Poly(ethylene oxide) (PEO) is known for facilitating the electrospinning of biopolymer solutions, that are otherwise not electrospinnable. The objective of this study was to investigate the mechanism by which PEO enables the formation of whey protein isolate (WPI) electrospun fibers under different pH conditions. This investigation revealed that the addition of PEO increased the viscosity of WPI/PEO (10% w/w WPI; 0.4% w/w PEO) solutions. Difference in pH levels of the polymer solutions affected electrospinnability and fiber morphology. Acidic solutions resulted in smooth fibers (700 ± 105 nm) while neutral solutions produced spheres (2.0 ± 1.0 um) linked with ultrafine fibers (138 ± 32 nm). In comparison, alkaline solutions produced fibers (191 ± 38 nm) that were embedded with spindle-like beads (1.0 ± 0.5 um). Sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) and matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) analyses revealed that the native globular configuration of WPI was not altered under neutral conditions. By contrast, the electrophoresis and spectrometry data indicated that WPI was denatured and hydrolyzed under acidic conditions, which facilitated the formation of smooth fibers. C13 nuclear magnetic resonance (NMR) and attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopies showed that the increase random coil and a-helix secondary structures in WPI contributed to the formation of bead-less electrospun fibers. Also, C13 NMR analysis showed no evidence of chemical interaction between WPI and PEO. Scanning transmission electron microscopy coupled with energy dispersive X-rays (STEM-EDAX) revealed that WPI was uniformly distributed within WPI/PEO electrospun fibers. Observations by scanning electron microscopy (SEM) and field emission scanning electron microscopy (FESEM) indicated that fibers possessed a solid core. All these findings suggested that PEO enables the formation of WPI/PEO electrospun fibers by entanglement/entrapment/deposition. Preliminary studies were conducted on hydroxypropyl methyl cellulose (HPMC). In the absence of PEO, HPMC enabled the formation of WPI electrospun fibers under acidic conditions (124 ± 46 nm). FTIR analyses indicated that there was no interaction between HPMC and WPI, suggesting that HPMC aided in the electrospinning of WPI fibers, also by entanglement/entrapment/deposition. Hence, HPMC and PEO aid in the electrospinning of WPI fibers by entanglement/entrapment/deposition, which can be manipulated by alterations in the protein configuration and solution properties. / Natural Sciences and Engineering Research Council (NSERC) of Canada and the Dairy Farmers of Ontario (DFO)

Copolymer-cobalt complexes have been formed by thermolysis of dicobalt octacarbonyl in solutions of copolysiloxanes. The copolysiloxane-cobalt complexes formed from toluene solutions of PDMS-b-[PMVS-co-PMTMS] block copolymers were annealed at 600-700 °C under nitrogen to form protective siliceous shells around the nanoparticles. Magnetic measurements after aging for several months in both air and in water suggest that the ceramic coatings do protect the cobalt against oxidation. However, after mechanical grinding, oxidation occurs. The specific saturation magnetization of the siliceous-cobalt nanoparticles increased substantially as a function of annealing temperature, and they have high magnetic moments for particles of this size of 60 emu g⁻¹ Co after heat-treatment at temperatures above 600 °C. The siliceous-cobalt nanoparticles can be re-functionalized with aminopropyltrimethoxysilane by condensing the coupling agent onto the nanoparticle surfaces in anhydrous, refluxing toluene. The concentration of primary amine obtained on the surfaces is in reasonable agreement with the charged concentrations. The surface amine groups can initiate L-lactide and the biodegradable polymer, poly(L-lactide), can be polymerized directly from the surface. The protected cobalt surface can also be re-functionalized with poly(dimethylsiloxane) and poly(ethylene oxide-co-propylene oxide) providing increased versatility for reacting polymers and functional groups onto the siliceous-cobalt nanoparticles.Phthalonitrile containing graft copolysiloxanes were synthesized and investigated as enhanced oxygen impermeable shell precursors for cobalt nanoparticles. The siloxane provided a silica precursor whereas the phthalonitrile provided a graphitic precursor. After pyrolysis, the surfaces were silicon rich and the complexes exhibited a substantial increase in Ms. Early aging data suggests that these complexes are oxidatively stable in air after mechanical grinding. Aqueous dispersions of macromolecule-magnetite complexes are desirable for biomedical applications. A series of vinylsilylpropanol initiators, where the vinyl groups vary from one to three, were prepared and utilized for the synthesis of heterobifunctional poly(ethylene oxide) oligomers with a free hydroxy group on one end and one to three vinylsilyl groups on the other end. The oligomers were further modified with carboxylic acids via ene-thiol addition reactions while preserving the hydroxyl functionality at the opposite terminus. The resulting carboxylic acid heterobifunctional PEO are currently being investigated as possible dispersion stabilizers for magnetite in aqueous media. / Ph. D.

