• Refine Query
  • Source
  • Publication year
  • to
  • Language
  • 19
  • 11
  • 5
  • 1
  • 1
  • Tagged with
  • 43
  • 16
  • 11
  • 10
  • 10
  • 9
  • 8
  • 8
  • 7
  • 6
  • 6
  • 6
  • 6
  • 6
  • 6
  • About
  • The Global ETD Search service is a free service for researchers to find electronic theses and dissertations. This service is provided by the Networked Digital Library of Theses and Dissertations.
    Our metadata is collected from universities around the world. If you manage a university/consortium/country archive and want to be added, details can be found on the NDLTD website.
21

Campo de pressões : condições de incipiência à cavitação em vertedouros em degraus com declividade 1V:0,75H

Gomes, Jaime Federici January 2006 (has links)
As expectativas dinâmicas de um mundo de inovações tecnológicas, consubstanciados por explorações menos agressivas ao meio ambiente, dirigidas a um mercado consumista emergente, representam desafios para soluções de problemas de engenharia dirigidos para diversos segmentos da sociedade. Com o desenvolvimento do concreto compactado com rolo (CCR), a partir dos anos 70, o emprego de vertedouros em degraus em barragens de gravidade tornou-se uma solução atrativa, visto que, proporciona, simultaneamente, o aumento da dissipação da energia do escoamento e a redução do tempo e dos custos de implantação dessas obras. Atualmente, têm-se usado como restrições ao seu emprego de vertedouros em degraus valores máximos de vazões específicas que, sem um limite consensual, vêm tolhendo suas potencialidades. A macrorugosidade da calha acelera o processo de aeração do escoamento, se comparado com um vertedouro de soleira lisa, protegendo, para a zona aerada, os degraus contra erosão por cavitação. Entretanto, para o trecho não aerado do escoamento, existem riscos desse processo se estabelecer. As descontinuidades da fronteira sólida propiciam a sucessiva separação da camada limite nos cantos externos dos degraus. Nessa região são geradas pressões muito baixas. O presente estudo, realizado no Instituto de Pesquisas Hidráulicas, objetivou, através de medições experimentais, descrever, caracterizar e modelar pressões hidrodinâmicas nas soleiras dos degraus, estabelecendo limites para incipiência à cavitação no trecho não-aerado do escoamento. Três calhas escalonadas com declividade 1V:0,75H e alturas de degraus iguais a 0,03 m; 0,06 m e 0,09 m foram projetadas e construídas para a investigação. As amostras de pressões registradas com transmissores de pressão a 50 Hz e duração de 3minutos e 12 horas possibilitaram caracterizar o campo de pressão identificando zonas críticas, bem como, avaliando o comportamento estatístico dessas solicitações. As maiores flutuações de pressões foram registradas nas extremidades externas dos degraus e na seção de afloramento da camada limite, chegando a valores negativos de 0,69 vezes a distância vertical entre a crista e a seção analisada. Determinaram-se freqüências dominantes compreendidas entre 7-18 Hz, com valores máximos situados nos patamares dosdegraus. Os números adimensionais de Strouhal, calculados com as freqüências predominantes e as profundidades equivalente do escoamento, diminuíram de 0,40 a 0,04 no sentido do fluxo. Quanto aos limites de incipiência à cavitação, as vazões especificas mais restritivas ao emprego de vertedouros em degraus ficaram na faixa entre 11,3 e 15,6 m²/s com velocidades médias da ordem de 17 m/s, obtidas para a seção de afloramento da camada limite. / Hydraulic researchers have to accomplish the technological and construction materials innovations to new security design project criteria compatible to low costs requirement. At 70’s years, with the development of the Roller Compact Concrete (RCC), the use of stepped spillways has become an attractive solution for gravity dams. In steeply sloping stepped spillways, the large step macro-roughness promotes the occurrence of negative pressures on the step cavity, particularly near the external edge of the vertical step face. Consequently one may expect the occurrence of sub-atmospheric pressure conditions capable to induce cavitation for velocities lower than those observed in smooth chute spillways. Predicting cavitation damage is more complex than predicting cavitation inception. Flow conditions leading to the onset of cavitation are generally conservative in predicting damage. The severity of damage that may be expected is related both to intensity of cavitation and time of exposure. There is still no consensus on the maximum unit discharge or flow velocity which assures cavitation safe design of stepped spillways.The study carried through in the Institute of Hydraulic Research (UFRGS - Brazil), had the main goal: described, characterized and modeled experimental measurements of hydrodynamic pressures on the faces of the steps and established limits of incipient cavitation. Three stepped chutes with declivity 1V:0.75H and 0.03 m; 0.06 m and 0.09 m steps heights were projected. The samples of pressures were registered with pressure transmitters with 50 Hz and 3 minutes duration. Long-duration test were also conducted (12 hours sample size) that permitted characterize the pressure field, identifying critical zones, as well as, evaluating its statistical behaviour. The largest fluctuating pressures had been registered in the outer corner on the steps and at the inception point of air entrainment. At this last position can be expected negative pressure values close to 0.69 times the vertical distance between the crest and the analyzed section. The dominant frequencies found varied between 7-18 Hz. The dimensionless number of Strouhal calculated with the predominant frequencies and the clear equivalent depth, had diminished of 0.40 the 0.04 in the direction of the flow. The pressure measurements indicated specific discharge between 11.3-15.6 m²/s and average velocity in order of 17 m/s to inception cavitation process near the inception point.
22

