Because of the shortage of domestic energy resources in Taiwan, more than 97% of the energy has to be imported. The energy price has been increased dramatically during recent years due to the limited supply of conventional primary fossil energy resources. With the economic development and upgrade of people living standard, the electricity power consumption is increased significantly. To solve the problem, different strategies of energy conservation and CO2 emission reduction have been promoted by government to reduce that the peak loading growth and achieve better usage of electricity with more effective load management. This thesis proposes a digital smart meter which integrates the energy metering IC, microprocessor and hybrid communication schemes (Power Line Carrier/ZigBee/RS-485). The load control module and communication module are included in the smart meter to support various application functions. The embedded power management system (PMS) is also proposed to integrate with the smart meter to perform the demand response according to the real-time pricing and load management for residential and commercial customers. The master station can supervise the real-time power consumption of various load components to analyze the power consumption model of customers served and execute the demand load control. The actual demonstration system of embedded PMS has been set up to verify the function of energy management so that the customers have better understanding of power consumption by each appliance. In the future, the implementation of intelligent load control with an emergency load shedding of capability can help utility companies to achieve virtual power generation to enhance the power systems reliability. The customers may also reduce the electricity charge by executing demand response function, which disconnects the electricity service for non essential loads for either system emergency or high electricity peak pricing

This study proposes various methods to harvest the mechanical energy present in railcar suspensions and railroad tracks to generate electricity that is suitable for onboard or trackside electronics, using electromagnetic generators. Compact electromagnetic energy harvesters that can be installed onboard railcars or wayside on railroad tracks are designed, fabricated, and tested. The designs integrate a mechanical motion rectifier (MMR) with embedded one-way clutches in the bevel gears in order to convert the bi-directional mechanical energy that commonly exists in the form of vibrations into a unidirectional rotation of the generator. The ball screw mechanism is configured such that it has reduced backlash and thus can more efficiently harvest energy from low-amplitude vibrations. Two prototype harvesters are fabricated and tested extensively in the laboratory using a suspension dynamometer and in the field onboard a railcar and on a test track. A power management system with an energy storage circuit has also been developed for this onboard harvester. The laboratory evaluation indicate that the harvesters are capable of harvesting power with sufficient current and voltage for successfully powering light electronics or charging a low demand battery pack. The harvested power varies widely from a few to tens of Watts, depending on the resistive load across the harvester and the amplitude and frequency of the mechanical motion. The laboratory test results are verified through field testing. One harvester is tested onboard a freight railcar, placing it across the wedge suspension, to use the small amount of relative displacement at the wedge suspension to harvest energy. A second harvester is placed on a test track to use the vertical motion that occurs due to passing wheels for wayside energy harvesting. Both onboard and wayside tests confirm the laboratory test results in terms of the success of the design concept in providing low-power electrical power. The harvester design is further integrated into a conventional railroad tie for ease of field installation and for improving the efficiency of harvesting the mechanical energy at the rail. The integrated design, referred to as the "smart tie," not only protects the energy harvester, the wiring harness, and supporting electronics from the maintenance-of-the-way equipment, but also positions the harvester in a mechanically advantageous position that can maximize the track-induced motion, and hence the harvested power. Although for testing purposes, the smart tie uses a modified composite tie, it can be integrated into other track tie arrangements that are used for revenue service track, including concrete and wooden ties. A prototype smart tie is fabricated for laboratory testing, and the results nearly surpass the results obtained earlier from the wayside harvester. The smart tie is currently being considered for revenue service field testing over an extended length of time, potentially at a railroad mega site or similarly suitable location. / Doctor of Philosophy / This dissertation proposes three different electromagnetic energy harvesters for harvesting railroad track and railcar suspension vibration energy. The concept is similar to what you may have seen in self-powering flashlights that are often advertised in late-night TV commercials. You shake the flashlight vigorously, which moves an energy harvester devoice and, Voila, the light bulb comes on. The device design in this study uses the mechanical energy that is present in a vehicle or at a railroad track to harvest the mechanical energy that is naturally present in the form of electrical energy, which can then be used for powering electronic devices and sensors of various kinds. Such sensors and electronics would help with improving the operational efficiency of railroads. The energy harvesters can be installed onboard a railcar or at the track. In either case, the movement of the train creates a small amount of vibration energy that is turned into electrical power. When onboard a train the power can be used for sensors, GPS, and similar devices to allow the operator to better monitor the condition and location of the train. Note that most railcars, especially the freight railcars, do not have any onboard electrical power. Similarly, the energy harvester can be installed at the track to convert the small amount of up and down motion that happens with the passing of each wheel into energy that could be used for integration of sensors that make the track "smarter." This means that the sensors can potentially alert the engineers who are responsible for monitoring the track of an existing or impending problem with the track. Both the railcar and track integration of the energy harvester that is designed, fabricated, and tested during this study are exciting concepts that can improve the rail industry in the U.S. This document includes the details of designing efficient energy harvesters, specifically for rail applications. A prototype of the energy harvester is fabricated and tested extensively in the lab and in the field, albeit to a more limited extent. The test results were quite successful, which is why I am telling you about them! Both the laboratory and field test results show that the device holds significant promise for rail applications.

