This report collects selected outstanding scientific and technological results obtained within the frame of the European project "FLASiC" (Flash LAmp Supported Deposition of 3C-SiC) but also other work performed in adjacent fields. Goal of the project was the production of large-area epitaxial 3C-SiC layers grown on Si, where in an early stage of SiC deposition the SiC/Si interface is rigorously improved by energetic electromagnetic radiation from purpose-built flash lamp equipment developed at Forschungszentrum Rossendorf. Background of this work is the challenging task for areas like microelectronics, biotechnology, or biomedicine to meet the growing demands for high-quality electronic sensors to work at high temperatures and under extreme environmental conditions. First results in continuation of the project work – for example, the deposition of the topical semiconductor material zinc oxide (ZnO) on epitaxial 3C-SiC/Si layers – are reported too.

Multiferroic materials exhibit unique properties such as simultaneous existence of two or more of coupled ferroic order parameters (ferromagnetism, ferroelectricity, ferroelasticity or their anti-ferroic counterparts) in a single material. Recent years have seen a huge research interest in multiferroic materials for their potential application as high density non-volatile memory devices. However, the scarcity of these materials in single phase and the weak coupling of their ferroic components have directed the research towards multiferroic heterostructures. These systems operate by coupling the magnetic and electric properties of two materials, generally a ferromagnetic material and a ferroelectric material via strain. In this work, horizontal heterostructures of composite multiferroic materials were grown and characterized using pulsed laser ablation technique. Alternate magnetic and ferroelectric layers of cobalt ferrite and lead zirconium titanate, respectively, were fabricated and the coupling effect was studied by X-ray stress analysis. It was observed that the interfacial stress played an important role in the coupling effect between the phases. Doped zinc oxide (ZnO) heterostructures were also studied where the ferromagnetic phase was a layer of manganese doped ZnO and the ferroelectric phase was a layer of vanadium doped ZnO. For the first time, a clear evidence of possible room temperature magneto-elastic coupling was observed in these heterostructures. This work provides new insight into the stress mediated coupling mechanisms in composite multiferroics.

No description available.

No description available.

No description available.

