No description available.

No description available.

Phosphorylcholine (PC) based phospholipid bilayers have been explored as coating materials for various substrates due to their inherent resistance to non-specific protein adsorption. Phospholipids have been used for coatings in capillary electrophoresis (CE) to suppress electroosmotic flow (EOF) and to obtain better separation of proteins. Here, a series of investigations geared towards developing highly stable phospholipid based biomimetic stationary phases for chromatographic separations was performed.Fluid phospholipid bilayers lack the desired chemical and physical stability to serve as long-term coatings. In this work, highly stable phospholipid coatings generated via crosslinking polymerization of bis-SorbPC monomers were investigated. Reproducible EOF and migration times for model proteins were obtained for coated capillaries that were kept at room temperature for up to two months. Furthermore, the effects of surfactants, pH and capillary inner diameter (i.d.) on the stability of the lipid coating were investigated.In an alternate approach, stabilized phospholipid coatings for capillary electrophoresis were investigated via formation of hybrid monolayers. The capillary surface was chemically modified with a cyano group followed by deposition of phospholipid monomers. In this approach, marked enhancements in coating stability were attained with commercially available reagents. The hybrid coating was utilized for protein separations and gave efficiencies comparable to non-stabilized lipid coated capillaries.Fused silica capillaries were modified with phospholipid bilayers that were chemically tuned to introduce specific affinity binding agents, while minimizing nonspecific protein adsorption to the capillary wall. The wall of fused silica was functionalized with DOGS-NTA-Ni2+ lipid to present binding sites inside the capillary for 6xHis-tagged proteins. Fluorescence microscopy and changes in electrophoretic mobility were used to follow the interaction of the model proteins with the functionalized silica surface.The structural similarity of lipid vesicles to cell membranes made them attractive in developing stationary phases for both liquid chromatography and capillary electrophoresis to study interactions between analytes and phospholipid membranes. Stabilized PLB coated silica microspheres were prepared via polymerization of lipid monomers and displayed enhanced stability to extended storage and organic solvent. These highly stable microspheres, while minimizing nonspecific protein adsorption, were also functionalized with DOGS-NTA-Ni2+ and effectively bind 6xHis-EGFP proteins.

Iron oxide nanoparticles are highly researched for their use in biomedical applications such as drug delivery, diagnosis, and therapy. The inherent biodegradable and biocompatible nanoparticle properties make them highly advantageous in nanomedicine. The magnetic properties of iron oxide nanoparticles make them promising candidates for magnetic fluid hyperthermia applications. Designing an efficient iron oxide nanoparticle for hyperthermia requires synthetic, surface functionalization, stability, and biological investigations. This research focused on the following three areas: optimizing synthesis conditions for maximum radiofrequency induced magnetic hyperthermia, designing a simple and modifiable surface functionalization method for specific or broad biological stability, and in vitro and in vivo testing of surface functionalized iron oxide nanoparticles in delivering effective hyperthermia or radiotherapy. The benzyl alcohol modified seed growth method of synthesizing iron oxide nanoparticles using iron acetylacetonate as an iron precursor was investigated to identify significant nanoparticle properties that effect radiofrequency induced magnetic hyperthermia. Investigation of this synthesis under atmospheric conditions revealed a combination of thermal decomposition and oxidation-reduction mechanisms that can produce nanoparticles with larger crystallite sizes and decreased size distributions. Nanoparticles were easily surface functionalized with (3-Glycidyloxypropyl)trimethoxysilane (GLYMO) without the need for organic-aqueous phase transfer methods. The epoxy ring on GLYMO facilitated post-modifications via a base catalyzed epoxy ring opening to obtain nanoparticles with different terminal groups. Glycine, serine, γ-aminobutryic acid (ABA), (S)-(-)-4-amino-2-hydroxybutyric acid (SAHBA), ethylenediamine, and tetraethylenepentamine were successful in modifying GLYMO coated-iron oxide nanoparticles to provide colloidal and varying biological stability while also allowing for further conjugation of chemotherapeutics or radiotherapeutics. The colloidal stability of cationic and anionic nanoparticles in several biologically relevant media was studied to address claims of increased cellular uptake for cationic nanoparticles. The surface functionalized iron oxide nanoparticles were investigated to determine effects on cellular uptake and viability. In vitro tests were used to confirm the ability of iron oxide nanoparticles to provide effective hyperthermia treatment. S-2-(4-Aminobenzyl)-1,4,7,10-tetraazacyclododecane tetraacetic acid (DOTA) was coupled to SAHBA and carboxymethylated polyvinyl alcohol surface functionalized iron oxide nanoparticles and radiolabeled with 177Lu. The capability of radiolabeled iron oxide nanoparticles for delivering radiation therapy to a U87MG murine orthotopic xenograft model of glioblastoma was initially investigated.

