Spelling suggestions: "subject:"aphysical attributes"" "subject:"2physical attributes""
21 |
Análise micromorfológica e relação com atributos de um solo sob diferentes usos e manejos /Gonçalves, Fernanda Coelho, 1983- January 2011 (has links)
Orientador: Maria Helena Moraes / Banca: Kátia Luciene Maltoni / Banca: José Eduardo Corá / Banca: Sandro Roberto Brancalião / Banca: Maria de Fátima Guimarães / Resumo: As modificações antrópicas, causadas por atividades como cultivo e tráfego de máquinas, afetam diretamente a estrutura do solo, causando diminuição da estabilidade de agregados, aumento da densidade, alterações na porosidade e menor disponibilidade de água e aeração e, conseqüentemente, diminuição do desenvolvimento normal das plantas. A observação da morfologia do solo possibilita visualização da estrutura e do espaço poroso do solo em sua forma natural, tornando a micromorfologia e a análise de imagens ferramentas importantes na interpretação dos efeitos do manejo. O trabalho teve por objetivo avaliar o efeito dos sistemas de uso e manejo sobre os atributos de um Nitossolo Vermelho distroférrico, com auxílio da micromorfologia do solo. O delineamento experimental foi o inteiramente casualizado, com quatro repetições, com os seguintes tratamentos empregados por 19 anos consecutivos: arado de discos com atuação até a profundidade de 0,20 a 0,25 m + duas gradagens niveladoras, grade pesada com atuação até a profundidade de 0,15 a 0,18 m + duas gradagens niveladoras, semeadura direta, pousio com vegetação espontânea e mata. Foram determinados os seguintes atributos: curva de retenção de água, infiltração de água no solo, matéria orgânica, fracionamento químico da matéria orgânica, densidade do solo, porosidade, resistência do solo à penetração, argila dispersa em água, distribuição de agregados por tamanho e diâmetro médio ponderado. Além disso, foi realizada a análise de imagens dos blocos, para a determinação da macroporosidade, e a análise de âminas delgadas para o estudo da porosidade e estrutura do solo. As amostras indeformadas e deformadas foram coletadas nas camadas de 0,0-0,10 m e 0,10-0,20 m. A análise micromorfológica... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: The anthropogenic changes caused by activities such as farming and machinery traffic directly affect soil structure, causing a decrease in aggregate stability, increased in soil bulk density, changes in porosity, permeability, lower availability of water and aeration and, consequently, the decrease in the normal development of plants. The observation of soil in its natural form provides better visualization of the structure and behavior of the soil pore space, making the micromorphology and image analysis tools important in interpreting effects of management. This study had as objective to evaluate the effect of the use and management systems on the attributes of a dystroferric Red Nitosol, with the aid of soil micromorphology. The experiment was analysed as a completely randomized design with four replications, and the following treatments employed for 19 consecutive years: disc plow acting to a depth from 0.20 to 0.25 m + two soft harrowings, heavy disc harrow acting to a depth from 0.15 to 0.18 m + two soft harrowings, no tillage, fallow with natural vegetation and forest. The following soil attributes were determined: water retention curve, water infiltration, organic matter, quantification of the humic fractions, bulk density, porosity, resistance to penetration, dispersed clay, distribution of aggregates by size classes and mean weight diameter. The block image analysis were performed to determine the macroporosity, and the analysis of thin sections to study the porosity and soil structure. The undisturbed and disturbed samples were collected in two layers, between 0.0 to 0.10 m and 0.10-0.20 m. The soil micromorphological and micromorfometric analysis allows to characterize the effect of soil use and management... (Complete abstract click electronic access below) / Doutor
|
22 |
Variabilidade espacial de atributos físicos e hídricos do solo e da produtividade da cultura da soja em uma área comercialScherpinski, Clementina 05 August 2005 (has links)
Made available in DSpace on 2017-07-10T19:25:05Z (GMT). No. of bitstreams: 1
Clementina Scherpinski.pdf: 2317997 bytes, checksum: 6fb30fbe757979a6729f5d4bcb2a8a22 (MD5)
Previous issue date: 2005-08-05 / Studies that involve the physical attributes and hydrics of the soil are important
for the development of the maintainable agriculture. When the areas of
cultivated lands are used with intense agricultural production, the soil presents
alterations in their physical attributes and hydrics. The economical viability of
the agricultural production depends of these attributes and it requests more
detailed studies about the space variability of the soils. Among the attributes
hydrics stands out the Hydraulic Conductivity that is characterized by the
easiness with that the water is driven through the soil and it is important for a
good development of the agriculture. Nowadays, the Hydraulic Conductivity of
the soil is one of the main parameters used for studies that involve the flow of
water in the soil. This work has for objective to study the space variability of the
physical attributes (bulk density, micro porosity, macro porosity, total porosity)
and attributes hydrics (hydraulic conductivity, infiltration of the water in the soil
of the soil) and of the productivity of the soy, with focus in Agriculture of
Precision. It was looked for to understand the behavior of the attributes of the
physical space, linked to the agricultural production of the soy in a commercial
area in the West of Paraná. For the analyses of the attributes in study
variograms and graph h-scatterplot were used for the verification of the
structure of space dependence and construction of thematic maps through the
ordinary kriging. For the verification of the space correlation of the physical
attributes and hydrics studied with the productivity of the soy crossed
variograms were built. In general all of the attributes presented space
dependence except for the attribute Density of the Soil in the depth (0 - 10 cm).