Superparamagnetic Magnetite (Fe3O4) nanoparticles were synthesized and complexed with carboxylate-functionalized block copolymers, and aqueous dispersions of the complexes were investigated as functions of their chemical and morphological structures. The block copolymer dispersants possessed either poly(ethylene oxide), poly(ethylene oxide-co-propylene oxide), or poly(ethylene oxide-b-propylene oxide) outer blocks, and all contained a polyurethane center block with pendant carboxylate functional groups. The complexes were formed through interactions of the carboxylates with the surfaces of the magnetite nanoparticles. Initial efforts utilized an aqueous coprecipitation method for the synthesis of magnetite nanoparticles, which yielded polydisperse magnetite nanoparticles. The nanoparticle complexes were characterized with a range of solution- and solid-state techniques including TGA, XPS, TEM, VSM, DLS and zeta potential measurements. DLVO calculation methods, which sum the contributions from van der Waals, steric, electrostatic and magnetic forces were utilized to examine the interparticle potentials in the presence and absence of external magnetic fields. Compositions were identified wherein a shallow, attractive interparticle potential minimum appears once the magnetic term is applied. This suggested the possibility of tuning the structures of superparamagnetic nanoparticle shells to allow discrete dispersions without a field, yet permit weak flocculation upon exposure to a field. This property has important implications for biomedical applications where movement of particles with an external magnetic field is desirable. In a second study, well-defined, narrow size dispersity magnetite nanoparticles were synthesized via the thermolysis of an iron (III) acetylacetonate (Fe(acac)3) precursor in the presence of benzyl alcohol. The magnetite nanoparticles were coated with triblock and pentablock copolymers possessing poly(ethylene oxide) and poly(propylene oxide-b-ethylene oxide) tailblocks and the carboxylate-functional anchor block. DLVO calculations were applied to the new magnetite particles and diagrams of potential energy versus interparticle distance indicated the predominant effect of steric and magnetic interactions on the particle stability. Exposure of the pentablock copolymer-magnetite complexes in phosphate buffered saline to a 1500 Oe magnetic field with concomitant DLS measurements indicated flocculation of the magnetic nanoparticles. DLS measurements showed increased hydrodynamic radii and scattering intensities with time. / Ph. D.

Amphiphilic block copolymers consisting of poly(ethylene oxide) and poly(lactide) have great potential for formulating drug delivery systems. Our approach was to synthesize poly(ethylene oxide-b-D,L-lactide), (PEO-b-PDLLA), block copolymers with controlled molecular weights and good functionality on the poly(ethylene oxide) end for the design of potential core-shell delivery vehicles for HIV drugs. PEO-b-PDLLA block copolymer was used as a polymeric nanocarrier to encapsulate the HIV protease inhibitor, Ritonavir, within magnetite nanoparticles. Well-defined multifunctional polymeric nanoparticles with controlled sizes and size distributions were fabricated by rapid nanoprecipitation using blends of the PEO-b-PDLLA block copolymer with poly(L-lactide), (PLLA) homopolymer. Heterobifunctional PEO oligomers were directly prepared by initiating ethylene oxide with functional alcohols bearing vinylsilane, vinylether and maleimide moieties to provide appropriate end groups for conjugating targeting ligands. The polyethers with narrow molecular weight distributions were utilized as macroinitiators for the synthesis of poly(lactide) block. Heterobifunctional diblock copolymers possessing carboxylic acids were prepared from ene-thiol addition reaction of mercaptoacetic acid across the vinyl group on the PEO end, while preserving the hydroxyl functionality on the other end. Additionally, PDLLAs bearing maleimide functionality with controlled molecular weights were synthesized using maleimide functional initiator. End group modification was performed via  Michael addition using cysteamine hydrochloride to introduce an amino group over the vinyl bond. The resulting carboxylic acid functional PEO-b-PDLLA diblock copolymers, and amino functional PDLLAs are potential biocompatible polymers that can be utilized to encapsulate an array of bioactive molecules, targeting ligands. / Master of Science