L'objectif de ce travail de recherche est la réalisation de dispositifs à base de nanofils de silicium, réalisés par la méthode des espaceurs. La synthèse des nanofils est effectuée à partir d'une couche de silicium polycristallin, déposée par la technique LPCVD (Low Pressure Chemical Vapor Deposition). Ces nanofils sont ensuite intégrés dans les dispositifs électroniques tels que des résistances ou des transistors réalisés suivant deux configurations différentes « bottom-gate » et « step-gate ». Les caractéristiques électriques de ces deux types de transistors ont mis en évidence des propriétés électriques suffisantes pour leur utilisation en tant que capteurs. Une simulation permet d'expliquer l'effet de l'apport de charges électriques à la surface des nanofils sur la concentration d'électrons dans la couche active. Les dispositifs sont tout d'abord utilisés pour la mesure du pH, et montrent une sensibilité de détection supérieure à la sensibilité nernstienne. Pour une utilisation du dispositif en tant que biocapteur, une fonctionnalisation de la surface des nanofils est nécessaire pour permettre l'accrochage de sondes d'ADN. La détection électronique de l'hybridation sondes/cibles de brins d'ADN complémentaires est démontrée avec un faible seuil de détection. Enfin, afin d'augmenter la surface d'échange entre le nanofil et les espèces chargées, un procédé de fabrication de résistances à base de nanofils suspendus est développé. Des tests de détection en présence d'ammoniac ont mis en évidence une réponse linéaire sur une gamme de concentrations. Les résistances à base de nanofils suspendus présentent une plus grande sensibilité que celles à base de nanofils non suspendus, mettant en avant l'effet important de la surface des nanofils. Tous ces résultats permettent de démontrer la faisabilité de capteurs chimiques et biologiques à base de nanofils de silicium à partir des techniques conventionnelles de la microélectronique en utilisant un procédé de fabrication « bas-coût ». / The goal of this research work is the realization of devices based on silicon nanowires, realized using sidewall spacer formation technique. Nanowires are synthesized form a polycrystalline silicon layer deposited by LPCVD technique (Low Pressure Chemical Vapor Deposition). These nanowires are then integrated into electronic devices such as resistors and transistors made using two different configurations “bottom-gate” and “step-gate”. The electrical characteristics of these two types of transistors have shown adequate electrical properties for their use as sensors. A simulation is made, to explain how additional electrical charges on the surface of the nanowires, affect the electron concentration inside the active layer. The devices are firstly used for the pH measurement, and have shown sensitivity higher than the Nernstian sensitivity detection. For a use as biosensor, nanowires are functionnalized to allow the binding of DNA probes. Electronic detection of hybridization complementary probe/target DNA strands is demonstrated with a low detection limit. Finally, in order to increase the exchange surface between the nanowires and charged species, resistors based on suspended nanowires were developed. Different tests were performed in the presence of ammonia and showed a linear response over a range of concentrations. Resistors based on suspended nanowires highlighted greater sensitivity than those based on unsuspended nanowires, bringing out the important effect of the surface of the nanowires. All these results demonstrate the feasibility of chemical and biological sensors based on silicon nanowires compatible with conventional microelectronics techniques using a low-cost process.