It was found space correlation between the Productivity of the Soy and the
Density of the Soil in the two studied depths and also between the Productivity
and the attributes Microporosidade (0 - 10 cm), Macroporosidade (10 - 20 cm)
and Total Porosity of the Soil (10 - 20 cm). Therefore, it was considered
appropriated the use of geostatistic for this study. / Estudos que envolvam os atributos físicos e hídricos do solo são de suma
importância para o desenvolvimento da agricultura sustentável. Quando as
áreas de terras cultivadas são utilizadas com intensa produção agrícola, o solo
apresenta alterações em seus atributos físicos e hídricos. A viabilidade
econômica da produção agrícola depende desses atributos e requer estudos
detalhados sobre a variabilidade espacial dos solos. Dentre os atributos
hídricos destaca-se a Condutividade Hidráulica que se caracteriza pela
facilidade com que a água é conduzida através do solo e é de fundamental
importância para um bom desenvolvimento da agricultura. Atualmente, a
Condutividade Hidráulica do solo é um dos principais parâmetros utilizados
para estudos que envolvam o fluxo de água no solo. Este trabalho tem por
objetivo estudar a variabilidade espacial dos atributos físicos (densidade do
solo, microporosidade, macroporosidade, porosidade total) e atributos hídricos
(condutividade hidráulica, infiltração da água no solo) e da produtividade da
soja, com enfoque em Agricultura de Precisão. Buscou-se entender o
comportamento dos atributos do espaço físico, ligados à produção agrícola da
soja em uma área comercial na região Oeste do Paraná. Para as análises dos
atributos em estudo foram utilizados semivariogramas e envelopes para a
verificação da estrutura de dependência espacial e construção de mapas
temáticos através da krigagem ordinária. Para a verificação da correlação
espacial dos atributos físicos e hídricos estudados com a produtividade da soja
foram construídos semivariogramas cruzados. De modo geral todos os
atributos apresentaram dependência espacial com exceção do atributo
Densidade do Solo na profundidade (0 10 cm). Foi encontrada correlação
espacial entre a Produtividade da Soja e a Densidade do solo nas duas
profundidades estudadas e também entre a Produtividade e os atributos
Microporosidade (0 10 cm), Macroporosidade (10 20 cm) e Porosidade
Total do Solo (10 20 cm). Considerou-se o uso da geoestatistica adequado
para este estudo.
|
23 |
Variabilidade espacial de atributos físicos e hídricos do solo e da produtividade da cultura da soja em uma área comercialScherpinski, Clementina 05 August 2005 (has links)
Made available in DSpace on 2017-05-12T14:48:27Z (GMT). No. of bitstreams: 1
Clementina Scherpinski.pdf: 2317997 bytes, checksum: 6fb30fbe757979a6729f5d4bcb2a8a22 (MD5)
Previous issue date: 2005-08-05 / Studies that involve the physical attributes and hydrics of the soil are important
for the development of the maintainable agriculture. When the areas of
cultivated lands are used with intense agricultural production, the soil presents
alterations in their physical attributes and hydrics. The economical viability of
the agricultural production depends of these attributes and it requests more
detailed studies about the space variability of the soils. Among the attributes
hydrics stands out the Hydraulic Conductivity that is characterized by the
easiness with that the water is driven through the soil and it is important for a
good development of the agriculture. Nowadays, the Hydraulic Conductivity of
the soil is one of the main parameters used for studies that involve the flow of
water in the soil. This work has for objective to study the space variability of the
physical attributes (bulk density, micro porosity, macro porosity, total porosity)
and attributes hydrics (hydraulic conductivity, infiltration of the water in the soil
of the soil) and of the productivity of the soy, with focus in Agriculture of
Precision. It was looked for to understand the behavior of the attributes of the
physical space, linked to the agricultural production of the soy in a commercial
area in the West of Paraná. For the analyses of the attributes in study
variograms and graph h-scatterplot were used for the verification of the
structure of space dependence and construction of thematic maps through the
ordinary kriging. For the verification of the space correlation of the physical
attributes and hydrics studied with the productivity of the soy crossed
variograms were built. In general all of the attributes presented space
dependence except for the attribute Density of the Soil in the depth (0 - 10 cm).
