<p>The aim of this paper is to perform a comparative study between the photography’s of Leila Khaled and Shirin Neshat in order to observe if the woman are able to recede from an conventional formation to become the bearer of the veil and not only reduced to that which</p><p>needs to be concealed. From a feministic perspective I have observed how the symbolic of the veil moulds the woman and how the woman in her context moulds the veil.</p><p>In the description of the news photography of Khaled and the art photography produced by Neshat the mechanisms that lies as a foundation for the modelling of the portraits becomes</p><p>the essays primary entrance. Mechanisms that evolve around the creation of the woman as aconcept, a subject shaped for being looked at and the woman’s self-image through others.</p><p>The textual discourse is visually enhanced through a comparative picture material visually enhanced and explained through photographs by the contemporary artist photographers Cindy Sherman, Catherine Opie, Laurie Simmons, Robert Mapplethorpe and Elin Berge. The visual comparative material also interacts with the essays primary picture material and further expresses the oppression of the woman that occurs irrespective of culture through a patriarch cal gender system.</p>

The derivation of the standard model from a higher-dimensional action suggests a further study of the fibre bundle formulation of gauge theories to determine the variations in the choice of structure group that are allowed in this geometrical setting. The action of transformations on the projection of fibres to their submanifolds are characteristic of theories with fewer gauge vector bosons, and specific examples are given, which may have phenomenological relevance. The spinor space for the three generations of fermions in the standard model is described algebraically.

The aim of this paper is to perform a comparative study between the photography’s of Leila Khaled and Shirin Neshat in order to observe if the woman are able to recede from an conventional formation to become the bearer of the veil and not only reduced to that which needs to be concealed. From a feministic perspective I have observed how the symbolic of the veil moulds the woman and how the woman in her context moulds the veil. In the description of the news photography of Khaled and the art photography produced by Neshat the mechanisms that lies as a foundation for the modelling of the portraits becomes the essays primary entrance. Mechanisms that evolve around the creation of the woman as aconcept, a subject shaped for being looked at and the woman’s self-image through others. The textual discourse is visually enhanced through a comparative picture material visually enhanced and explained through photographs by the contemporary artist photographers Cindy Sherman, Catherine Opie, Laurie Simmons, Robert Mapplethorpe and Elin Berge. The visual comparative material also interacts with the essays primary picture material and further expresses the oppression of the woman that occurs irrespective of culture through a patriarch cal gender system.

This thesis investigates the underlying causes of friction and ine ciency within an internal combustion engine, focusing on the ring-liner conjunction in the vicinity of the power-stroke top dead centre reversal. In such lubricated contacts, friction is the result of the interplay between numerous kinetics, with those at micro- and nano-scale interactions being signi cantly di erent than the ones at larger scales. A modi ed Elrod's cavitation algorithm is developed to determine the microscopic tribological characteristics of the piston ring-liner contact. Predicting lubricant tran- sient behaviour is critical when the inlet reversal leads to thin lms and inherent metal-to-metal interaction. The model clearly shows that cavitation at the trailing edge of the ring-liner contact generated pre-reversal, persists after reversal and pro- motes starvation and depletion of the oil lm. Hence, this will lead to boundary friction. A fractal based boundary friction model is developed for lightly loaded asperity con- tacts, separated by diminishing small lms, usually wetted by a layer of molecules adsorbed to the tips of the asperities. In nano-scale conjunctions, a lubricant layering e ect often takes place due to the smoothness of surfaces, which is governed by the surface and lubricant properties. A molecularly thin layer of lubricant molecules can adhere to the asperities, being the last barrier against direct surface contact. As a result, boundary friction (prevailing in such diminishing gaps) is actually determined by a combination of shearing of a thin adsorbed lm, adhesion of approaching as- perities and their plastic deformation. A model for physio-chemical hydrodynamic mechanism is successfully established, describing the formation of thin adsorbed lms between asperities. This model is e ectively integrated with separately devel- oped models that predict the adhesive and plastic contact of asperities.

