It is going to be evaluated the availability of the MC process, particularly the Sweeping Gas Membrane Distillation (SGMD), to perform the regeneration of ammonium dihydrogen phosphate (ADP) from diammonium phosphate (DAP) and the study of the main parameters to perform the scale up of the process to an industrial level. Making focus on the selection and characterization of suitable membranes for the process and the design-development of SGMD pilot plant and test for the evaluation of the operative parameters. The main requirement for the MC technology application is bank on suitable membranes for the process. This must act as a barrier for one of the phases on contact and should enable the mass transport of volatile components. For operative reasons is preferable to hold back the aqueous phase, making the use of hydrophobic membranes imperative. The hydrophobic membrane character of the membranes is a critical argument for the MC process and is one of the main drawback for the massive application of this technology. Many studies to evaluate the hydrophobic character have been performed and continues to be a trend topic on the MC scenario. However few studies have been done to evaluate the variation of the hydrophobicity with the temperature and none of them to evaluate the effect of temperature above the normal water boiling point.

The increase in energy costs and the demands for products with greater nutritional value and of processing procedures less toxic to the environment are attractive factors for transferring membrane processing to food industry and biotechnology applications. Sugar production is one of the most energy-intensive applications in the food industry, therefore membrane separation processes find many applications, nevertheless some limitation exist for application of membrane processes in the sugar industry. This study focused on Food applications of membrane processes. A critical summary of a wide experimental investigation is reported. In this work, separation performances of commercial polyamide NF membranes are investigated in a wide range of compositions in the feed side at temperatures from 30 to 50°C; aqueous solutions containing monosaccharides, disaccharides, and mixtures of them are studied, and the role of the electrolytes on their rejection is investigated. All the results obtained, have been organized in three main sections: (i) Hydraulic permeability, (ii) experimental investigation as it is, and (iii) Intrinsic membrane performances. Differently from literature, where typically aqueous solutions containing monosaccharides and oligosaccharides are used at low concentrations, at room temperature and only experimental data as it is are reported, a key point of this study is the critical evaluation based on intrinsic membrane performances. The data processing discussed allows to introduce a revised Donnan Steric Pore & Dielectric Exclusion model. The revised model provides useful elements to understand which kind of interactions (complex formation or dehydration) can affect sugars rejections in presence of strong electrolytes, however dehydration effects caused by temperature and electrolyte are the most evident. The revised model is able to predict with good confidence both the temperature effect on membrane performances and rejections in multicomponent mixtures, ranging from laboratory to process/industrial scale.

The object of this PhD work is the study of innovative, composite and nanostructured polymeric materials for membrane-based separation and removal of CO2 from gaseous streams. The research on gas separation membranes, in the last two decades was largely devoted to the synthesis and fabrication of new, multiphasic materials, such as copolymers, composite materials bearing fillers dispersed in the polymeric matrix, or functionalized materials having selective functional groups attached to the polymer backbone. The materials investigated in this thesis can be divided in three classes: copolyetherimides: copolymers formed by a glassy polyimide phase, composite membranes, commonly defined as Mixed Matrix Membranes, functionalized materials obtained by chemically attaching amine moieties to a polymeric backbone for the instauration, in appropriate operative conditions, of the facilitated transport mechanism of CO2. All the above materials have the advantage that their transport properties, in terms of solubility, diffusivity and thus of gas permeability and selectivity, can be tuned and adjusted for the practical purpose. To this end, in this work, an experimental campaign devoted to the measurement of transport properties will be supported by a modeling approach on the continuous scale, for better understanding mass transport properties and the influence of material formulation on them, and develop easily accessible models for the prediction of materials behavior.

