201 |
MODÈLES STOCHASTIQUES INTERAGISSANTS : SYNCHRONISATION ET RÉDUCTION À UN SYSTÈME DE PHASESPoquet, Christophe 08 October 2013 (has links) (PDF)
Le sujet de cette thèse est l'étude du rôle du bruit dans les systèmes interagissants, avec en vue des applications dans les systèmes biologiques. Cette étude est basée sur le modèle de Kuramoto, qui est un modèle d'oscillateurs uni-dimensionnels interagissants admettant une transition de phase de synchronisation, ainsi que sur certaines de ses généralisations. Une première partie (réalisée en collaboration avec G. Giacomin, K. Pakdaman et X. Pellegrin) est consacrée au modèle des "Active Rotators", une généralisation du modèle de Kuramoto, dans lequel chaque oscillateur a une dynamique propre, qui est peut être choisie excitable. Nous démontrons de manière rigoureuse que le système global peut avoir une dynamique très différente de celle d'un oscillateur isolé, en réduisant le problème à un problème de phase. On peut en particulier voir l'apparition de phénomènes périodiques. La deuxième partie (réalisée en collaboration avec G. Giacomin et E. Luçon) est consacrée à l'étude du modèle de Kuramoto bruité, dans la limite du faible désordre. Nous démontrons en particulier, dans le cas où le désordre n'est pas symétrique, l'existence d'une solution périodique et donnons un développement de sa vitesse. La troisième partie (réalisée en collaboration avec G. Giacomin et L. Bertini) est consacrée au comportement du modèle de Kuramoto en temps long (proportionnel au nombre d'oscillateurs): les oscillateurs conservent un profil synchronisé qui se déplace dans la limite d'une infinité d'oscillateurs suivant un mouvement Brownien. Enfin dans la dernière partie je me suis intéressé à la problématique de réduction de phase dans le cas du problème de sortie de potentiel, pour des modèle proches de la réversibilité.
|
202 |
Synchronisationsphänomene myotendinöser Oszillationen interagierender neuromuskulärer Systeme : mit Betrachtung einer Hypothese bezüglich unterschiedlicher Qualitäten isometrischer Muskelaktion / Synchronization phenomena of myotendinal oscillations during interaction of neuromuscular systems : considering a hypothesis regarding different qualities of isometric muscle actionSchaefer, Laura January 2014 (has links)
Muskeln oszillieren nachgewiesener Weise mit einer Frequenz um 10 Hz. Doch was geschieht mit myofaszialen Oszillationen, wenn zwei neuromuskuläre Systeme interagieren? Die Dissertation widmet sich dieser Fragestellung bei isometrischer Interaktion. Während der Testmessungen ergaben sich Hinweise für das Vorhandensein von möglicherweise zwei verschiedenen Formen der Isometrie. Arbeiten zwei Personen isometrisch gegeneinander, können subjektiv zwei Modi eingenommen werden: man kann entweder isometrisch halten – der Kraft des Partners widerstehen – oder isometrisch drücken – gegen den isometrischen Widerstand des Partners arbeiten. Daher wurde zusätzlich zu den Messungen zur Interaktion zweier Personen an einzelnen Individuen geprüft, ob möglicherweise zwei Formen der Isometrie existieren.
Die Promotion besteht demnach aus zwei inhaltlich und methodisch getrennten Teilen: I „Single-Isometrie“ und II „Paar-Isometrie“. Für Teil I wurden mithilfe eines pneumatisch betriebenen Systems die hypothetischen Messmodi Halten und Drücken während isometrischer Aktion untersucht. Bei n = 10 Probanden erfolgte parallel zur Aufzeichnung des Drucksignals während der Messungen die Erfassung der Kraft (DMS) und der Beschleunigung sowie die Aufnahme der mechanischen Muskeloszillationen folgender myotendinöser Strukturen via Mechanomyo- (MMG) bzw. Mechanotendografie (MTG): M. triceps brachii (MMGtri), Trizepssehne (MTGtri), M. obliquus externus abdominis (MMGobl). Pro Proband wurden bei 80 % der MVC sowohl sechs 15-Sekunden-Messungen (jeweils drei im haltenden bzw. drückenden Modus; Pause: 1 Minute) als auch vier Ermüdungsmessungen (jeweils zwei im haltenden bzw. drückenden Modus; Pause: 2 Minuten) durchgeführt.
Zum Vergleich der Messmodi Halten und Drücken wurden die Amplituden der myofaszialen Oszillationen sowie die Kraftausdauer herangezogen. Signifikante Unterschiede zwischen dem haltenden und dem drückenden Modus zeigten sich insbesondere im Bereich der Ermüdungscharakteristik. So lassen Probanden im haltenden Modus signifikant früher nach als im drückenden Modus (t(9) = 3,716; p = .005). Im drückenden Modus macht das längste isometrische Plateau durchschnittlich 59,4 % der Gesamtdauer aus, im haltenden sind es 31,6 % (t(19) = 5,265, p = .000). Die Amplituden der Single-Isometrie-Messungen unterscheiden sich nicht signifikant. Allerdings variieren die Amplituden des MMGobl zwischen den Messungen im drückenden Modus signifikant stärker als im haltenden Modus. Aufgrund dieser teils signifikanten Unterschiede zwischen den beiden Messmodi wurde dieses Setting auch im zweiten Teil „Paar-Isometrie“ berücksichtigt.
Dort wurden n = 20 Probanden – eingeteilt in zehn gleichgeschlechtliche Paare – während isometrischer Interaktion untersucht. Die Sensorplatzierung erfolgte analog zu Teil I. Die Oszillationen der erfassten MTG- sowie MMG-Signale wurden u.a. mit Algorithmen der Nichtlinearen Dynamik auf ihre Kohärenz hin untersucht.