Campo de pressões : condições de incipiência à cavitação em vertedouros em degraus com declividade 1V:0,75H

Gomes, Jaime Federici January 2006 (has links)
As expectativas dinâmicas de um mundo de inovações tecnológicas, consubstanciados por explorações menos agressivas ao meio ambiente, dirigidas a um mercado consumista emergente, representam desafios para soluções de problemas de engenharia dirigidos para diversos segmentos da sociedade. Com o desenvolvimento do concreto compactado com rolo (CCR), a partir dos anos 70, o emprego de vertedouros em degraus em barragens de gravidade tornou-se uma solução atrativa, visto que, proporciona, simultaneamente, o aumento da dissipação da energia do escoamento e a redução do tempo e dos custos de implantação dessas obras. Atualmente, têm-se usado como restrições ao seu emprego de vertedouros em degraus valores máximos de vazões específicas que, sem um limite consensual, vêm tolhendo suas potencialidades. A macrorugosidade da calha acelera o processo de aeração do escoamento, se comparado com um vertedouro de soleira lisa, protegendo, para a zona aerada, os degraus contra erosão por cavitação. Entretanto, para o trecho não aerado do escoamento, existem riscos desse processo se estabelecer. As descontinuidades da fronteira sólida propiciam a sucessiva separação da camada limite nos cantos externos dos degraus. Nessa região são geradas pressões muito baixas. O presente estudo, realizado no Instituto de Pesquisas Hidráulicas, objetivou, através de medições experimentais, descrever, caracterizar e modelar pressões hidrodinâmicas nas soleiras dos degraus, estabelecendo limites para incipiência à cavitação no trecho não-aerado do escoamento. Três calhas escalonadas com declividade 1V:0,75H e alturas de degraus iguais a 0,03 m; 0,06 m e 0,09 m foram projetadas e construídas para a investigação. As amostras de pressões registradas com transmissores de pressão a 50 Hz e duração de 3minutos e 12 horas possibilitaram caracterizar o campo de pressão identificando zonas críticas, bem como, avaliando o comportamento estatístico dessas solicitações. As maiores flutuações de pressões foram registradas nas extremidades externas dos degraus e na seção de afloramento da camada limite, chegando a valores negativos de 0,69 vezes a distância vertical entre a crista e a seção analisada. Determinaram-se freqüências dominantes compreendidas entre 7-18 Hz, com valores máximos situados nos patamares dosdegraus. Os números adimensionais de Strouhal, calculados com as freqüências predominantes e as profundidades equivalente do escoamento, diminuíram de 0,40 a 0,04 no sentido do fluxo. Quanto aos limites de incipiência à cavitação, as vazões especificas mais restritivas ao emprego de vertedouros em degraus ficaram na faixa entre 11,3 e 15,6 m²/s com velocidades médias da ordem de 17 m/s, obtidas para a seção de afloramento da camada limite. / Hydraulic researchers have to accomplish the technological and construction materials innovations to new security design project criteria compatible to low costs requirement. At 70’s years, with the development of the Roller Compact Concrete (RCC), the use of stepped spillways has become an attractive solution for gravity dams. In steeply sloping stepped spillways, the large step macro-roughness promotes the occurrence of negative pressures on the step cavity, particularly near the external edge of the vertical step face. Consequently one may expect the occurrence of sub-atmospheric pressure conditions capable to induce cavitation for velocities lower than those observed in smooth chute spillways. Predicting cavitation damage is more complex than predicting cavitation inception. Flow conditions leading to the onset of cavitation are generally conservative in predicting damage. The severity of damage that may be expected is related both to intensity of cavitation and time of exposure. There is still no consensus on the maximum unit discharge or flow velocity which assures cavitation safe design of stepped spillways.The study carried through in the Institute of Hydraulic Research (UFRGS - Brazil), had the main goal: described, characterized and modeled experimental measurements of hydrodynamic pressures on the faces of the steps and established limits of incipient cavitation. Three stepped chutes with declivity 1V:0.75H and 0.03 m; 0.06 m and 0.09 m steps heights were projected. The samples of pressures were registered with pressure transmitters with 50 Hz and 3 minutes duration. Long-duration test were also conducted (12 hours sample size) that permitted characterize the pressure field, identifying critical zones, as well as, evaluating its statistical behaviour. The largest fluctuating pressures had been registered in the outer corner on the steps and at the inception point of air entrainment. At this last position can be expected negative pressure values close to 0.69 times the vertical distance between the crest and the analyzed section. The dominant frequencies found varied between 7-18 Hz. The dimensionless number of Strouhal calculated with the predominant frequencies and the clear equivalent depth, had diminished of 0.40 the 0.04 in the direction of the flow. The pressure measurements indicated specific discharge between 11.3-15.6 m²/s and average velocity in order of 17 m/s to inception cavitation process near the inception point.
23