Gas separation membranes of high CO2 permeability and selectivity have great potential in both natural gas sweetening and carbon dioxide capture. Many modified PIM membranes results permselectivity above Robinson upper bound. The big problem that should be solved for these polymers to be commercialized is their aging through time. In high glassy polymeric membrane such as PIM-1 and its modifications, solubility selectivity has more contribution towards permselectivity than diffusivity selectivity. So in this thesis work pure and mixed gas sorption behavior of carbon dioxide and methane in three PIM-based membranes (PIM-1, TZPIM-1 and AO-PIM-1) and Polynonene membrane is rigorously studied. Sorption experiment is performed at different temperatures and molar fraction. Sorption isotherms found from the experiment shows that there is a decrease of solubility as the temperature of the experiment increases for both gases in all polymers. There is also a decrease of solubility due to the presence of the other gas in the system in the mixed gas experiments due to competitive sorption effect. Variation of solubility is more visible in methane sorption than carbon dioxide, which will make the mixed gas solubility selectivity higher than that of pure gas solubility selectivity. Modeling of the system using NELF and Dual mode sorption model estimates the experimental results correctly Sorption of gases in heat treated and untreated membranes show that the sorption isotherms don’t vary due to the application of heat treatment for both carbon dioxide and methane. But there is decrease in the diffusivity coefficient and permeability of pure gases due to heat treatment. Both diffusivity coefficient and permeability decreases with increasing of heat treatment temperature. Diffusivity coefficient calculated from transient sorption experiment and steady state permeability experiment is also compared in this thesis work. The results reveal that transient diffusivity coefficient is higher than steady state diffusivity selectivity.

No description available.

Nanofiltration (NF) is a pressure-driven membrane process, intermediate between reverse osmosis and ultrafiltration. Commercially available polymeric membranes have been used in a wide range of applications, such as drinking, process industry and waste water treatment. For all the applications requiring high stability and harsh washing procedures inorganic membranes are preferred due to their high chemical inertia. Typically, γ – Al2O3 as well as TiO2 and ZrO2 selective layers are used; the latter show higher chemical stability in a wide range of pH and temperatures. In this work the experimental characterization of two different type of membrane has been performed in order to investigate permeation properties, separation performance and efficiency with aqueous solutions containing strong inorganic electrolytes. The influence of salt concentration and feed pH as well as the role of concentration polarization and electrolyte type on the membrane behavior are investigated. Experimentation was performed testing a multi–layer structured NF membrane in α-Al2O3, TiO2 and ZrO2, and a polymeric membrane, in polyamide supported on polysulfone, with binary aqueous solutions containing NaCl, Na2SO4 or CaCl2; the effect of salt composition and pH in the feed side was studied both on flux and salt rejection. All the NF experimental data available for the two membranes were used to evaluate the volumetric membrane charge (X) corresponding to each operative conditions investigated, through the Donnan Steric Pore Model and Dielectric Exclusion (DSPM&DE). The results obtained allow to understand which are the main phenomena at the basis of the different behaviors observed.

The work of this thesis has been focused on the characterisation of inorganic membranes for the hydrogen purification from steam reforming gas. Composite membranes based on porous inorganic supports coated with palladium silver alloys and ceramic membranes have been analysed. A brief resume of theoretical laws governing transport of gases through dense and porous inorganic membranes and an overview on different methods to prepare inorganic membranes has been also reported. A description of the experimental apparatus used for the characterisation of gas permeability properties has been reported. The device used permits to evaluate transport properties in a wide range of temperatures (till 500°C) and pressures (till 15 bar). Data obtained from experimental campaigns reveal a good agreement with Sievert law for hydrogen transport through dense palladium based membranes while different transport mechanisms, such as Knudsen diffusion and Hagen-Poiseuille flow, have been observed for porous membranes and for palladium silver alloy ones with pinholes in the metal layer. Mixtures permeation experiments reveal also concentration polarisation phenomena and hydrogen permeability reduction due to carbon monoxide adsorption on metal surface.

