Spelling suggestions: "subject:"farm asphalt"" "subject:"arm asphalt""
1 |
Análise viscoelástica de misturas asfálticas quentes e mornasMensch, Natália Guterres January 2017 (has links)
A caracterização das propriedades visco-elástico-plásticas dos materiais asfálticos são importantes para uma melhor compreensão do comportamento mecânico e performance de pavimentos. O módulo complexo visa caracterizar as propriedades viscoelásticas lineares do material presente no campo das pequenas deformações. O ensaio para obtenção do módulo dinâmico pode ser realizado a partir de um carregamento senoidal uniaxial de compressão com frequências que podem variar de 0,1Hz a 25Hz e com temperaturas de -10°C a 54°C. O valor absoluto do módulo complexo é conhecido como módulo dinâmico |E*|, que pode ser definido como uma relação entre a amplitude de tensão e a amplitude de deformação. Já, a defasagem entre a tensão e a deformação é conhecida como ângulo de fase, que é um indicador das propriedades viscosas do material. Esta dissertação possuiu como objetivo caracterizar as propriedades viscoelásticas das misturas asfálticas quentes e mornas comumente utilizadas no Rio Grande do Sul, utilizando um aditivo surfactante para as misturas mornas. Para tanto foram dosadas 4 misturas asfálticas com agregados basálticos e os ligantes CAP 50/70, AMP 60/85, AB8 e CAP TLA e obtidos os parâmetros de adesividade e resistência dessas misturas quentes e mornas. Para a realização do ensaio de módulo dinâmico foi realizado uma revisão bibliográfica sobre os procedimentos de ensaio e análise de dados, posteriormente, foi adotada a metodologia adequada para os ensaios. Os mesmos foram realizados utilizando uma prensa universal MTS e a análise dos dados foi realizada com o auxílio das ferramentas do Microsoft Excel. Através do estudo foi possível concluir que as misturas com ligante convencional possuem um comportamento similar entre a mistura convencional e a morna. O mesmo não ocorre nas misturas com ligante modificado, onde ocorre uma alteração tanto da fase viscosa como da elástica, sendo esse efeito mais predominante nas misturas modificadas por polímero. / The characterization of the viscoelastic-plastic properties of asphaltic materials are important for a better understanding of the pavements’ mechanical behavior and performance. The complex module aims to characterize as linear viscoelastic properties of the material present in the field of small deformations. The assay for obtaining the dynamic modulus can be performed from a compression uniaxial sinusoidal loading with frequencies ranging from 0.1Hz to 25Hz and temperatures from -10 °C to 54 °C. The absolute value of the complex modulus is known as dynamic module | E * |, which is defined as a relation between a stress amplitude and a strain amplitude. Already, a discrepancy between stress and strain is known as phase angle, which is an indicator of the viscous properties of the material. This dissertation aimed to characterize as viscoelastic properties of hot and warm asphalt mixtures commonly used in Rio Grande do Sul, using a surfactant additive for warm mixtures. In order to do so, four asphalt concrete mixes - composed with the basalt aggregates and binders CAP 50/70, AMP 60/85, AB 8 and CAP TLA – were designed. In addition, the parameters of adhesiveness and resistance to hot and warm mixtures were obtained. For a dynamic modulus test, a literature review was performed about the data analysis and test procedure, and a suitable methodology for testing was subsequently adopted. The tests were realized with an universal testing machine of MTS and the data analysis were performed by means of the Microsoft Excel tools. Through the study it was possible to conclude that mixtures with conventional binder presented similar behavior between a conventional and a warm mixture. The same does not occur in mixtures with modified binder, where a change in both the viscous and the elastic phases occurs, and this effect is more predominant in the polymer modified mixtures.