The research presented in this thesis includes a detailed investigation into factors influencing ionic conductivity in the crystalline polymer electrolyte PEO₆:LiPF₆. It has previously been shown that preparing PEO₆:LiPF₆ with PEO modified with larger –OC₂H₅ end groups increases ionic conductivity by one order of magnitude [¹],primarily due to disruption of the crystal structure caused by the inclusion of the larger end groups. In this study it is shown that by reducing PEO molecular weight in crystalline PEO₆:LiPF₆ ionic conductivity is also increased. This was attributed to an increasing concentration of polymer chain end regions upon lowering molecular weight resulting in the creation of more defects, as well as possible increases in crystallite size resulting in longer continuous pathways for ion transport. Similar results were observed using both polydispersed and monodispersed PEO to prepare complexes. In addition, it is demonstrated here that ionic conductivity in crystalline polymerelectrolytes is not confined to PEO₆:LiXF₆ (X=P, As, Sb)[²][³] type materials. The structures and ionic conductivity data are reported for a series of new crystalline polymer complexes: the alkali metal electrolytes. They are composed of low molecular weight PEO and different alkali metal hexafluoro salts (Na⁺, K⁺ and Rb⁺), and include the best conductor poly(ethylene oxide)₈:NaAsF₆ discovered to date [⁴], with a conductivity 1.5 orders of magnitude higher than poly(ethylene oxide)₆:LiAsF₆. A new class of solid ion conductor is reported: the crystalline small-molecule electrolytes. Such materials consist of lithium salts dissolved in low molecular weight glyme molecules [CH₃O(CH₂CH₂O)[subscript(n)]CH₃, n=1-12], forming crystalline complexes [⁵][⁶]. These materials are soft solids unlike ceramic electrolytes and unlike polymer electrolytes they are highly crystalline, are of low molecular weight and have no polydispersity. By varying the number of repeat units in the glyme molecule, many complexes may be prepared with a wide variety of structures. Here, ionic conductivity and cation transference number (t₊) data for several such complexes is presented [⁷][⁸][⁹].These complexes have appreciable ionic conductivities for crystalline complexes and their t₊ values vary markedly depending on the glyme molecule utilized. The differences in t₊ values can be directly attributed to differences in their crystal structures. [¹] Staunton, E., Andreev, Y.G. & Bruce, P.G. Factors influencing the conductivity of crystalline polymer electrolytes. Faraday Discussions 134, 143-156 (2007). [²] Gadjourova, Z., Andreev, Y.G., Tunstall, D.P. & Bruce, P.G. Ionic conductivity in crystalline polymer electrolytes. Nature 412, 6846 (2001). [³] Stoeva, Z., Martin-Litas, I., Staunton, I., Andreev, Y.G. & Bruce, B.G. Ionic Conductivity in the Crystalline Polymer Electrolytes PEO₆:LiXF₆, X = P, As, Sb. J. Am. Chem. Soc. 125, 4619-4626(2003). [⁴] Zhang, C., Gamble, S., Ainsworth, D., Slawin, A.M.Z., Andreev, Y.G. & Bruce, P.G. Alkali metal crystalline polymer electrolytes. Nature Materials 8, 580-584 (2009). [⁵] Henderson, W.A., Brooks, N.R., Brennessel, W.W. & Young Jr, V.G. Triglyme-Li⁺ Cation Solvate Structures: Models for Amorphous Concentrated Liquid and Polymer Electrolytes (I). Chem. Mater. 15, 4679-4684 (2003). [⁶] Henderson, W.A., Brooks, N.R. & Young Jr, V.G. Tetraglyme-Li⁺ Cation Solvate Structures: Models for Amorphous Concentrated Liquid and Polymer Electrolytes (II). Chem. Mater. 15, 4685-4690 (2003). [⁷] Zhang, C., Andreev, Y.G. & Bruce, P.G. Crystalline small-molecule electrolytes. Angewandte Chemie, International Edition 46, 2848-2850 (2007). [⁸] Zhang, C., Ainsworth, D., Andreev, Y.G. & Bruce, P.G. Ionic Conductivity in the Solid Glyme Complexes [CH₃O(CH₂CH₂O)[subscript(n)]CH₃]:LiAsF₆ (n = 3,4). J. Am. Chem. Soc. 129, 8700- 8701 (2007). [⁹] Zhang, C., Lilley, S.J., Ainsworth, D., Staunton, E., Andreev, Y.G., Slawin, A.M.Z. & Bruce, P.G. Structure and Conductivity of Small-Molecule Electrolytes [CH₃O(CH₂CH₂O)[subscript(n)]CH₃]:LiAsF₆ (n = 8-12). Chem. Mater. 20, 4039-4044 (2008).