The object of the present study is the process of gas transport in nano-sized materials, i.e. systems having structural elements of the order of nanometers. The aim of this work is to advance the understanding of the gas transport mechanism in such materials, for which traditional models are not often suitable, by providing a correct interpretation of the relationship between diffusive phenomena and structural features. This result would allow the development new materials with permeation properties tailored on the specific application, especially in packaging systems. The methods used to achieve this goal were a detailed experimental characterization and different simulation methods. The experimental campaign regarded the determination of oxygen permeability and diffusivity in different sets of organic-inorganic hybrid coatings prepared via sol-gel technique. The polymeric samples coated with these hybrid layers experienced a remarkable enhancement of the barrier properties, which was explained by the strong interconnection at the nano-scale between the organic moiety and silica domains. An analogous characterization was performed on microfibrillated cellulose films, which presented remarkable barrier effect toward oxygen when it is dry, while in the presence of water the performance significantly drops. The very low value of water diffusivity at low activities is also an interesting characteristic which deals with its structural properties. Two different approaches of simulation were then considered: the diffusion of oxygen through polymer-layered silicates was modeled on a continuum scale with a CFD software, while the properties of n-alkanthiolate self assembled monolayers on gold were analyzed from a molecular point of view by means of a molecular dynamics algorithm. Modeling transport properties in layered nanocomposites, resulting from the ordered dispersion of impermeable flakes in a 2-D matrix, allowed the calculation of the enhancement of barrier effect in relation with platelets structural parameters leading to derive a new expression. On this basis, randomly distributed systems were simulated and the results were analyzed to evaluate the different contributions to the overall effect. The study of more realistic three-dimensional geometries revealed a prefect correspondence with the 2-D approximation. A completely different approach was applied to simulate the effect of temperature on the oxygen transport through self assembled monolayers; the structural information obtained from equilibrium MD simulations showed that raising the temperature, makes the monolayer less ordered and consequently less crystalline. This disorder produces a decrease in the barrier free energy and it lowers the overall resistance to oxygen diffusion, making the monolayer more permeable to small molecules.

