1 |
Effects of release cutting and soil scarification on natural regeneration in Pinus sylvestris shelterwoods /Karlsson, Christer, January 1900 (has links) (PDF)
Diss. (sammanfattning) Alnarp : Sveriges lantbruksuniv. / Härtill 4 uppsatser.
|
2 |
The floatability of coal and other inherently hydrophobic solids in relation to the surface tension of aqueous methanol solutionsHornsby, David Theodore Burt January 1981 (has links)
The relative floatability of coal and other inherently hydrophobic solids in aqueous solutions of short-chain n-alcohols was studied. An analysis of wettability data from the literature for such systems indicated that, in general, a linear relationship existed between the solution surface tension, Y1v» and the adhesion tension, Y1v COS Ɵ (where Ɵ is the contact angle). Except for very non-polar solids, the critical surface tension of wetting, Yc (Ɵ= 0° intercept), determined with the alcohol solutions, was relatively constant and independent of the type of solid. The parameter which reflected the relative wettability of a solid was the slope of its Y1v cos Ɵ vs. Y1v line.
Since wettability and floatability are not necessarily synonymous, a concept of critical surface tension of floatability, Ycf, was developed to characterize the threshold floatability condition where successful bubble-particle attachment was controlled by either adhesion or aggregate stability. In both cases it was concluded that Ycf would depend on the surface and the physical properties of a particle for a given set of flotation conditions, and that Ycf > Yc . Under certain circumstances it also appeared that selective flotation separation between particles of two inherently hydrophobic solids, A and B, would be feasible in an aqueous alcohol solution if Ycf A <
Y1v ≤ Ycf B even when the two solids had the same Yc value.
Small-scale flotation tests in aqueous methanol solutions were performed on narrow size fractions of several inherently hydrophobic solids. In most cases the wt.% floated decreased from a maximum to a minimum over a discrete range of Y1v, implying that the particles in a sample had a range of Ycf
values. The relative floatability of a sample was given by the position of
its Ycf band along the Y1v axis. For the same size fraction, floatability
decreased in the order: polytetrafluoroethylene (PTFE), sulphur, medium volatile bituminous coal, molybdenite. Almost complete selective separation by flotation was achieved between samples whose Ycf bands did not overlap.
Because coal is a very heterogeneous material, it was expected that a sample of fine coal particles would display a wide range of wettability and floatability characteristics, with a corresponding broad range of Ycf values. This was verified in aqueous methanol solutions for narrow particle size fractions of several high rank coal samples from the East Kootenay coalfield, British Columbia. Incremental ash content/floatability relationships were developed which could be roughly divided into two main regions'. In one, the coal particle ash content was low and independent of floatability, while in the other they were inversely related. The effects of physical and compositional factors other than ash content on the distribution of floatability within a coal sample have been discussed.
For a readily floatable coal sample the yield-ash content relationships for the flotation products were independent of the flotation time and conditioning time, and were considered to approximate the ideal flotation wash-ability characteristics of the sample. Flotation washability was found to be linearly related to feed ash content.
The shape and position of the incremental ash content/floatability curves for different coal samples allowed the relative wettabilities of their organic matter to be assessed in terms of degree of oxidation, rank and petro-graphic composition. Coal sample floatability in aqueous methanol solutions was found to be sensitive to small differences in surface properties which were not reflected by bulk compositional parameters. / Applied Science, Faculty of / Materials Engineering, Department of / Graduate
|
3 |
Elementary Pre-service Science Teacher Preparation: Contributions During the Methods SemesterTravers, Karen Ann January 2008 (has links)
The purpose of this study was to better understand the nature of the contribution of the mentor teacher and the methods instructor in the development of professional knowledge of pre-service teachers (PSTs) to teach elementary science. The PSTs' conceptions of teaching science were also explored to see if there were changes in their ideas about teaching science and what influenced these changes during the methods semester of a field-based elementary teacher preparation program. Specifically, this study examined the perceptions of the PSTs regarding the nature of mentorship that they received for the teaching of elementary science. Participants were 144 PSTs from five field-based elementary methods sites, their mentor teachers, and their methods instructor from a university program in a large urban area. Of interest in this study was examining the extent to which PSTs actually observed science teaching in their mentor teachers' classrooms during the methods semester. Analysis of an end-of-semester survey revealed that more than one-third of the PSTs never observed their mentor elementary teachers teach science. On an encouraging note, 62% of PSTs who observed at least some science teaching reported that they perceived their teachers as modeling inquiry science teaching strategies. Regarding the perceived quality of mentor support for learning to teach science, more than 90% of PSTs reported that they felt supported by mentor teachers in their growth of science teaching even if the mentor teachers did not incorporate science lessons into their school day. In addition, half of the PSTs' conceptions of teaching science changed over the methods semester, with the methods course and the elementary classroom as the two most influential factors.
|
4 |
A comparison of the amount of heat generated during instrumentation of extracted teeth and during instrumentation of teeth in vivo a thesis submitted in partial fulfillment ... dentistry for children /Panzer, Milton. January 1951 (has links)
Thesis (M.S.)--University of Michigan, 1951.
|
5 |
Thermal changes in children's teeth due to the technics used during cavity preparation a thesis submitted in partial fulfillment ... dentistry for children /Konikow, Zalman. January 1952 (has links)
Thesis (M.S.)--University of Michigan, 1952.
|
6 |
A comparative study of the relative merits of the box and slice types of cavity preparations a thesis submitted in partial fulfillment ... /Hendrick, Robert M. January 1900 (has links)
Thesis (M.S.)--University of Michigan, 1938.
|
7 |
A study of impermeable areas in the walls of cavitites prepared in the treatment of dental caries submitted in partial fulfillment of the requirements ... operative dentistry ... /Myers, George Elliott, January 1952 (has links)
Thesis (M.S.)--University of Michigan, 1952.
|
8 |
Sterically hindered organic complexes of the heavier group 14 elementsJolly, B. S. January 1987 (has links)
No description available.
|
9 |
Cloud stability and pectinesterase in mango squashMahgoub, S. A. January 1981 (has links)
No description available.
|
10 |
Preparartion and characterisation of reaction sintered aluminium titanateThomas, H. A. J. January 1988 (has links)
No description available.
|
Page generated in 0.0271 seconds