Die vorliegende Arbeit präsentiert die ersten detaillierten Untersuchungen des Spin-Reorientierungs-Übergangs in epitaktischen NdCo5-Schichten. Die Proben, die mit gepulster Laserdeposition hergestellt wurden, konnten sowohl als in-plane- als auch als out-of-plane-texturierte Schichten präpariert werden. Für beide Wachstumsvarianten ergaben Röntgendiffraktometrie- und Texturmessungen eine sehr gute Texturierung mit einer nahezu einheitlichen Orientierung der c-Achse, die eine Untersuchung der magnetischen Eigenschaften entlang ausgewählter kristallografischer Richtungen ermöglichte. Die globalen Magnetisierungsmessungen der In-plane-Proben zeigten einen Spin-Reorientierungs-Übergang von einer magnetisch leichten c-Achse für Temperaturen oberhalb von 310 K über einen magnetisch leichten Kegel hin zu einer magnetisch leichten Ebene (a-Achse) unterhalb von 255 K. Die Übergangstemperaturen liegen damit geringfügig über den bisher an Massivproben gemessenen Werten. Aus den magnetischen Hysteresemessungen wurden die magnetokristallinen Anisotropiekonstanten erster und zweiter Ordnung für den Temperaturbereich der magnetisch leichten c-Achse und der magnetisch leichten Ebene ermittelt. Die Untersuchungen der Out-of-plane-Proben wiesen die Existenz einer magnetokristallinen Anisotropie höherer als zweiter Ordnung nach. Sie bewirkt ein unterschiedliches Schaltverhalten der parallel zur a- bzw. b-Achse gemessenen magnetischen Hysteresekurven im Temperaturregime der magnetisch leichten Ebene. Für die in-plane-texturierten Schichten wurde das Domänenmuster und dessen Änderung mit der Temperatur im gesamten Spin-Reorientierungs-Bereich analysiert. Diese Untersuchungen basieren auf in Kooperation mit der Universität Hamburg durchgeführten SEMPA-Messungen. Oberhalb von 318 K liegt eine Zweidomänenkonfiguration mit einer Ausrichtung der Magnetisierung parallel zur c-Achse vor, die beim Abkühlen in das Regime des magnetisch leichten Kegels in einen Vierdomänenzustand übergeht. Unterhalb von 252 K bildet sich eine Zweidomänenkonfiguration mit parallel zur a-Achse orientierter Magnetisierung. Diese lokalen Messungen bestätigten den Spin-Reorientierungs-Übergang mit zu den globalen Magnetisierungsmessungen vergleichbaren Übergangstemperaturen. Für charakteristisch orientierte Domänenwände erfolgten genauere Analysen der Magnetisierungsprozesse in den angrenzenden Domänen. Um ein erweitertes Verständnis der Domänenkonfiguration, deren Temperaturabhängigkeit und der vorhandenen Domänenwände zu erarbeiten, erfolgten mikromagnetische Simulationsrechnungen für ausgewählte Temperaturen. Die Berechnungen wurden sowohl für homogene Systeme als auch für Geometrien mit verschiedenen Pinningzentren durchgeführt. Die Analyse der Domänenwände ergab, dass ihr Bloch- oder Néel-Charakter und die Domänenwandweite von der Temperatur sowie ihrer Ausrichtung parallel zur c- oder a-Achse abhängt. / This thesis presents the first detailed investigation of the spin-reorientation-transition in epitaxial NdCo5 thin films. The samples were prepared by pulsed laser deposition as in-plane or out-of-plane textured films. For both kinds of samples X-ray diffraction and texture measurements revealed a high degree of texture with one common orientation of the c-axis within the film, which allowed an investigation of the magnetic properties along distinct crystallographic directions. Global magnetization measurements of the in-plane textured films showed a spin-reorientation from a magnetic easy axis (c-axis) at temperatures above 310 K via a magnetic easy cone to a magnetic easy plane (a-axis) at temperatures below 255 K. The transition temperatures are slightly higher than values reported for bulk samples. The magnetocrystalline anisotropy constants of first and second order were determined for the regime of the magnetic easy axis and plane. Measurements of the out-of-plane textured films verified the existence of a magnetocrystalline anisotropy of order larger than two, which becomes obvious from a different magnetic switching behavior along the a- and b-axis in the temperature regime of the magnetic easy plane. The domain structure and its changes with temperature were investigated for the in-plane textured films. There exists a two domain state at temperatures above 318 K with an orientation of the magnetization parallel to the c-axis from which a four domain state evolves when cooling down the sample to the easy cone state. Finally, a two domain state exists in the regime of the magnetic easy plane (easy a-axis) with an orientation of the magnetization parallel to the a-axis at temperatures below 252 K. The local measurements confirm the spin-reorientation-transition with transition temperatures comparable to those derived from global magnetization measurements. In addition, a detailed analysis of the magnetization processes for some characteristically oriented domain walls was performed. Micromagnetic simulations were carried out for selected temperatures to achieve a deeper understanding of the temperature dependence of the domain configuration and of the domain walls. The simulations considered homogeneous systems as well as systems with pinning centers. An analysis of the domain walls showed that their character and width depend on temperature and the orientation parallel to the a- or c-axis.