Master of Science / Department of Electrical and Computer Engineering / Noel Schulz / Many situations can cause a fault on a shipboard power system, especially in naval battleships. Batteries and ultra-capacitors are simulated to be backup energy storage devices (ESDs) to power the shipboard power system when an outage or damage occurs. Because ESDs have advantages such as guaranteed load leveling, good transient operation, and energy recovery during braking operation, they are commonly used for electrical ship applications. To fulfill these requirements, an energy management subsystem (EMS) with a specific control algorithm must connect ESDs to the dc link of the motor drive system. In this research, the real-time simulation of shipboard power system (SPS), bidirectional DC-DC converter, EMS, and ESDs are designed, implemented, and controlled on OPAL-RT system to test SPS survivability and ESD performance in various speed operations.

Increase in the awareness environmental conservation is leading the automotive industry into the adaptation of alternatively fueled vehicles. Electric, Fuel-Cell as well as Hybrid-Electric vehicles focus on this research area with aim to efficiently utilize vehicle powertrain as the first step. Energy and Power Management System control strategies play vital role in improving efficiency of any hybrid propulsion system. However, these control strategies are sensitive to the dynamics of the powertrain components used in the given system. A kinematic mathematical model for Plug-in Hybrid Electric Vehicle (PHEV) has been developed in this study and is further optimized by determining optimal power management strategy for minimal fuel consumption as well as NOx emissions while executing a set drive cycle. A multi-objective optimization using weighted sum formulation is needed in order to observe the trade-off between the optimized objectives. Particle Swarm Optimization (PSO) algorithm has been used in this research, to determine the trade-off curve between fuel and NOx. In performing these optimizations, the control signal consisting of engine speed and reference battery SOC trajectory for a 2-hour cycle is used as the controllable decision parameter input directly from the optimizer. Each element of the control signal was split into 50 distinct points representing the full 2 hours, giving slightly less than 2.5 minutes per point, noting that the values used in the model are interpolated between the points for each time step. With the control signal consisting of 2 distinct signals, speed and SOC trajectory, as 50 element time variant signals, a multidimensional problem was formulated for the optimizer. Novel approaches to balance the optimizer exploration and convergence, as well as seeding techniques are suggested to solve the optimal control problem. The optimization of each involved individual runs at 5 different weight levels with the resulting cost populations being compiled together to visually represent with the help of Pareto front development. The obtained results of simulations and optimization are presented involving performances of individual components of the PHEV powertrain as well as the optimized PMS strategy to follow for given drive cycle. Observations of the trade-off is discussed in the case of Multi-Objective Optimizations.

Detta arbete var beställt av Sjöfartshögskolan i Kalmar. Skolan ville ha en enhet som kunde mäta aktiv-, reaktiv- och skenbar effekt, ström, spänning, frekvens och cosϕ på en generator och som kommunicerade vidare dessa värden till en PLC. Detta för att kunna lastfördela lasten mellan ett antal generatorer i kursen Tillämpad elteknik 15 hp där studenterna bygger en generatorinstallation med tre generatorer. Ett funktionsblock för lastfördelning skulle också programmeras. Prototypen som konstruerades baserades på en Arduino Ethernet och kommunikationen löstes med Modbus TCP/IP över Ethernet. Ett lastfördelningsprogram programmerades i form av ett funktionsblock som studenterna kunde importera till CoDeSys v2.3 och använda i sina installationer. Prototypen kunde läsa av värdena med ungefär samma noggrannhet som ett kommersiellt instrument som använder sig av samma mätteknik som prototypen. Uppdateringsfrekvensen var dock lägre än hos ett kommersiellt instrument. Kommunikationen med PLC:n fungerade utan problem. Då ingen undervisning hölls i arbetets slutskede kunde inte lastfördelningen testas på en fullskalig anläggning. Lastfördelningsprogrammet klarade dock av att hålla rätt frekvens på en ensam generator och fungerade som tänkt när programmet testades i en simulator. Prototypen gav fel mätvärden vid kapacitiv last. Vid jämförelse med en kommersiell tångamperemeter visade sig mätfelet bero på mätmetoden då båda gav liknande resultat. Som referens användes en professionell elkvalitetsanalysator. Alla uppdragsgivarens krav blev uppfyllda och arbetet kommer att kunna användas i undervisningen. / This thesis was ordered by Kalmar Maritime Academy. The request was for a device that could measure active, reactive and apparent power, as well as frequency, voltage, current and cosϕ on a generator. The measured values would be communicated to a PLC for use in a load sharing program between a number of generators in the course Tillämpad elteknik, 15 ECTS. In that course the students constructs a three-generator electric power grid. Included in the request was also to program a load sharing program. The prototype being constructed was based on the Arduino Ethernet, and the communication was enabled by means of the Modbus TCP/IP protocol over Ethernet. A load sharing program was created in the form of a function block which the student could import into the CoDeSys for use in the generator systems. The prototype could measure values with close to the same accuracy as a commercial available instrument that were using the same technique for measuring. The refresh rate was however lower than the commercial available instrument. Communication with the PLC worked without any issues. No full-scale testing could be done since no course was held during the final stages of the thesis, however the load sharing program could keep frequency on a single generator alone and worked in a simulated soft environment. Measuring errors occurred when measuring a capacitive load. When comparing to a commercial available clamp meter, the same errors occurred. As a reference a professional power and energy quality analyser was used. All the requests were fulfilled and the result of this thesis will be used in the educational programme at the Academy.