Tumores de mama podem ser categorizados pela expressão de diferentes receptores, como por exemplo o HER-2 (receptor de fator de crescimento epidérmico 2), sendo amplamente estudada a utilização do fármaco inibidor do receptor da tirosina–quinase, ditosilato de lapatinib. Nesse sentido, o trabalho está centrado no desenvolvimento farmacotécnico e caracterização físico-química de nanocápsulas multiparede revestidas com polissorbato 80 e fosfatidilcolina (LIPOID S75®), seguidas de revestimento com quitosana, contendo ditosilato de lapatinib (25μg/mL e 50μg/mL). Estudos físico-químicos da fase orgânica e das nanocápsulas contendo LIPOID S75®, em diferentes concentrações, foram desenvolvidos através de medidas de viscosidade, tensão superficial e analise de calorimetria exploratória diferencial, correlacionando com o tamanho de partícula e interação da fosfatidilcolina no sistema. A partir disso, escolheu-se a maior concentração de LIPOID S75® testada, para desenvolver as nanocápsulas multiparede complexadas com metal e fenilalanina contendo ditosilato de lapatinib (Lap25-P5-Q-Fe-Phe; Lap50-P5-Q-Fe-Phe; Lap25-P5-Q-Zn-Phe; Lap50-P5-Q-Zn-Phe). As formulações contendo fármaco apresentaram distribuição unimodal de partículas na faixa nanométrica, (111 - 172 nm) e baixo índice de polidispersão. A faixa de potencial zeta obtida (+16 - +22 mV) indicou o revestimento da partícula pela quitosana. O ditosilato de lapatinib foi quantificado por cromatografia líquida de alta eficiência (HPLC). A fase móvel do método consistiu em acetonitrila:acetato de amônio 0,02M (70:30), vazão de 1,0 mL/min com detecção em 260 nm. As suspensões contendo 25 μg/mL e 50 μg/mL de fármaco apresentaram teor entre 93% e 91%, respectivamente. A eficiência de encapsulação (EE%) foi acima de 90%. O conjunto destes estudos demonstra que nanocápsulas desenvolvidas são potenciais candidatas para ensaios biológicos in vitro. / Breast tumors may be categorized by the expression of different receptors such as HER-2 (growth factor epidermal receptor 2), The use of the inhibitor drug receptor tyrosine-kinase lapatinib ditosylate (Tyverb®, GlaxoSmithKline) has been widely studied. In this sense, the work is focused on pharmaceutics development and physicochemical characterization of multiwall nanocapsules coated with polysorbate 80 and phosphatidylcholine (Lipoid S75®), followed by coating with chitosan containing lapatinib ditosylate (25 μ/mL and 50 μg/mL). Physicochemical studies of the organic phase and nanocapsules containing Lipoid S75® at different concentrations were developed by viscosity, surface tension analysis and differential scanning calorimetry, correlated with the particle size and interaction of phosphatidylcholine in the system From this, we have chosen the highest concentration of lipoid S75® tested to develop complexed nanocapsules multiparede with metal and phenylalanine containing lapatinib ditosylate (Lap25-P5-Phe-Phe-Q; Lap50-P5-Q -Fc-Phe; Lap25-P5-O-Zn-Phe; Lap50-P5-Zn-O-Phe). Formulations containing lapatinib ditosylate showed unimodal distribution of particles in the nanometer range (111-172 nm) and low polydispersity index. The obtained zeta potential range (+16 - +22 mV) indicated by the chitosan particle coating. The lapatinib ditosylate was quantified by high-performance liquid chromatography (HPLC). The mobile phase consisted method in acetonitrile: 0.02M ammonium acetate (70:30), flow 1.0 mLmin-1 with detection at 260 nm. The suspensions containing 25 ugmL-1 and 50 ugmL-1 showed drug content of between 93% and 91%, respectively. The encapsulation efficiency (EE%) was above 90%. Together these studies demonstrate that the nanocapsules are potential candidates for in vitro biological assays.

abstract: The molecular modification of semiconductors has applications in energy conversion and storage, including artificial photosynthesis. In nature, the active sites of enzymes are typically earth-abundant metal centers and the protein provides a unique three-dimensional environment for effecting catalytic transformations. Inspired by this biological architecture, a synthetic methodology using surface-grafted polymers with discrete chemical recognition sites for assembling human-engineered catalysts in three-dimensional environments is presented. The use of polymeric coatings to interface cobalt-containing catalysts with semiconductors for solar fuel production is introduced in Chapter 1. The following three chapters demonstrate the versatility of this modular approach to interface cobalt-containing catalysts with semiconductors for solar fuel production. The catalyst-containing coatings are characterized through a suite of spectroscopic techniques, including ellipsometry, grazing angle attenuated total reflection Fourier transform infrared spectroscopy (GATR-FTIR) and x-ray photoelectron (XP) spectroscopy. It is demonstrated that the polymeric interface can be varied to control the surface chemistry and photoelectrochemical response of gallium phosphide (GaP) (100) electrodes by using thin-film coatings comprising surface-immobilized pyridyl or imidazole ligands to coordinate cobaloximes, known catalysts for hydrogen evolution. The polymer grafting chemistry and subsequent cobaloxime attachment is applicable to both the (111)A and (111)B crystal face of the gallium phosphide (GaP) semiconductor, providing insights into the surface connectivity of the hard/soft matter interface and demonstrating the applicability of the UV-induced immobilization of vinyl monomers to a range of GaP crystal indices. Finally, thin-film polypyridine surface coatings provide a molecular interface to assemble cobalt porphyrin catalysts for hydrogen evolution onto GaP. In all constructs, photoelectrochemical measurements confirm the hybrid photocathode uses solar energy to power reductive fuel-forming transformations in aqueous solutions without the use of organic acids, sacrificial chemical reductants, or electrochemical forward biasing. / Dissertation/Thesis / Doctoral Dissertation Biochemistry 2018

The reaction of base-free Chan-Lam coupling was successfully used for functionalization of surface of mesoporous silica gel. Various aromatic, aliphatic, and heterocyclic compounds were immobilized by a copper-catalyzed reaction of corresponding boronic acids with surface amino groups at mild conditions. Obtained functionalized materials were mesoporous although their surface area decreased after immobilization. The reactivity of some surface functional groups was tested in their characteristic reactions.