The relaxation characteristics of rubbery poly(ethylene oxide) [PEO] networks have been investigated as a function of network composition and architecture via dynamic mechanical analysis and broadband dielectric spectroscopy. A series of model networks were prepared via UV photopolymerization using poly(ethylene glycol) diacrylate [PEGDA] as crosslinker: variations in crosslink density were achieved either by the introduction of water in the prepolymerization reaction mixture, or by the inclusion of mono-functional acrylate such as poly(ethylene glycol) methyl ether acrylate [PEGMEA] or poly(ethylene glycol) acrylate [PEGA]. Copolymerization with mono-functional acrylate led to the insertion of flexible branches along the network backbone, and the corresponding glass-rubber relaxation properties of the copolymers (i.e., Tg, relaxation breadth, fragility) were a sensitive function of network architecture and corresponding fractional free volume. Relatively subtle variations in network structure led to significant differences in relaxation characteristics, and a systematic series of studies was undertaken to examine the influence of branch length, branch end-group, and crosslinker flexibility on viscoelastic response. Dielectric spectroscopy was especially useful for the elucidation of localized, sub-glass relaxations in the polymer networks: the imposition of local constraint in the vicinity of the crosslink junctions led to the detection of a distinctive fast relaxation process in the networks that was similar to a comparable sub-glass relaxation observed in crystalline PEO and in the confined regions of PEO nanocomposites. Gas permeation studies on the model PEGDA networks confirmed their utility as highly-permeable, reverse-selective membrane materials, and strategic control of the network architecture could be used to optimize gas separation performance. Dynamic mechanical and dielectric measurements have also been performed on a semicrystalline polyester, poly(trimethylene terephthalate) [PTT], in order to assess the influence of processing history on the resultant morphology and corresponding viscoelastic relaxation characteristics. Studies on both quenched and annealed PTT revealed the presence of a substantial fraction of rigid amorphous phase (RAP) material in the crystalline samples: dielectric measurements showed a strong increase in relaxation intensity above the glass transition indicating a progressive mobilization of the rigid amorphous phase with increasing temperature prior to crystalline melting.

Ce travail porte sur l’étude de revêtements polysilazane (PSZ) élaborés dans le but d’inhiber l’adhésion des bactéries marines. Deux stratégies ont été étudiées : le greffage de chaînes poly(oxyde d’éthylène) (POE) (350, 750 ou 2000 g/mol) sur les chaînes PSZ par réactions d’hydrosilylation d’une part, et l’incorporation de composés du cuivre dans un film céramique issu de la pyrolyse d’un précurseur PSZ, d’autre part. Les conditions optimales de synthèse des PSZ greffés POE ont été définies afin de limiter notamment la réaction d’isomérisation de l’allyl-POE. La réticulation des PSZ greffés POE est alors effectuée par voie humide à température ambiante et procède par hydrolyse-condensation des fonctions alcoxysilane, SiH et SiN du précurseur PSZ. La prédominance des Si de type T3 (RSi(OSi)3) a été mise évidence par spectrométrie RMN du 29Si à l’état solide. La cristallisation des chaînes courtes de POE (350 g/mol) est totalement inhibée alors que l’aptitude des chaînes longues POE (750 et 2000 g/mol) à cristalliser est préservée. Le caractère hydrophile-hydrophobe et la capacité des films à inhiber l’adhésion bactérienne a été étudiée sur des revêtements à densités de greffons et à longueur de chaînes POE différentes. Les PSZs greffés POE 350g/mol avec un taux de greffage maximal conduisent à l’activité bactérienne la plus élevée de l’ensemble des revêtements étudiés.Les films céramiques incorporant du cuivre ont été préparés par pyrolyse d’un oligovinylsilazane en présence d’acétylacétonate de cuivre II sous atmosphère oxydante ou non oxydante. L’identification des phases des composés du cuivre a été effectuée par analyse DRX. L’environnement réducteur généré lors de la pyrolyse du PSZ favorise la formation d’espèces de cuivre (0) et cuivre (I) au détriment de cuivre (II). Les études bactériennes suggèrent que les cristaux CuO et Cu2O sont plus efficaces que le cuivre métal pour lutter contre l’adhésion bactérienne. / The objective of this work was to develop new polysilazane (PSZ) coatings which can inhibit the adhesion of marine bacteria. Two chemical strategies have been investigated: the grafting of poly(ethylene oxide) (POE) (350, 750, 2000 g/mol) on PSZ chains by hydrosilylation and the association of copper compounds with a pyrolized vinylsilazane matrix. The optimum conditions for grafting POE were defined to have a high selectivity toward olefin hydrosilylation. Crosslinking of POE-graft-PSZ was performed by moisture curing at room temperature. The main reactions occuring during curing are hydrolysis-condensation reactions of alkoxysilane, Si-H and Si-N functionalities. 