This dissertation examines the relationship between women and economics in American Progressive Era through the discussion of selected works by Charlotte Perkins Gilman, Kate Chopin, and Edith Wharton. The authors and texts included in the study together demonstrate how women responded to the economic development and the concept of the separate spheres at the-turn-into-the-twentieth-century America. Based on Thorstein Veblen¡¦s socio-psychological theory of the leisure class and the institutional economics and Gilman¡¦s analysis on the sexual-economic relationship in marriage, my discussion aims to investigate the interconnection between human relationships, women¡¦s economic values, and economic exchanges in business, focusing on the methods the three women writers employ to re/present how middle/upper-class women redefine womanhood and construct female subjectivity in an economic system that favors men. In my introductory chapter, I explain the historical background of the period, general concepts in Veblen¡¦s economic theory, and the motivation, methodology, and organization of the dissertation. Chapter Two, ¡§Veblenian Workmanship and Gilman¡¦s Woman-Made Land,¡¨ purports to cross-examine Gilman¡¦s Women and Economics and her utopian fiction Herland, aiming to show Gilman¡¦s optimistic view on women¡¦s emancipation from the private to the public. In Chapter Three, ¡§Barbarian Status of Women and Chopin¡¦s Feminism,¡¨ I discuss by Chopin¡¦s The Awakening the tension between women¡¦s growing sense of an autonomous self and men¡¦s adherence to the institutionalized habits of thought. My fourth chapter, ¡§Conspicuous Consumption and Society Women in Edith Wharton,¡¨ is a study on the relationship between the display culture in the consumer society and woman¡¦s role as the non-productive consumer in Edith Wharton¡¦s The House of Mirth and The Custom of the Country. The concluding chapter, along with general comparisons of the heroines, outlines major arguments in the whole thesis.

For the method of fundamental solutions(MFS), many reports deal with 2D problems. Since the MFS is more advantageous for 3D problems, this thesis is devoted to Laplace's equation in 3D problems. Since the fundamental solutions(FS) £X(x,y)=1/(4£k||x-y||), x,y∈R^3 are known, the location of source points is important in real computation. In this thesis, we choose a cylinder as the solution domain, and the source points on larger cylinders and spheres. Numerical results are reported, to draw some useful conclusions. The theoretical analysis will be explored in the future.

The goal of this thesis is to study the role of single particle elasticity in the overall behavior of particulate systems. For this purpose, we use microgel particles, which are crosslinked polymer networks immersed in a solvent. In these systems, the amount of cross-linker determines their elasticity and ultimately the stiffness of the particle. For a system of hard spheres, the phase behavior is solely determined by the volume fraction occupied by the particles. Based on the volume fraction, liquid, crystal and glassy phases are observed. Interestingly, microgel particles display a richer and fascinating set of different behaviors depending on the particle stiffness. Previous results obtained in our group show that for highly cross-linked microgels, the glass phase disappears and there are only liquid and crystalline phases. By contrast, preliminary measurements indicate that for ultrasoft microgel particles the system does not show any signature of crystalline or glassy phases. The system seems to remain liquid irrespective of volume fractions. In this Thesis, we will address this striking result using light scattering as well as rheology, in order to access both static and dynamic properties in a wide range of length and time scales. In addition, we will also perform additional studies using very stiff microgels and use their swelling capabilities to change the volume fraction. We will use hydrostatic pressure to change the miscibility of the polymer network and thus change the microgel size; the use of this external variable allows fast equilibration times and homogeneous changes throughout the sample. By using neutron scattering techniques, we study the structural and dynamical properties of the system in its different phases involved.