Dans la perspective du développement de vitrages électrochromes « en milieu protonique », des films minces électrochromes à coloration anodique, à base d’oxyde de nickel, ont été synthétisés et caractérisés. Afin d’améliorer la durabilité des films minces à base de NiO, trois approches ont été envisagées. (i)Des films d’oxyde de nickel et d’oxyde mixte nickel/lithium, déposés par PLD (Pulsed Laser Deposition). Nous avons étudié l’influence du lithium sur les propriétés physico-chimiques (‘amorphisation..), et les caractéristiques électrochromes (électrochimique-optique) en milieu aqueux KOH 1M. (ii) Des films composites, préparés par voie chimique (solution), constitués d’une phase amorphe (en diffraction des Rayons X), de composition Ti1-xZnxO2-x?x, englobant des cristallites de NiO de ~ 5 nm de diamètre. Les courbes voltampérométriques révèlent que seule la phase NiO est électrochimiquement active, mais la phase amorphe, grâce aux lacunes anioniques neutres, ?x, renforce la tenue mécanique des films déposés sur les substrats FTO/verre. Il s’ensuit que ces films composites sont plus stables au cyclage, en milieu aqueux KOH 1M, que leurs homologues TiO2/NiO. (iii) Des films minces d’oxyde de nickel dopés par du carbone, préparés par une voie sol-gel originale, présentant une remarquable tenue en cyclage (> 25000 cycles en milieu aqueux KOH 1M), jamais observée jusqu’ici pour NiO. / Aiming at enhancing the electrochromic properties of NiO thin films, deposited on FTO substrates, we have employed three different approaches. They deal with: 1) lithium doping of NiO, the corresponding thin film-deposition method is PLD (Pulsed Laser Deposition); 2) NiO nanoparticles embedded into zinc doped amorphous titanium oxide matrix, a solution method is used to deposit the corresponding thin films ; 3) Carbon-doped NiO thin films deposited using, a specific sol-gel method. Owing to lithium doping of NiO, we could induce film amorphization, thereby enhancing the film electrochemical-capacity. Most importantly, the adhesion between the film and the FTO substrate was improved leading to enhanced electrochemical cyclability in aqueous KOH electrolyte. We could enhance the electrochromic performances of TiO2/NiO composite thin films by doping TiO2 with Zn2+, forming to a new composite thin film Ti1-xZnxO2-x?x-NiO. Finally we have successfully stabilized the electrochromic properties (durability and optical property) of NiO thin films in aqueous KOH electrolyte, owing to the development of a specific sol-gel method leading to carbon-doped NiO nanoparticles. For the first time 25000 cycles were successfully achieved without significant decrease of the electrochromic performances.

Technologies laser pour l’élaboration de matériaux carbonés pour microsystèmes analytiques environnementaux. Pas de résumé en français fourni / Amorphous carbon nitride (a-CzN) material has attractor much attention in research and development. Recently, it has become a more promising electrode material than conventional carbon based electrodes in electrochemical and biosensor applications. Nitrogen containing amorphous carbon (a-C:N) thin films have been synthesized by femtosecond pulsed laser deposition (fs-PLD) coupled with plasma assistance through Direct Current (DC) bias power supply. During the deposition process, various nitrogen pressures (0 to 50 Pa) and DC bias (0 to -350 V) were used in order to explore a wide range of nitrogen content into the film. The structure and chemical composition of the films have been studied by using Multi-wavelength (MW) Roman spectroscopy, electron energy-loss spectroscopy (EELS), X-ray photoelectron spectroscopy (XPS) and high-resolution transmission electron microscopy (HRTBM). The surface morphology has been studied by Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM). Increasing the nitrogen pressure or adding a DC bias induced an increase of the N content, up to 28 at.%. Nitrogen content increase induces a higher sp2 character of the film. However DC bias has been found to increase the film structmal disorder, which was detrimental to the electrochemical properties. Indeed the electrochemical measurern-ts, investigated by cyclic voltammetry (CV), demonstrated that the a-CzNfilms show better electron transfer kinetics, reversibility and excellent reproducibility than the pure a-C films. Electrochemical grafting from diazoniurn salts was successfully achieved on this film, with a surface coverage of covalently bonded molecules close to the dense packed monolayer of ferrocene