Fenomeni di trasporto ed elettrostatici in membrane da Nanofiltrazione La capacità di predire le prestazioni delle membrane da nanofiltrazione è molto importante per il progetto e la gestione di processi di separazione a membrana. Tali prestazioni sono strettamente legate ai fenomeni di trasporto che regolano il moto dei soluti all’interno della matrice della membrana. Risulta, quindi, di rilevante importanza la conoscenza e lo studio di questi fenomeni; l’obiettivo finale è quello di mettere a punto modelli di trasporto appropriati che meglio descrivano il flusso dei soluti all’interno della membrana. A fianco dei modelli di trasporto ricopre, quindi, una importanza non secondaria la caratterizzazione dei parametri aggiustabili propri della membrana sulla quale si opera. La procedura di caratterizzazione di membrane deve chiarire le modalità di svolgimento delle prove sperimentali e le finalità che esse dovrebbero conseguire. Tuttavia, nonostante i miglioramenti concernenti la modellazione del trasporto di ioni in membrana ottenuti dalla ricerca negli ultimi anni, si è ancora lontani dall’avere a disposizione un modello univoco in grado di descrivere i fenomeni coinvolti in maniera chiara. Oltretutto, la palese incapacità del modello di non riuscire a prevedere gli andamenti sperimentali di reiezione nella gran parte dei casi relativi a miscele multicomponenti e le difficoltà legate alla convergenza numerica degli algoritmi risolutivi hanno fortemente limitato gli sviluppi del processo anche e soprattutto in termini applicativi. Non da ultimo, si avverte la necessità di poter prevedere ed interpretare l’andamento della carica di membrana al variare delle condizioni operative attraverso lo sviluppo di un modello matematico in grado di descrivere correttamente il meccanismo di formazione della carica. Nel caso di soluzioni elettrolitiche, infatti, è stato riconosciuto che la formazione della carica superficiale è tra i fattori che maggiormente caratterizzano le proprietà di separazione delle membrane. Essa gioca un ruolo importante nei processi di trasporto ed influenza la sua selettività nella separazione di molecole caricate; infatti la carica di membrana interagisce elettrostaticamente con gli ioni ed influenza l’efficienza di separazione degli stessi attraverso la partizione degli elettroliti dalla soluzione esterna all’interno dei pori del materiale. In sostanza, la carica delle membrane da NF è indotta dalle caratteristiche acide delle soluzioni elettrolitiche poste in contatto con la membrana stessa, nonché dal tipo e dalla concentrazione delle specie ioniche. Nello svolgimento di questo lavoro sono stati analizzati i principali fenomeni di trasporto ed elettrostatici coinvolti nel processo di nanofiltrazione, in particolare si è focalizzata l’attenzione sugli aspetti relativi alla loro modellazione matematica. La prima parte della tesi è dedicata con la presentazione del problema generale del trasporto di soluti all’interno di membrane da nanofiltrazione con riferimento alle equazioni alla base del modello DSP&DE, che rappresenta una razionalizzazione dei modelli esistenti sviluppati a partire dal modello DSPM, nel quale sono stati integrarti i fenomeni di esclusione dielettrica, per quanto riguarda la separazione di elettroliti nella filtrazione di soluzioni acquose in processi di Nanofiltrazione. Il modello DSP&DE, una volta definita la tipologia di elettroliti presenti nella soluzione alimentata e la loro concentrazione, viene completamente definito da tre parametri aggiustabili, strettamente riconducibili alle proprietà della singola membrana: il raggio medio dei pori all’interno della matrice, lo spessore effettivo e la densità di carica di membrana; in più può essere considerato un ulteriore parametro aggiustabile del modello il valore che la costante dielettrica del solvente assume quando confinato in pori di ridotte dimensioni. L’impostazione generale del modello DSP&DE, prevede la presentazione dei fenomeni di trasporto all’interno della membrana, descritti attraverso l’equazione di Nerst-Planck, e lo studio della ripartizione a ridosso dell’interfaccia membrana/soluzione esterna, che tiene in conto di diversi contributi: l’impedimento sterico, la non idealità della soluzione, l’effetto Donnan e l’esclusione dielettrica. Il capitolo si chiude con la presentazione di una procedura consigliata per la determinazione dei parametri aggiustabili del modello di trasporto. Il lavoro prosegue con una serie di applicazioni del modello a dati sperimentali ottenuti dalla caratterizzazione di membrane organiche CSM NE70 nel caso di soluzioni contenenti elettroliti. In particolare il modello viene applicato quale strumento atto ad ottenere informazioni utili per lo studio dei fenomeni coinvolti nel meccanismo di formazione della carica; dall’elaborazione dei dati sperimentali di reiezione in funzione del flusso è possibile ottenere dei valori di carica di membrana, assunta quale parametro aggiustabile del modello. che permettono di analizzare con affidabilità gli andamenti qualitativi ottenuti per la carica volumetrica di membrana al variare della concentrazione di sale nella corrente in alimentazione, del tipo di elettrolita studiato e del pH della soluzione. La seconda parte della tesi relativa allo studio ed alla modellazione del meccanismo di formazione della carica. Il punto di partenza di questo studio è rappresentato dai valori di carica ottenuti dall’elaborazione dei dati sperimentali di reiezione con il modello di trasporto, e tali valori verranno considerati quali valori “sperimentali” di riferimento con i quali confrontare i risultati ottenuti. Nella sezione di riferimento è contenuta la presentazione del modello teorico “adsorption-amphoteric” sviluppato al fine di descrivere ed interpretare i diversi comportamenti sperimentali ottenuti per la carica di membrana al variare delle condizioni operative. Nel modello la membrana è schematizzata come un insieme di siti attivi di due specie: il gruppo di siti idrofobici e quello de siti idrofilici, in grado di supportare le cariche derivanti da differenti meccanismi chimici e fisici. I principali fenomeni presi in considerazione nel determinare la carica volumetrica di membrana sono: i) la dissociazione acido/base dei siti idrofilici; ii) il site-binding dei contro-ioni sui siti idrofilici dissociati; iii) l’adsorbimento competitivo degli ioni in soluzione sui gruppi funzionali idrofobici. La struttura del modello è del tutto generale ed è in grado di mettere in evidenza quali sono i fenomeni rilevanti che intervengono nel determinare la carica di membrana; per questo motivo il modello permette di indagare il contributo di ciascun meccanismo considerato, in funzione delle condizioni operative. L’applicazione ai valori di carica disponibili per membrane Desal 5-DK nel caso di soluzioni contenenti singoli elettroliti, in particolare NaCl e CaCl2 permette di mettere in evidenza due aspetti fondamentali del modello: in primis la sua capacità di descrivere andamenti molto diversi tra loro per la carica di membrana facendo riferimento agli stessi tre semplici meccanismi, dall’altra parte permette di studiare l’effetto di ciascun meccanismo sull’andamento della carica totale di membrana e il suo peso relativo. Infine vengono verificate le previsioni ottenute con il modello dal suddetto studio attraverso il confronto con dati sperimentali di carica ottenuti dall’elaborazione dei dati sperimentali di reiezione disponibili per il caso di membrane CSM NE70. Tale confronto ha messo in evidenza le buone capacità previsionali del modello soprattutto nel caso di elettroliti non simmetrici quali CaCl2 e Na2SO4. In particolare nel caso un cui lo ione divalente rappresenta il contro-ione rispetto alla carica propria di membrana, la carica di membrana è caratterizzata da un andamento unimodale (contraddistinto da un estremante) con la concentrazione di sale in alimentazione. Il lavoro viene concluso con l’estensione del modello ADS-AMF al caso di soluzioni multicomponenti: è presentata una regola di mescolamento che permette di ottenere la carica per le soluzioni elettrolitiche multicomponenti a partire dai valori disponibili per i singoli ioni componenti la miscela.