Packed beds find extensive application in a wide variety of industries to cany out a large number of diverse processes. The main objective of the present work is to develop models to predict the arrangement of particles and based on them, to determine and evaluate the structural characteristics of packed beds. These problems have received only a limited attention in the literature. As a first attempt, spheres of uniform size are considered. Beds of aspect ratio up to 2 (referred to as low aspect ratio beds) are analyzed by application of principles of analytical geometry. Expressions are derived for the location of particles and for the structural characteristics of the beds, both of which show periodicity. This leads to the concept of a unit cell which is the repetitive section of the bed whose characteristics are the same as those of the complete bed. The beds fall into three distinct groups — those with aspect ratio between 1 and l√3⁄2, between 1√3⁄2 and 2, and with aspect ratio 2. Equations are distinct for each group. The aspect ratio shows marked influence on the structural characteristics of the beds. Agreement of the predictions on the overall void fraction with the available experimental data is excellent. Radial void fraction profiles are estimated by defining a concentric cylindrical channel (CCC) of an arbitrary thickness and with the cylindrical surface through the radial position of interest located at the middle of the CCC, and by accounting for the solid volumes of all the segments (in this CCC) of spheres with centers lying within a distance of a particle radius on either side of the cylindrical surface. The curved boundaries of the sphere segments are rigorously accounted for. The results show that the entire bed is filled with variations in the void fraction, starting from a value of unity at the wall and zero (or close to zero) towards the axis of the bed. Monte Carlo model for the simulation of high aspect ratio beds has not proved successful even with any of a wide variety of distribution functions for the coordinates of the sphere dropping point. With uniform distribution, the only distribution used in all the reports so far, and with normal distribution, there is not even a qualitative agreement with the reported data on void fraction variations. Distributions with asymmetric density functions such as exponential, Weibull, gamma and beta, show considerable improvement; beta distribution being the best. However even the best results with beta distribution show satisfactory agreement with the experimental data only up to about 2dp from the wall. Simulations with the cluster growth model, modified to account for the confining nature of the wall, lead to more satisfactory results. The proposed algorithm consists of building up the cluster, sphere by sphere, by calculating all possible interior and wall sites for placing an incoming sphere in a stable and non-overlapping position on the current cluster. A preference parameter is defined to place the new sphere at locations along the cross section of the column at which the experimental void fraction profiles show prominent minima, that is, locations around which the bed has relatively high solid volume. Void fraction profiles in beds of various aspect ratios simulated by this model show good agreement with the corresponding experimental data. The structural characteristics of the high aspect ratio beds thus simulated are evaluated. The number of spheres per unit length, Ni is correlated with the aspect ratio. It becomes proportional to the square of the aspect ratio, with the proportionality constant being close to 0.9, for aspect ratios greater than about 10. This follows since in these beds the overall void fraction becomes constant at 0.4. Majority of the spheres have contacts (with neighboring spheres) between 4 and 7, with the lower and upper limits for the coordination number being 2 and 9. The radial profile of the average coordination number (averaged over the height of the bed at the given radial position) shows small oscillations about a mean value of about 6 over almost the entire bed cross section starting from a distance of about ldp from the wall. At a distance of 0.5dp from the wall the predominant number of contacts is four while the mean value is about 4.3. The overall coordination number (averaged over the entire bed) shows inverse dependence on the aspect ratio. For random packings, that is, as the aspect ratio becomes infinity, the overall coordination number tends to six which corresponds to regular cubic arrangement. Cumulative number fraction, CNf is a global measure of the arrangement of spheres in beds of high aspect ratio. Its radial variation shows four distinct regions whose locations are independent of the aspect ratio The CNf values in each region are correlated with aspect ratio The correlations combined with that of NL lead to a very useful and effective model for predicting void fraction profiles in a bed of any specified aspect ratio The validity of the predictive model is demonstrated

Radars, as the name suggests, were traditionally used for Radio Detection and Ranging. Nevertheless, advances in high resolution electromagnetic simulations, Ultra Wide-Band sources, signal processing and computer technologies have resulted in a possible perception of radars as sensors for target discrimination. In this thesis, the feasibility of discrimination between targets even with minor variations in structure and material composition on the basis of radar echoes is effectively demonstrated. It is well-known that the echoes from any target are affected by its natural frequencies which are dependent only on the shape and material composition of the target, and independent of the aspect angle or the incident waveform. The E-pulse technique is based on the fact that incident waveforms can be designed that uniquely annihilate the echoes from chosen regions of a target, and forms the basis of the method of discrimination proposed in this thesis. Earlier methods reported in the literature, effectively discriminated only between different classes of targets with substantial variations in the overall dimensions of the body. Discrimination of targets of the same class with a minor structural modification or with a material coating on specific areas was rather difficult. This thesis attempts and successfully validates a method which comprehensively addresses this problem. The key idea of this method is to use the higher frequency resonances (which characterise the finer details of a target) in the E-pulse technique. An obviously important aspect of target discrimination is therefore that of precisely estimating the natural frequencies for each target and understanding the changes in these frequencies, and their associations with the changes in structure and material composition. Current approaches to determine these frequencies are either based In the time or frequency domains. While the latter approach comprises the computation of the roots of a related determinantal equation, in the time domain, the natural frequencies are extracted from the response of a target to an impulse. Such a response can either be generated from actual experiments or by simulating the scattering response using Computational Electromagnetic (CEM) techniques. In this work, the impulse response is obtained from the frequency response of the scatterers in the frequency range of interest. Since no single CEM technique can effectively cover the entire range of frequencies needed for the E-Pulse synthesis. The Method of Moments and Physical Optics have been used for low and high frequency scattering respectively. The results obtained using the latter technique are validated by comparing with those obtained using Method of Moments at the transition frequencies and Geometrical Theory of Diffraction (GTD). The natural frequencies (i.e., poles of a corresponding transfer function) are extracted from the impulse response using Prony's algorithm. One of the parameters in this method is the number of such poles (i.e.. the order of the transfer function) present in the response, and the accuracy of the computed pole values depends on this assumed order. Here, the Hankel singular values of a transfer function is used to estimate the number of poles. This in turn implies that a specific norm of the error between a transfer function corresponding to the frequency response generated earlier, and a transfer function with an assumed order obtained using Prony's method is minimised. In the thesis, a wide range of target shapes are considered for purposes of illustration: wires, cylinders, spheres, plates and complex bodies such as aircraft, and the discrimination capability is demonstrated by introducing minor perturbations in their shape and/or material composition. .The following cases are considered here: (a) Wires: Conducting wires with a protrusion in one segment; conducting wire from another coated with a dielectric in a segment, (b) Cylinders: Conducting cylinders with one perturbed; conducting cylinders with a portion scrapped off in the middle, (c) Plates: Conducting plates with a elongation on one comer; conducting plate with another one with a hole in the centre, (d) Spheres: Conducting spheres with different radii; conducting spheres with Radar Absorbing Material coated spheres with different coating thickness; conducting spheres with chiral coated spheres with varying coating thickness, (e) Aircraft: Canonical model of MiG-29 aircraft from a similar one with stores placed under the wing.