29Si NMR in the solid state revealed the formation of a large amount of T3 Si [(RSi(OSi)3)]. The crystallization of short POE chains (350 g/mol) was found to be totally inhibited whereas long POE grafts (750 and 2000 g/mol) are still able to crystallize. The hydrophilic-hydrophobic properties and the antibactericidal activity of films with different graft density and POE chain length were studied. The POE (350 g/mol)-graft-PSZ with the greatest graft density were found to have the best antibactericidal activity. The incorporation of copper compounds in a pyrolized oligovinylsilazane was performed using copper acetylacetonate as a copper source. Pyrolysis was conducted in air or in Argon atmosphere. Identification of the copper phases was performed by XRD analysis. The reductive environment during thermal degradation of PSZ was found to favour the formation of copper (0) and copper (I) species relative to copper (II) species. The study of bacterial adhesion suggested that CuO and Cu2O crystals were more effective against bacterial adhesion than copper metal.

A series of pyrene end-labeled monodisperse poly(ethylene oxide)s (PEO(X)-Py2 where X represents the number average molecular weight (Mn) of the PEOs and equals 2, 5, 10 and 16.5 K) and one pyrene mono-labeled PEO (PEO(2K)-Py1) were synthesized and characterized in solution using fluorescence. First, the end-to-end cyclization (EEC) of PEO(X)-Py2 was investigated in seven organic solvents with viscosities (η) ranging from 0.32 to 1.92 mPa•s. The classical Birks scheme was used to globally fit the pyrene monomer and excimer fluorescence decays. The fraction of pyrenes that did not form excimer (ffree) was found to increase with increasing η and Mn. This result was contrary to the assumptions made by Birks’ scheme. To account for this, ffree was assumed to represent the fraction of PEO chains other than the monolabeled polymer impurities that cannot accomplish EEC. A fluorescence blob model (FBM) was applied to handle this assumption in the process of excimer formation for the PEO(X)-Py2 samples in solution. The radius of a blob, Rblob, in organic solvents was determined according to the results retrieved from the FBM. To quantitatively account for the existence of pyrene impurity in pyrene-labeled macromolecules, known amounts of PEO(2K)-Py1 were added into a PEO(2K)-Py2 solution and the fluorescence decays were fitted globally according to the Birks scheme and “model free” (MF) analysis to verify the validation of the MF analysis. The MF analysis was then applied to determine the amounts of 1-pyrenebutyric acid (PyBA) that had been added to a solution of pyrene end-labeled fourth generation dendritic hybrid (Py16-G4-PS). The results demonstrated that the contribution from unwanted fluorescent species could be isolated and quantitatively accounted for by fitting the fluorescence decays of the pyrene monomer and excimer globally with the MF analysis. Since the PEO(X)-Py2 samples form hydrophobic pyrene aggregates in aqueous solution, a sequential model (SM) was proposed to characterize the pyrene excimer formation of PEO(X)-Py2 in water at different polymer concentration (CP). The capture distance over which the pyrenyl end-groups experience hydrophobic forces in water was determined by assuming that the end-to-end distances of the PEO(X)-Py2 samples adopt a Gaussian distribution and that the fraction of pyrenes that are aggregated (fE0) determined by the sequential model corresponds to the fraction of PEO(X)-Py2 chains whose end-to-end distance is smaller than the hydrophobic capture distance. Since a surfactant can interact with a hydrophobically modified water-soluble polymer in aqueous solution, the interactions taking place between PEO(X)-Py2 and sodium dodecyl sulfate (SDS) were investigated at a low PEO(X)-Py2 concentration. The pyrene