFDM system configurations which include different number of antennas, different channel models and different demodulation schemes. We also study the coding-spreading tradeoff in LDPC coded CDMA systems employing multiuser joint decoding. We solve the coding-spreading optimization based on the extrinsic information SNR evolution curves for the SISO multiuser detectors and the SISO LDPC decoders. Both single-cell and multi-cell scenarios will be considered. For each of these cases, we will characterize the extrinsic information for both finite-size systems and the so-called large systems where asymptotic performance results must be evoked. Finally, we consider the design optimization of irregular repeat accumulate (IRA) codes for MIMO communication systems employing iterative receivers. We present the density evolution-based procedure with Gaussian approximation for optimizing the IRA code ensemble. We adopt an approximation method based on linear programming to design an IRA code with the extrinsic information transfer (EXIT) chart matched to that of the soft MIMO demodulator.

The scarce and overpopulated radio spectrum is going to present a major barrier to the growth and development of future wireless networks. As such, spectrum sharing seems to be inevitable to accommodate the exploding demand for high data rate applications. A major challenge to realizing the potential advantages of spectrum sharing is interference management. This thesis deals with interference management techniques in noncooperative networks. In specific, interference alignment is used as a powerful technique for interference management. We use the degrees of freedom (DoF) as the figure of merit to evaluate the performance improvement due to the interference management schemes. This dissertation is organized in two parts. In the first part, we consider the K-user multiple input multiple output (MIMO) Gaussian interference channel (IC) with M antennas at each transmitter and N antennas at each receiver. This channel models the interaction between K transmitter-receiver pairs sharing the same spectrum for data communication. It is assumed that the channel coefficients are constant and are available at all nodes prior to data transmission. A new cooperative upper-bound on the DoF of this channel is developed which outperforms the known bounds. Also, a new achievable transmission scheme is provided based on the idea of interference alignment. It is shown that the achievable DoF meets the upper-bound when the number of users is greater than a certain threshold, and thus it reveals the channel DoF. In the second part, we consider communication over MIMO interference and X channels in a fast fading environment. It is assumed that the transmitters obtain the channel state information (CSI) after a finite delay which is greater than the coherence time of the channel. In other words, the CSI at the transmitters becomes outdated prior to being exploited for the current transmission. New transmission schemes are proposed which exploit the knowledge of the past CSI at the transmitters to retrospectively align interference in the subsequent channel uses. The proposed transmission schemes offer DoF gain compared to having no CSI at transmitters. The achievable DoF results are the best known results for these channels. Simple cooperative upper-bounds are developed to prove the tightness of our achievable results for some network configurations.

Research in wireless communications has been actively carried out in recent years. In order to enable a high data transmission rate, multiple-input multiple-output (MIMO) communications has been proposed and commonly adopted. Accurate channel identification and reliable data detection are major challenges in the implementation of a communications system operating over a wireless fading channel. These issues become even more challenging in MIMO systems since there are many more parameters involved in the estimation processes. This thesis, consisting of four major parts, focuses on applying convex optimization to solve design problems in both MIMO channel estimation and data detection. The first part proposes a novel orthogonal affine precoding technique for jointly optimal channel estimation and symbol detection in a general MIMO frequency-selective fading channel. Additionally, the optimal power allocation between the data and training signals is also analytically derived. The proposed technique is shown to perform much better than other affine precoding techniques in terms of detection error probability and computational complexity. The second part is concerned with the MIMO orthogonal frequency-division multiplexing (OFDM) systems. The superimposed training technique developed in the first part is applied and extended for MIMO-OFDM systems where all the involved transmitters and receivers are assumed to be uncorrelated. Analytical and numerical results confirm that the proposed design can efficiently identify the unknown wireless channel as well as effectively recover the data symbols, while conserving the transmission bandwidth. The third part considers training and precoding designs for OFDM under colored noise environment. The superiority of the proposed design over the previously-known design under colored noise is thoroughly demonstrated. The last part of the thesis develops the orthogonal affine precoder for spatially correlated MIMO-OFDM systems. The optimal superimposed training sequences are solved by tractable semi-definite programming. To have a better computational efficiency, two approximate design techniques are also presented. Furthermore, the non-redundancy precoder proposed in the third part is employed to combat channel correlation. As a result, the proposed designs are demonstrated to outperform other known designs in terms of channel estimation and data detection.

