The master’s thesis deals with proposal of technological process for production of computer case in EMKO Case a.s. Computer case is manufactured from a DX51D + Z275 steel sheet with thickness 1 mm. For manufacturing were chosen technology punching and press-brake bending as the best technologies. Master’s thesis contains literary studies of these chosen technologies. Based on literary studies were made technological calculations, proposal of technological process and choice of machines. For punching was chosen machine TRUMPF TruPunch 2000, for press-brake bending hydraulic machine TRUMPF TrumaBend 50V. For chosen solution is made technical and economical evaluation.

The thesis focuses on the production concept of component Cage ECR 10 12, which is used as assembly element together with a nut during the bus production. Sheet metal part is made from 11 321 steel 1,5 mm thick in production 10 000 parts per year. Technology of production in progressive tool was selected based on literature study. Progressive tool combines technology of shearing and bending. Tool was designed after the technological calculations. Forming machine was selected after the stamping force calculation. Eccentric press LEN 63 C with 630 kN forming force was selected for production.

The diploma thesis presents technology production design of a data projector bracket made of 2 mm thickness 11 321 steel plate. Considering the large production quantity and maximum tolerable deviations, a progressive die tool along with cutting and bending was chosen as the optimal solution for this type of production, based on a variant solution. Technological aspects were assessed, the production process was established, and technological and control calculations were performed. According to the total forming force of 2 000 kN, the LDC 250 mechanical press with a nominal force of 2 500 kN, manufactured in Šmeral Brno a.s., was chosen to meet the production requirements. The chosen material in a form of metal sheet coils will be supplied to the machine by a feeding device. The article will be manufactured in six steps. Based on technical-economic evaluation, the final price of a single piece in a series of 250 000 pieces per year was set at 30,80 Kč.

This master’s thesis is focused on the design of the technology to produce a part of the TV bracket. The part is made of steel sheet with a thickness of 2.5 mm. The structural steel S235JR was chosen as the most suitable material with following powder coating. From the possible variants, the production by progressive forming tool was chosen with respect to production requirements and a series size of 30 000 pieces by year. The part will be made in seven steps in designed tool and the total required force is 1013 kN. The production will take place on a mechanical press PCK12 from Bliss-Bret with a maximum force of 1250 kN. The final price of the part is 39.4 Kč.

This master´s thesis focuses on the concept of manufacturing of carbon brush holder, made of steel S235JRG (ČSN 11 343), with thickness of 1,5 mm. In order to reduce costs, it was decided to manufacture the holder with progresive stamping tool, which combines cutting, bending and edging operations in order to achieve specific part shape. Based on relevant calculations the mechanical press LEN 63 C was chosen. The production series was set at 50 000 pieces.

Project elaborate in terms of engineering studies branch 2303T002 submits proposal technology of production single parts from deep drawing press steel metal plate 11 305.21. On the basis literary study problems blanking, deep drawing and calculations was designed drawing in instrument with holder, to extrusion components serves lower ejector. Combination tool is set on hydraulic press CTH 250 with nominal tensile by force 250 kN. Drawable tools (drawing punch, drawing die) and shear pin tools (blanking punch, blanking die) are made from instrumental steels 19 436.3, heat treated condition to drawing documentation.

The project drawn up within engineering studies, field N2307-00, presents a design for processing a single part – the part is made of sheet steel number S235JRG1 by shearing and bending. On the basis of literary study was design compound tool which is working in three steps. The tool is fixed in eccentric press LEN 40 C (producer TOMA Industries, s.r.o.) with nominal force 400 kN. Blanking punch and blanking die are made from tool steel 19 436 according the drawing documentation.

The project elaborated in frame of engineering studies branch 2303T002. The project is submitting design of technology production of the part from the deep drawing sheet iron 11 320.30. Pursuant to of the literary pursuit a problem of the shearing, bending and calculation was designed manufacturing in transfer combined die, which is set on the eccentric press LEXN 100 C (producer TOMA INDUSTRIES s.r.o. Trnava), with nominal force 1000 kN. Functional parts of tool are produced of tool steel 19 436.3.

The in the framework of Master’s Studies developed project presents a technology- proposal for the production of a pressing tool for the manufacturing of parts from the sheet steel DD13. On the basis of a literary survey of problems of the component manufacturing through shearing, bending and the studies of heat treatment and applications of covering coat and calculation, manufacturing in the phase-shearing tool was proposed. The press GERB EDELHOFF 80 t was selected as the working device.

KVAPIL Jan: Bending and cutting press machine for representativ part The Master´s thesis, which is developer in an undergraduate degrese in M-VSR, provides a brief overview and description of the cutting and bending technology. The thesis is carried out the calculation, which is essential for the design cutting and bending tools. Models and design are created in the software SolidWorks 2012. The Master´s thesis includes a general procedure after the award until after copy the parts on it.