The objective of this research is to develop a new class of miniaturized sensors on-catheter technology through the integration of functional nanomaterials and flexible microsystems, with high sensitivity, fast recovery time, reduced form factor, for in situ blood pressure and flow monitoring with minimal invasiveness. Real-time endovascular pressure measurement techniques are crucial to evaluate the hemodynamics, which indicates the physiological state of the cardiovascular system. Current technology relies on fluid filled catheter coupled to remote transducers to measure endovascular pressures and gradients. The fluid filled catheters are bulky, inherently inaccurate due to the tubing mechanical resonance, and with low signal integrity due to the vibration noises from the environment. Silicon based conventional pressure sensors have complications due to issues of catheter stiffness, biocompatibility or small form factor integration. We propose a paradigm shift in designing the endovascular pressure sensing technology, through developing compact flexible sensing structures using nanoengineered piezoelectric polymers which can be integrated on catheters without consuming the internal lumen space. We focused on designing novel nanostructures using PVDF-TrFE (Polyvinyledene fluoride trifluoroethylene), with well controlled [Beta]-crystalline phase to significantly improve the resulting sensor performance. The research objectives include: (1) Thin-film structures for higher piezoelectric effect without any mechanical stretching or poling requirements, (2) High density highly-aligned electrospun nanofibers through electrospinning towards enhanced sensitivity; (3) Core-shell electrospun nanofiber for tapping the near [Beta]-crystalline phase formation and high cyrstallinity by virtue of inherent stress and stretching involved in the fabrication procedure. For pressure sensor design and characterization, we worked on two main form factors designs: thin-film, and aligned electrospun nanofiber based sensors patterned on catheter tips which are ready to be deployed in intra-vascular environment. Testing results showed promising results from PVDF based pressure sensors. The average sensitivity of the PVDF sensors was found to be four times higher than commercial pressure sensor while the PVDF sensor had five fold shorter response time than commercial pressure sensor, making the PVDF sensors highly suitable for real-time pressure measurements using catheters. / text

Carbon nanotubes (CNTs) have extraordinary electrical and mechanical properties, and many potential applications have been proposed, ranging from nanoscale devices to reinforcement of macroscopic structures. However, due to their small sizes, characterization of their mechanical properties and deformation behaviours are major challenges. Theoretical modelling of deformation behaviours has shown that multi-walled carbon nanotubes (MWCNTs) can develop ripples in the walls on the contracted side when bent above a critical curvature. The rippling is reversible and accompanied by a reduction in the bending stiffness of the tubes. This behaviour will have implications for future nanoelectromechanical systems (NEMS). Although rippling has been thoroughly modelled there has been a lack of experimental data thus far. In this study, force measurements have been performed on individual MWCNTs and vertically aligned carbon nanofibers (VACNFs). This was accomplished by using a custom-made atomic force microscope (AFM) inside a scanning electron microscope (SEM). The measurements were done by bending free-standing MWCNTs/VACNFs with the AFM sensor in a cantilever-to-cantilever fashion, providing force-displacement curves. From such curves and the MWCNT/VACNF dimensions, measured from SEM-images, the critical strain for the very onset of rippling and the Young’s modulus, E, could be obtained. To enable accurate estimations of the nanotube diameter, we have developed a model of the SEM-image formation, such that intrinsic diameters can be retrieved. We have found an increase in the critical strain for smaller diameter tubes, a behaviour that compares well with previous theoretical modelling. VACNFs behaved very differently, as they did not display any rippling and had low bending stiffnesses due to inter-wall shear. We believe that our findings will have implications for the design of future NEMS devices that employ MWCNTs and VACNFs. / <p>Artikel 2 Image formation mechanisms tidigare som manuskript, nu publicerad: urn:nbn:se:kau:diva-16425 (MÅ 150924)</p>

