Generally it is believed that in a power station when there is a demand for process steam and also demand for heating, most of the auxiliaries of the plant should be arranged to be driven by steam rather than using electrical energy for them. This is, however, a general remark and a correct selection can be made only after a detailed study is made of all factors involved. The V. P. I. central heating and power plant works mainly as a heating station, generation of electrical energy, being a by-product. So this problem is completely different from the standpoint of a general power station. This station supplies heating steam to the college through two different pressure lines. One is the low pressure, and the other is the high pressure line. / Master of Science

Through this thesis evidence will be collected to determine the need of a proposed turbo-generator and boiler unit adequate for future requirements of the campus and community of Blacksburg. / Master of Science

No description available.

This thesis is an approach of numerical optimization of thermal design of the ocean turbine developed by the Centre of Ocean Energy and Technology (COET). The technique used here is the integrated method of finite element analysis (FEA) of heat transfer, artificial neural network (ANN) and genetic algorithm (GA) for optimization purposes. / by Khaled Kaiser. / Thesis (M.S.C.S.)--Florida Atlantic University, 2009. / Includes bibliography. / Electronic reproduction. Boca Raton, Fla., 2009. Mode of access: World Wide Web.

Thesis (MEng)--Stellenbosch University, 2014. / ENGLISH ABSTRACT: The potential benefits from saving energy have driven most industrial processing facilities to pay more attention to reducing energy wastage. Because the industrial sector is the largest user of electricity in South Africa (37.7% of the generated electricity capacity), the application of waste heat recovery and utilisation (WHR&U) systems in this sector could lead to significant energy savings, a reduction in production costs and an increase in the efficiency of industrial processes. Turbines are critical components of WHR&U systems, and the choice of an efficient and low cost turbine is crucial for their successful implementation. The aim of this thesis project is therefore to validate the use of a turbine for application in a low grade energy WHR&U system. An experimental turbine kit (Infinity Turbine ITmini) was acquired, assembled and tested in a specially designed and built air test bench. The test data was used to characterise the turbine for low temperature (less than 120 Celsius) and pressure (less than 10 bar) conditions. A radial inflow turbine rotor was designed, manufactured and then tested with the same test bench, and its performance characteristics determined. In comparison with the ITmini rotor, the as-designed and manufactured rotor achieved a marginally better performance for the same test pressure ratio range. The as-designed turbine rotor performance characteristics for air were then used to scale the turbine for a refrigerant-123 application. Future work should entail integrating the turbine with a WHR&U system, and experimentally determining the system’s performance characteristics. / AFRIKAANSE OPSOMMING: Die potensiële voordele wat gepaard gaan met energiebesparing het die fokus van industrie laat val op die bekamping van energievermorsing. Die industriële sektor is die grootse verbruiker van elektrisiteit in Suid-Afrika (37.7% van die totale gegenereerde kapasiteit). Energiebesparing in die sektor deur die toepassing van afval-energie-herwinning en benutting (AEH&B) sisteme kan lei tot drastiese vermindering van energievermorsing, ‘n afname in produksie koste en ‘n toename in die doeltreffendheid van industriële prosesse. Turbines is kritiese komponente in AEH&B sisteme en die keuse van ‘n doeltreffende lae koste turbine is noodsaaklik in die suksesvolle implementering van dié sisteme. Die doelwit van hierdie tesisprojek is dus om die toepassing van ‘n turbine in ‘n lae graad energie AEH&B sisteem op die proef te stel. ‘n Eksperimentele turbine stel (“Infinity Turbine ITmini”) is aangeskaf, aanmekaargesit en getoets op ‘n pasgemaakte lugtoetsbank. Die toetsdata is gebruik om die turbine te karakteriseer by lae temperatuur (minder as 120 Celsius) en druk (minder as 10 bar) kondisies. ‘n Radiaalinvloeiturbinerotor is ook ontwerp, vervaardig en getoets op die lugtoetsbank om die rotor se karakteristieke te bepaal. In vergelyking met die ITmini-rotor het die radiaalinvloeiturbinerotor effens beter werkverrigting gelewer by diselfde toetsdruk verhoudings. Die werksverrigtingkarakteristieke met lug as vloeimedium van die radiaalinvloeiturbinerotor is gebruik om die rotor te skaleer vir ‘n R123 verkoelmiddel toepassing. Toekomstige werk sluit in om die turbine met ‘n AEH&B sisteem te integreer en die sisteem se werksverrigtingkarakteristieke te bepaal.

Indiana University-Purdue University Indianapolis (IUPUI) / A gearless hydraulic wind energy transfer system utilizes the hydraulic power transmission principles to integrate the energy of multiple wind turbines in a central power generation location. The gearless wind power transfer technology may replace the current energy harvesting system to reduce the cost of operation and increase the reliability of wind power generation. It also allows for the integration of multiple wind turbines to one central generation unit, unlike the traditional wind power generation with dedicated generator and gearbox. A Hydraulic Transmission (HT) can transmit high power and can operate over a wide range of torque-to-speed ratios, allowing efficient transmission of intermittent wind power. The torque to speed ratios illustrates the relationship between the torque and speed of a motor (or pump) from the moment of start to when full-load torque is reached at the manufacturer recommended rated speed. In this thesis, a gearless hydraulic wind energy harvesting and transfer system is mathematically modeled and verified by experimental results. The mathematical model is therefore required to consider the system dynamics and be used in control system development. Mathematical modeling also provided a method to determine the losses of the system as well as overall efficiency. The energy is harvested by a low speed-high torque wind turbine connected to a high fixed-displacement hydraulic pump, which is connected to hydraulic motors. Through mathematical modeling of the system, an enhanced understanding of the HTS through analysis was gained that lead to a highly efficient hydraulic energy transmission system. It was determined which factors significantly influenced the system operation and its efficiency more. It was also established how the overall system operated in a multiple wind turbine configuration. The quality of transferred power from the wind turbine to the generator is important to maintaining the systems power balance, frequency droop control in grid-connected applications, and to ensure that the maximum output power is obtained. A hydraulic transmission system can transfer large amounts of power and has more flexibility than a mechanical and electrical system. However high-pressure hydraulic systems have shown low efficiency in wind power transfer when interfaced with a single turbine to a ground-level generator. HT’s generally have acceptable efficiency at full load and drop efficiency as the loading changes, typically having a peak around 60%. The efficiency of a HT is dependent on several parameters including volumetric flow rate, rotational speed and torque at the pump shaft, and the pressure difference across the inlet and outlet of the hydraulic pump and motor. It has been demonstrated that using a central generation unit for a group of wind turbines and transferring the power of each turbine through hydraulic system increases the efficiency of the overall system versus one turbine to one central generation unit. The efficiency enhancement depends on the rotational speed of the hydraulic pumps. Therefore, it is proven that the multiple-turbine hydraulic power transfer system reaches higher efficiencies at lower rotational speeds. This suggests that the gearbox can be eliminated from the wind powertrains if multiple turbines are connected to the central generation unit. Computer simulations and experimental results are provided to quantify the efficiency enhancements obtained by adding the second wind turbine hydraulic pump to the system.