It was found space correlation between the Productivity of the Soy and the
Density of the Soil in the two studied depths and also between the Productivity
and the attributes Microporosidade (0 - 10 cm), Macroporosidade (10 - 20 cm)
and Total Porosity of the Soil (10 - 20 cm). Therefore, it was considered
appropriated the use of geostatistic for this study. / Estudos que envolvam os atributos físicos e hídricos do solo são de suma
importância para o desenvolvimento da agricultura sustentável. Quando as
áreas de terras cultivadas são utilizadas com intensa produção agrícola, o solo
apresenta alterações em seus atributos físicos e hídricos. A viabilidade
econômica da produção agrícola depende desses atributos e requer estudos
detalhados sobre a variabilidade espacial dos solos. Dentre os atributos
hídricos destaca-se a Condutividade Hidráulica que se caracteriza pela
facilidade com que a água é conduzida através do solo e é de fundamental
importância para um bom desenvolvimento da agricultura. Atualmente, a
Condutividade Hidráulica do solo é um dos principais parâmetros utilizados
para estudos que envolvam o fluxo de água no solo. Este trabalho tem por
objetivo estudar a variabilidade espacial dos atributos físicos (densidade do
solo, microporosidade, macroporosidade, porosidade total) e atributos hídricos
(condutividade hidráulica, infiltração da água no solo) e da produtividade da
soja, com enfoque em Agricultura de Precisão. Buscou-se entender o
comportamento dos atributos do espaço físico, ligados à produção agrícola da
soja em uma área comercial na região Oeste do Paraná. Para as análises dos
atributos em estudo foram utilizados semivariogramas e envelopes para a
verificação da estrutura de dependência espacial e construção de mapas
temáticos através da krigagem ordinária. Para a verificação da correlação
espacial dos atributos físicos e hídricos estudados com a produtividade da soja
foram construídos semivariogramas cruzados. De modo geral todos os
atributos apresentaram dependência espacial com exceção do atributo
Densidade do Solo na profundidade (0 10 cm). Foi encontrada correlação
espacial entre a Produtividade da Soja e a Densidade do solo nas duas
profundidades estudadas e também entre a Produtividade e os atributos
Microporosidade (0 10 cm), Macroporosidade (10 20 cm) e Porosidade
Total do Solo (10 20 cm). Considerou-se o uso da geoestatistica adequado
para este estudo.
|
24 |
Relação solo-relevo em áreas sob cultivo de café no sudoeste de Minas GeraisSanchez, Maria Gabriela Baracat [UNESP] 22 October 2009 (has links) (PDF)
Made available in DSpace on 2014-06-11T19:28:32Z (GMT). No. of bitstreams: 0
Previous issue date: 2009-10-22Bitstream added on 2014-06-13T19:16:33Z : No. of bitstreams: 1
sanchez_mgb_me_jabo.pdf: 1221506 bytes, checksum: a068146637a79bdff63a05b39d8b62bd (MD5) / Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) / Os atributos físicos, químicos e de produção apresentam dependência espacial, e a distribuição dos mesmos é dependente do relevo. O mapeamento da distribuição espacial dos atributos físicos, químicos e de produtividade permite identificar zonas de manejo específico da cultura do café. O objetivo deste trabalho foi avaliar a variabilidade espacial dos atributos físicos, identificando e mapeando zona de manejo específico, para predizer a produtividade do café, com base nos atributos físicos e químicos do solo. O solo da área de estudo foi classificado como Latossolo Vermelho-Amarelo. A área produziu, exclusivamente, café nos últimos 18 anos e, atualmente, está plantada a variedade Coffea arabica (Catuaí), com espaçamento de 4,0 x 0,75 m. Na área escolhida, com representatividade fisiográfica regional, estabeleceu-se uma malha, com intervalos regulares de 50 m, perfazendo um total de 145 pontos nos 31,7 hectares. Em cada ponto do cruzamento desta malha, foram retiradas amostras de solo, nas profundidades de 0,0 - 0,20 m e 0,20 – 0,40 m, para a avaliação dos atributos físicos, granulométricos e químicos do solo. Uma unidade amostral composta por nove plantas foi construída em cada ponto amostral para a coleta dos atributos qualitativos e quantitativos do rendimento da cultura (produção, porcentagens de grãos nas peneiras 16; 17; 18 e do tipo de bebida). A área de estudo foi intensamente amostrada para a avaliação da espessura do solun, realizando tradagens profundas por meio das quais se estabeleceu o limite de 1,6 m para presença de cascalho, o que permitiu a divisão da área em dois compartimentos. Efetuou-se a análise estatística, geoestatística e multivariada para a análise dos dados. Todos os atributos físicos estudados, nas duas profundidades, apresentaram dependência espacial. Pequenas variações nas formas do relevo condicionaram variabilidade... / The physical, chemical and production attributes present spatial dependence and the distribution of the same ones is dependent of the relief. The mapping of the spatial distribution of the physical, chemical and productivity helps to identify areas of specific management of the coffee crop. The objective of this study work was to evaluate the space variability of the physical attributes identifying and mapping area of specific handing to predict the productivity of the coffee with base in the physical and chemical attributes of the soil. The soil of the study area was classified as Oxisol. The area produces exclusively coffee in the last 18 years, and is currently planted the variety Coffea Arabic (Catuaí) with spacing of 4.0 x 0.75 m. In the chosen area, with regional physiographic representativeness, a grid was established, with regular intervals of 50 m, making a total of 145 points on 31.7 hectares. In each point of the crossing of this grid, soil sample were taken in the depths of 0.0 - 0.20 m and 0.20 - 0.40 m, for the evaluation of physical, granulometric and chemical attributes. A sample unit consistes of nine plants were built at each sample point for collection of qualitative and quantitative attributes of yield (production, percentage of grain in the sieves 16, 17, 18 and the type of drink). The study area was intensively sampled to assess the thickness of solun, which established the limit of 1.6 m for the presence of gravel which allowed the division of the area into two compartments. Was made the statistical analysis, geostatistical and multivariate data analysis. All physical attributes studied at both depths, showed spatial dependence. Small variations in the forms of the relief conditioned differentiated variability of these attributes. The results of multivariate analysis showed that the study of variance of soil attributes can be summarized in the study of only a few ... (Complete abstract click access below)