Cardiovascular disease is the leading cause of death in the United States with approximately 49% of the cardiovascular related deaths attributed to coronary heart disease (CHD). CHD is the accumulation of plaque resulting in the narrowing of the vessel lumen and a decrease in blood flow to the downstream heart muscle. In order to restore blood flow, arterial by-pass procedures can be undertaken. However, the patient's own arteries/veins may not be suitable for use as a vessel replacement, and synthetic grafts lack the compliancy and durability needed for these small diameter locations (<5 mm). Therefore, the goal of this research is to develop a nanofibrous material that can be used in vascular applications such as this. In this study, we fabricate coaxial electrospun nanofibers with gelatin in the shell and polyvinyl alcohol (PVA) in the core using 1 Gelatin: 1 PVA and 3 Gelatin: 1 PVA mass ratios. Gelatin, derived from collagen, is highly bioactive while PVA, a synthetic polymer, has appealing mechanical properties. Therefore, by combining these materials in a core-shell structure, we hypothesize that the resulting nanofibers will have enhanced mechanical properties, cellular growth and migration, as well as minimal platelet deposition and activation compared to scaffolds composed solely of gelatin or PVA. First, the coaxial scaffolds exhibited an enhanced Young's modulus and ultimate strength compared to scaffolds composed of PVA or gelatin alone. Endothelial cells had high proliferation and migration on the coaxial electrospun scaffolds with higher migration seen on the stiffer, coaxial scaffolds. The smooth muscle cells had less proliferation and lower migration rates on the coaxial scaffolds than the endothelial cells. Using a modified prothrombinase assay, the coaxial scaffolds had minimal platelet activation. Lastly, when pre-seeding the coaxial scaffolds with endothelial cells or smooth muscle cells, the platelet deposition decreased in comparison to platelet deposition with no cell pre-seeding. Overall, the 1 Gel: 1 PVA coaxial scaffolds promoted endothelial cell growth and migration, minimized smooth muscle cell growth and migration, and had minimal platelet activation. Therefore, the 1 Gel: 1 PVA coaxial nanofibers are an intriguing material for use in vascular applications.

In 2007 the production of expanded polystyrene (EPS) in the world was over 4 million tonnes and is expected to grow at 6 percent per year. With the increased concern about environmental protection, alternative biodegradable materials from renewable resources are of interest. The present doctoral thesis work successfully demonstrates that starch-based foams with mechanical properties similar to EPS can be obtained by reinforcing the cell-walls in the foams with cellulose nanofibers (MFC). High cellulose nanofiber content nanocomposites with a highly plasticized (50/50) glycerol-amylopectin starch matrix are successfully prepared by solvent-casting due to the high compatibility between starch and MFC. At 70 wt% MFC, the nanocomposites show a remarkable combination of high tensile strength, modulus and strain to failure, and consequently very high work to fracture. The interesting combination of properties are due to good dispersion of nanofibers, the MFC network, nanofiber and matrix properties and favorable nanofiber-matrix interaction. The moisture sorption kinetics (30% RH) in glycerol plasticized and pure amylopectin film reinforced with cellulose nanofibers must be modeled using a moisture concentration-dependent diffusivity in most cases. The presence of cellulose nanofibers has a strong reducing effect on the moisture diffusivity. The decrease in zero-concentration diffusivity with increasing nanofiber content could be due to geometrical impedance, strong starch-MFC molecular interaction and constrained swelling due to the cellulose nanofiber network present. Novel biomimetic starch-based nanocomposite foams with MFC contents up to 40 wt% are successfully prepared by freeze-drying. The hierarchically structured nanocomposite foams show significant increase in mechanical properties in compression compared to neat starch foam. Still, better control of the cell structure could further improve the mechanical properties. The effect of cell wall composition, freeze-drying temperature and freezing temperature on the resulting cell structure are therefore investigated. The freeze-drying temperature is critical in order to avoid cell structure collapse. By changing the starch content, the cell size, anisotropy ratio and ratio between open and closed cells can be altered. A decrease in freezing temperature decreases the cell size and increases the anisotropy ratio. Finally, mechanical properties obtained in compression for a 30 wt% MFC foam prepared by freeze-drying demonstrates comparable properties (Young's modulus and yield strength) to expanded polystyrene at 50% RH and similar relative density. This is due to the reinforcing cellulose nanofiber network within the cell walls. / QC 20100913

Thesis (Ph. D.)--Ohio State University, 2007. / Title from first page of PDF file. Includes bibliographical references (p. 208-232).