Durch die Paar-Isometrie-Messungen zeigte sich, dass die Muskeln und die Sehnen beider neuromuskulärer Systeme bei Interaktion im bekannten Frequenzbereich von 10 Hz oszillieren. Außerdem waren sie in der Lage, sich bei Interaktion so aufeinander abzustimmen, dass sich eine signifikante Kohärenz entwickelte, die sich von Zufallspaarungen signifikant unterscheidet (Patchanzahl: t(29) = 3,477; p = .002; Summe der 4 längsten Patches: t(29) = 7,505; p = .000). Es wird der Schluss gezogen, dass neuromuskuläre Komplementärpartner in der Lage sind, sich im Sinne kohärenten Verhaltens zu synchronisieren.
Bezüglich der Parameter zur Untersuchung der möglicherweise vorhandenen zwei Formen der Isometrie zeigte sich bei den Paar-Isometrie-Messungen zwischen Halten und Drücken ein signifikanter Unterschied bei der Ermüdungscharakteristik sowie bezüglich der Amplitude der MMGobl.
Die Ergebnisse beider Teilstudien bestärken die Hypothese, dass zwei Formen der Isometrie existieren. Fraglich ist, ob man überhaupt von Isometrie sprechen kann, da jede isometrische Muskelaktion aus feinen Oszillationen besteht, die eine per Definition postulierte Isometrie ausschließen. Es wird der Vorschlag unterbreitet, die Isometrie durch den Begriff der Homöometrie auszutauschen.
Die Ergebnisse der Paar-Isometrie-Messungen zeigen u.a., dass neuromuskuläre Systeme in der Lage sind, ihre myotendinösen Oszillationen so aufeinander abzustimmen, dass kohärentes Verhalten entsteht. Es wird angenommen, dass hierzu beide neuromuskulären Systeme funktionell intakt sein müssen. Das Verfahren könnte für die Diagnostik funktioneller Störungen relevant werden. / Muscles oscillate with a frequency of about 10 Hz. But what happens with myofascial oscillations if two neuromuscular systems interact? The dissertation is devoted to this question during isometric interaction. The test measurements provide hints for the presence of possibly two different forms of isometric muscle action. When two persons work against each other, each individual can subjectively choose to take up one of two modes: one can either hold isometrically – thus resist the force of the partner – or one can push isometrically – and therefore work against the resistance of the partner. In addition to the measurements to determine the interaction of neuromuscular systems, measurements with single individuals were done to evaluate the question, if probably two forms of isometric muscle action exist.
The doctoral thesis consists of two separate parts concerning the content and methodology: I “Single Isometric” and II “Coupled Isometric”. For part I the hypothetical measurement modes - “holding” and “pushing” during isometric muscle action - were examined using a pneumatic system. During the measurements of n = 10 subjects the signal of pressure, force (strain gauge) and acceleration were recorded. Furthermore, the detection of the mechanic muscle oscillations of the following myotendinal structures occurred via Mechanomyo- (MMG) and Mechanotendography (MTG), respectively: triceps brachii muscle (MMGtri), tendon of triceps brachii muscle (MTGtri) and obliquus externus abdominis muscle (MMGobl). Each test person performed at 80 % of MVC six 15-seconds-measurements (three at holding and three at pushing mode, respectively; break: 1 min.) as well as four fatigue measurements (two at holding and two at pushing mode, respectively; break: 2 min.).
In order to compare the two measurement modes holding and pushing, the amplitude of the myofascial oscillations as well as the force endurance were used. Significant differences between the holding and the pushing mode appeared especially when looking at the characteristics of fatigue. Subjects in the holding mode yielded earlier than during the pushing one (t(9) = 3.716; p = .005). In the pushing mode the longest isometric plateau amounts 59.4 % of the overall duration of the measurement. During holding it lasted 31.6 % (t(19) = 5.265, p = .000). The amplitudes of the single-isometric-measurements did not differ significantly. But the amplitude of the MMGobl varied significantly stronger during the pushing mode comparing to the holding one. Due to these partly significant differences between both measurement modes, this setting was considered for the second part „Coupled-Isometric“, too.
For the coupled-isometric-measurements n = 20 subjects – divided into same-sex couples – were investigated during isometric interaction. The placement of the sensors is analogous to part I. The oscillations of the recorded MMG- and MTG-signals were analyzed regarding their coherence inter alia by algorithms of non-linear dynamics.
Through the coupled-isometric-measurements it was shown, that also during isometric interaction the muscles and the tendons of both neuromuscular systems oscillate at the known frequency range of 10 Hz. Moreover, the systems are able to coordinate them in such a manner, that a significant coherence appears. This differed significantly from random pairings (number of patches: t(29) = 3.477; p = .002; Sum of 4 longest patches: t(29) = 7.505; p = .000). Thus it is concluded that neuromuscular complementary partners are able to synchronize themselves in the sense of coherent behavior.
Regarding the parameters concerning the possibly existing forms of isometric muscle action, a significant difference at the coupled-isometric-measurements between holding and pushing appeared with respect to the characteristics of fatigue as well as the amplitudes of the MMGobl.
The results of both sub studies strengthen the hypothesis that two forms of isometric muscle action exist. It is questionable whether one can talk of isometry at all, since each isometric muscle action consists of fine oscillations. This excludes a by definition postulated isometry. It is proposed to exchange this term with homeometry.