Computational investigation of skimming flow on stepped spillways using the smoothed particle hydrodynamics method

Husain, Sarhang Mustafa January 2013 (has links)
No description available.
24

Vertedor de superfície e escoamento sob comportas. / Spillway and draining under floodgates.

Ivan Juncioni de Arauz 12 August 2005 (has links)
Os vertedores são estruturas hidráulicas construídas para controlar o nível d’água do reservatório, permitindo a passagem das vazões escoadas com a máxima eficiência possível sem provocar problemas à estrutura. Para atingir este objetivo, as condições de aproximação do escoamento à estrutura e a forma geométrica do perfil vertente são muito importantes. O controle da soleira por comportas provoca uma mudança significativa nas condições de escoamento sobre o perfil vertente. O posicionamento e a forma da comporta tem forte influência no comportamento do coeficiente de vazão e nas pressões sobre a soleira. A formação de vórtice é um fenômeno indesejável que pode ocorrer quando a operação da comporta é parcial, prejudicando a capacidade de vazão e provocando vibrações na estrutura. Este trabalho apresenta uma abordagem teórica sobre o assunto vertedor de superfície e escoamento sob comportas, apresentando resultados de diferentes estudos para melhor compreensão do funcionamento do vertedor. / Spillways are hydraulic structures constructed to control the water level of the reservoir, allowing the overflows with the maximum possible efficiency without provoking problems to the structure. The approach flow pattern to the structure and the geometric form of the spillway profile are basic importance. The control of the spillway by the floodgates modifies the draining conditions. The positioning and the form of the gate have strong influence in the behavior of the discharge coefficient and the pressures on the surface profile. A vortex formation is an undesirable phenomenon that it can occur when the operation of the floodgate is partial, reducing the discharge coefficient and produce vibrations in structure. This work presents a theoretical approach about flow over spillway and under of the partial opening of the floodgate, presenting results of different studies for better understanding the function of the spillway.
25