The study of mass transport in polymeric membranes has grown in importance due to its potential application in many processes such as separation of gases and vapors, packaging, controlled drug release. The diffusion of a low molecular weight species in a polymer is often accompanied by other phenomena like swelling, reactions, stresses, that have not been investigated in all their aspects yet. Furthermore, novel materials have been developed that include inorganic fillers, reactive functional groups or ions, that make the scenery even more complicated. The present work focused on the experimental study of systems where the diffusion is accompanied by other processes; suitable models were also developed to describe the particular circumstances in order to understand the underlying concepts and be able to design the performances of the material. The effect of solvent-induced deformation in polymeric films during sorption processes was studied since the dilation, especially in constrained membranes, can cause the development of stresses and therefore early failures of the material. The bending beam technique was used to test the effects of the dilation and the stress induced in the polymer by penetrant diffusion. A model based on the laminate theory was developed that accounts for the swelling and is able to predict the stress that raise in the material. The addition of inorganic fillers affects the transport properties of polymeric films. Mixed matrix membranes based on fluorinated, high free volume matrices show attractive performances for separation purposes but there is a need for deeper investigation of the selectivity properties towards gases and vapors. A new procedure based on the NELF model was tested on the experimental data; it allows to predict solubility of every penetrant on the basis of data for one vapor. The method has proved to be useful also for the determination of the diffusion coefficient and for an estimation of the permeability in the composite materials. Oxygen scavenging systems can overcome lack of barrier properties in common polymers that forbids their application in sensitive applications as food packaging. The final goal of obtaining a membrane almost impermeable to oxygen leads to experimental times out of reach. Hence, a simple model was developed in order to describe the transport of oxygen in a membrane with also reactive groups and analyze the experimental data collected on SBS copolymers that show attractive scavenging capacity. Furthermore, a model for predicting the oxygen barrier behavior of a film formed as a blend of OSP in a common packaging material was built, considering particles capable of reactions with oxygen embedded in a non-reactive matrix. Perfluorosulphonic acid ionomers (PFSI) are capturing attention due to a high thermal and chemical resistance coupled with very peculiar transport properties, that make them appropriate to be used in fuel cells. The possible effect of different formation procedure was studied together with the swelling due to water sorption since both water uptake and dilation can dramatically affect the fuel cells performances. The water diffusion and sorption was studied with a FTIR-ATR spectrometer that can give deeper information on the bonds between water molecules and the sulphonic hydrophilic groups and, therefore, on the microstructure of the hydrated ionomer.