Ce travail a pour but de mettre au point des nouvelles méthodes pour la recherche avancée sur les cellules souches et les cellules cancéreuses. Nous avons d'abord développé une méthode de patch pour la culture et la différentiation des cellules souches pluripotentes induites humain (hiPSCs) "hors sol". Ce patch de culture est constitué des monocouches de nanofibres réticulées de gélatine sur un support en nid d'abeilles pour assurer un minimum de contact de matériel exogène et un maximum de perméabilité. Puis, nous avons démontré la formation des tissues cardiaques et des neurones moteurs sur le patch, partis de colonies des hiPSCs en forme d'embryoïdes et de monocouches respectivement. Nous avons également développé un dispositif microfluidique avec filtre intégré pour isoler les cellules tumorales circulantes (CTCs), montrant une haute performance de capture en termes d'efficacité, de sélectivité et de viabilité cellulaire. Enfin, nous avons évalué l'effet de drogue anticancéreuse à la formation des sphéroïdes tumoraux en utilisant des multi-puits d'agarose micro-fabriqués. Tous ensembles, nous avons progressé dans la micro-ingénierie vers des applications à grande échelle. / This work aimed to provide new tools and methods that can be used for advanced studies of stem cells and cancer cells. We first developed a patch method for off-ground culture and differentiation of human induced pluripotent stem cells (hiPSCs). The culture patch we proposed consists of crosslinked monolayer gelatin nanofibers on a honeycomb frame to ensure minimal exogenous material contact and maximum permeability. Then, we demonstrated the formation of cardiac tissue constructs and motor neurons on the patch, started from embryoid-body like and monolayer hiPSC colonies, respectively. We also developed a microfluidic device with integrated filter for isolation of circulating tumor cells (CTCs), showing high capture performances in terms of efficiency, selectivity and cell viability. Finally, we evaluated the anti-cancer drug effect on the formation of tumor spheroids by using microfabricated agarose multi-wells. All together, we progressed in micro-engineering toward large scale applications.

Les méta-matériaux offrent la possibilité d'obtenir des propriétés physiques nettement améliorées en comparaison avec celles des matériaux naturels. Dans ce travail, nous explorons une nouvelle variété de métamatériaux thermoélectriques à base de micro-et nano-structuration du silicium, sous la forme de super-réseaux verticaux, avec comme visée applicative la récupération d'énergie thermique ainsi que le refroidissement. En outre, nous focalisons nos efforts sur une méthodologie expérimentale permettant la réalisation de ces matériaux par des moyens simples et peu coûteux. La première partie de cette thèse sert d'introduction aux phénomènes thermiques qui constituent la base de la conduction électrique et de la dissipation de chaleur dans les nanostructures, respectivement par émission thermo-ionique et par la diffusion de phonons. Cette partie détaille également les principes et résultats de caractérisation thermique à l'aide des méthodes 3ω et 2ω. La deuxième partie de cette thèse décrit les approches de micro- nanostructuration descendante « top-down » et ascendante « bottom-up », en vue de la fabrication de super-réseaux nanométriques sur du silicium mono-cristallin. La nouvelle architecture verticale proposée soulève des défis technologiques qui sont traités à travers l'exploration de techniques expérimentales originales pour produire, d'une manière efficace et sur de grandes surfaces, des structures submicroniques à fort facteur de forme. Ces techniques comprennent l'utilisation de motifs résultant de lithographie traditionnelle combinée à l'extrusion pour en produire des structures volumiques. En outre, l'utilisation de nanofibres et de diblocs copolymères comme nano-motifs géométriques sont également présentés pour nous rapprocher davantage de l'objectif ultime du projet / Metamaterials offer the benefit of obtaining improved physical properties over natural materials. In this work, we explore a new variety of thermoelectric metamaterials based on silicon micro- and nano- structuration, in the form of vertical superlattices for use in energy-related applications. Additionally, we focus on a route towards fabricating these materials using simple and low-cost means compared to prior attempts. The first part of this thesis serves as an introduction to the thermal phenomena which form the basis for electrical conduction and heat dissipation by thermionic emission and phonon scattering at the nanoscale. These principles forms the crux of the device. This section also details the characterization principles and results using the 3ω and 2ω methods for thermal measurement. The second part of this thesis describes both top-down and bottom-up approaches towards fabricating nanoscale superlattices from single-crystalline silicon. The novel proposed vertical architecture raised technological challenges that were tackled through the exploration of original experimental techniques for producing high aspect ratio (HAR) structures in an effective manner and over large surface areas. These techniques include the use of traditional lithography patterning and subsequent extrusion of volumic structures. Additionally, the use of nanofibers and diblock copolymers as templates for further etching of HAR silicon nanostructures are also presented to bring us closer to the ultimate goal of the project