monomer and excimer fluorescence decays of the PEO(X)-Py2 and SDS solutions were acquired at various SDS concentrations and globally fitted according to the MF analysis to retrieve the parameters that described the kinetics of pyrene excimer formation. At high SDS concentrations above the critical micelle concentration (CMC), the pyrene end-groups of the short-chain samples (PEO(2K)-Py2 and PEO(5K)-Py2) were incorporated inside the same micelle and excimer was formed intramolecularly, while most pyrene groups of the long-chain samples (PEO(10K)-Py2 and PEO(16.5K)-Py2) were isolated into different micelles. Lastly, both the rheological properties and fluorescence behavior of a pyrene-labeled hydrophobically-modified alkali-swellable emulsion (Py-HASE) polymer in basic aqueous solution with SDS were studied. Furthermore, a joint experimental setup that combined a rheometer and a steady-state fluorometer was applied to investigate at the molecular level the effect that a shearing force had on the polymeric network. However, despite the dramatic decrease in solution viscosity with increasing shear rate, no change in the fluorescence spectra was detected, suggesting that changes in the polymeric network that affected the balance of intra- versus intermolecular pyrene associations did not impact the process of excimer formation. Together the experiments described in this thesis represent the broadest set of examples found in the scientific literature where information on the dynamics and level of association of pyrene-labeled polymers has been retrieved through the quantitative analysis of the fluorescence decays acquired with pyrene-labeled polymers in solution.

Poly (Ethylene Oxide) (PEO, with a general formula (CH₂-CH₂-O)[subscript pi] ) is completely soluble in water at room temperature over an extremely wide molecular weight range and has been widely studied by experiment and theory. The objective of our work is to study the solubility behavior by the method of Monte Carlo simulation. The insertion factor lnB, which is equivalent to the infinite dilute Henry's Law Constant, is used to represent the solubility of various molecules in water. Our research started with simple fluid and aqueous solutions of small molecules including hard spheres, inert gases, hydrocarbons and dimethyl ether (DME, as a precursor for PEO). Solubility consists of a favorable energy term and an unfavorable entropy term. Against the common belief of entropy-dominating-hydrophobicity effect, it is actually the ability of the solute to interact with solvent (or the energetic factor) that dominates solubility. The solubility minimum appearing for both hydrophobic and hydrophilic solutes along the water coexistence curve is the result of competition between the favorable energy contribution and the unfavorable entropy contribution. Normal alkanes with carbon number from 1 to 20 have been modeled by LJ chains to study the solubility of non-polar polymer chains in water. Various constraints have been put on the LJ model to evaluate their effect on solubility. No significant difference was observed for LJ chain with or without fixed bond angles, but torsional interaction changed the chain solubility dramatically. The temperature and chain-length effect on chain solubility has been examined and it can be explained by the balancing between the intra-chain interaction and entropy penalty. By choosing the right torsional interaction parameters we may be able to reproduce by simulations the solubility minimum of normal alkanes at C₁₁. PEO was modeled by united atom chains with length up to 30. The most probable distance between two nearest ether oxygens in both vacuum and aqueous solutions matches the hydrogen bond length in bulk water. Hydrogen bonding plays an important role in the unique water solubility behavior of PEO since the water-PEO interaction effectively increases the total number of hydrogen bonds and results in a favorable change in energy. A trans-gauche-trans conformation along the O-C-C-O bonds does enable hydrogen bond formation between one water molecule and two nearest or next nearest ether oxygens. A helix structure is not required for the PEO to have favorable interactions with water. Two polymers with similar structure as PEO but are insoluble in water: Poly (methylene oxide) (PMO) and Poly (propylene oxide) (PPO) have been studied to compare with PEO. Their difference in structure from PEO, though slight, reduces the chance of hydrogen bond forming between water and chains so as to decrease the solubility. / text