The results of the coupled-isometric-measurements show inter alia, that neuromuscular systems are able to coordinate their myotendinal oscillations, so that coherent behavior arises. It is supposed that for this both systems have to be functionally intact. This procedure could become relevant for diagnostics of functional disorders.
|
203 |
Synchronisation d'un oscillateur à transfert de spin à une source de courant RF : mécanismes et caractérisation à température ambiante / Synchronization of a Spin Transfer oscillator to a RF current : mechanisms and room-temperature characterization.Dieudonné, Christophe 06 July 2015 (has links)
Les oscillateurs à transfert de spin (STO) sont des oscillateurs nanométriques (~100nm) prometteurs pour les applications radiofréquence. Ils reposent sur la précession de l'aimantation d'une couche magnétique mince induite par transfert de spin (STT). Un dispositif STO basé sur jonction tunnel magnétique (MTJ) fournira typiquement un signal électrique de l'ordre d'une dizaine de GHz et d'une puissance de plusieurs nW. Comparés aux oscillateurs contrôlés en tension (VCO) utilisés actuellement pour la génération de microondes, les STO ont l'avantage d'être hautement accordables en fréquence. Malgré cela, les critères requis en termes de qualité de signal ne sont pas encore remplis par les STO pour être compétitifs.Deux approches existent pour améliorer la qualité du signal de sortie : (i) optimisation de l'empilement magnétique d'un dispositif STO unique et (ii) synchronisation de plusieurs STOs. C'est la deuxième approche qui a été retenue dans le cadre de cette thèse : ici nous nous intéressons à la synchronisation électrique d'un STO à une source de courant RF stabilisée, dit « injection-locking ». Le cas d'un STO à aimantation homogène, de type précession dans le plan (IPP) est étudié.En particulier, la synchronisation d'un STO à 2f, c'est-à-dire lorsque la fréquence du courant injecté est proche du double de la fréquence de génération du STO, est favorisée par rapport à la synchronisation à f. Les résultats expérimentaux obtenus par plusieurs groupes montrent à la fois une gamme de synchronisation et une réduction de largeur de raie plus prononcées à 2f qu'à f.Ce comportement singulier est examiné dans un premier temps par une étude analytique de la dynamique de l'aimantation couplée aux simulations numériques macrospin dans le but d'identifier les mécanismes de synchronisation qui prennent effet au sein du système.En effet, les modèles actuels (formalisme auto-oscillateur KTS) décrivent la synchronisation d'un STO à un courant RF sans faire de distinction entre la synchronisation à f et 2f, et les prédictions qui en découlent s'avèrent être insuffisantes pour la synchronisation à 2f. Pour combler à cela, nous mettons en évidence par extension du formalisme existant les clés du processus de synchronisation à 2f : l'ajustement de fréquence par ajustement de l'amplitude d'oscillation via la non-linéarité, ainsi que la modification du terme d'anti-damping se faisant par l'intermédiaire de la différence de phase.La caractérisation expérimentale du régime synchronisé pour un STO basé sur jonction tunnel magnétique est également détaillée dans le manuscrit. Grâce aux techniques de mesures en domaine temporel et fréquentiel développées spécialement, les grandeurs caractéristiques (gamme de synchronisation et différence de phase) du système sont extraites et comparées aux prédictions théoriques. Enfin, les effets de l'injection du courant RF sur la cohérence du signal de sortie sont discutés. / Spin transfer oscillators (STOs) are promising nanometer scaled oscillators (~100nm) for radiofrequency applications. They rely on the steady precession of the magnetization of a thin magnetic layer induced by spin-transfer torque (STT). A STO device based on a magnetic tunnel junction (MTJ) will typically generate an electrical signal with a frequency of the order of ten GHz and an output power of several nW. Compared to voltage controlled oscillators (VCO) used today for microwave generation, STOs have the advantage of having an important frequency tunability with current. However, criteria in terms of the quality of the output signal are not yet fulfilled for STO to be competitive.To enhance the STO signal properties, two suggestions are proposed: (i) optimization of the magnetic stack within a single STO device and (ii) synchronization of several STOs. The second approach was examined during this thesis: here we look at the electrical synchronization of a STO to a stabilized RF current source, or “injection-locking”. The case of a STO with homogenous magnetization of in-plane precession (IPP) type is investigated.Interestingly, synchronization of a STO at 2f, i.e. when the frequency of the injected current is close to twice the generation frequency of the STO, is favored compared to synchronization at f. The experimental results from several groups have shown both enhanced synchronization range and a more pronounced linewidth reduction at 2f.This singular behavior is examined first through an analytical study of magnetization dynamics along with numerical macrospin simulations, in order to identify synchronization mechanisms taking effect in the system.Indeed, current models (in particular the KTS auto-oscillator formalism) describe synchronization of a STO with making a clear distinction between synchronization at f and 2f, and the resulting predictions turn out to be insufficient at 2f. Here, by extension of the KTS formalism, the keys to the synchronization process at 2f are presented: frequency adjustment by adjustment of the oscillation amplitude via the STO non-linearity and modification of the anti-damping term through the phase-difference.The experimental characterization of the synchronized regime in a MTJ-based STO is also detailed in the manuscript. Utilizing experimental signal processing techniques in both frequency and temporal domain, we extract characteristic quantities for synchronization such as the locking-range and the phase-difference, and we compare these quantities with the analytical predictions. Finally, the effects of current injection on the coherence of the output signal are also discussed.
|
204 |
Beat deafness: développement d'un outil de dépistage et nouveaux casTranchant, Pauline 08 1900 (has links)
No description available.
|
205 |
Facial Modelling and animation trends in the new millennium : a surveyRadovan, Mauricio 11 1900 (has links)
M.Sc (Computer Science) / Facial modelling and animation is considered one of the most challenging areas in the animation
world. Since Parke and Waters’s (1996) comprehensive book, no major work encompassing the entire
field of facial animation has been published. This thesis covers Parke and Waters’s work, while also
providing a survey of the developments in the field since 1996. The thesis describes, analyses, and
compares (where applicable) the existing techniques and practices used to produce the facial
animation. Where applicable, the related techniques are grouped in the same chapter and described in
a chronological fashion, outlining their differences, as well as their advantages and disadvantages.