|
2 |
Análise viscoelástica de misturas asfálticas quentes e mornasMensch, Natália Guterres January 2017 (has links)
A caracterização das propriedades visco-elástico-plásticas dos materiais asfálticos são importantes para uma melhor compreensão do comportamento mecânico e performance de pavimentos. O módulo complexo visa caracterizar as propriedades viscoelásticas lineares do material presente no campo das pequenas deformações. O ensaio para obtenção do módulo dinâmico pode ser realizado a partir de um carregamento senoidal uniaxial de compressão com frequências que podem variar de 0,1Hz a 25Hz e com temperaturas de -10°C a 54°C. O valor absoluto do módulo complexo é conhecido como módulo dinâmico |E*|, que pode ser definido como uma relação entre a amplitude de tensão e a amplitude de deformação. Já, a defasagem entre a tensão e a deformação é conhecida como ângulo de fase, que é um indicador das propriedades viscosas do material. Esta dissertação possuiu como objetivo caracterizar as propriedades viscoelásticas das misturas asfálticas quentes e mornas comumente utilizadas no Rio Grande do Sul, utilizando um aditivo surfactante para as misturas mornas. Para tanto foram dosadas 4 misturas asfálticas com agregados basálticos e os ligantes CAP 50/70, AMP 60/85, AB8 e CAP TLA e obtidos os parâmetros de adesividade e resistência dessas misturas quentes e mornas. Para a realização do ensaio de módulo dinâmico foi realizado uma revisão bibliográfica sobre os procedimentos de ensaio e análise de dados, posteriormente, foi adotada a metodologia adequada para os ensaios. Os mesmos foram realizados utilizando uma prensa universal MTS e a análise dos dados foi realizada com o auxílio das ferramentas do Microsoft Excel. Através do estudo foi possível concluir que as misturas com ligante convencional possuem um comportamento similar entre a mistura convencional e a morna. O mesmo não ocorre nas misturas com ligante modificado, onde ocorre uma alteração tanto da fase viscosa como da elástica, sendo esse efeito mais predominante nas misturas modificadas por polímero. / The characterization of the viscoelastic-plastic properties of asphaltic materials are important for a better understanding of the pavements’ mechanical behavior and performance. The complex module aims to characterize as linear viscoelastic properties of the material present in the field of small deformations. The assay for obtaining the dynamic modulus can be performed from a compression uniaxial sinusoidal loading with frequencies ranging from 0.1Hz to 25Hz and temperatures from -10 °C to 54 °C. The absolute value of the complex modulus is known as dynamic module | E * |, which is defined as a relation between a stress amplitude and a strain amplitude. Already, a discrepancy between stress and strain is known as phase angle, which is an indicator of the viscous properties of the material. This dissertation aimed to characterize as viscoelastic properties of hot and warm asphalt mixtures commonly used in Rio Grande do Sul, using a surfactant additive for warm mixtures. In order to do so, four asphalt concrete mixes - composed with the basalt aggregates and binders CAP 50/70, AMP 60/85, AB 8 and CAP TLA – were designed. In addition, the parameters of adhesiveness and resistance to hot and warm mixtures were obtained. For a dynamic modulus test, a literature review was performed about the data analysis and test procedure, and a suitable methodology for testing was subsequently adopted. The tests were realized with an universal testing machine of MTS and the data analysis were performed by means of the Microsoft Excel tools. Through the study it was possible to conclude that mixtures with conventional binder presented similar behavior between a conventional and a warm mixture. The same does not occur in mixtures with modified binder, where a change in both the viscous and the elastic phases occurs, and this effect is more predominant in the polymer modified mixtures.