|
25 |
Atributos físicos de Latossolo cultivado com cana-de-açúcar e adubado com dejetos de animais de criação intensiva / Physical attributes of a Latosol cultivated with sugarcane and fertilized with manure from intensive animal husbandryGomides, Juliana do Nascimento 20 April 2009 (has links)
Fundação de Amparo a Pesquisa do Estado de Minas Gerais / The cultivation of sugarcane is in strong expansion in the Cerrado region, requiring
management techniques to maintain the soil physical quality. The use of animal s
manure from intensive husbandry constitutes an alternative to reduce the physical
degradation of the poor soil use due to lower cost with chemical fertilizations and,
mostly, making possible the sustainable use of manures that present great polluting
potential. Thus, this research analyzed the use of manures in nature or composted as
alternatives to minimize the negative impacts in the soil, from sugarcane cultivation,
evaluating its effect in the soil s structure and other physical attributes. The area of the
research was located in the Farm of Cia Mineira of Sugar and Alcohol, county of
Uberlândia-MG. The experimental design was randomized blocks, in a 5x2x2 factorial,
with split plots in space, corresponding to five types of fertilization: chicken manure,
turkey manure, cattle manure, organic compost and the control, constituted of mineral
fertilizer for the sugarcane plants, all of them combined, or not, with gypsum,
previously mixed to the fertilizers and applied in the furrow; at two depths and two
distinct times of the year, at the rainy and dry seasons. Soil samples were collected in
January and July, in the depths of 0-25 cm and 25-50 cm, and were evaluated for
dispersed clay in water, flocculation degree, aggregate stability in water, geometric
average diameter, soil organic matter, soil density, microporosity, macroporosity and
total porosity according of methodology described by Embrapa (1997). The data were
submitted to the analysis of variance and the averages of the factors compared by the
Tukey test at 0.05 of significance. It was observed that the different types of manures
affected the soil physical attributes in distinct ways. The presence of gypsum, mixed to
the different types of organic fertilizer, made possible a greater efficiency of these in the
recovery of the majority of the analyzed physical attributes, and the greatest effect was
observed for the depth of 25-50 cm in the soil. Among the types of organic fertilizer
used, cattle manure mixed with or without gypsum was the one contributing the most to
increase total porosity and to reduce soil density. The chemical fertilizer negatively
affected dispersed clay in water and, consequently, the reduction of the soil flocculation
degree. However, for the other fertilizers analyzed, the dispersed clay in water showed
value reductions in the dry season, with greater movement of the clay in soil columns.
The greatest values of geometric average diameter and soil organic matter were
observed in the rainy season, while the presence of gypsum mixed to fertilizer favored
the formation of greater aggregates in the depth of 25-50 cm. The soil physical
properties, for the attributes evaluated, varied distinctly between the rainy and the dry
period of the year, reflecting the importance of moisture in the soil. / A cultura da cana-de-açúcar encontra-se em forte expansão para a região do cerrado,
necessitando de técnicas de manejo, visando à qualidade física do solo. O uso de dejetos
de animais de criação intensiva constitui uma alternativa para reduzir a degradação
física, baixar custo com adubações químicas e, sobretudo possibilitar uso sustentável
dos dejetos que apresentam grande efeito poluidor. Assim, esta pesquisa teve como
objetivo estudar o uso de dejetos in natura ou compostado como uma alternativa para
minimizar os impactos negativos no solo, advindos do cultivo da cana, avaliando sua
influência na estruturação do solo e em outros atributos físicos. A área da pesquisa
localizou-se na Fazenda da Cia Mineira de Açúcar e Álcool do Triângulo Mineiro Ltda,
município de Uberlândia MG. O delineamento experimental foi em blocos casualisados
(DBC), em esquema fatorial de parcelas subdivididas no espaço, em 5x2x2,
correspondendo a cinco tipos de adubo: cama de frango (CF), cama de peru (CP), adubo
compostado (AC), esterco bovino (EB) e a testemunha, constituída por fertilizante
mineral para a cultura, o MAP, todos combinados com a presença e/ou a ausência de
gesso agrícola, previamente misturado ao adubo e aplicado no sulco de plantio da canade-
açúcar; analisado em duas profundidades e em duas épocas distintas do ano, período
das chuvas e seco. Amostras de solo retiradas em janeiro e em julho, nas profundidades
de 0-25 cm e 25-50 cm, foram avaliadas em argila dispersa em água, grau de floculação,
estabilidade de agregados via úmida, avaliada através do diâmetro médio geométrico
(DMG), matéria orgânica do solo (MOS), densidade do solo, microporosidade,
macroporosidade e porosidade total, conforme metodologia descrita pela Embrapa
(1997). Os resultados obtidos foram submetidos à análise de variância e às médias dos
fatores comparadas pelo teste de Tukey ao nível de 0,05 de significância. Observou-se
que os diferentes tipos de dejetos influenciaram de modo distinto os atributos físicos do
solo. A presença do gesso agrícola, misturado aos diferentes tipos de adubos orgânicos,
possibilitou uma maior eficiência destes na recuperação da maioria dos atributos físicos
analisados, sendo o maior efeito para as profundidades de 25-50 cm no solo. Entre os
tipos de adubos orgânicos utilizados, o esterco bovino misturado com e/ou sem gesso
foi que mais contribuiu para aumentar a porosidade total e reduzir a densidade do solo.