Le but de ce travail de thèse est de réaliser des vannes de spin « naturelles » constituées d’un matériau unique. Le matériau en question doit contenir une alternance de feuillets magnétiques et non magnétiques et présenter différents états magnétiques. Ce système modèle ne présenterait alors ni d’inter diffusion ni de rugosité aux interfaces magnétiques/non-magnétiques et pourrait constituer un système modèle pour les études des phénomènes de transport dépendant de spin. Le CoV2O6 est un oxyde polymorphe de basse dimensionnalité. Les deux phases (α et γ) présentent chacune plusieurs plateaux d’aimantation induits par un champ magnétique. Le premier objectif est de comprendre la structure cristalline et magnétique de ce composé, ce qui a été réalisé par des mesures d’aimantation, de diffraction des rayons X et de neutrons sur des poudres et monocristaux. Les résultats de la phase α sont appuyés par des calculs ab initio. Le second objectif est de déposer ce matériau en couche mince afin d’analyser ses propriétés de transport. Des films épitaxiés de γ CoV2O6 ont été obtenus sur TiO2(100) et TiO2/Pt(111) par ablation laser. Le dépôt sur l’électrode de Pt montre la présence de six variants entrainant l’observation de plateaux d’aimantation supplémentaires. / The purpose of this work is to synthesize “natural” spin valves within one unique material. The material needs a crystalline structure formed by stacking magnetic and non-magnetic sheets as well as different magnetic states. Such model system could be used for the study of spin dependent transport properties as no-roughness or diffusion at the magnetic/non-magnetic interfaces is allowed. The polymorph low-dimensional oxide CoV2O6 is such a material. Both phases (α and γ) exhibit field induced magnetization plateaus. This study’s first aim is to understand crystalline and magnetic structures. Investigations were performed on powders and single crystals using magnetization measurements as well as X-ray and neutron diffraction measurements. The magnetic properties of α CoV2O6 were supported by ab initio calculations. The second aim is to grow CoV2O6 thin films in order to analyze further the transport properties. Epitaxial γ CoV2O6 thin films were obtained by pulsed laser ablation on both TiO2(100) and TiO2/Pt(111) substrates. Films grown on Pt electrode exhibit six variants which allows observing additional magnetization plateaus.

Sonder la matière en utilisant des nanoparticules luminescentes nécessite une compréhension de chaque processus pouvant modifier leurs propriétés optiques. Cette thèse se focalise sur l'influence de l'environnement diélectrique sur la luminescence de deux types de nanoobjets : (i) des boites quantiques colloïdales (QDs), et (ii) des nanobâtonnets d'or. L'objectif est d'évaluer les potentialités de ces nanostructures comme sondes locales de l'environnement diélectrique.L'évolution de la dynamique de relaxation de QDs dans différents environnements diélectriques est interprétée en terme d'indice de réfraction effectif local. Cette étude montre qu'une analyse détaillée de la sensibilité des QDs à l'environnement permet de les utiliser comme nanosondes biologiques d'indice de réfraction. Nous présentons également une nouvelle méthode pour l'encapsulation de QDs en matrice diélectrique solide, à travers le dépôt par laser pulsé. Les émetteurs peuvent être protégés par des films minces et subir des perturbations non-destructives et réversibles de leur environnement proche, à l'échelle de la particule unique, tout en analysant la dynamique de fluorescence. Finalement, la sensibilité de la résonance plasmon de nanobâtonnets d'or à l'approche d'une interface diélectrique est également sondée, puis comparée a celle des boites quantiques / Probing systems using luminescent nanoparticles requires the understanding of all the processes that influence the luminescence properties. This thesis focuses on the influence of the dielectric environment on the luminescence of two types of nanoparticles : (i) colloidal quantum dots (QDs), and (ii) gold nanorods. The aim of this work is to evaluate the potential of these nanostructures to act as local probes of the dielectric environment. The evolution of the relaxation dynamics of QDs in various dielectric media is interpreted in terms of local effective refractive index. This work shows that a detailed analysis of the sensitivity of the QDs to the environment allows their use as biological nanoprobes of refractive index. We furthermore present a new method for the encapsulation of QDs in a solid dielectric matrix, using pulsed laser deposition. The emitters can be incorporated in thin films and their local environment can be modified in a reversible and non-destructive way, while the emission dynamics is investigated at the single emitter level. Finally, the sensitivity of the surface plasmon resonance of gold nanorods to an approching dielectric interface is also studied, and compared to the one found for QDs