A simple and facile way to the fabrication of nano to micro scale organic-inorganic hybrid particles was demonstrated. A well known “template-assisted approach” was chosen for the preparation of these hybrid particles, in which the inorganic material of interest is templated against the template particles. A series of colloidal template particles including, polystyrene, poly (vinylcaprolactam) and poly (N-isopropylacrylamide) was used for the deposition of a variety of metal oxides/hydroxide nanoparticles. A classical surfactant free co-polymerization process was employed for the synthesis of these template particles. To facilitate the deposition of inorganic nanoparticles in subsequent steps, these colloidal particles were functionalized with the suitable functional groups. For this purpose, polystyrene particles were synthesized in the presence of acetoacetoxyethylmethacrylate (AAEM) co-monomer. Similarly, poly (vinylcaprolactam) and poly (N-isopropylacrylamide) particles were functionalized by adding AAEM and acrylic acid co-monomers, respectively, during their synthesis. It is thought that an effective interaction between these functionalities of employed template and metal oxide/hydroxide precursors is the driving force for the fabrication of organic-inorganic hybrid particles. A number of metal oxide/hydroxide nanoparticles including ZnO, TiO2, Ta2O5 and In(OH)3 were deposited on the surface of polystyrene colloidal particles. A systematic variation in the employed reaction conditions allowed a modulation in size, shape, morphology, shell thickness and inorganic contents of resulting hybrid particles. Similar effect of the employed Indium isopropoxide concentration on the morphology of PS-In(OH)3 hybrid particles was observed. In the case of PS-TiO2 and PS-Ta2O5 only core-shell morphology was observed. However, suitable surface chemistry and careful selection of reaction parameters allowed the deposition of as much thick as 130 nm TiO2/Ta2O5 shell on the polystyrene core. In addition, a controlled manipulation of the shell thickness with the employed concentration of inorganic salt was observed. Polystyrene colloidal particles coated with a high refractive index material such as TiO2, were employed as building blocks for the fabrication of self assembled colloidal crystals. The variation in particle size and TiO2 content of employed building blocks allowed the manipulation in stop band position and band width of resulting photonic structures. Furthermore, PS-ZnO hybrid particles with raspberry-like morphology were exploited as carrier for ZnO nanoparticles into a host polymer matrix to achieve a nanocomposite material. In addition, fabrication of a series of closed, intact and mechanically robust hollow spheres, composed of pure and mixed metal oxides was demonstrated. The removal of polystyrene core from PS-TiO2 and PS-Ta2O5 hybrid particles by chemical or thermal treatment resulted into the hollow TiO2 and Ta2O5 spheres, respectively. Templating of PVCL colloidal particles against ZnO nanoparticles was shown and variation in physical properties of the resulting hybrid microgels as a function of the loaded amount of ZnO nanoparticles was demonstrated. PVCL-ZnO hybrid microgels showed the temperature sensitivity of the template particles and the UV-absorbing property of the loaded ZnO nanoparticles. It was demonstrated that these hybrid materials can effectively be used in the preparation of a transparent UV-shielding material. In addition, the deposition of preformed and functionalized quantum dots (CdTe) on the surface of PNIPAm microgel particles was explored and a manipulation in the fluorescent properties of loaded quantum dots as a result of temperature induced swelling and deswelling of microgel template was investigated. It was found that the fluorescence of deposited quantum dots can be switched to “ON” or “OFF” by changing the temperature of the surrounding media. These hybrid particles are envisioned to be used in the fabrication of temperature nanosensors.