O adubo químico influenciou negativamente a quantidade de argila dispersa em água e
consequentemente redução do grau de floculação do solo. Mas para os demais adubos
analisados, a argila dispersa em água apresentou reduções dos valores no período seco.
Para o DMG os maiores valores encontrados foram para o período chuvoso, a presença
de gesso misturado aos adubos favoreceu a formação de agregados maiores na
profundidade de 25-50 cm. A MOS apresentou diferença significativa para os diferentes
adubos apenas no período chuvoso. O comportamento físico do solo, para os atributos
avaliados, variou de modo distinto entre o período chuvoso e o período seco do ano,
refletindo a importância da umidade no solo. / Mestre em Agronomia
|
26 |
Inter-relações da variabilidade espacial da granulometria do solo e a produtividade do feijoeiro sob plantio diretoKitamura, Aline Emy [UNESP] 15 July 2004 (has links) (PDF)
Made available in DSpace on 2014-06-11T19:29:43Z (GMT). No. of bitstreams: 0
Previous issue date: 2004-07-15Bitstream added on 2014-06-13T18:59:26Z : No. of bitstreams: 1
kitamura_ae_me_ilha.pdf: 2042410 bytes, checksum: 4aa141418d1268c6856d0ede3f60bf61 (MD5) / Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq) / O conhecimento dos atributos do solo, principalmente aqueles relacionados com sua distribuição granulométrica, tem grande influência na produtividade vegetal. No ano agrícola de 2002/2003 foram analisados atributos da planta e do solo: produtividade de grãos do feijoeiro (PG), produtividade de palha (PP), teor de argila (ARG), de silte (SIL) e de areia (ARE) de um Latossolo Vermelho Distroférrico sob plantio direto, do Campus Experimental da Faculdade de Engenharia/UNESP (Ilha Solteira/SP - Brasil: latitude 20°18 S; longitude 52°39 W). O objetivo foi analisar a variabilidade dos atributos pesquisados, de forma a caracterizar suas dependências espaciais, e as correlações, linear e espacial, entre eles. Foi instalada uma malha experimental para a coleta dos dados estabelecida com espaçamento de 10 x 10 m, contendo 135 pontos amostrais distribuídos numa área de 8000 m2. A variabilidade dos dados foi baixa para a ARG, média para o SIL e ARE, e alta para a PP e PG. A maioria apresentou moderada dependência espacial, com alcances entre 19,8 m (SIL) e 103,1 m (ARE), e de 29,8 m para a PG. Foi observada uma evidente correlação espacial entre todos os que apresentaram, dois a dois, os maiores coeficientes de correlação. Entretanto, entre aqueles que apresentaram os menores, os dados sugeriram, em alguns casos, haver uma moderada correlação espacial. / The knowledge of the soil attributes, mainly those related with its particle-size diameter, has great influence on the vegetal productivity. In the agricultural year of 2002/2003 attributes of the plant and soil had been analyzed: grain productivity of common bean (GP), straw productivity (SP), clay content (CL), silt (SI) and of sand (SA) of a Red Latosol under no-tillage, pertainning to Experimental Station of Faculdade de Engenharia/UNESP (Ilha Solteira/SP - Brazil: 20º18' Latitude S; 52º39' Longitude W). The objective was to analyze the variability of the researched attributes to characterize its spatial dependences. Also, to study the correlations, linear and spatial, between them. An experimental grid for the collection of the data was installed, established with distance of 10 x 10 m, contends 135 points shows in an area of 8000 m2. The data variability was low for the CL, medium for the SI and SA, and high for SP and GP. The majority then presented moderate spatial dependence, with ranges between 19.8 m (SI) and 103.1 m (SA), and of 29.8 m for the GP. An evident spatial correlation was observed between all the ones that had presented, two to two, the biggest correlation coefficients. However, between the ones minors, the data had suggested, in some cases, to have an moderate spatial correlation.