The thesis is concluded by exploratory work towards a talking head for Northern Sotho. Facial
animation and lip synchronisation of a fragment of Northern Sotho is done by using software tools
primarily designed for English. / Computing
|
206 |
Problème de tournées de véhicules avec contraintes de synchronisation dans le cadre de structures de maintien à domicile. Formalisation mathématique et hybridation à base de métaheuristique / Vehicle routing problem with synchronization constraints in home care support services - Mathematical formulation and hybridization based on metaheuristicsGayraud, Fabrice 13 July 2015 (has links)
Nous nous sommes intéressés à la problématique d’organisation des tournées de soins à domicile dans le cadre de structures de maintien à domicile comme par exemple les service d’Hospitalisation À Domicile ou les Services de Soins Infirmiers À Domicile. Les soins sont prodigués au domicile des patients par un ou deux soignants d’un type défini, comme médecin ou infirmier par exemple pendant une période de disponibilité du patient. Le patient est caractérisé par un niveau de dépendance et peut exprimer une préférence pour être soigné par un soignant plutôt qu’un autre. L’objectif est de construire les tournées des soignants en rendant visite à tous les patients tout en minimisant la longueur (ou durée) des tournées, en équilibrant les tournées suivant le niveau de dépendance des patients et en favorisant la préférence des patients. Après avoir réalisé un état de l’art des problèmes d’organisation de tournées de soins à domicile, nous proposons deux modélisations mathématiques de notre problème sous la forme d’un multiple Traveling Salesman Problem avec fenêtres de temps (m-TSPTW) auquel s’ajoute des contraintes spécifiques comme la synchronisation d’activités ou la prise en compte de types de ressource et des critères de performance propres au problème (équilibrage et préférence). Nous avons ensuite proposé des méthodes approchées basées sur des couplages métaheuristique - modèle de simulation testées sur des instances de la littérature d’un problème proche du nôtre et des instances adaptées à notre problème. Pour terminer, nous abordons trois perspectives de recherche :- la réorganisation des tournées suite à l’absence d’un soignant,- la prise en compte de temps de transport stochastique,- la localisation de structures de maintien à domicile et l’impact sur la construction des tournées. / We are interested in a routing problem within the context of home health care. The cares are provided by one or two caregivers with the required type at the patient’s home during the patients’ availability. A type is doctor or nurse for instance. Each patient is characterized by a dependency level and may give a preference for a caregiver. The goal is to construct the tour for each caregiver visiting all patients, minimizing the length of the tours, balancing the workload of the caregivers and maximizing the satisfaction of the patients. We present a state of the art of the home health care problem. Then we propose two mathematical models of our problem based on the multiple Traveling Salesman Problem with Time Windows (m-TSPTW) with specific constraints like the activities’s synchronization or ressources’ type. The performance criteria are specific of our problem : workload balancing and patients’ satisfaction. We then propose approached methods based on combination between Metaheuristics and simulation model. This méthods have been tested on dataset from the literature and dataset adapted to our problem. We conclude with three research perspectives :- the reorganization of the tours when a caregiver is not available,- the integration of stochastic transport time,- the location of home support structure and its impact on the routes’ construction.
|
207 |
Inseminação artificial em tempo fixo em leitoas e porcas desmamadas com o uso de hormonio luteinizante suíno através de diferentes vias de aplicaçãoUlguim, Rafael da Rosa January 2014 (has links)
A redução do número de doses inseminantes por fêmea coberta utilizando protocolos de uma única inseminação em tempo fixo (IATF) permitem reduzir o número de células espermáticas por fêmea coberta e otimizar os programas de inseminação artificial (IA). Considerando a grande variabilidade no intervalo entre o início do estro e a ovulação, os protocolos de IATF exigem hormonios para a sincronização da ovulação. Assim, o objetivo deste estudo foi avaliar a utilização de diferentes dosagens de hormônio luteinizante suíno (pLH) aplicado no início do estro em leitoas e porcas, através de diferentes vias de aplicação, para sincronização da ovulação e definição de um protocolo de IATF. O primeiro estudo avaliou o efeito de diferentes dosagens de pLH aplicado em leitoas no início do estro por via intramuscular (i.m.), sobre o intervalo início estro e a ovulação. Desta forma foram realizados três tratamentos: controle - sem aplicação de pLH no início do estro; pLH2,5 - uso de 2,5 mg de pLH no início do estro via i.m.; pLH5 - uso de 5 mg de pLH no início do estro via i.m. Não foram observadas diferenças no intervalo início do estro e a ovulação (IOEO) entre os diferentes tratamentos (P>0,05). De forma semelhante a distribuição de frequência do IOEO não diferiu entre os tratamentos (P>0,05). Em um segundo estudo, foi avaliado uma rota alternativa de