A series of pyrene end-labeled monodisperse poly(ethylene oxide)s (PEO(X)-Py2 where X represents the number average molecular weight (Mn) of the PEOs and equals 2, 5, 10 and 16.5 K) and one pyrene mono-labeled PEO (PEO(2K)-Py1) were synthesized and characterized in solution using fluorescence. First, the end-to-end cyclization (EEC) of PEO(X)-Py2 was investigated in seven organic solvents with viscosities (η) ranging from 0.32 to 1.92 mPa•s. The classical Birks scheme was used to globally fit the pyrene monomer and excimer fluorescence decays. The fraction of pyrenes that did not form excimer (ffree) was found to increase with increasing η and Mn. This result was contrary to the assumptions made by Birks’ scheme. To account for this, ffree was assumed to represent the fraction of PEO chains other than the monolabeled polymer impurities that cannot accomplish EEC. A fluorescence blob model (FBM) was applied to handle this assumption in the process of excimer formation for the PEO(X)-Py2 samples in solution. The radius of a blob, Rblob, in organic solvents was determined according to the results retrieved from the FBM. To quantitatively account for the existence of pyrene impurity in pyrene-labeled macromolecules, known amounts of PEO(2K)-Py1 were added into a PEO(2K)-Py2 solution and the fluorescence decays were fitted globally according to the Birks scheme and “model free” (MF) analysis to verify the validation of the MF analysis. The MF analysis was then applied to determine the amounts of 1-pyrenebutyric acid (PyBA) that had been added to a solution of pyrene end-labeled fourth generation dendritic hybrid (Py16-G4-PS). The results demonstrated that the contribution from unwanted fluorescent species could be isolated and quantitatively accounted for by fitting the fluorescence decays of the pyrene monomer and excimer globally with the MF analysis. Since the PEO(X)-Py2 samples form hydrophobic pyrene aggregates in aqueous solution, a sequential model (SM) was proposed to characterize the pyrene excimer formation of PEO(X)-Py2 in water at different polymer concentration (CP). The capture distance over which the pyrenyl end-groups experience hydrophobic forces in water was determined by assuming that the end-to-end distances of the PEO(X)-Py2 samples adopt a Gaussian distribution and that the fraction of pyrenes that are aggregated (fE0) determined by the sequential model corresponds to the fraction of PEO(X)-Py2 chains whose end-to-end distance is smaller than the hydrophobic capture distance. Since a surfactant can interact with a hydrophobically modified water-soluble polymer in aqueous solution, the interactions taking place between PEO(X)-Py2 and sodium dodecyl sulfate (SDS) were investigated at a low PEO(X)-Py2 concentration. The pyrene monomer and excimer fluorescence decays of the PEO(X)-Py2 and SDS solutions were acquired at various SDS concentrations and globally fitted according to the MF analysis to retrieve the parameters that described the kinetics of pyrene excimer formation. At high SDS concentrations above the critical micelle concentration (CMC), the pyrene end-groups of the short-chain samples (PEO(2K)-Py2 and PEO(5K)-Py2) were incorporated inside the same micelle and excimer was formed intramolecularly, while most pyrene groups of the long-chain samples (PEO(10K)-Py2 and PEO(16.5K)-Py2) were isolated into different micelles. Lastly, both the rheological properties and fluorescence behavior of a pyrene-labeled hydrophobically-modified alkali-swellable emulsion (Py-HASE) polymer in basic aqueous solution with SDS were studied. Furthermore, a joint experimental setup that combined a rheometer and a steady-state fluorometer was applied to investigate at the molecular level the effect that a shearing force had on the polymeric network. However, despite the dramatic decrease in solution viscosity with increasing shear rate, no change in the fluorescence spectra was detected, suggesting that changes in the polymeric network that affected the balance of intra- versus intermolecular pyrene associations did not impact the process of excimer formation. Together the experiments described in this thesis represent the broadest set of examples found in the scientific literature where information on the dynamics and level of association of pyrene-labeled polymers has been retrieved through the quantitative analysis of the fluorescence decays acquired with pyrene-labeled polymers in solution.