|
27 |
Modelos de capacidade de suporte de carga e suas relações com atributos físicos e mecânicos em argissolo amarelo distrocoeso.LIMA, Renato Paiva de 18 July 2013 (has links)
Submitted by (lucia.rodrigues@ufrpe.br) on 2016-10-11T14:11:57Z
No. of bitstreams: 1
Renato Paiva de Lima.pdf: 524535 bytes, checksum: 47be2d27255026d21fdeb8e8a90a484f (MD5) / Made available in DSpace on 2016-10-11T14:11:57Z (GMT). No. of bitstreams: 1
Renato Paiva de Lima.pdf: 524535 bytes, checksum: 47be2d27255026d21fdeb8e8a90a484f (MD5)
Previous issue date: 2013-07-18 / Models that predict pre-consolidation stress in Ultisol are scarce, given the importance of these soils for the production of sugarcane in the Northeast. The current study aimed to fit linear and nonlinear regression models and study the relationship of soil physical attributes on pre-consolidation stress (σp) variation. On a plot, 42 points were delimited to get samples in the layers 0-0.20 and 0.20-0.40 m, totaling 84 samples. Deformed and undeformed samples were collected to obtain the variables: water content (θ), bulk density (BD), soil resistance to penetration (RP), organic carbon (OC), clay content (C), plastic limit (PL) and liquid limit (LL), as well as the pre-consolidation stress (σp). Four models were fitted to predict the σp: linear multiple regression, two nonlinear multiple model and charge supporter capacity model. Was also held for each layer a principal component analysis was performed and, after obtaining the scores for those components retained, a linear multiple regression model was fitted for the σp data to establishment of the relationships. The average of σp was 73.0 kPa. The multiple linear regression model was the best fit soil conditions and management of the area in the two analyzed layers. Only soil bulk density and penetration resistance contributed significantly to variation σp models with the best settings. The θ and the OC showed negative relations with σp; while BD, RP, C, LL and PL showed positive relation. Higher values of σp are associated with higher values of BD, RP, C, LL and PL, as well as smaller values are linked with the increase of OC concentration and θ. / Modelos que predizem a tensão de pré-consolidação em Argissolo Amarelo distrocoeso são escassos na literatura, dada a importância desses solos para produção de cana-de-açúcar no Nordeste. O presente estudo teve como objetivos ajustar modelos de regressão lineares e não lineares e estudar as relações dos atributos físicos do solo na variação da tensão de pré-consolidação (σp). O trabalho foi realizado em área de Argisssolo Amarelo distrocoeso cultivado com cana-de-açúcar. Em um talhão, foram demarcados 42 pontos e coletadas amostras nas camadas 0-0,20 e 0,20-0,40 m, totalizando 84 pontos amostrais. Foram coletadas amostras deformadas e não deformadas para obtenção das variáveis: umidade do solo (θ), densidade do solo (DS), resistência à penetração (RP), carbono orgânico (CO), teor de argila (TA), limite de plasticidade (LP) e limite de liquidez (LL), além da tensão de pré-consolidação (σp). Foram ajustados quatro modelos para predição da σp: regressão linear múltipla, dois modelo não lineares e um modelo não linear de capacidade de suporte de carga, bem como, foi realizada análise de componentes principais, em cada uma das camadas estudadas, que após obtenção dos escores dos componentes principais retidos em cada camada de solo, um modelo de regressão linear múltiplo foi ajustado aos dados de σp para estabelecimento das relações. A σp média foi de 73,0 kPa; sendo o modelo de regressão linear múltipla o que melhor se ajustou as condições de solo e manejo da área nas duas camadas analisadas. Apenas a densidade do solo e a resistência à penetração contribuíram significativamente para variação da σp nos modelos com os melhores ajustes. A θ e o CO apresentaram relações negativas com a σp, enquanto DS, RP, TA, LL e LP positivas. Maiores valores de σp estão associados a maiores valores de DS, RP, TA, LL e LP, assim como os menores a um aumento da concentração de CO e da θ.
|
28 |
Atributos físicos do solo e a produtividade de soja e milho em áreas sob tráfego controlado de máquinas agrícolas / Soil phusical properties and yeld under controled traffic farmingGirardello, Vitor Cauduro 27 February 2014 (has links)
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior / The Soil compaction has been induced in the no-tillage (NT), mainly due to machinery traffic conditions in soils with high humidity. This traffic is essential for crop management, impossible to put out of the field. Alternatively to try to solve this problem the concept of controlled traffic system (CTF) of machines, which is the containment and permanent separation of local traffic machine of free traffic. In most incipient case of disciplined traffic system of the machines is an initial alternative to full deployment. In this sense an experiment was conducted during two crop years in a commercial area, managed under the NT using techniques of AP in the Não Me Toque city, RS state. The soil is Red Latossol with Cfa climate following Koppen classification. The treatments were: a) No Traffic (ST) b) traffic Spray (TP) c) Traffic Tractor (TT) and d) Maximum Traffic (TM). The assessments were: bunk density, macroporosity, microporosity, total porosity in the soil layers: 00-0.05; 0.05 0.10; 0,10 0.20 e 0.20 -0.30 m , water infiltration, penetrometer resistence (PR), root systems and yeld in the corn and soybean. In Céu Azul city, PR state, have another experiment was also conducted to study the traffic discipline within the commercial fields,but only soyebean field and with similar treatments to those used in RS. The results obtained in Paraná was observed that treatments with control traffic farming had 8% less yeld. Changes in soil physical properties not change significantly after the traffic. In the two case investigated it was found that the controlled traffic has feasibility in implementation and improvement in soil physical properties and increased yeld of corn and soybeans in southern Brazil. / A compactação do solo tem sido induzida no sistema de plantio direto (SPD), principalmente devido ao tráfego de máquinas em condições de solos com elevada umidade. Este tráfego dentro da lavoura é essencial para o manejo das culturas, impossível de ser extinto de dentro da lavoura. Como alternativa para tentar solucionar este problema surge o conceito do sistema de tráfego controlado de máquinas, que é o confinamento e a separação permanente dos locais de tráfego de máquinas dos locais livre de tráfego. Neste sentido foi conduzido um experimento com duração de dois anos em uma área comercial, manejada sob o SPD utilizando técnicas de AP no município de Não Me Toque, RS. O solo do local é um Latossolo Vermelho com clima subtropical do tipo Cfa úmido segundo a classificação de Koppen. A precipitação média oscila entre 1.500 a 1.700 mm e a temperatura média anual é de 18.7ºC. Os tratamentos investigados foram: a) Sem tráfego (ST); b) Tráfego do pulverizador (TP); c) Tráfego do trator (TT) e d) Tráfego máximo (TM). As principais avaliações foram: densidade do solo (Ds), macroporosidade (Ma), microporosidade (mi), porosidade total (pt), nas camadas 00-0,05; 0,05-0,10; 0,10-0,20 e 0,20-0,30 m, infiltração de água, resistência a penetração (RP), avaliação do sistema radicular e produtividade da culturas de milho e soja. Na cidade de Céu Azul, PR também foi realizado um experimento visando estudar o disciplinamento do tráfego dentro de uma lavoura comercial, com tratamentos similares aos utilizados no RS, porém com a cultura da soja. Os resultados obtidos no RS demonstraram que o tráfego de máquinas ocasionou o aumento da Ds e da RP, a redução da Ma e infiltração de água no solo, além de causar uma redução de até 24,0 e 42,0% na produtividade da cultura do milho e soja respectivamente. Foi obtida uma relação positiva (r2= 0,70) entre o aumento do número de passadas do trator e a RP. Os resultados obtidos no Paraná foram observados que os tratamentos com o tráfego de máquinas apresentaram 8% a menos na produtividade das culturas, embora as alterações nos atributos físicos do solo não sofreram alterações significativas após o tráfego. De acordo com os dois experimentos investigados, constatou-se que o sistema de tráfego controlado possui viabilidade na sua implementação e proporcionou melhoria nas condições físicas do solo e aumento na produtividade da cultura do milho e da soja no sul do Brasil.