|
3 |
Análise viscoelástica de misturas asfálticas quentes e mornasMensch, Natália Guterres January 2017 (has links)
A caracterização das propriedades visco-elástico-plásticas dos materiais asfálticos são importantes para uma melhor compreensão do comportamento mecânico e performance de pavimentos. O módulo complexo visa caracterizar as propriedades viscoelásticas lineares do material presente no campo das pequenas deformações. O ensaio para obtenção do módulo dinâmico pode ser realizado a partir de um carregamento senoidal uniaxial de compressão com frequências que podem variar de 0,1Hz a 25Hz e com temperaturas de -10°C a 54°C. O valor absoluto do módulo complexo é conhecido como módulo dinâmico |E*|, que pode ser definido como uma relação entre a amplitude de tensão e a amplitude de deformação. Já, a defasagem entre a tensão e a deformação é conhecida como ângulo de fase, que é um indicador das propriedades viscosas do material. Esta dissertação possuiu como objetivo caracterizar as propriedades viscoelásticas das misturas asfálticas quentes e mornas comumente utilizadas no Rio Grande do Sul, utilizando um aditivo surfactante para as misturas mornas. Para tanto foram dosadas 4 misturas asfálticas com agregados basálticos e os ligantes CAP 50/70, AMP 60/85, AB8 e CAP TLA e obtidos os parâmetros de adesividade e resistência dessas misturas quentes e mornas. Para a realização do ensaio de módulo dinâmico foi realizado uma revisão bibliográfica sobre os procedimentos de ensaio e análise de dados, posteriormente, foi adotada a metodologia adequada para os ensaios. Os mesmos foram realizados utilizando uma prensa universal MTS e a análise dos dados foi realizada com o auxílio das ferramentas do Microsoft Excel. Através do estudo foi possível concluir que as misturas com ligante convencional possuem um comportamento similar entre a mistura convencional e a morna. O mesmo não ocorre nas misturas com ligante modificado, onde ocorre uma alteração tanto da fase viscosa como da elástica, sendo esse efeito mais predominante nas misturas modificadas por polímero. / The characterization of the viscoelastic-plastic properties of asphaltic materials are important for a better understanding of the pavements’ mechanical behavior and performance. The complex module aims to characterize as linear viscoelastic properties of the material present in the field of small deformations. The assay for obtaining the dynamic modulus can be performed from a compression uniaxial sinusoidal loading with frequencies ranging from 0.1Hz to 25Hz and temperatures from -10 °C to 54 °C. The absolute value of the complex modulus is known as dynamic module | E * |, which is defined as a relation between a stress amplitude and a strain amplitude. Already, a discrepancy between stress and strain is known as phase angle, which is an indicator of the viscous properties of the material. This dissertation aimed to characterize as viscoelastic properties of hot and warm asphalt mixtures commonly used in Rio Grande do Sul, using a surfactant additive for warm mixtures. In order to do so, four asphalt concrete mixes - composed with the basalt aggregates and binders CAP 50/70, AMP 60/85, AB 8 and CAP TLA – were designed. In addition, the parameters of adhesiveness and resistance to hot and warm mixtures were obtained. For a dynamic modulus test, a literature review was performed about the data analysis and test procedure, and a suitable methodology for testing was subsequently adopted. The tests were realized with an universal testing machine of MTS and the data analysis were performed by means of the Microsoft Excel tools. Through the study it was possible to conclude that mixtures with conventional binder presented similar behavior between a conventional and a warm mixture. The same does not occur in mixtures with modified binder, where a change in both the viscous and the elastic phases occurs, and this effect is more predominant in the polymer modified mixtures.
|
4 |
Propuesta de una carpeta de Warm Mix Asphalt con adición de caucho reciclado para mejorar la respuesta de las vías en intersecciones urbanas ante los efectos de congestión y sobrecarga vehicular. Caso: Jr. García Naranjo y Av. Mendoza Merino, en el Distrito de La Victoria, Lima / Proposal of a Warm Mix Asphalt pavement with the addition of recycled rubber to improve the response of urban intersection roads to the effects of congestion and vehicular overload. Case: Street García Naranjo and Mendoza Merino Avenue, in the District of La Victoria, LimaMarceliano Alcantara, Luis Alberto, Sandoval Moreno, Lucero Francia 02 July 2021 (has links)
En muchas ciudades el crecimiento de la congestión vehicular es mayor al crecimiento poblacional. Las ciudades con mayor congestión en el mundo son Bombay, Bogotá y Lima. Esta última cuenta con un nivel de congestión vehicular aproximado del 66%, este se puede medir mediante la saturación de la vía realizando un estudio HCM.