aplicação de pLH e a performance reprodutiva de leitoas submetidas a uma única IATF. Assim, os seguintes tratamentos foram realizados: Controle - sem aplicação de hormônio no inicio do estro e realização de protocolos de múltiplas IAs; VS2.5FTAI - uso de 2,5 mg de pLH aplicado no início do estro via submucosa vulvar (v.s.) e realização de uma única IATF 16 h após; IM5FTAI - uso de 5 mg de pLH aplicado no inicio do estro via i.m. e realização de uma única IATF 16 h após. Em média foram observadas diferenças no IOEO entre os tratamentos (P<0,05) e maior frequência de leitoas ovuladas até 24 h após o inicio do estro no grupo VS2.5FTAI em relação ao grupo controle (P<0,05). A taxa de parto ajustada (AFR) não diferiu entre tratamentos (P>0,05), porém o total de leitões nascidos (TPB) foi menor no grupo VS2.5FTAI em relação ao grupo controle (P<0,05). Com objetivo de ajustar o protocolo de IATF em leitoas para uma melhor aplicabilidade prática na rotina das granjas e avaliar o uso do pLH via v.s. em porcas desmamadas, o terceiro estudo foi conduzido através de dois experimentos. Nas leitoas foram realizados dois tratamentos: controle-G - sem uso de pLH no início do estro e realização de múltiplas inseminações ao longo do estro; FTAI-G - aplicação de 2,5 mg de pLH via v.s. no início do estro e realização de uma única IATF 12 h após. O IOEO foi menor nas leitoas do grupo FTAI-G comparado ao controle-G (P<0,05), no entanto a distribuição de frequência do IOEO não foi diferente entre os tratamentos (P>0,05). A AFR foi menor para o grupo FTAI-G quando comprado ao controle-G (P<0,05). Diferenças no TPB não foram observadas entre tratamentos (P>0,05). Nas porcas desmamadas, foram realizados três tratamentos: Controle-S - sem aplicação de pLH no início do estro e realização de múltiplas inseminações; FTAI-NH - sem aplicação de pLH no início do estro e realização de uma única inseminação 24 h após; FTAI-pLH - uso de 2,5 mg de pLH no início do estro via v.s. e realização de uma única inseminação 24 h após. Os resultados deste estudo não asseguraram diferença quanto a AFR e TPB entre os distintos tratamentos (P>0,05). / The reduction in the number of semen doses used per sow served through of a single fixed-time insemination (FTAI) allows sperm cell reduction per sow served, optimising the artificial insemination (AI) programs. Considering the large variability in the interval between oestrus onset and ovulation the ovulation time, the FTAI protocols require hormones to synchronise ovulation. Thus, the aim of this study was to evaluate the use of different dosages of porcine luteinising hormone (pLH) given at oestrous onset in gilts and sows through different routes of application to synchronise the ovulation and to define a protocol of FTAI. The first study evaluated the effect of different dosages of pLH applied at oestrous onset by intramuscular route (i.m.) in gilts on interval between oestrus onset to ovulation. In this way three treatments were performed: control - without pLH application at oestrous onset; pLH2.5 - use of 2.5 mg of pLH given at oestrous onset by i.m. route; pLH5 - use of 5 mg of pLH given at oestrus onset by i.m. route. Differences in the interval onset of oestrus to ovulation (IOEO) among treatments (P>0.05) were not observed. Similarly the frequency distribution of IOEO did not differ among treatments (P>0.05). In a second study, was evaluated an alternative route of pLH application and the reproductive performance of gilts submitted to a single FTAI. Thus, the following treatments were performed: control – without pLH application at oestrous onset and use of multiple AI; VS2.5FTAI – use of 2.5 mg of pLH injected at oestrus onset by vulvar submucosal route (v.s) and use of a single FTAI 16 h later; IM5FTAI – use of 5 mg of pLH injected at oestrous onset by i.m. and use of a single FTAI 16 h later. On average differences in the IOEO among treatments (P<0.05) were observed and more VS2.5FTAI gilts ovulated up to 24 h after oestrous onset in relation to control (P<0.05). Adjusted farrowing rate (AFR) did not differ among treatments (P>0.05), however the total piglets born (TPB) was lower in the group VS2.5FTAI compared to control (P<0.05). In order to adjust the FTAI protocol in gilts for a practical use in the routine of the farm and to evaluate the use of pLH by v.s. route in weaned sows, the third study was conducted through two experiments. In gilts two treatments were performed: control-G - without pLH injection at oestrous onset and use of multiple AI during the oestrous; FTAI-G – 2.5 mg pLH applied by v.s. route at oestrous onset and use of a single FTAI 12 h later. The IOEO was shorter in the FTAI-G gilts compared to control-G (P<0.05), but the frequency distribution of IOEO did not differ between treatment (P>0.05). The AFR was lower to FTAI-G group compared to control-G (P<0.05). Differences on TPB between treatments were not observed (P>0.05). In the weaned sows three treatments were performed: control-S - without pLH application at oestrous onset and use of multiple inseminations; FTAI-NH - no hormone application and a single FTAI 24h after the onset of oestrus detection; FTAI-pLH - use of 2.5 mg pLH at oestrous onset by v.s. route and use of a single FTAI 24 h later. The results of this study did not insure difference on the AFR and TPB among treatments (P>0.05).