|
29 |
INFLUÊNCIA DO RELEVO E DE DIFERENTES USOS SOB ATRIBUTOS FÍSICOHÍDRICO EM LATOSSOLO / INFLUENCE OF TERRAIN AND DIFFERENT USES ON PHYSICAL AND HYDRICAL ATTRIBUTES IN LATOSOLOPanziera, André Gonçalves 03 October 2016 (has links)
Fundação de Amparo a Pesquisa no Estado do Rio Grande do Sul / Soil is an important means of supplying water to meet the need for agricultural management systems. It
is its physical-water properties that make it capable of regulating the availability of water. This study
evaluates how the relief forms and different uses influence some physical-water properties of a Red
Latosol on a slope in the Rio Grande do Sul Plateau region, and what the implications of these attributes
may be on soil water dynamics. In one part of the experimental area with herbaceous cultivation without
agricultural traffic, and in another with the no-tillage system, with crops rotation of wheat, soybean and
oat, as well as, the use of machinery on the soil. Ten representative sites of the study area were selected
as experimental units. In these experimental units, a trench of 0.9 m depth, 1.5 m length and 1.0 m width
was excavated. Three depths 30, 60 and 90 cm were delimited for each experimental unit. At each
depth, 5 samples of soil with non-deformed structure were collected, being 15 per experimental unit and
150 throughout the study area. All profiles were morphologically examined to characterize the structure,
consistency, color, amount of roots, pore type, horizons and soil spots. Physical analyzes of soil density,
total porosity, texture and saturated hydraulic conductivity were performed. Levels contours were
generated from a topographic planialtimetric survey. In the computational program, it generated
preferential arrows of surface runoff and slope interval. It was characterized, for each experimental unit,
the forms of slopes. It was found that, in general, in the study area, the curvature in the profile and plane
were convergent concave, respectively. Based on this information, the flow of the area tends to converge
to a single region, with flows influenced by declivity ranging from 1.83% to 20% in the area as a whole.
In the area under no-tillage system, as a function of the saturated hydraulic conductivity, the vertical
movement of the water, when it reached depths of 60 cm, was observed. The clay texture was
preponderant to 90 cm depth, indicating distribution of the pore size that leads tortuosity of the preferred
water paths for storage. Hydrologically, the Latosol under study contains physical characteristics that
imply the generation of sub-superficial lateral flow. The flow pattern is governed up to 30 cm deep by
angle variations and position of the slope, controlling the soil's ability to conduct water, infiltrate the
profile, and transport sediments. The high percentage of clay is the main factor governing the Dynamics
of water in 60 and 90 cm, be attributed to the nature of the soil. / O solo é um importante meio de suprimento de água para atender necessidade em sistemas
de manejo agrícola. São suas propriedades físico-hídricas que o tornam capaz de regular a
disponibilidade de água. Esse estudo avaliar como as formas de relevo e diferentes usos influenciam
algumas propriedades físico-hídricas de um Latossolo Vermelho em uma encosta na região do Planalto
do Rio Grande do Sul, e quais podem ser as implicações desses atributos na dinâmica de água no solo.