Visible light communication (VLC) is an emerging form of optical wireless communication that transmits data by modulating light in the visible spectrum. To meet the growing demand for wireless communication capacity from mobile devices, we investigate multiple-input multiple-output (MIMO) VLC to achieve multiplexing capacity gains and to allow multiple users to simultaneously transmit without disrupting each other. Previous approaches to receive VLC signals have either been unable to simultaneously receive multiple independent signals from multiple transmitters, unable to adapt to moving transmitters and receivers, or unable to sample the received signals fast enough for high-speed VLC. In this dissertation, we develop and evaluate two novel approaches to receive high-speed MIMO VLC signals from mobile transmitters that can be practically scaled to support additional transmitters. The first approach, Token-Based Pixel Selection (TBPS) exploits the redundancy and sparsity of high-resolution transmitter images in imaging VLC receivers to greatly increase the rate at which complementary metal-oxide semiconductor (CMOS) active pixel sensor (APS) image sensors can sample VLC signals though improved signal routing to enable such high-resolution image sensors to capture high-speed VLC signals. We further model the CMOS APS pixel as a linear shift-invariant system, investigate how it scales to support additional transmitters and higher resolutions, and investigate how noise can affect its performance. The second approach, a spatial light modulator (SLM)-based VLC receiver, uses an SLM to dynamically control the resulting wireless channel matrix to enable relatively few photodetectors to reliably receive from multiple transmitters despite their movements. As part of our analysis, we develop a MIMO VLC channel capacity model that accounts for the non-negativity and peak-power constraints of VLC systems to evaluate the performance of the SLM VLC receiver and to facilitate the optimization of the channel matrix through the SLM.

Researchers have shown that by combining multiple input multiple output (MIMO) techniques with CDMA then higher gains in capacity, reliability and data transmission speed can be attained. But a major drawback of MIMO-CDMA systems is multiple access interference (MAI) which can reduce the capacity and increase the bit error rate (BER), so statistical analysis of MAI becomes a very important factor in the performance analysis of these systems. In this thesis, a detailed analysis of MAI is performed for binary phase-shift keying (BPSK) signals with random signature sequence in Raleigh fading environment and closed from expressions for the probability density function of MAI and MAI with noise are derived. Further, probability of error is derived for the maximum Likelihood receiver. These derivations are verified through simulations and are found to reinforce the theoretical results. Since the performance of MIMO suffers significantly from MAI and inter-symbol interference (ISI), equalization is needed to mitigate these effects. It is well known from the theory of constrained optimization that the learning speed of any adaptive filtering algorithm can be increased by adding a constraint to it, as in the case of the normalized least mean squared (NLMS) algorithm. Thus, in this work both linear and non-linear decision feedback (DFE) equalizers for MIMO systems with least mean square (LMS) based constrained stochastic gradient algorithm have been designed. More specifically, an LMS algorithm has been developed , which was equipped with the knowledge of number of users, spreading sequence (SS) length, additive noise variance as well as MAI with noise (new constraint) and is named MIMO-CDMA MAI with noise constrained (MNCLMS) algorithm. Convergence and tracking analysis of the proposed algorithm are carried out in the scenario of interference and noise limited systems, and simulation results are presented to compare the performance of MIMO-CDMA MNCLMS algorithm with other adaptive algorithms.

<p> A multiple-input multiple-output (MIMO) communication system has the potential to provide reliable transmissions at high data rates. However, the computational cost of achieving this promising performance can be quite substantial. With an emphasis on practical implementations, the MIMO systems employing the low cost linear receivers are studied in this thesis. The optimum space-time block codes (STBC) that enable a linear receiver to achieve its best possible performance are proposed for various MIMO systems. These codes satisfy an intra and inter orthogonality property, and are called unitary trace-orthogonal codes. In addition, several novel transmission schemes are specially designed for linear receivers with the use of the proposed code structure. The applications of the unitary trace-orthogonal code are not restricted to systems employing linear receivers. The proposed code structure can be also applied to the systems employing other types of receivers where several originally intractable code design problems are successfully solved.</p> <p>The communication schemes presented in this thesis are outlined as follows: •For a MIMO system with N ≥ M, where M and N are the number of transmitter and receiver antennas, respectively, the optimal full rate linear STBC for linear receivers is proposed and named unitary trace-orthogonal code. The proposed code structure is proved to be necessary and sufficient to achieve the minimum detection error probability for the system. • When applied to a multiple input single output (MISO) communication system, a special linear unitary trace-orthogonal code, named the Toeplitz STBC, is proposed. The code enables a linear receiver to provide full diversity and to achieve the optimal tradeoff between the detection error and the data transmission rate. This is, thus far, the first code that possesses such properties for an arbitrary MISO system that employs a linear receiver. • In MIMO systems in which N ≥ M and the signals are transmitted at full symbol rate, the highest diversity gain achievable by linear receivers is analyzed and shown to be N - M + 1. To improve the performance of a linear receiver, a multi-block transmission scheme is proposed, in which signals are coded so that they span multiple independent channel realizations. An optimal full rate linear STBC for this system that minimizes the detection error probability is presented. The code is named multi-block unitary trace-orthogonal code. The resulting system has an improved diversity gain. Furthermore, by relaxing the code from the full symbol rate constraint, a special multi-block transmission scheme is proposed. This scheme achieves a much improved diversity gain than those with full symbol rate. • The unitary trace-orthogonal code can also be applied to a system that employs a maximum-likelihood (ML) receiver rather than the simple linear receiver. For such a system, a systematic design of full diversity unitary trace-orthogonal code is presented for an arbitrary data transmission rate. </p> <p>In summary, when a simple linear receiver is employed, unitary trace-orthogonal codes and their optimality properties are exploited for various multiple antenna communication systems. Some members from this code family can also enable an optimal performance of ML detection. </P> / Thesis / Doctor of Philosophy (PhD)