Campo de pressões : condições de incipiência à cavitação em vertedouros em degraus com declividade 1V:0,75H

Gomes, Jaime Federici January 2006 (has links)
As expectativas dinâmicas de um mundo de inovações tecnológicas, consubstanciados por explorações menos agressivas ao meio ambiente, dirigidas a um mercado consumista emergente, representam desafios para soluções de problemas de engenharia dirigidos para diversos segmentos da sociedade. Com o desenvolvimento do concreto compactado com rolo (CCR), a partir dos anos 70, o emprego de vertedouros em degraus em barragens de gravidade tornou-se uma solução atrativa, visto que, proporciona, simultaneamente, o aumento da dissipação da energia do escoamento e a redução do tempo e dos custos de implantação dessas obras. Atualmente, têm-se usado como restrições ao seu emprego de vertedouros em degraus valores máximos de vazões específicas que, sem um limite consensual, vêm tolhendo suas potencialidades. A macrorugosidade da calha acelera o processo de aeração do escoamento, se comparado com um vertedouro de soleira lisa, protegendo, para a zona aerada, os degraus contra erosão por cavitação. Entretanto, para o trecho não aerado do escoamento, existem riscos desse processo se estabelecer. As descontinuidades da fronteira sólida propiciam a sucessiva separação da camada limite nos cantos externos dos degraus. Nessa região são geradas pressões muito baixas. O presente estudo, realizado no Instituto de Pesquisas Hidráulicas, objetivou, através de medições experimentais, descrever, caracterizar e modelar pressões hidrodinâmicas nas soleiras dos degraus, estabelecendo limites para incipiência à cavitação no trecho não-aerado do escoamento. Três calhas escalonadas com declividade 1V:0,75H e alturas de degraus iguais a 0,03 m; 0,06 m e 0,09 m foram projetadas e construídas para a investigação. As amostras de pressões registradas com transmissores de pressão a 50 Hz e duração de 3minutos e 12 horas possibilitaram caracterizar o campo de pressão identificando zonas críticas, bem como, avaliando o comportamento estatístico dessas solicitações. As maiores flutuações de pressões foram registradas nas extremidades externas dos degraus e na seção de afloramento da camada limite, chegando a valores negativos de 0,69 vezes a distância vertical entre a crista e a seção analisada. Determinaram-se freqüências dominantes compreendidas entre 7-18 Hz, com valores máximos situados nos patamares dosdegraus. Os números adimensionais de Strouhal, calculados com as freqüências predominantes e as profundidades equivalente do escoamento, diminuíram de 0,40 a 0,04 no sentido do fluxo. Quanto aos limites de incipiência à cavitação, as vazões especificas mais restritivas ao emprego de vertedouros em degraus ficaram na faixa entre 11,3 e 15,6 m²/s com velocidades médias da ordem de 17 m/s, obtidas para a seção de afloramento da camada limite. / Hydraulic researchers have to accomplish the technological and construction materials innovations to new security design project criteria compatible to low costs requirement. At 70’s years, with the development of the Roller Compact Concrete (RCC), the use of stepped spillways has become an attractive solution for gravity dams. In steeply sloping stepped spillways, the large step macro-roughness promotes the occurrence of negative pressures on the step cavity, particularly near the external edge of the vertical step face. Consequently one may expect the occurrence of sub-atmospheric pressure conditions capable to induce cavitation for velocities lower than those observed in smooth chute spillways. Predicting cavitation damage is more complex than predicting cavitation inception. Flow conditions leading to the onset of cavitation are generally conservative in predicting damage. The severity of damage that may be expected is related both to intensity of cavitation and time of exposure. There is still no consensus on the maximum unit discharge or flow velocity which assures cavitation safe design of stepped spillways.The study carried through in the Institute of Hydraulic Research (UFRGS - Brazil), had the main goal: described, characterized and modeled experimental measurements of hydrodynamic pressures on the faces of the steps and established limits of incipient cavitation. Three stepped chutes with declivity 1V:0.75H and 0.03 m; 0.06 m and 0.09 m steps heights were projected. The samples of pressures were registered with pressure transmitters with 50 Hz and 3 minutes duration. Long-duration test were also conducted (12 hours sample size) that permitted characterize the pressure field, identifying critical zones, as well as, evaluating its statistical behaviour. The largest fluctuating pressures had been registered in the outer corner on the steps and at the inception point of air entrainment. At this last position can be expected negative pressure values close to 0.69 times the vertical distance between the crest and the analyzed section. The dominant frequencies found varied between 7-18 Hz. The dimensionless number of Strouhal calculated with the predominant frequencies and the clear equivalent depth, had diminished of 0.40 the 0.04 in the direction of the flow. The pressure measurements indicated specific discharge between 11.3-15.6 m²/s and average velocity in order of 17 m/s to inception cavitation process near the inception point.
26

