Spelling suggestions: "subject:"tethered"" "subject:"gethered""
1 |
Modeling and analysis of tethered systems performing orbital maneuvers /Jokic, Michael. January 2004 (has links) (PDF)
Thesis (Ph.D.) - University of Queensland, 2005. / Includes bibliography.
|
2 |
Satellite placement using a partial space elevatorWoo, Pamela. January 2009 (has links)
The space elevator has been proposed as an alternate method for launching cargo into space. However, the construction of such a structure requires a material much stronger than any currently in existence. Instead, a partial elevator is considered for satellite placement. In the first part of the thesis, the fundamentals of very long tethered systems are studied. From static analysis on a simple two-body system, it is demonstrated that an assumption made in the conventional analysis does not apply to very long tethered systems. For a uniform tether, the axial stress distribution is obtained. Following the Lagrangian approach, the equations of motion governing the planar librations of a multi-body tethered system are derived. From a linearization of these equations, the libration frequencies are found. Then, by solving the nonlinear equations numerically, the responses to various changes in the system parameters are determined. In the second part of the thesis, the use of a partial elevator in satellite placement is studied. In the case of single climber transit, residual librations occur, which alter the shape and size of the orbit of a satellite launched from the climber. An approach using two climbers is investigated in order to decrease the residual libration and thereby reduce orbit placement errors. Also, some energy calculations are done to determine whether the partial elevator offers significant advantages.
|
3 |
TETHERED POLYMERS: KINETICS AND CONTROLHuang, Heqing 01 January 2004 (has links)
This dissertation describes a study of the kinetics of formation of tethered polymer layers. Polymer chains diffuse from dilute solution to the surface a solid, to which they become attached by one end. Kinetics profiles composed of three distinct regimes are displayed by all tethering reactions studied in the absence of segmental adsorption, regardless of solvent quality, temperature, chemistry of polymer, architecture of polymer, and type of reactive site on the surface. The first regime, fast and predicted previously by theory, is controlled by diffusion of the polymer chains through solution to the bare surface. The second regime, slow and also predicted by theory, is controlled by diffusion of the polymer chains through the already tethered layer. The third regime, relatively fast and not predicted by theory, appears to be the consequence of cooperative interaction between incoming chains and tethered chains. During the tethering process, each tethered polymer chain changes from a random-coil-like configuration to a vertically stretched configuration. The end of the first regime corresponds to completion of a layer of nonoverlapping, coil-like tethered chains, called a mushroom layer. Cessation of tethering corresponds to a layer of vertically stretched chains, called a polymer brush. Transition from mushroom to brush mainly takes place in the third regime and develops in spatially nonuniform manner. The understanding gained about the kinetics of tethering was used to construct simply tethered layers, bi-component tethered layers, bidisperse (two molecular weights) tethered layers, and tethered layers of mixed architecture (linear and star-branched).
|
4 |
Satellite placement using a partial space elevatorWoo, Pamela. January 2009 (has links)
No description available.
|
5 |
Satellite tether systems dynamic modeling and control /Mankala, Kalyan K. January 2006 (has links)
Thesis (Ph.D.)--University of Delaware, 2006. / Principal faculty advisor: Sunil K. Agrawal, Dept. of Mechanical Engineering. Includes bibliographical references.
|
6 |
Tethered Payload Control from an Autonomous HelicopterMay, James 26 October 2010 (has links)
A system is designed to deploy and support a tethered ground robot from an autonomous helicopter. A winch is designed and built. Electrical hardware for power distribution and control are designed. Several applied controls problems are investigated. A control architecture is established and low level controllers are designed to meet the demands of two higher level algorithms. A tether tension controller is designed to avoid the danger of excess slack in the tether interfering with the robot's mobility. A payload sway damping controller is investigated and simulated. Its is shown to be effective in damping dangerous payload oscillations by modulating the vertical manipulation of the winch during hoisting. Future design recommendations are given regarding improvements for a second design iteration. / Master of Science
|
7 |
The Performance Test of an Initial iNET-Like RF Network Using a Tethered Aerostat in JapanTanaka, Toshihisa, Aoyama, Daiki, Ito, Sei 10 1900 (has links)
ITC/USA 2015 Conference Proceedings / The Fifty-First Annual International Telemetering Conference and Technical Exhibition / October 26-29, 2015 / Bally's Hotel & Convention Center, Las Vegas, NV / Through the use of early iNET-prototype IP Transceiver technology, Kawasaki Heavy Industries, Ltd. (KHI) has been able to communicate with flight test vehicles during a recent research program. This technology provides a two-way high-capacity communication that has not been achieved with conventional telemetry and can be used not only for flight testing, but also for rescue work. KHI has been authorized to use S-band IP Transceivers since last year in Japan, and various communication tests have been performed. This paper describes Japan's first simulation of an iNET RF network which incorporated testing that performed data backfill, voice communication and video transmission. A data backfilling test was performed using retransmit of lock-off data (which is lost as the aircraft maneuvers) on command from the ground station. Moreover, a tethered aerostat is considered a very useful communication relay platform in the event of a large-scale disaster which results in the destruction of infrastructure. Also, the silence of an aerostat can be very important for search and rescue work.
|
8 |
Identification of a tethered satellite using an extended Kalman filterHayes, Elizabeth Jo Volovecky, Cicci, David A. January 2007 (has links) (PDF)
Thesis(M.S.)--Auburn University, 2007. / Abstract. Vita. Includes bibliographic references (p.35-36).
|
9 |
Tethered Polymer Chains on Single Crystal SurfacesVan Horn, Ryan M. 01 September 2009 (has links)
No description available.
|
10 |
Design of a Helicopter Slung Vehicle for Actuated Payload PlacementCollins, Robert James 29 April 2012 (has links)
Helicopters have been used in applications where they need to carry a slung load for years. More recently, unmanned (UAV) helicopters are being used to deliver supplies to military units on the ground in theaters of war. This thesis presents a helicopter slung vehicle used to carry the payload and furthermore, provide a means of actuation for the payload. This provides more control authority to the system and may ultimately allow a helicopter to fly higher with a longer tether.
The vehicle designed in this thesis was designed for use with 100kg class helicopters, such as the Yamaha RMAX operated by the Virginia Tech Unmanned Systems Lab. Each system on the vehicle was custom designed — including the propulsion system, wall detection / localization system, and controller. Three shrouded propellers provided thruster actuation. A scanning laser range finder and inertial measurement unit (IMU) were used to provide localization. A first attempt at a linear full state feedback controller with a complementary filter was used to control the vehicle.
All of the systems were tested individually for functionality. The shrouded propellers met their design goals and were capable of producing .7lbf of thrust each. The wall detection system was able to detect walls and windows reliably and with repeatability. Results from the controller however were less than ideal, as it was only able to control yaw in an oscillatory motion, most likely due to model deficiencies. A reaction wheel was used to control yaw of the vehicle with more success. / Master of Science
|
Page generated in 0.0491 seconds