Spelling suggestions: "subject:"steel, high strength."" "subject:"steel, igh strength.""
1 |
Effect of microstructure on static and dynamic mechanical properties of high strength steelsQu, Jinbo, 1971- January 2007 (has links)
The high speed deformation behavior of a commercially available dual phase (DP) steel was studied by means of split Hopkinson bar apparatus in shear punch (25m/s) and tension (1000s-1) modes with an emphasis on the influence of microstructure. The cold rolled sheet material was subjected to a variety of heat treatment conditions to produce several different microstructures, namely ferrite plus pearlite, ferrite plus bainite and/or acicular ferrite, ferrite plus bainite and martensite, and ferrite plus different fractions of martensite. Static properties (0.01mm/s for shear punch and 0.001s -1 for tension) of all the microstructures were also measured by an MTS hydraulic machine and compared to the dynamic properties. The effects of low temperature tempering and bake hardening were investigated for some ferrite plus martensite microstructures. In addition, two other materials, composition designed as high strength low alloy (HSLA) steel and transformation induced plasticity (TRIP) steel, were heat treated and tested to study the effect of alloy chemistry on the microstructure and property relationship. / A strong effect of microstructure on both static and dynamic properties and on the relationship between static and dynamic properties was observed. According to the variation of dynamic factor with static strength, three groups of microstructures with three distinct behaviors were identified, i.e. classic dual phase (ferrite plus less than 50% martensite), martensite-matrix dual phase (ferrite plus more than 50% martensite), and non-dual phase (ferrite plus non-martensite). Under the same static strength level, the dual phase microstructure was found to absorb more dynamic energy than other microstructures. It was also observed that the general dependence of microstructure on static and dynamic property relationship was not strongly influenced by chemical composition, except the ferrite plus martensite microstructures generated by the TRIP chemistry, which exhibited much better dynamic factor values. This may suggest that solid solution strengthening should be more utilized in the design of crashworthy dual phase steels.
|
2 |
Effect of microstructure on static and dynamic mechanical properties of high strength steelsQu, Jinbo, 1971- January 2007 (has links)
No description available.
|
3 |
The inelastic behavior of flexural members fabricated from high performance steel /Green, Perry Stanton, January 2000 (has links)
Thesis (Ph. D.)--Lehigh University, 2000. / Includes vita. Includes bibliographical references (leaves 681-688).
|
4 |
Ductile tearing of high-toughness steel members /Gentilcore, Michael L., January 1996 (has links)
Thesis (Ph. D.)--Lehigh University, 1996. / Includes vita. Bibliography: leaves 215-219.
|
5 |
Effects of alloying elements upon austenite decomposition in high strength low alloy steels /Chen, Jhewn-Kuang, January 1992 (has links)
Thesis (M.S.)--Virginia Polytechnic Institute and State University, 1992. / Vita. Abstract. Includes bibliographical references (leaves 52-54). Also available via the Internet.
|
6 |
Spot friction welding of ultra high-strength automotive sheet steel / /Sederstrom, Jack Hunter, January 2007 (has links) (PDF)
Thesis (M.S.)--Brigham Young University. School of Technology, 2007. / Includes bibliographical references (p. 57-59).
|
7 |
High performance steel girders with tubular flanges /Kim, Bong-Gyun, January 2005 (has links)
Thesis (Ph. D.)--Lehigh University, 2005. / Includes vita. In two parts. Includes bibliographical references.
|
8 |
Estudo das propriedades mecânicas em união de aços dissimilares soldadas pelo processo a plasma e a laser /Silva, Deivid Ferreira da, 1978. January 2018 (has links)
Orientador: Antonio Jorge Abdalla / Banca: Marcelo dos Santos Pereira / Banca: José Vitor Candido dos Santos / Banca: Leonardo Fanton / Banca: Rafael Humberto Mota de Siqueira / Resumo: O objetivo deste trabalho é avaliar e comparar a resistência mecânica da união de aços dissimilares, o aço Maraging 300 com o aço 300M-ESR pelos processos de soldagens autógenas a Plasma (Plasma Arc Welding - PAW) e a Laser (Laser Beam Welding - LBW). As juntas foram submetidas à avaliação da resistência mecânica através de ensaios de tração e de dureza Vickers (HV) no cordão de solda e zona termicamente afetada. Foram também realizadas análises químicas e metalográficas das juntas soldadas, correlacionando a microestrutura com as propriedades observadas. Em ambos os processos foram aplicados tratamentos térmicos antes e após as soldagens, com o objetivo de endurecer os materiais e procurando aproximar a dureza de ambos os aços e da zona fundida (ZF) e zona termicamente afetada pelo calor (ZTA). Foram realizados vários testes com tempos e temperaturas para se definir quais eram os melhores tratamentos térmicos adotados para a equalização das propriedades mecânicas. Os tratamentos térmicos aplicados após a solda mostraram-se convenientes para o nivelamento dos valores das durezas, somente exibindo poucas perdas nas ZTAs dos aços Maraging. Com a aplicação destes tratamentos também foi possível notar uma equalização nas resistências à tração, em torno de 1300 MPa e aumentos consideráveis das mesmas, comparado com a mesma condição sem tratamento. As soldas mostraram-se eficientes para a união das chapas, porém, em algumas situações da soldagem a Laser, apresentou pequenas falhas,... (Resumo completo, clicar acesso eletrônico abaixo) / Abstract: The objective of this work is to evaluate and compare the mechanical strength of welded joints made of the dissimilar steels such as Maraging 300 steel with 300M-ESR steel by the autogenous Plasma Arc Welding (PAW) and Laser welding process (LBW). The joints were submitted to the mechanical strength evaluation by tensile test and hardness Vickers (HV) at the weld bead and thermally affected zone. Chemical analysis and metallographic analysis of the welded joints were also performed, correlating the microstructure observed with the properties. In both processes, heat treatments were applied before and after welding, with the objective of at harden the materials and seeking to approximate the hardness of both steels and the fusion zone and heat affected zone. Several tests were carried using different times and temperatures to determine which ones were the best heat treatments to be adopted aiming the equalization of mechanical properties. The heat treatments applied after welding proved to be convenient for the leveling of the hardness values, only showing few losses in the HAZs of the Maraging steels. Applying of these treatments, it was also possible to note the equalization of tensile strengths, around 1300 MPa and considerable increases of the same, compared to the same condition without treatment. The welds showed to be efficient for the joining of the plates, however, in some situations the Laser welding presented small flaws, such as presence of pores, in the weld beads... (Complete abstract click electronic access below) / Doutor
|
9 |
The economical use of high performance steel in slab-on-steel stringer bridge designClingenpeel, Beth F. January 2001 (has links)
Thesis (M.S.)--West Virginia University, 2001. / Title from document title page. Document formatted into pages; contains xiii, 148 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 136-137).
|
10 |
Fretting fatigue damage accumulation and crack nucleation in high strength steelsPape, John Andrew 05 1900 (has links)
No description available.
|
Page generated in 0.0883 seconds