Design and Evaluation of Stepped Spillways for High Dams

Rau, Jeffrey Scott 01 May 1994 (has links)
The purpose of this research was to investigate the hydraulic performance of stepped spillways. A thorough investigation was made of all printed material on stepped spillways, and a summary of this material is presented in the text. Data from experiments in the laboratory were used to develop a design procedure for stepped spillways and hydraulic jump stilling basins. The experimental study was conducted at Utah State University - Utah Water Research Laboratory in Logan, Utah. Four models were built and tested in the laboratory under various flowrates. The crest of the model spillway was constructed in the shape of a standard USBR nappe-shaped crest. Small steps were fitted to the crest so that the envelope of their tips just intersected the crest profile. These small steps allowed a smooth transition of the flow from the nappe-shaped crest to the constant slope region. Two slopes were tested in the research: 0.7H:1.0V and 0.5H:1.0V. At each of these slopes two sizes of steps were tested. Steps did not very in size down the face of the model, although step sizes varied on the different models. The model height and steps tested were for a dam with a prototype height of over 67 feet and steps in the 1-2 foot range. Diagrams and pictures of the four models tested are included in the text and appendix. Findings from the research showed that given a ratio of step height over critical depth (0.1201.897, the energy dissipation will remain in the 90% region, although there might be problems with the flow leaping away from the structure. Data on the models were slightly scattered, but all of the data from the four models agree to one energy loss graph. Support for these data showed a nearly perfect correlation in the downstream conjugate depths on all four models at similar flowrates. By using data obtained from the models and literature, a design process with guidelines for designing a stepped spillway is presented. This process includes crest design and step displacement in the transition region, approximate step size, and approximate slope necessary for adequate operation of the stepped spillway. By taking data collected from the models, and data from USBR design manuals for smooth spillways, a spreadsheet design process was created that compared the size of stilling basins required using either a smooth spillway or a stepped one. Results showed that given a unit flowrate range of 15 cfs/ft to 140 cfs/ft and spillway height of approximately 100 ft, the stilling basin volume was reduced by 62% to 43% respectively. This size reduction can translate to a considerable cost savings in prototype construction. This study, along with data from other researchers, has proven that a stepped spillway can greatly increase the amount of energy dissipation over that achieved on a standard smooth face spillway. The stepped concept can be used as an excellent energy dissipator and in some cases can totally remove the need for any type of dissipator at the toe of the spillway.
27

Considerações sobre a hidráulica de vertedores em degraus: metodologias adimensionais para pré-dimensionamento / Considerations about the hydraulic of stepped spillways: nondimensional methodologies for preliminary design

