The Coeur d'Alene district in northern Idaho is a world class Pb-Ag mesothermal vein system that has produced about 360 million ounces of silver, lead, and zinc since the 1880s. Despite the long history of exploration and production, the district does not have a predictive model for exploration based on a sound understanding of structural controls on the silver ore deposits; this is certainly the case for the Sunshine Mine and surrounding area. Fault kinematic history in the district shows a regional scale fault system reactivated over time with dextral, sinistral, and dip-slip displacement. The fault system is superimposed on regional deformation fabrics that were examined for this study in the Sunshine Mine area. Cleavage sets observed in the Sunshine mine area, distinguished by orientation and superposition relationships, are consistent with the findings of Smith (2004) which defined cleavage sets referred to as S1, S2, and S3. Two additional deformation fabrics that appear spatially tied to fault zones formed between development of cleavages S2 and S3. The multiple cleavages, fault zones, and their intersections are interpreted to act as pathways for hydrothermal fluids associated with vein formation and silver ore deposition. Thin section kinematic analysis of vein and shear zone samples defined a dip-slip sense of shear associated with the Sterling vein. Electron Backscatter Diffraction (EBSD) analysis of vein and shear zone samples failed to define a lattice preferred crystallographic orientation that defined shear sense. Similarly, cathodoluminescence (CL) analysis of thin section textures failed to define a dominant shear sense and fault kinematics. Nevertheless, additional study using these techniques is warranted. Both field observation and thin section analysis demonstrate a direct relationship between shear zones, veins, and mineralization potential, clarifying the need for detailed fault maps for the Sunshine Mine area and Coeur d'Alene district.

The Little Grand Wash normal fault near Green River, eastern Utah, hosts a series of naturally occurring CO₂ seeps in the form of active and extinct CO₂-charged springs distributed along the fault zone. I have studied the association of fault structure with CO₂-related alteration as an analogue for the long-term (1,000- to 10,000-year) effects of leakage through faults in CO₂ sequestration reservoirs. Structure and alteration in a portion of the Little Grand Wash fault zone were mapped at a 1:700 scale in order to determine the association of faulting with CO₂-related diagenesis. I combined structural and diagenetic mapping were combined with laboratory analyses of mineralogical, isotopic and textural changes in order to assess controls on the migration of CO₂ traveling up the fault and its effects on the fault itself. The fault zone is 200 m wide at its widest and contains 4-5 major subparallel fault segments that form multiple soft- and hard-linked relay ramps. The area includes a travertine deposit and related sandstone alteration: outcrop-visible coloration, porosity-occluding calcite cement and veins occasionally so abundant that they obliterate the rock fabric. Structural mapping shows that the travertine is located at an intersection of major fault segments constituting the hard link of a 450-meter-long relay ramp. Sandstone alteration is confirmed to be related to the CO₂ seep by mapping its distribution, which shows a decrease in concentration away from the travertine, and by the unique isotopic signature of calcite cement near the travertine. At distances greater than 25 m from the travertine intense alteration disappears, though scattered fault-subparallel veins and patchy, burial-related calcite cement remain. Intense alteration is limited to major fault overlaps and does not permeate the fault zone along its entire length, nor does it extend outside the zone. This indicates that rising CO₂-laden fluids do not flow uniformly through the entire fault zone, but that vertical flow is channeled at fault intersections. In thin section, porosity near the travertine has been extensively or completely occluded by calcite cement. Permeability in some conduit samples is less than 1 mD, three or four orders of magnitude lower than sandstone away from the travertine. In active CO₂ conduits, such reduction in porosity and permeability would occlude the preferred flow conduit and ultimately restrict upward flow of CO₂-charged water. X-ray diffraction detects small amounts of goethite and hematite and a decrease in chlorite-smectite in altered conduit sandstones. Calcite is abundant, but many authigenic minerals predicted by geochemical models of CO₂ influx into sandstone reservoirs are not observed, including kaolinite, aragonite, dolomite, siderite, ankerite or dawsonite. This difference between observed and predicted mineral occurrence likely results from differences in mineral kinetics between natural and laboratory systems. Prediction of leakage risk based on fault geometry improves the ability to assess the suitability of potential carbon sequestration reservoirs, many of which will be faulted. The point seep nature of leakage through a fault zone limits the amount of CO₂ that can escape over time and also enables targeted surface monitoring for CO₂ escape into the atmosphere--both critical for ensuring the effectiveness of injection projects and earning the trust necessary for carbon sequestration to gain public acceptance. The point seep nature of leakage also accelerates the rate at which conduits may seal through mineralization, since precipitation from a large volume of fluid is focused in a narrow conduit. The presence of multiple fossil and active seep locations along the Little Grand Wash fault, active at different times in the geologic past, indicates that cementation may be effective in sealing single conduits but that fault systems with complex geometry such as Little Grand Wash may continue to leak for a long period of time. / text

In the San Dimas district, on the western flank of the Sierra Madre Occidental, near the small town of Tayoltita, Durango, gold and silver epithermal ore deposits are mined from the complex Arana fault system. The structural relationships of the Tayoltita system are well-mapped, but their kinematic relationship to ore deposition is unclear. In plan view and in cross-section, the Arana system has a horsetail or wedge-shaped geometry. Subsurface mapping of slickenside striae as movement indicators suggest that the N13°W-striking Arana fault, forming the eastern boundary of the system, is a normal slip fault with at least 250 m of throw. Subsidiary system faults display normal separation with varying degrees of dextral horizontal separation (which is a function of fault orientation). Experimental modeling of the Arana system indicated that the system formed under simple shear as the σ₂ and σ₃ stress axes rotated in a subhorizontal plane about σ₁. Rotational strain caused the developing fault strands to rotate and to be captured by the Arana fault, forming the typical wedge-shaped geometry. Later, a more complex rotation of the three major stress axes enabled hydrothermal fluids to progressively mineralize faults, which had more northerly strikes, by a process similar to progressive strain. This is documented by mineral assemblages that record the instants of fault opening and by the lack of mineralization along the high-angle, northwest- striking faults.