Ce travail a pour but de développer des nouveaux substrats d’étude en culture cellulaire. Nous avons d'abord fabriqué des réseaux de micro-piliers en élastomère et en polymères thermoplastiques. En particulier, nous avons réalisé des réseaux de micro-piliers adjacents et de différentes hauteurs, qui dépend de la rigidité de la surface de culture. Nos résultats ont montré que les cellules étaient sensibles à la hauteur des piliers lorsque la rigidité effective du substrat était similaire à celle de la cellule et que les cellules se déplacent préférentiellement vers la partie plus rigide. Nous avons également développé une méthode pour fabriquer des nanofibres sur les piliers élastomère pour créer un substrat qui reproduit la matrice extracellulaire in vivo. Nos résultats ont montré que les neurones primaires de l'hippocampe sur un tel substrat étaient plus actifs que sur des substrats plats. En outre, nous avons analysé le confinement et la déformation des noyaux cellulaires dans les espaces inter-piliers pour les études de cellules tumorales et de cellules souches. Enfin, nous avons intégré les réseaux de micro-piliers dans un dispositif microfluidique afin de montrer que la migration cellulaire soumise à un gradient de concentration était influencée par la rigidité du substrat. En conclusion, les micropiliers ainsi fabriqués peuvent être utilisés pour réguler la rigidité d’un substrat afin d’étudier divers mécanismes en culture cellulaire. / This work aimed to provide new substrates for cell culture studies. We first developed a method to fabricate micropillars in both elastomer and thermoplastic polymer. In particular, we produced adjacent micropillar arrays with different heights to evaluate the surface stiffness dependent migration of cells. Our results showed that cells were sensitive to the height of the pillars when the effective stiffness of the substrate is compatible to that of the cell and that the cells were preferentially localized on the stiffer surface area. We also developed a method to fabricate nanofibers on the elastomer pillars to create in-vivo like extracellular matrix. Our results showed that primary hippocampal neurons on such a substrate were more active than on flat substrates. Furthermore, we analyzed the confinement and deformation of cell nuclei in the inter-pillar areas for both cancer and stem cell studies. Finally, we integrated the micro-pillar arrays into a microfluidic device and showed that the cell migration under concentration gradient was influenced by the substrate stiffness. Altogether, the fabricated pillar arrays can be used to regulate the stiffness of the substrate for cell culture studies.