Estudios previos han analizado la influencia de la temperatura, velocidad, y carga sobre la carpeta asfáltica. Debido a esto, el impacto de la congestión debería considerarse en el diseño de pavimentos urbanos. La investigación, verificó que la congestión tiene una influencia en el incremento de la temperatura de la superficie del pavimento, la reducción de la velocidad y el aumento de carga vehicular. Se calculó que a mayor temperatura y menor velocidad se reduce el módulo de elasticidad de la carpeta asfáltica. Para esto, se consideró una diferencia de temperatura con y sin congestión, de 35°C y 25°C respectivamente.
Se ha propuesto una carpeta asfáltica tibia con adición de caucho al 18% que pueda soportar los efectos de la congestión vehicular. Se buscó reducir las deformaciones máximas de la carpeta y aumentar el número de ciclos de repetición de carga que puede soportar el pavimento, para que estos sean adecuados a los efectos de la congestión. Esto se logra al incrementar el módulo de elasticidad.
Finalmente, se obtuvo un aumento del 45% en el módulo de elasticidad, una reducción del 50% de deformaciones permanentes, y un aumento del 500% aproximadamente en el número de ciclos de carga. / In many cities, the increase in traffic congestion is greater than population growth. The most congested cities in the world are Bombay, Bogota and Lima. The latter has an approximate congestion level of 66%, which can be measured by road saturation using an HCM study.
Previous studies have analyzed the influence of temperature, speed, and load on the asphalt surface. Because of this, the impact of congestion should be considered in urban pavement design. The research verified that congestion has an influence on the increase of pavement surface temperature, the reduction of speed and the increase of vehicular load. It was calculated that the higher the temperature and the lower the speed, the lower the modulus of elasticity of the asphalt layer. For this purpose, a temperature difference of 35°C and 25°C with and without congestion, respectively, was considered.
A warm asphalt pavement with 18% rubber was proposed to withstand the effects of vehicular congestion. The aim was to reduce the maximum deformations of the binder and increase the number of load repetition cycles that the pavement can withstand, so that they are adequate to the effects of congestion. This is achieved by increasing the modulus of elasticity.
Finally, a 45% increase in the modulus of elasticity, a 50% reduction in permanent deformations, and an increase of approximately 500% in the number of load cycles were obtained. / Tesis
|
5 |
Étude thermomécanique avancée de différents types d’enrobés recyclés tièdes avec additifs / Advanced thermomechanical study of different types of warm recycled asphalt with additivesPham, Nguyen Hoang 12 December 2014 (has links)
Cette thèse s’inscrit dans le cadre d’une collaboration entre le Laboratoire Génie Civil et Bâtiment (LGCB)/Laboratoire de Tribologie et Dynamique des Systèmes (LTDS) et l’entreprise Arkema, l’entreprise routière Malet, l’Agence de l’Environnement et de la Maîtrise de l’Énergie (ADEME). L’objectif de la thèse est l’étude du comportement thermomécanique des enrobés bitumineux, et spécifiquement les enrobés tièdes avec et sans agrégat d’enrobé (RAP, Reclaimed Asphalt Pavement), dans le but de prévoir leur durée de vie et d’optimiser leur dimensionnement dans un contexte de développement durable.Sept types d’enrobés bitumineux sont étudiés. Les enrobés diffèrent par leur procédé de fabrication, le pourcentage de RAP, les additifs et le pourcentage d’additif utilisé. Deux types de fabrications sont étudiées : à chaud (Hot Mix –HM) qui sert de référence et tièdes (Warm Mix –WM). Trois pourcentages de RAP sont considérés : 0%, 30% et 50%. Deux types d’additifs fournis par ARKEMA sont utilisés, ETIMA (E) et ETIMA-BIO (B), avec deux pourcentages, 0% et 0.4%. L’utilisation des enrobés tièdes contribue à réduire considérablement la consommation d’énergie, l’impact sanitaire et l’impact environnemental. D’autre part, l’ajout des RAP dans les enrobés permet d’augmenter le taux de recyclage des matières non renouvelables. Ces innovations participent à la prise en compte des enjeux du développement durable et de la préservation de l’environnement.Quatre types d’essais ont été réalisés. Ce sont : l’essai de module complexe, l’essai de