Simões, André Luiz Andrade 11 June 2008 (has links)
Neste trabalho apresenta-se uma avaliação do estado da arte de aspectos hidráulicos relacionados aos vertedores em degraus submetidos aos diferentes regimes de escoamento. Em uma segunda parte, é sugerida uma metodologia adimensional e simplificada para o pré-dimensionamento do comprimento de bacias de dissipação por ressalto hidráulico, além de uma abordagem conceitual voltada ao escoamento sobre um degrau. Entre os tópicos tratados na avaliação do estado da arte, pode-se citar, por exemplo, a dissipação de energia promovida pelos degraus, o risco de cavitação, a aeração do escoamento, o uso de aeradores de fundo e geometrias não convencionais. Quanto à metodologia desenvolvida, fundamentada na segunda lei do movimento de Newton associada à equação de Darcy-Weisbach, apresenta-se algumas comparações com dados experimentais de diferentes pesquisadores, além de exemplos de aplicação. Foi possível concluir, com a avaliação do estado da arte, que há um interesse crescente pelo conhecimento das características hidráulicas de vertedores em degraus. Através da metodologia desenvolvida, graças às comparações com dados experimentais de diferentes pesquisadores, foi possível concluir que não há um consenso absoluto sobre a magnitude do fator de resistência de Darcy-Weisbach. Com os exemplos de aplicação apresentados, notou-se que para um mesmo problema, o uso de diferentes métodos pode conduzir a projetos significativamente diferentes. / This work presents a state-of-the-art evaluation of aspects related hydraulic to stepped spillways submitted to the different flow regimes. In a second part, it is suggested a dimensionless and simplified methodology for preliminary design of the stilling basin length, besides a conceptual approach related to the free fall hydraulics. Among topics treaties in the state-of-the-art evaluation, it can cite, for example, the energy dissipation promoted by the steps, incipient cavitation, the air entrainment, the use of bottom aerator and unconventional geometries. Regarding the developed methodology, based in the Newton\'s law of motion associate to Darcy-Weisbach equation, it presents some comparisons with experimental data of different researchers, besides application examples. It was possible to conclude, with the state-of-the-art evaluation, that there is an increasing interest for hydraulics characteristic of stepped spillways knowledge. Through the developed methodology, after comparisons with experimental data of different researchers, was possible to conclude that there is not an absolute consensus about the Darcy-Weisbach friction factor magnitude. With the application examples, it noticed that for a same problem, the different methods use can lead for significantly different designs.
28

Experimental Study of Air-Water Flow Properties on Low-Gradient Stepped Cascades

Toombes, Luke Unknown Date (has links)
Stepped cascades are recognised for both aeration potential and energy dissipation, and have been employed in hydraulic structures for over 3,500 years. Yet little detailed information exists on their performance, especially pertaining to low-gradient cascades. This study presents a detailed investigation of both the macro and micro-scale flow properties on a low-gradient cascade (3.4º slope). Research is conducted on two large-size physical models: a 24m long multi-step cascade (10× 2.4m long steps), and a single-step model with identical step height and length. The large size of the model allows near full-scale data acquisition under controlled flow conditions, minimising potential scale effects. The study comprises three distinct components: 1. A global investigation of the general flow properties of nappe flow on a low-gradient, multi-step cascade. Unforeseen three-dimensional characteristics of the flow, including supercritical shockwaves and sidewall standing-waves downstream of nappe impact, are identified and examined by the study. Although comparable to similar phenomena at channel bends and expansions, these have not been previously described on stepped cascades. Energy dissipation on the cascade is investigated, and is found to be over twice that observed for a smooth chute of similar gradient. 2. A complete characterisation of the air-water structure of flow in a nappe regime. Significant outcomes of the analysis include: ⊕ Air-concentration Distribution: The air-concentration distribution at the lower nappe of the free-falling jet shows good agreement with an analytical solution of the diffusion equation. The experimental results from the study, and a reanalysis of existing data, indicate a distinct relationship between the turbulent diffusivity in the shear layer and distance from the step brink. This contradicts earlier investigations that assumed constant diffusivity. Strong aeration of the flow, with a large volume of spray, occurs downstream of the nappe impact. Depth-averaged air concentrations of 40% to 50% are observed within the spray region, decreasing towards the downstream end of the step. ⊕ Velocity Distribution: A theoretical analysis of the momentum transfer process imparts an improved understanding of the momentum transfer and velocity redistribution within the free-falling jet. An analytical solution based on twodimensional wake flow is developed, superseding existing solutions based upon a monophase free-mixing layer. ⊕ Bubble-frequency Distribution: A quasi-parabolic relationship between bubble frequency and time-average air concentration across a cross-section is observed. A theoretical explanation for the parabolic relationship is developed, and two correction factors are introduced to provide a better representation of the experimental data. ⊕ Air-bubble and Water-droplet Size Distributions: Chord-length distributions are compared with standard probability distributions, showing good agreement with standard Weibull, gamma and log-normal probability distributions within various regions of the flow on the step. A computer model is developed to model interaction between a bubbly transition from water to air and fluctuations of the free surface. 3. A parallel investigation of the oxygen aeration efficiency of a stepped cascade. Measured air-water property data is used to calculate the air-water interface area in bubbly flow, and to estimate the theoretical aeration efficiency of the stepped cascade based upon the integration of the mass transfer equation. The aeration performance of the stepped cascade model is also measured experimentally in terms of dissolved oxygen content. This analysis allows a unique, successful comparison of experimental dissolved oxygen measurements with the numerical integration of the mass transfer equation.
29