Yes / A four-element compact dual-band patch antenna having a common ground plane operating at 28/38 GHz is proposed for millimeter-wave communication systems in this paper. The multiple-input-multiple-output (MIMO) antenna geometry consists of a slotted ellipse enclosed within a hollow circle which is orthogonally rotated with a connected partial ground at the back. The overall size of the four elements MIMO antenna is 2.24λ × 2.24λ (at 27.12 GHz). The prototype of four-element MIMO resonator is designed and printed using Rogers RT Duroid 5880 with εr = 2.2 and loss tangent = 0.0009 and having a thickness of 0.8 mm. It covers dual-band having a fractional bandwidth of 15.7% (27.12–31.34 GHz) and 4.2% (37.21–38.81 GHz) for millimeter-wave applications with a gain of more than 4 dBi at both bands. The proposed antenna analysis in terms of MIMO diversity parameters (Envelope Correlation Coefficient (ECC) and Diversity Gain (DG)) is also carried out. The experimental result in terms of reflection coefficient, radiation pattern, gain and MIMO diversity parameter correlates very well with the simulated ones that show the potential of the proposed design for MIMO applications at millimeter-wave frequencies. / This work is supported by the Moore4Medical Project, funded within ECSEL JU in collaboration with the EU H2020 Framework Programme (H2020/2014-2020) under Grant Agreement H2020-ECSEL-2019-IA-876190, and Fundação para a Ciência e Tecnologia (ECSEL/0006/2019). This work is also funded by the FCT/MEC through national funds and when applicable co-financed by the ERDF, under the PT2020 Partnership Agreement under the UID/EEA/50008/2020 Project.

ITC/USA 2008 Conference Proceedings / The Forty-Fourth Annual International Telemetering Conference and Technical Exhibition / October 27-30, 2008 / Town and Country Resort & Convention Center, San Diego, California / Although multiple-input multiple-output (MIMO) systems have become increasingly popular, the existence of real time results to compare with those predicted by theory is still surprisingly limited. In this work the hardware description of a MIMO wireless communication system using orthogonal space time block codes (OSTBC) is discussed for two antennas at both the transmitter and receiver. A numerical example for a frequency flat time correlated channel is given to show the impact of channel estimation.

Due to the rapid development of wireless communications together with the inflexibility of the current spectrum allocation policy, radio spectrum becomes more and more exhausted. One of the critical challenges of wireless communication systems is to efficiently utilize the limited frequency resources to be able to support the growing demand of high data rate wireless services. As a promising solution, cognitive radios have been suggested to deal with the scarcity and under-utilization of radio spectrum. The basic idea behind cognitive radios is to allow unlicensed users, also called secondary users (SUs), to access the licensed spectrum of primary users (PUs) which improves spectrum utilization. In order to not degrade the performance of the primary networks, SUs have to deploy interference control, interference mitigating, or interference avoidance techniques to minimize the interference incurred at the PUs. Cognitive radio networks (CRNs) have stimulated a variety of studies on improving spectrum utilization. In this context, this thesis has two main objectives. Firstly, it investigates the performance of single hop CRNs with spectrum sharing and opportunistic spectrum access. Secondly, the thesis analyzes the performance improvements of two hop cognitive radio networks when incorporating advanced radio transmission techniques. The thesis is divided into three parts consisting of an introduction part and two research parts based on peer-reviewed publications. Fundamental background on radio propagation channels, cognitive radios, and advanced radio transmission techniques are discussed in the introduction. In the first research part, the performance of single hop CRNs is analyzed. Specifically, underlay spectrum access using M/G/1/K queueing approaches is presented in Part I-A while dynamic spectrum access with prioritized traffics is studied in Part I-B. In the second research part, the performance benefits of integrating advanced radio transmission techniques into cognitive cooperative radio networks (CCRNs) are investigated. In particular, opportunistic spectrum access for amplify-and-forward CCRNs is presented in Part II-A where collaborative spectrum sensing is deployed among the SUs to enhance the accuracy of spectrum sensing. In Part II-B, the effect of channel estimation error and feedback delay on the outage probability and symbol error rate (SER) of multiple-input multiple-output CCRNs is investigated. In Part II-C, adaptive modulation and coding is employed for decode-and-forward CCRNs to improve the spectrum efficiency and to avoid buffer overflow at the relay. Finally, a hybrid interweave-underlay spectrum access scheme for a CCRN is proposed in Part II-D. In this work, the dynamic spectrum access of the PUs and SUs is modeled as a Markov chain which then is utilized to evaluate the outage probability, SER, and outage capacity of the CCRN.