fatigue, l’essai de retrait thermique empêché (TSRST) et l’essai de propagation d’ondes. Dans le domaine du comportement viscoélastique linéaire, les essais de module complexe sont réalisés sur une large gamme de températures (de -25°C à 45°C) et de fréquences (de 0.03Hz à 10Hz). Chaque test est dupliqué. Les résultats sont modélisés à l’aide du modèle analogique 2S2P1D qui a été développé au laboratoire LGCB de l’ENTPE. Ce modèle permet de modéliser correctement le comportement tridimensionnel viscoélastique linéaire des enrobés. Ensuite, le comportement en fatigue est étudié grâce à des essais de fatigue. Pour chaque matériau, quatre ou cinq éprouvettes sont testées. Quatre critères sont utilisés pour évaluer la durée de vie des matériaux. Puis, le comportement à basse température est caractérisé à l’aide de l’essai de retrait thermique empêché (TSRST). Pour chaque matériau, trois éprouvettes sont testées. Enfin, des essais de propagation d’ondes sont réalisés. La méthode de détermination du temps de vol des ondes « P » et des ondes « S » ainsi que la méthode Impact Résonance sont utilisées. Ces essais fournissent des mesures non destructives et faciles à réaliser. A partir de ces méthodes, on peut calculer les valeurs de modules et de coefficients de Poisson des matériaux.Soulignons que les essais réalisés permettent d’obtenir certain des paramètres utilisés pour le dimensionnement des chaussées. Un résultat essentiel de l’étude est la bonne performance des enrobés tièdes contenant des agrégats d’enrobés (RAP). / This PhD dissertation is part of the collaboration between the French Agency for Environment and Energy Management (ADEME), the companies Arkema and Malet and the Ecole Nationale de Travaux Publics de l’Etat (ENTPE). The aim of this dissertation is to study the thermo-mechanical behavior of asphalt mixes, specifically warm mix asphalts with and without Reclaimed Asphalt Pavement (RAP) in order to predict their fatigue life and to optimize their design by targeting sustainable development. Seven types of asphalt mixes are studied. They differ in their mixing method, RAP content, additives used and their content. Two types of mixing methods are studied: Hot Mix Asphalt (HMA), which serves as a reference, and Warm Mix Asphalt (WMA). Three RAP contents are considered: 0%, 30% and 50%. Two types of additives provided by Arkema are used : ETIMA (E) and ETIMA-BIO (B) with two contents for each of them (0% and 0.4%). The use of warm mix asphalt helps significantly reducing both energy consumption and the impact on health and environment. These innovations are significant contributions with respect to issues of sustainable development and environmental preservation. Four types of laboratory tests were performed: complex modulus tests, fatigue tests, Thermal Stress Restrained Specimen Tests (TSRST) and wave propagation tests. In the Linear ViscoElastic (LVE) behavior domain, complex modulus tests were performed on a wide range of temperatures (from -25°C to 45°C) and frequencies (from 0.03 Hz to 10 Hz). For each material, two specimens were tested. Values of complex modulus and complex Poisson’s ratio were obtained and modeled using the 2S2P1D analogies model, developed in the Laboratoire Génie Civil et Bâtiement (LGCB) of ENTPE. It was observed that this model can correctly simulate the LVE behavior of asphalt mixes. Fatigue behavior was studied by analyzing fatigue tests results. For each material, four or five specimens were tested. Four different failure criteria were used in order to evaluate fatigue life of materials. Low temperature behavior of materials was characterized using TSRST. For each material, three replicates were performed. Finally, wave propagation tests were carried out. The method to determine the time of flight of « P » and « S » waves and the impact resonance method are presented. These tests provide a non-destructive method to characterize materials, which easy to perform. Using those methods, values of complex modulus and Poisson's ratio of tested materials can be estimated. It is to be underlined that the tests performed in this PhD allow to obtaining some parameters which are required for asphalt pavement design. An important result obtained in this study is that warm mix asphalt combined with RAP and additives (ETIMA ou ETIMA-BIO) could perform as well as hot mix asphalt.
|
Page generated in 0.0323 seconds