Determinação de critérios de dimensionamento de soleira terminal em bacia de dissipação a jusante de vertedouro em degraus

Conterato, Eliane January 2014 (has links)
Vertedouros em degraus têm se tornado uma boa opção em barragens pela facilidade de construção e, principalmente, por apresentar uma dissipação significativa de energia ao longo de sua calha, o que faz com que a parcela de energia a ser dissipada por ressalto hidráulico a jusante da barragem diminua, ocasionando uma significativa redução nas dimensões da estrutura da bacia de dissipação. A aplicação de soleira terminal em bacias de dissipação provoca uma melhor distribuição das velocidades e um melhor comportamento da flutuação de pressões ao longo da bacia e a jusante, aumentando assim seu desempenho na dissipação de energia. A combinação destas duas formas de dissipação (vertedouro em degraus e bacia de dissipação com soleira terminal) pode ser utilizada como uma solução econômica e segura, entretanto, o dimensionamento dessas estruturas esbarra na falta de critérios e informações, principalmente quanto ao tamanho e posição ideal para o projeto de uma soleira terminal. No presente trabalho foram analisados os dados de pressões médias e flutuações de pressões no interior da bacia e a jusante da soleira terminal, sendo apresentadas metodologias para dimensionamento de tamanho e para posicionamento de uma soleira em função do número de Froude da entrada do ressalto hidráulico. Também está sendo apresentada uma metodologia para análise das pressões médias em bacia do tipo I (sem soleira), além de uma comparação do comportamento dos esforços em bacia com soleira e sem soleira, com vertedouro em degraus e vertedouro de calha lisa. Os dados utilizados foram obtidos em modelo experimental, construído no Laboratório de Obras Hidráulicas (LOH) do Instituto de Pesquisas Hidráulicas (IPH-UFRGS), através de transdutores de pressões fixados junto ao fundo do canal de ensaios para diversas vazões, considerando, além de bacia tipo I, diferentes tamanhos de soleira terminal, situadas em diferentes posições do canal. / Stepped spillways have become a good option in dams for ease of construction and especially to present a significant dissipation of energy throughout the spillway chute, which causes that the parcel of energy to be dissipated by hydraulic jump downstream of dam decreases, causing a significant reduction in the dimensions of the stilling basin structure. The application of end sill in stilling basins causes a better distribution of speeds and better behavior of the fluctuation of pressure along the basin and downstream, thus increasing their performance in energy dissipation. The combination of these two forms of dissipation (stepped spillway and stilling basin with end sill) can be used as an economical and safe solution, however, the sizing of these structures hindered by a lack of criteria and information, especially regarding the ideal size and position for design of an end sill. In this study the data mean pressures and pressure fluctuations within the basin and downstream of the end sill were analyzed, being presented methodologies for design the size and position of a sill as a function of the Froude number of the input of the hydraulic jump. A methodology for analysis of mean pressure in type I basin (without sill) is also being presented, and a comparison of the behavior of efforts in basin with and without end sill, with stepped spillway and flat spillway chute. The data were obtained in an experimental model built at the Laboratory of Hydraulic Works (LOH) at the Institute of Hydraulic Research (IPH-UFRGS), through pressure transducers attached at the bottom of the test channel for various flow rates, considering, in addition of type I basin, different sizes of end sill at different positions of the channel.
30