|
208 |
Etude de la dynamique des oscillateurs à vortex par synchronisation et modulation de fréquence / study of the vortex oscillators dynamic by synchronization and frequency modulationMartin, Sylvain Yoann 23 October 2013 (has links)
Depuis 2004, les composants radiofréquence (RF) suscitent un intérêt croissant au sein de la communauté spintronique, tant du point de vue de la physique fondamentale que des applications potentielles. Ces composants ont émergé suite à la découverte du couple de transfert de spin (STT) qui permet d'exciter l'aimantation grâce à un courant électrique. Dans ce contexte, j'ai étudié des oscillateurs à vortex basés sur des jonctions tunnel magnétiques à très faible résistance dans lesquelles un vortex magnétique suit un mouvement périodique dû au STT.On observe des oscillations de ce vortex lorsque la jonction est polarisée par un large courant dc sous un faible champ planaire. En effet, le courant produit à la fois un fort champ d'Ampère, qui contribue à la nucléation du vortex, et génère le STT qui met le vortex en mouvement. Grâce à l'oscillation du vortex, ces composants émettent un signal RF d'une forte puissance (jusqu'à 20nW) avec une fréquence naturelle d'environ 450MHz.J'ai étudié la synchronisation de ces oscillateurs en injectant, en plus courant continu, une excitation RF. Lorsque ce signal d'excitation est suffisamment puissant, l'oscillateur se verrouille sur la source externe. On observe une diminution du bruit autour du pic fondamental et une augmentation de l'amplitude de celui-ci. J'explique ces observations en modélisant le système en tant qu'oscillateur paramétrique. Cette modélisation permet de décrire certains phénomènes observés expérimentalement, comme le fait qu'il est plus facile d'atteindre le régime d'instabilité dynamique quand la fréquence de l'excitation est égale à deux fois la fréquence naturelle de l'oscillateur.Ensuite, j'ai réalisé une expérience de modulation de fréquence (FM), en excitant l'échantillon avec une onde RF à basse fréquence. L'expérience consiste à mesurer la densité spectral de puissance du signal tout en balayant la fréquence de l'onde de modulation et ceci à différente puissance. Il apparait alors que la description usuelle de la FM ne puisse plus être utilisée dans notre cas, car la fréquence de modulation est trop grande par rapport à la fréquence naturelle. Cela est dû au fait que le vortex met un certain temps à répondre à une excitation. Pour expliquer mes mesures, j'ai donc dû introduire le concept de sensibilité à la déviation, qui correspond à la dépendance de la fréquence de l'oscillateur avec le courant quand celui-ci varie périodiquement. / Since 2004, research on radiofrequency (RF) spintronic devices has been very active, both from a fundamental point of view as well as for their potential applications as RF oscillators or spin-diodes. These devices are based on spin transfer torque (STT). In this context, I studied vortex oscillators based on ultra-low resistance magnetic tunnel junctions in which vortex dynamics is driven into a periodic motion by STT. The vortex oscillations are observed when the junction is subjected to a large dc bias current and a low in-plane field. The dc current produces both a large Oersted field which contributes to the vortex nucleation and a STT that starts the vortex oscillation. This oscillation leads to a large output power up to 20nW with a fundamental frequency around 450MHz and many harmonics.Synchronization with an external signal was then tested by adding a RF current to the dc bias current. With a large enough input power, the oscillator locks on the external source: the noise is then drastically reduced and the spectral purity of the signal significantly increases. These observations are explained by describing the system as a parametric oscillator. This model predicts, as experimentally observed, that, for a small amplitude of the RF excitation, a dynamical instability can be more easily reached when its frequency is twice the natural frequency of the oscillator than for any other frequencies.Then, I performed frequency modulation measurements by exciting the dc-biased sample with a low frequency ac-current. The power spectral density was measured as I swept the modulation frequency for various modulation powers. It appears that the description previously used to describe modulation experiments does not apply when the modulation frequency is a significant fraction of the natural frequency. The vortex response time appears to play a significant role, so that the concept of deviation sensitivity has to be introduced to explain the observations: it corresponds to the dynamical dependence of the oscillator frequency with an applied current that varies with time.
|
209 |
Inseminação artificial em tempo fixo em leitoas e porcas desmamadas com o uso de hormonio luteinizante suíno através de diferentes vias de aplicaçãoUlguim, Rafael da Rosa January 2014 (has links)