abstract: In this work, a novel method is developed for making nano- and micro- fibrous hydrogels capable of preventing the rejection of implanted materials. This is achieved by either (1) mimicking the native cellular environment, to exert fine control over the cellular response or (2) acting as a protective barrier, to camouflage the foreign nature of a material and evade recognition by the immune system. Comprehensive characterization and in vitro studies described here provide a foundation for developing substrates for use in clinical applications. Hydrogel dextran and poly(acrylic acid) (PAA) fibers are formed via electrospinning, in sizes ranging from nanometers to microns in diameter. While "as-electrospun" fibers are continuous in length, sonication is used to fragment fibers into short fiber "bristles" and generate nano- and micro- fibrous surface coatings over a wide range of topographies. Dex-PAA fibrous surfaces are chemically modified, and then optimized and characterized for non-fouling and ECM-mimetic properties. The non-fouling nature of fibers is verified, and cell culture studies show differential responses dependent upon chemical, topographical and mechanical properties. Dex-PAA fibers are advantageously unique in that (1) a fine degree of control is possible over three significant parameters critical for modifying cellular response: topography, chemistry and mechanical properties, over a range emulating that of native cellular environments, (2) the innate nature of the material is non-fouling, providing an inert background for adding back specific bioactive functionality, and (3) the fibers can be applied as a surface coating or comprise the scaffold itself. This is the first reported work of dex-PAA hydrogel fibers formed via electrospinning and thermal cross-linking, and unique to this method, no toxic solvents or cross-linking agents are needed to create hydrogels or for surface attachment. This is also the first reported work of using sonication to fragment electrospun hydrogel fibers, and in which surface coatings were made via simple electrostatic interaction and dehydration. These versatile features enable fibrous surface coatings to be applied to virtually any material. Results of this research broadly impact the design of biomaterials which contact cells in the body by directing the consequent cell-material interaction. / Dissertation/Thesis / Ph.D. Bioengineering 2011

The thesis explored the use of different sorbent materials in solid phase extraction method development. The methods included the use of the polymeric Agilent Bond Elut Plexa solid phase extraction and electrospun polymer-silica composite sorbents for clean-up and preconcentration. Sample clean-up for alkaloids (hydrastine and berberine) in goldenseal, Hydrastis canadensis and flavonoids (quercetin, kaempferol and isorhamnetin) in Ginkgo biloba was achieved using Bond Elut Plexa SPE sorbent. Clean-up of flavonoids in Ginkgo biloba was also achieved using electrospun polymer-silica composite (polystyrene-silica, polyacrylonitrile-silica and nylon 6-silica) sorbents. All analysis of flavonoids and alkaloids was carried out using an Agilent 1200 Series HPLC coupled with a diode array detector. Good peak separation was achieved in less than 6 min employing an Agilent ZORBAX Eclipse Plus C18 column (4.6 x 75 mm, 3.5 μm) at 35⁰C. The mobile phases employed were 0.1% phosphoric acid/methanol gradient and 0.5% phosphoric acid/methanol (40:60) for alkaloids and flavonoids respectively. The calibration curves exhibited linearity up to 120 μg mL⁻¹ with correlation coefficients of more than 0.9980. The recoveries ranged from 73-109% with relative standard deviation of less than 5% for all analytes. Agilent Chem Elut supported liquid extraction was employed for the development of a sample preparation method for the determination of 24 banned aromatic amines from azo dyes in textile following the EU standard method EN 14362-1:2003 (E) and the Chinese standard method GB/T 17592-2006. The supported liquid extraction was effective in the extraction of the aromatic amines from textile (cotton, wool and polyester/cotton [80%:20%]). Most of the recoveries obtained were conforming to the minimum requirements set in the EN 14362-1:2003 (E) standard method and the relative standard deviations were less than 15%. Good peak separation was obtained within 70 min run time using the Agilent Zorbax SB-Phenyl column (4.6 mm x 250 mm, 5-micron) or the Agilent DB-35 MS (J & W) (30 m x 0.25 mm, 0.25 μm film thickness. It was demonstrated that the polymeric Agilent Bond Elut Plexa, electrospun nanofibers and diatomaceous earth were effective in extraction of alkaloids, flavonoids and aromatic amines in different matrices. The developed methods were simple, rapid and reproducible.