Determinação de critérios de dimensionamento de soleira terminal em bacia de dissipação a jusante de vertedouro em degraus

Conterato, Eliane January 2014 (has links)
Vertedouros em degraus têm se tornado uma boa opção em barragens pela facilidade de construção e, principalmente, por apresentar uma dissipação significativa de energia ao longo de sua calha, o que faz com que a parcela de energia a ser dissipada por ressalto hidráulico a jusante da barragem diminua, ocasionando uma significativa redução nas dimensões da estrutura da bacia de dissipação. A aplicação de soleira terminal em bacias de dissipação provoca uma melhor distribuição das velocidades e um melhor comportamento da flutuação de pressões ao longo da bacia e a jusante, aumentando assim seu desempenho na dissipação de energia. A combinação destas duas formas de dissipação (vertedouro em degraus e bacia de dissipação com soleira terminal) pode ser utilizada como uma solução econômica e segura, entretanto, o dimensionamento dessas estruturas esbarra na falta de critérios e informações, principalmente quanto ao tamanho e posição ideal para o projeto de uma soleira terminal. No presente trabalho foram analisados os dados de pressões médias e flutuações de pressões no interior da bacia e a jusante da soleira terminal, sendo apresentadas metodologias para dimensionamento de tamanho e para posicionamento de uma soleira em função do número de Froude da entrada do ressalto hidráulico. Também está sendo apresentada uma metodologia para análise das pressões médias em bacia do tipo I (sem soleira), além de uma comparação do comportamento dos esforços em bacia com soleira e sem soleira, com vertedouro em degraus e vertedouro de calha lisa. Os dados utilizados foram obtidos em modelo experimental, construído no Laboratório de Obras Hidráulicas (LOH) do Instituto de Pesquisas Hidráulicas (IPH-UFRGS), através de transdutores de pressões fixados junto ao fundo do canal de ensaios para diversas vazões, considerando, além de bacia tipo I, diferentes tamanhos de soleira terminal, situadas em diferentes posições do canal. / Stepped spillways have become a good option in dams for ease of construction and especially to present a significant dissipation of energy throughout the spillway chute, which causes that the parcel of energy to be dissipated by hydraulic jump downstream of dam decreases, causing a significant reduction in the dimensions of the stilling basin structure. The application of end sill in stilling basins causes a better distribution of speeds and better behavior of the fluctuation of pressure along the basin and downstream, thus increasing their performance in energy dissipation. The combination of these two forms of dissipation (stepped spillway and stilling basin with end sill) can be used as an economical and safe solution, however, the sizing of these structures hindered by a lack of criteria and information, especially regarding the ideal size and position for design of an end sill. In this study the data mean pressures and pressure fluctuations within the basin and downstream of the end sill were analyzed, being presented methodologies for design the size and position of a sill as a function of the Froude number of the input of the hydraulic jump. A methodology for analysis of mean pressure in type I basin (without sill) is also being presented, and a comparison of the behavior of efforts in basin with and without end sill, with stepped spillway and flat spillway chute. The data were obtained in an experimental model built at the Laboratory of Hydraulic Works (LOH) at the Institute of Hydraulic Research (IPH-UFRGS), through pressure transducers attached at the bottom of the test channel for various flow rates, considering, in addition of type I basin, different sizes of end sill at different positions of the channel.

Page generated in 0.3963 seconds