L'apparition d’un développement cancérigène est souvent caractéristique des tumeurs de la région de la tête et du cou. En raison des altérations prémalignes et malignes fréquentes, il n'est souvent pas possible de supprimer complètement la tumeur par chirurgie.Il en résulte un risque élevé de récidive tumorale. Par conséquent, cette recherche de doctorat vise à développer des nanoparticules photocatalytiques (NPs) qui seront utilisées localement en complément de la thérapie tumorale traditionnelle. Ces NPs, une fois absorbées par les cellules tumorales induiront la mort des cellules photocatalytiques par activation de lumière UV. Des NPs de TiO2 ayant des propriétés photocatalytiques et une taille moyenne inférieure à 20 nm étaient donc synthétisées. La biocompatibilité des NPs, leur absorption dans les cellules et un ciblage tumoral efficace devraient être garantis par une modification de surface des particules avec des molécules organiques dendritiques permettant un contrôle précis de la charge de surface des particules ainsi que la possibilité de couplage avec des anticorps. Un autre objectif était la combinaison de propriétés thérapeutiques et diagnostiques dans le système de NPs par exemple réalisé par incorporation d'agent luminescent. Cette recherche était menée à l'Université de Bordeaux (synthèse des molécules organiques pour la fonctionnalisation des particules) en coopération avec l'Institut Fraunhofer de recherche en silicate ISC à Würzburg, Allemagne (synthèse des nanoparticules). / The occurrence of field cancerization is characteristic for tumours of the head and neck region. Due to these widespread premalignant and malignant alterations, it is frequently not possible to entirely remove the tumour by surgery. This results in a high risk of tumour recurrence. Therefore, this PhD research aimed to develop photocatalytic nanoparticles (NPs) as completion of the traditional tumour therapy. These NPs are supposed to be incorporated by tumour cells and to induce photocatalytic cell death by UV light activation. TiO2 with convincing photocatalytic properties and an average size smaller than 20 nm should therefore be synthesized. NP biocompatibility, their uptake into cells and an efficient tumour targeting should be guaranteed by surface modification of the particles with dendritic organic molecules that allow a precise control of the surface charge of the particles as well as antibody coupling.A further objective was the combination of therapeutic and diagnostic properties within the NPsystem realized for example via introduction of a luminescent dye. This research was carried out at the University of Bordeaux (synthesis of organic molecules for particle functionalization) in cooperation with the Fraunhofer Institute for Silicate Research ISC in Würzburg, Germany (nanoparticle synthesis).

The trend over the last 50 years of down-scaling the silicon transistor to achieve faster computations has led to doubling of the number of transistors and computation speed over about every two years. However, this trend cannot be maintained due to the fundamental limitations of silicon as the main material for the semiconducting industry. Therefore, there is an active search for exploration of alternate materials. Among the possible candidates that can may [sic] be able to replace silicon is graphene which has recently gained the most attention. Unique properties of graphene include exceedingly high carrier mobility, tunable band gap, huge optical density of a monolayer, anomalous quantum Hall effect, and many others. To be suitable for microelectronic applications the material should be semiconductive, i.e. have a non-zero band gap. Pristine graphene is a semimetal, but by the virtue of doping the graphene surface with different molecules and radicals a band gap can be opened. Because the electronic properties of all materials are intimately related to their atomic structure, characterization of molecular and electronic structure of functionalizing groups is of high interest. The ab-inito (from the first principles) calculations provide a unique opportunity to study the influence of the dopants and thus allow exploration of the physical phenomena in functionalized graphene structures. This ability paves the road to probe the properties based on the intuitive structural information only. A great advantage of this approach lies in the opportunity for quick screening of various atomic structures. We conducted a series of ab-inito investigations of graphene functionalized with covalently and hapticly bound groups, and demonstrated possible practical usage of functionalized graphene for microelectronic and optical applications. This investigation showed that it is possible [to] produce band gaps in graphene (i.e., produce semiconducting graphene) of about 1 eV, without degrading the carrier mobility. This was archived by considering the influence of those adducts on electronic band structure and conductivity properties.