Numa parte da área experimental com cultivo de ervais sem tráfego agrícola, e, em outra, com o sistema
plantio direto, com rotação das culturas do trigo, soja e aveia, bem como, o uso de maquinário sobre o
solo. Selecionou-se, 10 locais representativos da área de estudo como unidades experimentais. Nestas
unidades experimentais, escavou-se uma trincheira de 0,9 m de profundidade, 1,5 m de comprimento
e 1,0 m de largura. Delimitou-se três profundidades para cada unidade experimental, sendo estas 30,
60 e 90 cm. Em cada profundidade, coletou-se 5 amostras de solo com estrutura não deformada, sendo
então 15 por unidade experimental e 150 em toda a área de estudo. Examinou-se morfologicamente
todos os perfis para caracterizar a estrutura, consistência, cor, quantidade de raízes, tipo de poros,
horizontes e manchas do solo. Realizaram-se análises físicas da densidade do solo, porosidade total,
textura e condutividade hidráulica saturada. Gerou-se curvas de níveis da área, a partir de levantamento
topográfico planialtimétrico. Em programa computacional, gerou setas preferenciais de escoamento
superficial e intervalo de declividade. Caracterizou-se, para cada unidade experimental quanto as
formas de vertentes. Constatou-se que, em geral, na área de estudo, a curvatura no perfil e no plano
foram côncavas convergentes, respectivamente. Com base nessa informação, o fluxo da área tende a
confluir a uma única região, com fluxos influenciados por declividade que varia de 1,83% a 20% na área
como um todo. Na área de solo sob sistema plantio direto, em função da condutividade hidráulica
saturada, foi constatado a diminuição do movimento vertical da água, quando esta alcança
profundidades de 60 cm. A textura argilosa foi preponderante a 90 cm de profundidade, indicando
distribuição do tamanho dos poros que conduzem tortuosidade dos caminhos preferenciais da água
para armazenamento. Hidrologicamente, o Latossolo em estudo contém características físicas que
implicam na geração de fluxo lateral sub-superficial. O padrão de escoamento é governado até 30 cm
de profundidade pelas variações de ângulo e a posição da vertente, controlam a capacidade do solo de
conduzir a água, infiltrar no perfil, e transportar sedimentos O elevado percentual de argila é o principal
fator que governa a dinâmica de água em 60 e 90 cm, sendo atribuídos a natureza do solo.
|
30 |
Implantação da cultura de cana-de-açúcar em argissolo vermelho do noroeste paulista : preparo do solo e uso de gesso /Lima, Ronaldo Cintra. January 2012 (has links)
Orientador: Luiz Malcolm Mano de Mello / Banca: Salatiér Buzetti / Banca: Élcio Hiroyoshi Yano / Banca: Carlos Eduardo Angeli Furlani / Banca: Carlos Sérgio Tiritan / Resumo: A cana-de-açúcar se destaca como sendo uma importante cultura do mundo tropical, e em especial para o Brasil que vem se destacando como o maior produtor mundial. A demanda crescente, no mercado interno e externo, por combustíveis renováveis, especialmente o Etanol, passou a atrair investimentos para a implantação de novas áreas de cana-de-açúcar para atender a indústria. A inclusão de novas regiões no processo produtivo de cana-de- açúcar, requer maior atenção aos fatores de produção, dentre eles o manejo e correção dos solos, pois é imprescindível a eliminação de impedimentos físicos e químicos do solo, causados por camadas compactadas, toxidez por alumínio, acidez e teores inadequados de cálcio e outros nutrientes. Para tanto, a escolha da modalidade e equipamento de preparo do solo mais adequado, além do uso de corretivos de acidez e condicionador de subsuperfície do solo, é de grande importâcia para proporcionar um ambiente mais propício para que a cultura da cana-de-açúcar desenvolva-se e expresse o seu potencial produtivo. O trabalho foi conduzido em área de implantação de cana-de-açúcar, anteriormente ocupada com pastagem há mais de 15 anos, da Usina Vale do Paraná no município de Suzanápolis - SP, região do Noroeste Paulista. Foi utilizada a variedade RB92-5345 com espaçamento de 1,5 m entrelinhas, em Argissolo Vermelho Distrófico abrúptico textura arenosa/média. O delineamento experimental utilizado foi de blocos ao acaso, com seis tratamentos, em esquema fatorial 3 x 2 e seis repetições, sendo os tratamentos constituídos por preparo de solo com três modalidades: arado de aivecas, escarificador e grade pesada; com (1 t ha-1) de gesso e sem gesso. O trabalho objetivou avaliar qual sistema de preparo do solo, com e sem uso de gesso proporciona melhores... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: The sugarcane stands out as being an important crop in the tropical world, and especially to Brazil that has emerged as the largest producer. The increasing demand in domestic and foreign markets for renewable fuels, especially ethanol, began to attract investments to roll out new areas of sugarcane to meet the needs of industry. The inclusion of new regions in the productive process of 'sugarcane requires greater attention to factors of production, including management and correction of soil, it is necessary to eliminate physical and chemical impediments of the soil, caused by compacted layers, aluminum toxicity, acidity, and inadequate levels of calcium and other nutrients. To this end, the choice of modality and tillage equipment most appropriate, besides the use of corrective agents of acidity and subsurface soil conditioner is of great importance to provide a more favorable environment for sugarcane crop develop itself and to express their productive potential. The experiment was conducted in an area of expansion of sugarcane at Usina Vale do Paraná in the city Suzanápolis - SP, in the Northwest of Sao Paulo in the area previously occupied by grazing for over 15 years. In the implementation of crop was used variety RB92-5354 at a spacing of 1.5 m between rows in Red Argisol Dystrophic abrupt sandy texture / medium. The experimental design used was a randomized block design with six treatments in a factorial scheme 3 x 2 and six repetitions, and the main treatments consisting of soil preparation with three modalities: moldboard plow, chisel plow and harrow and two secondary treatments with (1 t ha -1) and without gypsum. The study aimed to evaluate which system of tillage, with and without the use of gypsum provides better conditions for development and technological qualities in the sugarcane crop. For this... (Complete abstract click electronic access below)
|
Page generated in 0.0785 seconds