A redução do número de doses inseminantes por fêmea coberta utilizando protocolos de uma única inseminação em tempo fixo (IATF) permitem reduzir o número de células espermáticas por fêmea coberta e otimizar os programas de inseminação artificial (IA). Considerando a grande variabilidade no intervalo entre o início do estro e a ovulação, os protocolos de IATF exigem hormonios para a sincronização da ovulação. Assim, o objetivo deste estudo foi avaliar a utilização de diferentes dosagens de hormônio luteinizante suíno (pLH) aplicado no início do estro em leitoas e porcas, através de diferentes vias de aplicação, para sincronização da ovulação e definição de um protocolo de IATF. O primeiro estudo avaliou o efeito de diferentes dosagens de pLH aplicado em leitoas no início do estro por via intramuscular (i.m.), sobre o intervalo início estro e a ovulação. Desta forma foram realizados três tratamentos: controle - sem aplicação de pLH no início do estro; pLH2,5 - uso de 2,5 mg de pLH no início do estro via i.m.; pLH5 - uso de 5 mg de pLH no início do estro via i.m. Não foram observadas diferenças no intervalo início do estro e a ovulação (IOEO) entre os diferentes tratamentos (P>0,05). De forma semelhante a distribuição de frequência do IOEO não diferiu entre os tratamentos (P>0,05). Em um segundo estudo, foi avaliado uma rota alternativa de aplicação de pLH e a performance reprodutiva de leitoas submetidas a uma única IATF. Assim, os seguintes tratamentos foram realizados: Controle - sem aplicação de hormônio no inicio do estro e realização de protocolos de múltiplas IAs; VS2.5FTAI - uso de 2,5 mg de pLH aplicado no início do estro via submucosa vulvar (v.s.) e realização de uma única IATF 16 h após; IM5FTAI - uso de 5 mg de pLH aplicado no inicio do estro via i.m. e realização de uma única IATF 16 h após. Em média foram observadas diferenças no IOEO entre os tratamentos (P<0,05) e maior frequência de leitoas ovuladas até 24 h após o inicio do estro no grupo VS2.5FTAI em relação ao grupo controle (P<0,05). A taxa de parto ajustada (AFR) não diferiu entre tratamentos (P>0,05), porém o total de leitões nascidos (TPB) foi menor no grupo VS2.5FTAI em relação ao grupo controle (P<0,05). Com objetivo de ajustar o protocolo de IATF em leitoas para uma melhor aplicabilidade prática na rotina das granjas e avaliar o uso do pLH via v.s. em porcas desmamadas, o terceiro estudo foi conduzido através de dois experimentos. Nas leitoas foram realizados dois tratamentos: controle-G - sem uso de pLH no início do estro e realização de múltiplas inseminações ao longo do estro; FTAI-G - aplicação de 2,5 mg de pLH via v.s. no início do estro e realização de uma única IATF 12 h após. O IOEO foi menor nas leitoas do grupo FTAI-G comparado ao controle-G (P<0,05), no entanto a distribuição de frequência do IOEO não foi diferente entre os tratamentos (P>0,05). A AFR foi menor para o grupo FTAI-G quando comprado ao controle-G (P<0,05). Diferenças no TPB não foram observadas entre tratamentos (P>0,05). Nas porcas desmamadas, foram realizados três tratamentos: Controle-S - sem aplicação de pLH no início do estro e realização de múltiplas inseminações; FTAI-NH - sem aplicação de pLH no início do estro e realização de uma única inseminação 24 h após; FTAI-pLH - uso de 2,5 mg de pLH no início do estro via v.s. e realização de uma única inseminação 24 h após. Os resultados deste estudo não asseguraram diferença quanto a AFR e TPB entre os distintos tratamentos (P>0,05). / The reduction in the number of semen doses used per sow served through of a single fixed-time insemination (FTAI) allows sperm cell reduction per sow served, optimising the artificial insemination (AI) programs. Considering the large variability in the interval between oestrus onset and ovulation the ovulation time, the FTAI protocols require hormones to synchronise ovulation. Thus, the aim of this study was to evaluate the use of different dosages of porcine luteinising hormone (pLH) given at oestrous onset in gilts and sows through different routes of application to synchronise the ovulation and to define a protocol of FTAI. The first study evaluated the effect of different dosages of pLH applied at oestrous onset by intramuscular route (i.m.) in gilts on interval between oestrus onset to ovulation. In this way three treatments were performed: control - without pLH application at oestrous onset; pLH2.5 - use of 2.5 mg of pLH given at oestrous onset by i.m. route; pLH5 - use of 5 mg of pLH given at oestrus onset by i.m. route. Differences in the interval onset of oestrus to ovulation (IOEO) among treatments (P>0.05) were not observed. Similarly the frequency distribution of IOEO did not differ among treatments (P>0.05). In a second study, was evaluated an alternative route of pLH application and the reproductive performance of gilts submitted to a single FTAI. Thus, the following treatments were performed: control – without pLH application at oestrous onset and use of multiple AI; VS2.5FTAI – use of 2.5 mg of pLH injected at oestrus onset by vulvar submucosal route (v.s) and use of a single FTAI 16 h later; IM5FTAI – use of 5 mg of pLH injected at oestrous onset by i.m. and use of a single FTAI 16 h later. On average differences in the IOEO among treatments (P<0.05) were observed and more VS2.5FTAI gilts ovulated up to 24 h after oestrous onset in relation to control (P<0.05). Adjusted farrowing rate (AFR) did not differ among treatments (P>0.05), however the total piglets born (TPB) was lower in the group VS2.5FTAI compared to control (P<0.05). In order to adjust the FTAI protocol in gilts for a practical use in the routine of the farm and to evaluate the use of pLH by v.s. route in weaned sows, the third study was conducted through two experiments. In gilts two treatments were performed: control-G - without pLH injection at oestrous onset and use of multiple AI during the oestrous; FTAI-G – 2.5 mg pLH applied by v.s. route at oestrous onset and use of a single FTAI 12 h later. The IOEO was shorter in the FTAI-G gilts compared to control-G (P<0.05), but the frequency distribution of IOEO did not differ between treatment (P>0.05). The AFR was lower to FTAI-G group compared to control-G (P<0.05). Differences on TPB between treatments were not observed (P>0.05). In the weaned sows three treatments were performed: control-S - without pLH application at oestrous onset and use of multiple inseminations; FTAI-NH - no hormone application and a single FTAI 24h after the onset of oestrus detection; FTAI-pLH - use of 2.5 mg pLH at oestrous onset by v.s. route and use of a single FTAI 24 h later. The results of this study did not insure difference on the AFR and TPB among treatments (P>0.05).
|
210 |
Inseminação artificial em tempo fixo em leitoas e porcas desmamadas com o uso de hormonio luteinizante suíno através de diferentes vias de aplicaçãoUlguim, Rafael da Rosa January 2014 (has links)
A redução do número de doses inseminantes por fêmea coberta utilizando protocolos de uma única inseminação em tempo fixo (IATF) permitem reduzir o número de células espermáticas por fêmea coberta e otimizar os programas de inseminação artificial (IA). Considerando a grande variabilidade no intervalo entre o início do estro e a ovulação, os protocolos de IATF exigem hormonios para a sincronização da ovulação. Assim, o objetivo deste estudo foi avaliar a utilização de diferentes dosagens de hormônio luteinizante suíno (pLH) aplicado no início do estro em leitoas e porcas, através de diferentes vias de aplicação, para sincronização da ovulação e definição de um protocolo de IATF. O primeiro estudo avaliou o efeito de diferentes dosagens de pLH aplicado em leitoas no início do estro por via intramuscular (i.m.), sobre o intervalo início estro e a ovulação. Desta forma foram realizados três tratamentos: controle - sem aplicação de pLH no início do estro; pLH2,5 - uso de 2,5 mg de pLH no início do estro via i.m.; pLH5 - uso de 5 mg de pLH no início do estro via i.m. Não foram observadas diferenças no intervalo início do estro e a ovulação (IOEO) entre os diferentes tratamentos (P>0,05). De forma semelhante a distribuição de frequência do IOEO não diferiu entre os tratamentos (P>0,05). Em um segundo estudo, foi avaliado uma rota alternativa de aplicação de pLH e a performance reprodutiva de leitoas submetidas a uma única IATF. Assim, os seguintes tratamentos foram realizados: Controle - sem aplicação de hormônio no inicio do estro e realização de protocolos de múltiplas IAs; VS2.5FTAI - uso de 2,5 mg de pLH aplicado no início do estro via submucosa vulvar (v.s.) e realização de uma única IATF 16 h após; IM5FTAI - uso de 5 mg de pLH aplicado no inicio do estro via i.m. e realização de uma única IATF 16 h após. Em média foram observadas diferenças no IOEO entre os tratamentos (P<0,05) e maior frequência de leitoas ovuladas até 24 h após o inicio do estro no grupo VS2.5FTAI em relação ao grupo controle (P<0,05). A taxa de parto ajustada (AFR) não diferiu entre tratamentos (P>0,05), porém o total de leitões nascidos (TPB) foi menor no grupo VS2.5FTAI em relação ao grupo controle (P<0,05). Com objetivo de ajustar o protocolo de IATF em leitoas para uma melhor aplicabilidade prática na rotina das granjas e avaliar o uso do pLH via v.s. em porcas desmamadas, o terceiro estudo foi conduzido através de dois experimentos. Nas leitoas foram realizados dois tratamentos: controle-G - sem uso de pLH no início do estro e realização de múltiplas inseminações ao longo do estro; FTAI-G - aplicação de 2,5 mg de pLH via v.s. no início do estro e realização de uma única IATF 12 h após. O IOEO foi menor nas leitoas do grupo FTAI-G comparado ao controle-G (P<0,05), no entanto a distribuição de frequência do IOEO não foi diferente entre os tratamentos (P>0,05). A AFR foi menor para o grupo FTAI-G quando comprado ao controle-G (P<0,05). Diferenças no TPB não foram observadas entre tratamentos (P>0,05). Nas porcas desmamadas, foram realizados três tratamentos: Controle-S - sem aplicação de pLH no início do estro e realização de múltiplas inseminações; FTAI-NH - sem aplicação de pLH no início do estro e realização de uma única inseminação 24 h após; FTAI-pLH - uso de 2,5 mg de pLH no início do estro via v.s. e realização de uma única inseminação 24 h após. Os resultados deste estudo não asseguraram diferença quanto a AFR e TPB entre os distintos tratamentos (P>0,05). / The reduction in the number of semen doses used per sow served through of a single fixed-time insemination (FTAI) allows sperm cell reduction per sow served, optimising the artificial insemination (AI) programs. Considering the large variability in the interval between oestrus onset and ovulation the ovulation time, the FTAI protocols require hormones to synchronise ovulation. Thus, the aim of this study was to evaluate the use of different dosages of porcine luteinising hormone (pLH) given at oestrous onset in gilts and sows through different routes of application to synchronise the ovulation and to define a protocol of FTAI. The first study evaluated the effect of different dosages of pLH applied at oestrous onset by intramuscular route (i.m.) in gilts on interval between oestrus onset to ovulation. In this way three treatments were performed: control - without pLH application at oestrous onset; pLH2.5 - use of 2.5 mg of pLH given at oestrous onset by i.m. route; pLH5 - use of 5 mg of pLH given at oestrus onset by i.m. route. Differences in the interval onset of oestrus to ovulation (IOEO) among treatments (P>0.05) were not observed. Similarly the frequency distribution of IOEO did not differ among treatments (P>0.05). In a second study, was evaluated an alternative route of pLH application and the reproductive performance of gilts submitted to a single FTAI. Thus, the following treatments were performed: control – without pLH application at oestrous onset and use of multiple AI; VS2.5FTAI – use of 2.5 mg of pLH injected at oestrus onset by vulvar submucosal route (v.s) and use of a single FTAI 16 h later; IM5FTAI – use of 5 mg of pLH injected at oestrous onset by i.m. and use of a single FTAI 16 h later. On average differences in the IOEO among treatments (P<0.05) were observed and more VS2.5FTAI gilts ovulated up to 24 h after oestrous onset in relation to control (P<0.05). Adjusted farrowing rate (AFR) did not differ among treatments (P>0.05), however the total piglets born (TPB) was lower in the group VS2.5FTAI compared to control (P<0.05). In order to adjust the FTAI protocol in gilts for a practical use in the routine of the farm and to evaluate the use of pLH by v.s. route in weaned sows, the third study was conducted through two experiments. In gilts two treatments were performed: control-G - without pLH injection at oestrous onset and use of multiple AI during the oestrous; FTAI-G – 2.5 mg pLH applied by v.s. route at oestrous onset and use of a single FTAI 12 h later. The IOEO was shorter in the FTAI-G gilts compared to control-G (P<0.05), but the frequency distribution of IOEO did not differ between treatment (P>0.05). The AFR was lower to FTAI-G group compared to control-G (P<0.05). Differences on TPB between treatments were not observed (P>0.05). In the weaned sows three treatments were performed: control-S - without pLH application at oestrous onset and use of multiple inseminations; FTAI-NH - no hormone application and a single FTAI 24h after the onset of oestrus detection; FTAI-pLH - use of 2.5 mg pLH at oestrous onset by v.s. route and use of a single FTAI 24 h later. The results of this study did not insure difference on the AFR and TPB among treatments (P>0.05).
|
Page generated in 0.0329 seconds